u-boot/drivers/ddr/marvell/axp/ddr3_axp_vars.h

226 lines
10 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0 */
arm: mvebu: drivers/ddr: Add DDR3 driver with training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the AXP boot image. Not linked with the main U-Boot. With this code addition and the following serdes/PHY setup code, the Armada-XP support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Hopefully other MVEBU SoC's will follow here. Support for some SoC's has been removed in this version. This is: MV_MSYS: The code referred to by the MV_MSYS define is currently unused. And its not really planned to support this in mainline. So lets remove it to make the code clearer and increase the readability. MV88F68XX (A38x): The code referred to by the MV88F68XX define (A38x) is currently unused. And its partial and not sufficient for this device in this stage. So lets remove it to make the code clearer and increase the readability. MV88F66XX (ALP): The code referred to by the MV88F66XX define is currently unused. And its not really planned to support this in mainline. So lets remove it to make the code clearer and increase the readability. MV88F78X60_Z1: The code referred to by the MV88F78X60_Z1 define is currently unused. As the Z1 revision of the AXP is not supported in mainline anymore. So lets remove it to make the code clearer and increase the readability. Remove support for Z1 & A0 AXP revisions (steppings). The current stepping is B0 and this is the only one that is actively supported in this code version. Tested on AXP using a SPD DIMM setup on the Marvell DB-MV784MP-GP board and on a custom fixed DDR configuration board (maxbcm). Note: This code has undergone many hours of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. This might be some task to tackly later on. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
2015-01-19 10:33:40 +00:00
/*
* Copyright (C) Marvell International Ltd. and its affiliates
*/
#ifndef __AXP_VARS_H
#define __AXP_VARS_H
#include "ddr3_axp_config.h"
#include "ddr3_axp_mc_static.h"
#include "ddr3_axp_training_static.h"
MV_DRAM_MODES ddr_modes[MV_DDR3_MODES_NUMBER] = {
/* Conf name CPUFreq FabFreq Chip ID Chip/Board MC regs Training Values */
/* db board values: */
{"db_800-400", 0xA, 0x5, 0x0, A0, ddr3_A0_db_400, NULL},
{"db_1200-300", 0x2, 0xC, 0x0, A0, ddr3_A0_db_400, NULL},
{"db_1200-600", 0x2, 0x5, 0x0, A0, NULL, NULL},
{"db_1333-667", 0x3, 0x5, 0x0, A0, ddr3_A0_db_667, ddr3_db_rev2_667},
{"db_1600-800", 0xB, 0x5, 0x0, A0, ddr3_A0_db_667, ddr3_db_rev2_800},
{"amc_1333-667", 0x3, 0x5, 0x0, A0_AMC, ddr3_A0_AMC_667, NULL},
{"db_667-667", 0x9, 0x13, 0x0, Z1, ddr3_Z1_db_600, ddr3_db_667},
{"db_800-400", 0xA, 0x1, 0x0, Z1, ddr3_Z1_db_300, ddr3_db_400},
{"db_1066-533", 0x1, 0x1, 0x0, Z1, ddr3_Z1_db_300, ddr3_db_533},
{"db_1200-300", 0x2, 0xC, 0x0, Z1, ddr3_Z1_db_300, ddr3_db_667},
{"db_1200-600", 0x2, 0x5, 0x0, Z1, ddr3_Z1_db_600, NULL},
{"db_1333-333", 0x3, 0xC, 0x0, Z1, ddr3_Z1_db_300, ddr3_db_400},
{"db_1333-667", 0x3, 0x5, 0x0, Z1, ddr3_Z1_db_600, ddr3_db_667},
/* pcac board values (Z1 device): */
{"pcac_1200-600", 0x2, 0x5, 0x0, Z1_PCAC, ddr3_Z1_db_600,
ddr3_pcac_600},
/* rd board values (Z1 device): */
{"rd_667_0", 0x3, 0x5, 0x0, Z1_RD_SLED, ddr3_Z1_db_600, ddr3_rd_667_0},
{"rd_667_1", 0x3, 0x5, 0x1, Z1_RD_SLED, ddr3_Z1_db_600, ddr3_rd_667_1},
{"rd_667_2", 0x3, 0x5, 0x2, Z1_RD_SLED, ddr3_Z1_db_600, ddr3_rd_667_2},
{"rd_667_3", 0x3, 0x5, 0x3, Z1_RD_SLED, ddr3_Z1_db_600, ddr3_rd_667_3}
};
/* ODT settings - if needed update the following tables: (ODT_OPT - represents the CS configuration bitmap) */
u16 odt_static[ODT_OPT][MAX_CS] = { /* NearEnd/FarEnd */
{0, 0, 0, 0}, /* 0000 0/0 - Not supported */
{ODT40, 0, 0, 0}, /* 0001 0/1 */
{0, 0, 0, 0}, /* 0010 0/0 - Not supported */
{ODT40, ODT40, 0, 0}, /* 0011 0/2 */
{0, 0, ODT40, 0}, /* 0100 1/0 */
{ODT30, 0, ODT30, 0}, /* 0101 1/1 */
{0, 0, 0, 0}, /* 0110 0/0 - Not supported */
{ODT120, ODT20, ODT20, 0}, /* 0111 1/2 */
{0, 0, 0, 0}, /* 1000 0/0 - Not supported */
{0, 0, 0, 0}, /* 1001 0/0 - Not supported */
{0, 0, 0, 0}, /* 1010 0/0 - Not supported */
{0, 0, 0, 0}, /* 1011 0/0 - Not supported */
{0, 0, ODT40, 0}, /* 1100 2/0 */
{ODT20, 0, ODT120, ODT20}, /* 1101 2/1 */
{0, 0, 0, 0}, /* 1110 0/0 - Not supported */
{ODT120, ODT30, ODT120, ODT30} /* 1111 2/2 */
};
u16 odt_dynamic[ODT_OPT][MAX_CS] = { /* NearEnd/FarEnd */
{0, 0, 0, 0}, /* 0000 0/0 */
{0, 0, 0, 0}, /* 0001 0/1 */
{0, 0, 0, 0}, /* 0010 0/0 - Not supported */
{0, 0, 0, 0}, /* 0011 0/2 */
{0, 0, 0, 0}, /* 0100 1/0 */
{ODT120D, 0, ODT120D, 0}, /* 0101 1/1 */
{0, 0, 0, 0}, /* 0110 0/0 - Not supported */
{0, 0, ODT120D, 0}, /* 0111 1/2 */
{0, 0, 0, 0}, /* 1000 0/0 - Not supported */
{0, 0, 0, 0}, /* 1001 0/0 - Not supported */
{0, 0, 0, 0}, /* 1010 0/0 - Not supported */
{0, 0, 0, 0}, /* 1011 0/0 - Not supported */
{0, 0, 0, 0}, /* 1100 2/0 */
{ODT120D, 0, 0, 0}, /* 1101 2/1 */
{0, 0, 0, 0}, /* 1110 0/0 - Not supported */
{0, 0, 0, 0} /* 1111 2/2 */
};
u32 odt_config[ODT_OPT] = {
0, 0x00010000, 0, 0x00030000, 0x04000000, 0x05050104, 0, 0x07430340, 0,
0, 0, 0,
0x30000, 0x1C0D100C, 0, 0x3CC330C0
};
/*
* User can manually set SPD values (in case SPD is not available on
* DIMM/System).
* SPD Values can simplify calculating the DUNIT registers values
*/
u8 spd_data[SPD_SIZE] = {
/* AXP DB Board DIMM SPD Values - manually set */
0x92, 0x10, 0x0B, 0x2, 0x3, 0x19, 0x0, 0x9, 0x09, 0x52, 0x1, 0x8, 0x0C,
0x0, 0x7E, 0x0, 0x69, 0x78,
0x69, 0x30, 0x69, 0x11, 0x20, 0x89, 0x0, 0x5, 0x3C, 0x3C, 0x0, 0xF0,
0x82, 0x5, 0x80, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0, 0x0F, 0x1, 0x3, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
0x0, 0x80, 0x2C, 0x1, 0x10, 0x23, 0x35, 0x28, 0xEB, 0xCA, 0x19, 0x8F
};
/*
* Controller Specific configurations Starts Here - DO NOT MODIFY
*/
/* Frequency - values are 1/HCLK in ps */
u32 cpu_fab_clk_to_hclk[FAB_OPT][CLK_CPU] =
/* CPU Frequency:
1000 1066 1200 1333 1500 1666 1800 2000 600 667 800 1600 Fabric */
{
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
{0, 0, 0, 0, 0, 0, 0, 0, 0, 3000, 2500, 0},
{0, 0, 0, 0, 0, 0, 0, 0, 0, 4500, 3750, 0},
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
{0, 0, 2500, 0, 0, 0, 0, 0, 0, 0, 0, 0},
{4000, 3750, 3333, 3000, 2666, 2400, 0, 0, 0, 0, 5000, 2500},
{0, 0, 0, 0, 0, 0, 0, 0, 0, 3000, 0, 0},
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
{2500, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
{0, 0, 5000, 0, 4000, 0, 0, 0, 0, 0, 0, 3750},
{5000, 0, 0, 3750, 3333, 0, 0, 0, 0, 0, 0, 3125},
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
{0, 0, 3330, 3000, 0, 0, 0, 0, 0, 0, 0, 2500},
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 3750},
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
{0, 0, 0, 0, 0, 0, 0, 0, 0, 3000, 2500, 0},
{3000, 0, 2500, 0, 0, 0, 0, 0, 0, 0, 3750, 0}
};
u32 cpu_ddr_ratios[FAB_OPT][CLK_CPU] =
/* CPU Frequency:
1000 1066 1200 1333 1500 1666 1800 2000 600 667 800 1600 Fabric */
{
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
{0, 0, 0, 0, 0, 0, 0, 0, 0, DDR_333, DDR_400, 0},
{0, 0, 0, 0, 0, 0, 0, 0, 0, DDR_444, DDR_533, 0},
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
{0, 0, DDR_400, 0, 0, 0, 0, 0, 0, 0, 0, 0},
{DDR_500, DDR_533, DDR_600, DDR_666, DDR_750, DDR_833, 0, 0, 0, 0,
DDR_400, DDR_800},
{0, 0, 0, 0, 0, 0, 0, 0, 0, DDR_333, 0, 0},
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
{DDR_400, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
{0, 0, DDR_400, 0, DDR_500, 0, 0, 0, 0, 0, 0, DDR_533},
{DDR_400, 0, 0, DDR_533, DDR_600, 0, 0, 0, 0, 0, 0, DDR_640},
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
{0, 0, DDR_300, DDR_333, 0, 0, 0, 0, 0, 0, 0, DDR_400},
{0, 0, 0, 0, 0, 0, DDR_600, DDR_666, 0, 0, 0, DDR_533},
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
{0, 0, 0, 0, 0, 0, 0, 0, 0, DDR_666, DDR_800, 0},
{DDR_666, 0, DDR_800, 0, 0, 0, 0, 0, 0, 0, DDR_533, 0}
};
u8 div_ratio1to1[CLK_VCO][CLK_DDR] =
/* DDR Frequency:
100 300 360 400 444 500 533 600 666 750 800 833 */
{ {0xA, 3, 0, 3, 0, 2, 0, 0, 0, 0, 0, 0}, /* 1:1 CLK_CPU_1000 */
{0xB, 3, 0, 3, 0, 0, 2, 0, 0, 0, 0, 0}, /* 1:1 CLK_CPU_1066 */
{0xC, 4, 0, 3, 0, 0, 0, 2, 0, 0, 0, 0}, /* 1:1 CLK_CPU_1200 */
{0xD, 4, 0, 4, 0, 0, 0, 0, 2, 0, 0, 0}, /* 1:1 CLK_CPU_1333 */
{0xF, 5, 0, 4, 0, 3, 0, 0, 0, 0, 0, 0}, /* 1:1 CLK_CPU_1500 */
{0x11, 5, 0, 4, 0, 0, 0, 0, 0, 0, 0, 0}, /* 1:1 CLK_CPU_1666 */
{0x12, 6, 5, 4, 0, 0, 0, 3, 0, 0, 0, 0}, /* 1:1 CLK_CPU_1800 */
{0x14, 7, 0, 5, 0, 4, 0, 0, 3, 0, 0, 0}, /* 1:1 CLK_CPU_2000 */
{0x6, 2, 0, 2, 0, 0, 0, 0, 0, 0, 0, 0}, /* 1:1 CLK_CPU_600 */
{0x6, 2, 0, 2, 0, 0, 0, 0, 0, 0, 0, 0}, /* 1:1 CLK_CPU_667 */
{0x8, 2, 0, 2, 0, 0, 0, 0, 0, 0, 0, 0}, /* 1:1 CLK_CPU_800 */
{0x10, 5, 0, 4, 0, 0, 0, 0, 0, 0, 0, 0}, /* 1:1 CLK_CPU_1600 */
{0x14, 0, 0, 5, 0, 0, 0, 0, 0, 0, 0, 0}, /* 1:1 CLK_CPU_1000 VCO_2000 */
{0x15, 0, 0, 6, 0, 0, 0, 0, 0, 0, 0, 0}, /* 1:1 CLK_CPU_1066 VCO_2133 */
{0x18, 0, 0, 6, 0, 0, 0, 0, 0, 0, 0, 0}, /* 1:1 CLK_CPU_1200 VCO_2400 */
{0x1A, 0, 0, 7, 0, 0, 0, 0, 0, 0, 0, 0}, /* 1:1 CLK_CPU_1333 VCO_2666 */
{0x1E, 0, 0, 8, 0, 0, 0, 0, 0, 0, 0, 0}, /* 1:1 CLK_CPU_1500 VCO_3000 */
{0x21, 0, 0, 9, 0, 0, 0, 0, 0, 0, 0, 0}, /* 1:1 CLK_CPU_1666 VCO_3333 */
{0x24, 0, 0, 9, 0, 0, 0, 0, 0, 0, 0, 0}, /* 1:1 CLK_CPU_1800 VCO_3600 */
{0x28, 0, 0, 10, 0, 0, 0, 0, 0, 0, 0, 0}, /* 1:1 CLK_CPU_2000 VCO_4000 */
{0xC, 0, 0, 3, 0, 0, 0, 0, 0, 0, 0, 0}, /* 1:1 CLK_CPU_600 VCO_1200 */
{0xD, 0, 0, 4, 0, 0, 0, 0, 0, 0, 0, 0}, /* 1:1 CLK_CPU_667 VCO_1333 */
{0x10, 0, 0, 4, 0, 0, 0, 0, 0, 0, 0, 0}, /* 1:1 CLK_CPU_800 VCO_1600 */
{0x20, 10, 0, 8, 0, 0, 0, 0, 0, 0, 0, 0} /* 1:1 CLK_CPU_1600 VCO_3200 */
};
u8 div_ratio2to1[CLK_VCO][CLK_DDR] =
/* DDR Frequency:
100 300 360 400 444 500 533 600 666 750 800 833 */
{ {0, 0, 0, 0, 0, 2, 0, 0, 3, 0, 0, 0}, /* 2:1 CLK_CPU_1000 */
{0, 0, 0, 0, 0, 0, 2, 0, 0, 0, 0, 0}, /* 2:1 CLK_CPU_1066 */
{0, 0, 0, 3, 5, 0, 0, 2, 0, 0, 3, 3}, /* 2:1 CLK_CPU_1200 */
{0, 0, 0, 0, 0, 0, 5, 0, 2, 0, 3, 0}, /* 2:1 CLK_CPU_1333 */
{0, 0, 0, 0, 0, 3, 0, 5, 0, 2, 0, 0}, /* 2:1 CLK_CPU_1500 */
{0, 0, 0, 0, 0, 0, 0, 0, 5, 0, 0, 2}, /* 2:1 CLK_CPU_1666 */
{0, 0, 0, 0, 0, 0, 0, 3, 0, 5, 0, 0}, /* 2:1 CLK_CPU_1800 */
{0, 0, 0, 0, 0, 0, 0, 0, 3, 0, 0, 5}, /* 2:1 CLK_CPU_2000 */
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* 2:1 CLK_CPU_600 */
{0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0}, /* 2:1 CLK_CPU_667 */
{0, 0, 0, 2, 0, 0, 0, 0, 0, 0, 1, 0}, /* 2:1 CLK_CPU_800 */
{0, 0, 0, 0, 0, 0, 3, 0, 0, 0, 2, 0}, /* 2:1 CLK_CPU_1600 */
{0, 0, 0, 5, 0, 0, 0, 0, 3, 0, 0, 0}, /* 2:1 CLK_CPU_1000 VCO_2000 */
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* 2:1 CLK_CPU_1066 VCO_2133 */
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 3, 0}, /* 2:1 CLK_CPU_1200 VCO_2400 */
{0, 0, 0, 0, 0, 0, 5, 0, 0, 0, 0, 0}, /* 2:1 CLK_CPU_1333 VCO_2666 */
{0, 0, 0, 0, 0, 0, 0, 5, 0, 0, 0, 0}, /* 2:1 CLK_CPU_1500 VCO_3000 */
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* 2:1 CLK_CPU_1666 VCO_3333 */
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* 2:1 CLK_CPU_1800 VCO_3600 */
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* 2:1 CLK_CPU_2000 VCO_4000 */
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* 2:1 CLK_CPU_600 VCO_1200 */
{0, 0, 0, 0, 3, 0, 0, 0, 0, 0, 0, 0}, /* 2:1 CLK_CPU_667 VCO_1333 */
{0, 0, 0, 0, 0, 0, 3, 0, 0, 0, 0, 0}, /* 2:1 CLK_CPU_800 VCO_1600 */
{0, 0, 0, 0, 0, 0, 0, 5, 5, 0, 0, 0} /* 2:1 CLK_CPU_1600 VCO_3200 */
};
#endif /* __AXP_VARS_H */