u-boot/arch/arm/dts/imx6q-bx50v3.dtsi

410 lines
9 KiB
Text
Raw Normal View History

/*
* Copyright 2015 Timesys Corporation.
* Copyright 2015 General Electric Company
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "imx6q-ba16.dtsi"
/ {
mclk: clock-mclk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <22000000>;
};
gpio-poweroff {
compatible = "gpio-poweroff";
gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
status = "okay";
};
reg_wl18xx_vmmc: regulator-wl18xx {
compatible = "regulator-fixed";
regulator-name = "vwl1807";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&pca9539 3 GPIO_ACTIVE_HIGH>;
startup-delay-us = <70000>;
enable-active-high;
};
reg_wlan: regulator-wlan {
compatible = "regulator-fixed";
regulator-name = "3P3V_wlan";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio6 14 GPIO_ACTIVE_HIGH>;
};
sound {
compatible = "fsl,imx6q-ba16-sgtl5000",
"fsl,imx-audio-sgtl5000";
model = "imx6q-ba16-sgtl5000";
ssi-controller = <&ssi1>;
audio-codec = <&sgtl5000>;
audio-routing =
"MIC_IN", "Mic Jack",
"Mic Jack", "Mic Bias",
"LINE_IN", "Line In Jack",
"Headphone Jack", "HP_OUT";
mux-int-port = <1>;
mux-ext-port = <4>;
};
aliases {
mdio-gpio0 = &mdio0;
};
mdio0: mdio-gpio {
compatible = "virtual,mdio-gpio";
gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>, /* mdc */
<&gpio2 7 GPIO_ACTIVE_HIGH>; /* mdio */
#address-cells = <1>;
#size-cells = <0>;
switch: switch@0 {
compatible = "marvell,mv88e6085"; /* 88e6240*/
reg = <0>;
interrupt-parent = <&gpio2>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <2>;
switch_ports: ports {
#address-cells = <1>;
#size-cells = <0>;
};
mdio {
#address-cells = <1>;
#size-cells = <0>;
switchphy0: switchphy@0 {
reg = <0>;
interrupt-parent = <&switch>;
interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
};
switchphy1: switchphy@1 {
reg = <1>;
interrupt-parent = <&switch>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
};
switchphy2: switchphy@2 {
reg = <2>;
interrupt-parent = <&switch>;
interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
};
switchphy3: switchphy@3 {
reg = <3>;
interrupt-parent = <&switch>;
interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
};
switchphy4: switchphy@4 {
reg = <4>;
interrupt-parent = <&switch>;
interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
};
};
};
};
};
&ecspi5 {
cs-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi5>;
status = "okay";
m25_eeprom: flash@0 {
compatible = "atmel,at25";
spi-max-frequency = <10000000>;
size = <0x8000>;
pagesize = <64>;
reg = <0>;
address-width = <16>;
};
};
&i2c1 {
pinctrl-names = "default", "gpio";
pinctrl-1 = <&pinctrl_i2c1_gpio>;
sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
pca9547: mux@70 {
compatible = "nxp,pca9547";
reg = <0x70>;
#address-cells = <1>;
#size-cells = <0>;
mux1_i2c1: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0>;
ads7830: ads7830@48 {
compatible = "ti,ads7830";
reg = <0x48>;
};
mma8453: mma8453@1c {
compatible = "fsl,mma8453";
reg = <0x1c>;
};
};
mux1_i2c2: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x1>;
eeprom: eeprom@50 {
compatible = "atmel,24c08";
reg = <0x50>;
};
mpl3115: mpl3115@60 {
compatible = "fsl,mpl3115";
reg = <0x60>;
};
};
mux1_i2c3: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x2>;
};
mux1_i2c4: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x3>;
sgtl5000: codec@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&mclk>;
VDDA-supply = <&reg_1p8v>;
VDDIO-supply = <&reg_3p3v>;
};
};
mux1_i2c5: i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x4>;
pca9539: pca9539@74 {
compatible = "nxp,pca9539";
reg = <0x74>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
interrupt-parent = <&gpio2>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
P12-hog {
gpio-hog;
gpios = <10 0>;
output-low;
line-name = "PCA9539-P12";
};
P13-hog {
gpio-hog;
gpios = <11 0>;
output-low;
line-name = "PCA9539-P13";
};
P14-hog {
gpio-hog;
gpios = <12 0>;
output-low;
line-name = "PCA9539-P14";
};
P15-hog {
gpio-hog;
gpios = <13 0>;
output-low;
line-name = "PCA9539-P15";
};
P16-hog {
gpio-hog;
gpios = <14 0>;
output-low;
line-name = "PCA9539-P16";
};
P17-hog {
gpio-hog;
gpios = <15 0>;
output-low;
line-name = "PCA9539-P17";
};
};
};
mux1_i2c6: i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x5>;
};
mux1_i2c7: i2c@6 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x6>;
};
mux1_i2c8: i2c@7 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x7>;
};
};
};
&i2c2 {
pinctrl-names = "default", "gpio";
pinctrl-1 = <&pinctrl_i2c2_gpio>;
sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
};
&i2c3 {
pinctrl-names = "default", "gpio";
pinctrl-1 = <&pinctrl_i2c3_gpio>;
sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
};
&iomuxc {
pinctrl_i2c1_gpio: i2c1gpiogrp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x1b0b0
MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x1b0b0
>;
};
pinctrl_i2c2_gpio: i2c2gpiogrp {
fsl,pins = <
MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x1b0b0
MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x1b0b0
>;
};
pinctrl_i2c3_gpio: i2c3gpiogrp {
fsl,pins = <
MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x1b0b0
MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b0
>;
};
};
&pmu {
secure-reg-access;
};
&usdhc2 {
status = "disabled";
};
&usdhc4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc4>;
bus-width = <4>;
vmmc-supply = <&reg_wl18xx_vmmc>;
no-1-8-v;
non-removable;
wakeup-source;
keep-power-in-suspend;
cap-power-off-card;
max-frequency = <25000000>;
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
wlcore: wlcore@2 {
compatible = "ti,wl1837";
reg = <2>;
interrupt-parent = <&gpio2>;
interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
tcxo-clock-frequency = <26000000>;
};
};
&pcie {
/* Synopsys, Inc. Device */
pci_root: root@0,0 {
compatible = "pci16c3,abcd";
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
};
};
&clks {
assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
<&clks IMX6QDL_CLK_LDB_DI1_SEL>,
<&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>,
<&clks IMX6QDL_CLK_IPU1_DI1_PRE_SEL>,
<&clks IMX6QDL_CLK_IPU2_DI0_PRE_SEL>,
<&clks IMX6QDL_CLK_IPU2_DI1_PRE_SEL>;
assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
<&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
<&clks IMX6QDL_CLK_PLL2_PFD0_352M>,
<&clks IMX6QDL_CLK_PLL2_PFD0_352M>,
<&clks IMX6QDL_CLK_PLL2_PFD0_352M>,
<&clks IMX6QDL_CLK_PLL2_PFD0_352M>;
};