u-boot/arch/arm/dts/rk3128.dtsi

// SPDX-License-Identifier: GPL-2.0+
/*
 * (C) Copyright 2017 Rockchip Electronics Co., Ltd
 */

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/clock/rk3128-cru.h>

/ {
	compatible = "rockchip,rk3128";
	rockchip,sram = <&sram>;
	interrupt-parent = <&gic>;
	#address-cells = <1>;
	#size-cells = <1>;

	aliases {
		gpio0 = &gpio0;
		gpio1 = &gpio1;
		gpio2 = &gpio2;
		gpio3 = &gpio3;
		i2c0 = &i2c0;
		i2c1 = &i2c1;
		i2c2 = &i2c2;
		i2c3 = &i2c3;
		spi0 = &spi0;
		serial0 = &uart0;
		serial1 = &uart1;
		serial2 = &uart2;
		mmc0 = &emmc;
		mmc1 = &sdmmc;
	};

	arm-pmu {
		compatible = "arm,cortex-a7-pmu";
		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
	};

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;
		enable-method = "rockchip,rk3128-smp";

		cpu0: cpu@0 {
			device_type = "cpu";
			compatible = "arm,cortex-a7";
			reg = <0x0>;
			operating-points = <
				/* KHz    uV */
				 816000 1000000
			>;
			#cooling-cells = <2>; /* min followed by max */
			clock-latency = <40000>;
			clocks = <&cru ARMCLK>;
		};

		cpu1: cpu@1 {
			device_type = "cpu";
			compatible = "arm,cortex-a7";
			reg = <0x1>;
		};

		cpu2: cpu@2 {
			device_type = "cpu";
			compatible = "arm,cortex-a7";
			reg = <0x2>;
		};

		cpu3: cpu@3 {
			device_type = "cpu";
			compatible = "arm,cortex-a7";
			reg = <0x3>;
		};
	};

	cpu_axi_bus: cpu_axi_bus {
		compatible = "rockchip,cpu_axi_bus";
		#address-cells = <1>;
		#size-cells = <1>;
		ranges;

		qos {
			#address-cells = <1>;
			#size-cells = <1>;
			ranges;

			crypto {
				reg = <0x10128080 0x20>;
			};

			core {
				reg = <0x1012a000 0x20>;
			};

			peri {
				reg = <0x1012c000 0x20>;
			};

			gpu {
				reg = <0x1012d000 0x20>;
			};

			vpu {
				reg = <0x1012e000 0x20>;
			};

			rga {
				reg = <0x1012f000 0x20>;
			};
			ebc {
				reg = <0x1012f080 0x20>;
			};

			iep {
				reg = <0x1012f100 0x20>;
			};

			lcdc {
				reg = <0x1012f180 0x20>;
				rockchip,priority = <3 3>;
			};

			vip {
				reg = <0x1012f200 0x20>;
				rockchip,priority = <3 3>;
			};
		};

		msch {
			#address-cells = <1>;
			#size-cells = <1>;
			ranges;

			msch@10128000 {
				reg = <0x10128000 0x20>;
				rockchip,read-latency = <0x3f>;
			};
		};
	};

	psci {
		compatible      = "arm,psci";
		method          = "smc";
		cpu_suspend     = <0x84000001>;
		cpu_off         = <0x84000002>;
		cpu_on          = <0x84000003>;
		migrate         = <0x84000005>;
	};

	amba {
		compatible = "arm,amba-bus";
		#address-cells = <1>;
		#size-cells = <1>;
		interrupt-parent = <&gic>;
		ranges;

		pdma: dma-controller@20078000 {
			compatible = "arm,pl330", "arm,primecell";
			reg = <0x20078000 0x4000>;
			arm,pl330-broken-no-flushp;//2
			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
			#dma-cells = <1>;
			clocks = <&cru ACLK_DMAC>;
			clock-names = "apb_pclk";
		};
	};

	xin24m: xin24m {
		compatible = "fixed-clock";
		clock-frequency = <24000000>;
		clock-output-names = "xin24m";
		#clock-cells = <0>;
	};

	xin12m: xin12m {
		compatible = "fixed-clock";
		clock-frequency = <12000000>;
		clock-output-names = "xin12m";
		#clock-cells = <0>;
	};

	timer {
		compatible = "arm,armv7-timer";
		arm,cpu-registers-not-fw-configured;
		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
		clock-frequency = <24000000>;
	};

	timer@20044000 {
		compatible = "arm,armv7-timer";
		reg = <0x20044000 0xb8>;
		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
		rockchip,broadcast = <1>;
	};

	watchdog: watchdog@2004c000 {
		compatible = "rockchip,rk3128-wdt", "snps,dw-wdt";
		reg = <0x2004c000 0x100>;
		clocks = <&cru PCLK_WDT>;
		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
		rockchip,irq = <1>;
		rockchip,timeout = <60>;
		rockchip,atboot = <1>;
		rockchip,debug = <0>;
	};

	reset: reset@20000110 {
		compatible = "rockchip,reset";
		reg = <0x20000110 0x24>;
		#reset-cells = <1>;
	};

	nandc: nand-controller@10500000 {
		compatible = "rockchip,rk3128-nfc", "rockchip,rk2928-nfc";
		reg = <0x10500000 0x4000>;
		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&nandc_ale &nandc_cle &nandc_wrn &nandc_rdn &nandc_rdy &nandc_cs0 &nandc_data>;
		clocks = <&cru HCLK_NANDC>, <&cru SCLK_NANDC>;
		clock-names = "ahb", "nfc";
	};

	cru: clock-controller@20000000 {
		compatible = "rockchip,rk3128-cru";
		reg = <0x20000000 0x1000>;
		clocks = <&xin24m>;
		clock-names = "xin24m";
		rockchip,grf = <&grf>;
		#clock-cells = <1>;
		#reset-cells = <1>;
		assigned-clocks = <&cru PLL_GPLL>;
		assigned-clock-rates = <594000000>;
	};

	uart0: serial@20060000 {
		compatible = "rockchip,rk3128-uart", "snps,dw-apb-uart";
		reg = <0x20060000 0x100>;
		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
		reg-shift = <2>;
		reg-io-width = <4>;
		clock-frequency = <24000000>;
		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
		clock-names = "baudclk", "apb_pclk";
		pinctrl-names = "default";
		pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
		dmas = <&pdma 2>, <&pdma 3>;
		#dma-cells = <2>;
	};

	uart1: serial@20064000 {
		compatible = "rockchip,rk3128-uart", "snps,dw-apb-uart";
		reg = <0x20064000 0x100>;
		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
		reg-shift = <2>;
		reg-io-width = <4>;
		clock-frequency = <24000000>;
		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
		clock-names = "baudclk", "apb_pclk";
		pinctrl-names = "default";
		pinctrl-0 = <&uart1_xfer>;
		dmas = <&pdma 4>, <&pdma 5>;
		#dma-cells = <2>;
	};

	uart2: serial@20068000 {
		compatible = "rockchip,rk3128-uart", "snps,dw-apb-uart";
		reg = <0x20068000 0x100>;
		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
		reg-shift = <2>;
		reg-io-width = <4>;
		clock-frequency = <24000000>;
		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
		clock-names = "baudclk", "apb_pclk";
		pinctrl-names = "default";
		pinctrl-0 = <&uart2_xfer>;
		dmas = <&pdma 6>, <&pdma 7>;
		#dma-cells = <2>;
	};

	saradc: saradc@2006c000 {
		compatible = "rockchip,saradc";
		reg = <0x2006c000 0x100>;
		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
		#io-channel-cells = <1>;
		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
		clock-names = "saradc", "apb_pclk";
		resets = <&cru SRST_SARADC>;
		reset-names = "saradc-apb";
		status = "disabled";
	};

	pwm0: pwm@20050000 {
		compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm";
		reg = <0x20050000 0x10>;
		#pwm-cells = <3>;
		pinctrl-names = "default";
		pinctrl-0 = <&pwm0_pin>;
		clocks = <&cru PCLK_PWM>;
	};

	pwm1: pwm@20050010 {
		compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm";
		reg = <0x20050010 0x10>;
		#pwm-cells = <3>;
		pinctrl-names = "default";
		pinctrl-0 = <&pwm1_pin>;
		clocks = <&cru PCLK_PWM>;
	};

	pwm2: pwm@20050020 {
		compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm";
		reg = <0x20050020 0x10>;
		#pwm-cells = <3>;
		pinctrl-names = "default";
		pinctrl-0 = <&pwm2_pin>;
		clocks = <&cru PCLK_PWM>;
	};

	pwm3: pwm@20050030 {
		compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm";
		reg = <0x20050030 0x10>;
		#pwm-cells = <3>;
		pinctrl-names = "default";
		pinctrl-0 = <&pwm3_pin>;
		clocks = <&cru PCLK_PWM>;
	};

	sram: sram@10080400 {
		compatible = "rockchip,rk3128-smp-sram", "mmio-sram";
		reg = <0x10080400 0x1C00>;
		map-exec;
		map-cacheable;
	};

	pmu: syscon@100a0000 {
		compatible = "rockchip,rk3128-pmu", "syscon", "simple-mfd";
		reg = <0x100a0000 0x1000>;
		#address-cells = <1>;
		#size-cells = <1>;
	};

	gic: interrupt-controller@10139000 {
		compatible = "arm,gic-400";
		interrupt-controller;
		#interrupt-cells = <3>;
		#address-cells = <0>;
		reg = <0x10139000 0x1000>,
		      <0x1013a000 0x1000>,
		      <0x1013c000 0x2000>,
		      <0x1013e000 0x2000>;
		interrupts = <GIC_PPI 9 0xf04>;
	};

	u2phy: usb2phy {
		compatible = "rockchip,rk3128-usb2phy";
		reg = <0x017c 0x0c>;
		rockchip,grf = <&grf>;
		clocks = <&cru SCLK_OTGPHY0>;
		clock-names = "phyclk";
		#clock-cells = <0>;
		clock-output-names = "usb480m_phy";
		status = "disabled";

		u2phy_otg: otg-port {
			#phy-cells = <0>;
			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "otg-bvalid", "otg-id",
					  "linestate";
			status = "disabled";
		};

		u2phy_host: host-port {
			#phy-cells = <0>;
			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "linestate";
			status = "disabled";
		};
	};

	usb_otg: usb@10180000 {
		compatible = "rockchip,rk3128-usb", "rockchip,rk3066-usb", "snps,dwc2";
		reg = <0x10180000 0x40000>;
		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
		clocks = <&cru HCLK_OTG>;
		clock-names = "otg";
		dr_mode = "otg";
		phys = <&u2phy_otg>;
		phy-names = "usb2-phy";
		status = "disabled";
	};

	usb_host_ehci: usb@101c0000 {
		compatible = "generic-ehci";
		reg = <0x101c0000 0x20000>;
		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
		phys = <&u2phy_host>;
		phy-names = "usb";
		status = "disabled";
	};

	usb_host_ohci: usb@101e0000 {
		compatible = "generic-ohci";
		reg = <0x101e0000 0x20000>;
		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
		phys = <&u2phy_host>;
		phy-names = "usb";
		status = "disabled";
	};

	sdmmc: mmc@10214000 {
		compatible = "rockchip,rk3128-dw-mshc", "rockchip,rk3288-dw-mshc";
		reg = <0x10214000 0x4000>;
		max-frequency = <150000000>;
		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
		fifo-depth = <0x100>;
		pinctrl-names = "default";
		pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
		bus-width = <4>;
		status = "disabled";
	};

	emmc: mmc@1021c000 {
		compatible = "rockchip,rk3128-dw-mshc", "rockchip,rk3288-dw-mshc";
		reg = <0x1021c000 0x4000>;
		max-frequency = <150000000>;
		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
		bus-width = <8>;
		default-sample-phase = <158>;
		num-slots = <1>;
		fifo-depth = <0x100>;
		pinctrl-names = "default";
		pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
		resets = <&cru SRST_EMMC>;
		reset-names = "reset";
		status = "disabled";
	};

	i2c0: i2c@20072000 {
		compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c";
		reg = <20072000 0x1000>;
		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
		#address-cells = <1>;
		#size-cells = <0>;
		clock-names = "i2c";
		clocks = <&cru PCLK_I2C0>;
		pinctrl-names = "default";
		pinctrl-0 = <&i2c0_xfer>;
	};

	i2c1: i2c@20056000 {
		compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c";
		reg = <0x20056000 0x1000>;
		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
		#address-cells = <1>;
		#size-cells = <0>;
		clock-names = "i2c";
		clocks = <&cru PCLK_I2C1>;
		pinctrl-names = "default";
		pinctrl-0 = <&i2c1_xfer>;
	};

	i2c2: i2c@2005a000 {
		compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c";
		reg = <0x2005a000 0x1000>;
		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
		#address-cells = <1>;
		#size-cells = <0>;
		clock-names = "i2c";
		clocks = <&cru PCLK_I2C2>;
		pinctrl-names = "default";
		pinctrl-0 = <&i2c2_xfer>;
	};

	i2c3: i2c@2005e000 {
		compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c";
		reg = <0x2005e000 0x1000>;
		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
		#address-cells = <1>;
		#size-cells = <0>;
		clock-names = "i2c";
		clocks = <&cru PCLK_I2C3>;
		pinctrl-names = "default";
		pinctrl-0 = <&i2c3_xfer>;
	};

	spi0: spi@20074000 {
		compatible = "rockchip,rk3128-spi", "rockchip,rk3066-spi";
		reg = <0x20074000 0x1000>;
		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
		#address-cells = <1>;
		#size-cells = <0>;
		pinctrl-names = "default";
		pinctrl-0 = <&spi0_txd_mux0 &spi0_rxd_mux0 &spi0_clk_mux0 &spi0_cs0_mux0 &spi0_cs1_mux0>;
		rockchip,spi-src-clk = <0>;
		num-cs = <2>;
		clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
		clock-names = "spiclk", "apb_pclk";
		dmas = <&pdma 8>, <&pdma 9>;
		#dma-cells = <2>;
		dma-names = "tx", "rx";
	};

	grf: syscon@20008000 {
		compatible = "rockchip,rk3128-grf", "syscon";
		reg = <0x20008000 0x1000>;
	};

	pinctrl: pinctrl@20008000 {
		compatible = "rockchip,rk3128-pinctrl";
		reg = <0x20008000 0xA8>,
		      <0x200080A8 0x4C>,
		      <0x20008118 0x20>,
		      <0x20008100 0x04>;
		reg-names = "base", "mux", "pull", "drv";
		rockchip,grf = <&grf>;
		#address-cells = <1>;
		#size-cells = <1>;
		ranges;

		gpio0: gpio@2007c000 {
			compatible = "rockchip,gpio-bank";
			reg = <0x2007c000 0x100>;
			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&cru PCLK_GPIO0>;
			gpio-controller;
			#gpio-cells = <2>;
			interrupt-controller;
			#interrupt-cells = <2>;
		};

		gpio1: gpio@20080000 {
			compatible = "rockchip,gpio-bank";
			reg = <0x20080000 0x100>;
			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&cru PCLK_GPIO1>;
			gpio-controller;
			#gpio-cells = <2>;
			interrupt-controller;
			#interrupt-cells = <2>;
		};

		gpio2: gpio@20084000 {
			compatible = "rockchip,gpio-bank";
			reg = <0x20084000 0x100>;
			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&cru PCLK_GPIO2>;
			gpio-controller;
			#gpio-cells = <2>;
			interrupt-controller;
			#interrupt-cells = <2>;
		};

		gpio3: gpio@20088000 {
			compatible = "rockchip,gpio-bank";
			reg = <0x20088000 0x100>;
			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&cru PCLK_GPIO3>;
			gpio-controller;
			#gpio-cells = <2>;
			interrupt-controller;
			#interrupt-cells = <2>;
		};

		pcfg_pull_up: pcfg-pull-up {
			bias-pull-up;
		};

		pcfg_pull_down: pcfg-pull-down {
			bias-pull-down;
		};

		pcfg_pull_none: pcfg-pull-none {
			bias-disable;
		};

		emmc {
			/*
			 * We run eMMC at max speed; bump up drive strength.
			 * We also have external pulls, so disable the internal ones.
			 */

			emmc_clk: emmc-clk {
				rockchip,pins = <2 RK_PA7 2 &pcfg_pull_none>;
			};

			emmc_cmd: emmc-cmd {
				rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none>;
			};

			emmc_pwren: emmc-pwren {
				rockchip,pins = <2 RK_PA5 2 &pcfg_pull_none>;
			};

			emmc_bus8: emmc-bus8 {
				rockchip,pins = <1 RK_PD0 2 &pcfg_pull_none>,
						<1 RK_PD1 2 &pcfg_pull_none>,
						<1 RK_PD2 2 &pcfg_pull_none>,
						<1 RK_PD3 2 &pcfg_pull_none>,
						<1 RK_PD4 2 &pcfg_pull_none>,
						<1 RK_PD5 2 &pcfg_pull_none>,
						<1 RK_PD6 2 &pcfg_pull_none>,
						<1 RK_PD7 2 &pcfg_pull_none>;
			};
		};

		nandc{
			nandc_ale:nandc-ale {
				rockchip,pins = <0 RK_PC2 1 &pcfg_pull_none>;
			};

			nandc_cle:nandc-cle {
				rockchip,pins = <0 RK_PC2 1 &pcfg_pull_none>;
			};

			nandc_wrn:nandc-wrn {
				rockchip,pins = <0 RK_PC2 1 &pcfg_pull_none>;
			};

			nandc_rdn:nandc-rdn {
				rockchip,pins = <0 RK_PC2 1 &pcfg_pull_none>;
			};

			nandc_rdy:nandc-rdy {
				rockchip,pins = <0 RK_PC2 1 &pcfg_pull_none>;
			};

			nandc_cs0:nandc-cs0 {
				rockchip,pins = <0 RK_PC2 1 &pcfg_pull_none>;
			};

			nandc_data: nandc-data {
				rockchip,pins = <0 RK_PC2 1 &pcfg_pull_none>;
			};
		};

		uart0 {
			uart0_xfer: uart0-xfer {
				rockchip,pins = <0 RK_PC0 1 &pcfg_pull_none>,
						<0 RK_PC1 1 &pcfg_pull_none>;
			};

			uart0_cts: uart0-cts {
				rockchip,pins = <0 RK_PC2 1 &pcfg_pull_none>;
			};

			uart0_rts: uart0-rts {
				rockchip,pins = <0 RK_PC3 1 &pcfg_pull_none>;
			};
		};

		uart1 {
			uart1_xfer: uart1-xfer {
				rockchip,pins = <2 RK_PC6 1 &pcfg_pull_none>,
						<2 RK_PC7 1 &pcfg_pull_none>;
			};
		};

		uart2 {
			uart2_xfer: uart2-xfer {
				rockchip,pins = <1 RK_PC2 2 &pcfg_pull_none>,
						<1 RK_PC3 2 &pcfg_pull_none>;
			};
		};

		sdmmc {
			sdmmc_clk: sdmmc-clk {
				rockchip,pins = <1 RK_PC0 1 &pcfg_pull_none>;
			};

			sdmmc_cmd: sdmmc-cmd {
				rockchip,pins = <1 RK_PC1 1 &pcfg_pull_up>;
			};

			sdmmc_wp: sdmmc-wp {
				rockchip,pins = <1 RK_PA7 1 &pcfg_pull_up>;
			};

			sdmmc_pwren: sdmmc-pwren {
				rockchip,pins = <1 RK_PB6 1 &pcfg_pull_up>;
			};

			sdmmc_bus4: sdmmc-bus4 {
				rockchip,pins = <1 RK_PC2 1 &pcfg_pull_up>,
						<1 RK_PC3 1 &pcfg_pull_up>,
						<1 RK_PC4 1 &pcfg_pull_up>,
						<1 RK_PC5 1 &pcfg_pull_up>;
			};
		};

		pwm0 {
			pwm0_pin: pwm0-pin {
				rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>;
			};
		};

		pwm1 {
			pwm1_pin: pwm1-pin {
				rockchip,pins = <0 RK_PA1 2 &pcfg_pull_none>;
			};
		};

		pwm2 {
			pwm2_pin: pwm2-pin {
				rockchip,pins = <0 RK_PA1 2 &pcfg_pull_none>;
			};
		};

		pwm3 {
			pwm3_pin: pwm3-pin {
				rockchip,pins = <0 RK_PD3 1 &pcfg_pull_none>;
			};
		};

		i2c0 {
			i2c0_xfer: i2c0-xfer {
				rockchip,pins = <0 RK_PA0 1 &pcfg_pull_none>,
						<0 RK_PA1 1 &pcfg_pull_none>;
			};
		};

		i2c1 {
			i2c1_xfer: i2c1-xfer {
				rockchip,pins = <0 RK_PA2 1 &pcfg_pull_none>,
						<0 RK_PA3 1 &pcfg_pull_none>;
			};
		};

		i2c2 {
			i2c2_xfer: i2c2-xfer {
				rockchip,pins = <2 RK_PC4 3 &pcfg_pull_none>,
						<2 RK_PC5 3 &pcfg_pull_none>;
			};
		};

		i2c3 {
			i2c3_xfer: i2c3-xfer {
				rockchip,pins = <0 RK_PA6 1 &pcfg_pull_none>,
						<0 RK_PA7 1 &pcfg_pull_none>;
			};
		};

		spi0 {
			spi0_txd_mux0:spi0-txd-mux0 {
				rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none>;
			};

			spi0_rxd_mux0:spi0-rxd-mux0 {
				rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none>;
			};

			spi0_clk_mux0:spi0-clk-mux0 {
				rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none>;
			};

			spi0_cs0_mux0:spi0-cs0-mux0 {
				rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none>;
			};

			spi0_cs1_mux0:spi0-cs1-mux0 {
				rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none>;
			};
		};

	};
};