u-boot/arch/arm/dts/imx6qdl-aristainetos2c.dtsi

// SPDX-License-Identifier: (GPL-2.0)
/*
 * support for the imx6 based aristainetos2c board
 *
 * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
 * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
 *
 */
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clock/imx6qdl-clock.h>

#include "imx6qdl-aristainetos2-common.dtsi"

/ {
	leds {
		compatible = "gpio-leds";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_gpio>;

		LED_blue {
			label = "led_blue";
			gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
		};

		LED_green {
			label = "led_green";
			gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
		};

		LED_red {
			label = "led_red";
			gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;
		};

		LED_yellow {
			label = "led_yellow";
			gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
		};

		LED_ena {
			label = "led_ena";
			gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
		};
	};
};

&ecspi1 {
	fsl,spi-num-chipselects = <3>;
	cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH
		    &gpio4 10 GPIO_ACTIVE_HIGH
		    &gpio4 11 GPIO_ACTIVE_HIGH>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_ecspi1>;
	status = "okay";
	pinctrl-assert-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
	pinctrl-assert-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;

	flash: m25p80@0 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "micron,n25q128a11", "jedec,spi-nor";
		spi-max-frequency = <20000000>;
		reg = <0>;
	};
};

&ecspi4 {
	fsl,spi-num-chipselects = <2>;
	cs-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH &gpio5 2 GPIO_ACTIVE_HIGH>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_ecspi4>;
	status = "okay";
};

&i2c1 {
	tpm@20 {
		compatible = "infineon,slb9645tt";
		reg = <0x20>;
	};
};

&can1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_flexcan1>;
	status = "okay";
};

&can2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_flexcan2>;
	status = "okay";
};

&usdhc1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usdhc1>;
	cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
	wp-gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>;
	no-1-8-v;
	status = "okay";
};

&usdhc2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usdhc2>;
	bus-width = <8>;
	no-1-8-v;
	non-removable;
	status = "okay";
};

&iomuxc {
	pinctrl_ecspi1: ecspi1grp {
		fsl,pins = <
			MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
			/* SS0# */
			MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x100b1
			/* SS1# */
			MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x100b1
			/* SS2# */
			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x100b1
			/* WP pin NOR Flash */
			MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x4001b0b0
			/* Flash nReset */
			MX6QDL_PAD_EIM_EB0__GPIO2_IO28  0x4001b0b0
		>;
	};

	pinctrl_ecspi4: ecspi4grp {
		fsl,pins = <
			MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
			MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
			MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
			MX6QDL_PAD_EIM_D29__GPIO3_IO29  0x100b1 /* SS0# */
			MX6QDL_PAD_EIM_A25__GPIO5_IO02  0x100b1 /* SS1# */
		>;
	};

	pinctrl_gpio: gpiogrp {
		fsl,pins = <
			/* led enable */
			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x4001b0b0
			/* LCD power enable */
			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x4001b0b0
			/* led yellow */
			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x4001b0b0
			/* led red */
			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0x4001b0b0
			/* led green */
			MX6QDL_PAD_EIM_A24__GPIO5_IO04		0x4001b0b0
			/* led blue */
			MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x4001b0b0
			/* Profibus IRQ */
			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
			/* FPGA IRQ currently unused*/
			MX6QDL_PAD_SD3_DAT6__GPIO6_IO18		0x1b0b0
			/* Display reset because of clock failure */
			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11		0x4001b0b0
			/* spi bus #2 SS driver enable */
			MX6QDL_PAD_EIM_A23__GPIO6_IO06		0x4001b0b0
			/* RST_LOC# PHY reset input (has pull-down!)*/
			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x4001b0b0
			/* Touchscreen IRQ */
			MX6QDL_PAD_SD4_DAT1__GPIO2_IO09		0x1b0b0
			/* PCIe reset */
			MX6QDL_PAD_EIM_A22__GPIO2_IO16		0x4001b0b0
			/* make sure pin is GPIO and not ENET_REF_CLK */
			MX6QDL_PAD_GPIO_16__GPIO7_IO11		0x4001a0b0
			/* TPM PP */
			MX6QDL_PAD_EIM_A21__GPIO2_IO17		0x4001b0b0
			/* TPM Reset */
			MX6QDL_PAD_EIM_A20__GPIO2_IO18		0x4001b0b0
		>;
	};

	pinctrl_flexcan1: flexcan1grp {
		fsl,pins = <
			MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x1b0b0
			MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x1b0b0
		>;
	};

	pinctrl_flexcan2: flexcan2grp {
		fsl,pins = <
			MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x1b0b0
			MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x1b0b0
		>;
	};

	pinctrl_usbotg: usbotggrp {
		fsl,pins = <
			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID  0x17059
			MX6QDL_PAD_KEY_COL4__USB_OTG_OC    0x1b0b0
		>;
	};

	pinctrl_usdhc1: usdhc1grp {
		fsl,pins = <
			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
			/* SD1 card detect input */
			MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x1b0b0
			/* SD1 write protect input */
			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20		0x1b0b0
		>;
	};

	pinctrl_usdhc2: usdhc2grp {
		fsl,pins = <
			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
			MX6QDL_PAD_NANDF_D4__SD2_DATA4		0x17059
			MX6QDL_PAD_NANDF_D5__SD2_DATA5		0x17059
			MX6QDL_PAD_NANDF_D6__SD2_DATA6		0x17059
			MX6QDL_PAD_NANDF_D7__SD2_DATA7		0x17059
		>;
	};
};