u-boot/board/renesas/sh7753evb/sh7753evb.c

325 lines
8 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2012 Renesas Solutions Corp.
*/
#include <common.h>
#include <environment.h>
#include <malloc.h>
#include <asm/processor.h>
#include <asm/io.h>
#include <asm/mmc.h>
#include <spi.h>
#include <spi_flash.h>
int checkboard(void)
{
puts("BOARD: SH7753 EVB\n");
return 0;
}
static void init_gpio(void)
{
struct gpio_regs *gpio = GPIO_BASE;
struct sermux_regs *sermux = SERMUX_BASE;
/* GPIO */
writew(0x0000, &gpio->pacr); /* GETHER */
writew(0x0001, &gpio->pbcr); /* INTC */
writew(0x0000, &gpio->pccr); /* PWMU, INTC */
writew(0x0000, &gpio->pdcr); /* SPI0 */
writew(0xeaff, &gpio->pecr); /* GPIO */
writew(0x0000, &gpio->pfcr); /* WDT */
writew(0x0004, &gpio->pgcr); /* SPI0, GETHER MDIO gate(PTG1) */
writew(0x0000, &gpio->phcr); /* SPI1 */
writew(0x0000, &gpio->picr); /* SDHI */
writew(0x0000, &gpio->pjcr); /* SCIF4 */
writew(0x0003, &gpio->pkcr); /* SerMux */
writew(0x0000, &gpio->plcr); /* SerMux */
writew(0x0000, &gpio->pmcr); /* RIIC */
writew(0x0000, &gpio->pncr); /* USB, SGPIO */
writew(0x0000, &gpio->pocr); /* SGPIO */
writew(0xd555, &gpio->pqcr); /* GPIO */
writew(0x0000, &gpio->prcr); /* RIIC */
writew(0x0000, &gpio->pscr); /* RIIC */
writew(0x0000, &gpio->ptcr); /* STATUS */
writeb(0x00, &gpio->pudr);
writew(0x5555, &gpio->pucr); /* Debug LED */
writew(0x0000, &gpio->pvcr); /* RSPI */
writew(0x0000, &gpio->pwcr); /* EVC */
writew(0x0000, &gpio->pxcr); /* LBSC */
writew(0x0000, &gpio->pycr); /* LBSC */
writew(0x0000, &gpio->pzcr); /* eMMC */
writew(0xfe00, &gpio->psel0);
writew(0x0000, &gpio->psel1);
writew(0x3000, &gpio->psel2);
writew(0xff00, &gpio->psel3);
writew(0x771f, &gpio->psel4);
writew(0x0ffc, &gpio->psel5);
writew(0x00ff, &gpio->psel6);
writew(0xfc00, &gpio->psel7);
writeb(0x10, &sermux->smr0); /* SMR0: SerMux mode 0 */
}
static void init_usb_phy(void)
{
struct usb_common_regs *common0 = USB0_COMMON_BASE;
struct usb_common_regs *common1 = USB1_COMMON_BASE;
struct usb0_phy_regs *phy = USB0_PHY_BASE;
struct usb1_port_regs *port = USB1_PORT_BASE;
struct usb1_alignment_regs *align = USB1_ALIGNMENT_BASE;
writew(0x0100, &phy->reset); /* set reset */
/* port0 = USB0, port1 = USB1 */
writew(0x0002, &phy->portsel);
writel(0x0001, &port->port1sel); /* port1 = Host */
writew(0x0111, &phy->reset); /* clear reset */
writew(0x4000, &common0->suspmode);
writew(0x4000, &common1->suspmode);
#if defined(__LITTLE_ENDIAN)
writel(0x00000000, &align->ehcidatac);
writel(0x00000000, &align->ohcidatac);
#endif
}
static void init_gether_mdio(void)
{
struct gpio_regs *gpio = GPIO_BASE;
writew(readw(&gpio->pgcr) | 0x0004, &gpio->pgcr);
writeb(readb(&gpio->pgdr) | 0x02, &gpio->pgdr); /* Use ET0-MDIO */
}
static void set_mac_to_sh_giga_eth_register(int channel, char *mac_string)
{
struct ether_mac_regs *ether;
unsigned char mac[6];
unsigned long val;
eth_parse_enetaddr(mac_string, mac);
if (!channel)
ether = GETHER0_MAC_BASE;
else
ether = GETHER1_MAC_BASE;
val = (mac[0] << 24) | (mac[1] << 16) | (mac[2] << 8) | mac[3];
writel(val, &ether->mahr);
val = (mac[4] << 8) | mac[5];
writel(val, &ether->malr);
}
#if defined(CONFIG_SH_32BIT)
/*****************************************************************
* This PMB must be set on this timing. The lowlevel_init is run on
* Area 0(phys 0x00000000), so we have to map it.
*
* The new PMB table is following:
* ent virt phys v sz c wt
* 0 0xa0000000 0x40000000 1 128M 0 1
* 1 0xa8000000 0x48000000 1 128M 0 1
* 2 0xb0000000 0x50000000 1 128M 0 1
* 3 0xb8000000 0x58000000 1 128M 0 1
* 4 0x80000000 0x40000000 1 128M 1 1
* 5 0x88000000 0x48000000 1 128M 1 1
* 6 0x90000000 0x50000000 1 128M 1 1
* 7 0x98000000 0x58000000 1 128M 1 1
*/
static void set_pmb_on_board_init(void)
{
struct mmu_regs *mmu = MMU_BASE;
/* clear ITLB */
writel(0x00000004, &mmu->mmucr);
/* delete PMB for SPIBOOT */
writel(0, PMB_ADDR_BASE(0));
writel(0, PMB_DATA_BASE(0));
/* add PMB for SDRAM(0x40000000 - 0x47ffffff) */
/* ppn ub v s1 s0 c wt */
writel(mk_pmb_addr_val(0xa0), PMB_ADDR_BASE(0));
writel(mk_pmb_data_val(0x40, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(0));
writel(mk_pmb_addr_val(0xb0), PMB_ADDR_BASE(2));
writel(mk_pmb_data_val(0x50, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(2));
writel(mk_pmb_addr_val(0xb8), PMB_ADDR_BASE(3));
writel(mk_pmb_data_val(0x58, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(3));
writel(mk_pmb_addr_val(0x80), PMB_ADDR_BASE(4));
writel(mk_pmb_data_val(0x40, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(4));
writel(mk_pmb_addr_val(0x90), PMB_ADDR_BASE(6));
writel(mk_pmb_data_val(0x50, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(6));
writel(mk_pmb_addr_val(0x98), PMB_ADDR_BASE(7));
writel(mk_pmb_data_val(0x58, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(7));
}
#endif
int board_init(void)
{
struct gether_control_regs *gether = GETHER_CONTROL_BASE;
init_gpio();
#if defined(CONFIG_SH_32BIT)
set_pmb_on_board_init();
#endif
/* Sets TXnDLY to B'010 */
writel(0x00000202, &gether->gbecont);
init_usb_phy();
init_gether_mdio();
return 0;
}
int board_mmc_init(bd_t *bis)
{
struct gpio_regs *gpio = GPIO_BASE;
writew(readw(&gpio->pgcr) | 0x0040, &gpio->pgcr);
writeb(readb(&gpio->pgdr) & ~0x08, &gpio->pgdr); /* Reset */
udelay(1);
writeb(readb(&gpio->pgdr) | 0x08, &gpio->pgdr); /* Release reset */
udelay(200);
return mmcif_mmc_init();
}
static int get_sh_eth_mac_raw(unsigned char *buf, int size)
{
#ifdef CONFIG_DEPRECATED
struct spi_flash *spi;
int ret;
spi = spi_flash_probe(0, 0, 1000000, SPI_MODE_3);
if (spi == NULL) {
printf("%s: spi_flash probe failed.\n", __func__);
return 1;
}
ret = spi_flash_read(spi, SH7753EVB_ETHERNET_MAC_BASE, size, buf);
if (ret) {
printf("%s: spi_flash read failed.\n", __func__);
spi_flash_free(spi);
return 1;
}
spi_flash_free(spi);
#endif
return 0;
}
static int get_sh_eth_mac(int channel, char *mac_string, unsigned char *buf)
{
memcpy(mac_string, &buf[channel * (SH7753EVB_ETHERNET_MAC_SIZE + 1)],
SH7753EVB_ETHERNET_MAC_SIZE);
mac_string[SH7753EVB_ETHERNET_MAC_SIZE] = 0x00; /* terminate */
return 0;
}
static void init_ethernet_mac(void)
{
char mac_string[64];
char env_string[64];
int i;
unsigned char *buf;
buf = malloc(256);
if (!buf) {
printf("%s: malloc failed.\n", __func__);
return;
}
get_sh_eth_mac_raw(buf, 256);
/* Gigabit Ethernet */
for (i = 0; i < SH7753EVB_ETHERNET_NUM_CH; i++) {
get_sh_eth_mac(i, mac_string, buf);
if (i == 0)
env_set("ethaddr", mac_string);
else {
sprintf(env_string, "eth%daddr", i);
env_set(env_string, mac_string);
}
set_mac_to_sh_giga_eth_register(i, mac_string);
}
free(buf);
}
int board_late_init(void)
{
init_ethernet_mac();
return 0;
}
#ifdef CONFIG_DEPRECATED
int do_write_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
int i, ret;
char mac_string[256];
struct spi_flash *spi;
unsigned char *buf;
if (argc != 3) {
buf = malloc(256);
if (!buf) {
printf("%s: malloc failed.\n", __func__);
return 1;
}
get_sh_eth_mac_raw(buf, 256);
/* print current MAC address */
for (i = 0; i < SH7753EVB_ETHERNET_NUM_CH; i++) {
get_sh_eth_mac(i, mac_string, buf);
printf("GETHERC ch%d = %s\n", i, mac_string);
}
free(buf);
return 0;
}
/* new setting */
memset(mac_string, 0xff, sizeof(mac_string));
sprintf(mac_string, "%s\t%s",
argv[1], argv[2]);
/* write MAC data to SPI rom */
spi = spi_flash_probe(0, 0, 1000000, SPI_MODE_3);
if (!spi) {
printf("%s: spi_flash probe failed.\n", __func__);
return 1;
}
ret = spi_flash_erase(spi, SH7753EVB_ETHERNET_MAC_BASE_SPI,
SH7753EVB_SPI_SECTOR_SIZE);
if (ret) {
printf("%s: spi_flash erase failed.\n", __func__);
return 1;
}
ret = spi_flash_write(spi, SH7753EVB_ETHERNET_MAC_BASE_SPI,
sizeof(mac_string), mac_string);
if (ret) {
printf("%s: spi_flash write failed.\n", __func__);
spi_flash_free(spi);
return 1;
}
spi_flash_free(spi);
puts("The writing of the MAC address to SPI ROM was completed.\n");
return 0;
}
U_BOOT_CMD(
write_mac, 3, 1, do_write_mac,
"write MAC address for GETHERC",
"[GETHERC ch0] [GETHERC ch1]\n"
);
#endif