u-boot/board/freescale/imx8mn_evk/MAINTAINERS

i.MX8MM EVK BOARD
M:	Peng Fan <peng.fan@nxp.com>
S:	Maintained
F:	board/freescale/imx8mn_evk/
F:	include/configs/imx8mn_evk.h
F:	configs/imx8mn_ddr4_evk_defconfig
imx: add i.MX8MN DDR4 board support Support pinctrl/clk/sdhc, include ddr4 timing data. Log: U-Boot SPL 2019.10-rc3-00356-g497c500423-dirty (Sep 16 2019 - 10:54:58 +0800) Normal Boot Trying to boot from BOOTROM image offset 0x8000, pagesize 0x200, ivt offset 0x0 U-Boot 2019.10-rc3-00356-g497c500423-dirty (Sep 16 2019 - 10:54:58 +0800) CPU: Freescale i.MX8MNano rev1.0 at 24 MHz Reset cause: POR Model: NXP i.MX8MNano DDR4 EVK board DRAM: 2 GiB MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <peng.fan@nxp.com> 2019-09-16 03:09:55 +00:00			`i.MX8MM EVK BOARD`
			`M: Peng Fan <peng.fan@nxp.com>`
			`S: Maintained`
			`F: board/freescale/imx8mn_evk/`
			`F: include/configs/imx8mn_evk.h`
			`F: configs/imx8mn_ddr4_evk_defconfig`