u-boot/drivers/rtc/rx8025.c

307 lines
6.6 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2007
* Matthias Fuchs, esd gmbh, matthias.fuchs@esd-electronics.com.
*/
/*
* Epson RX8025 RTC driver.
*/
#include <common.h>
#include <command.h>
#include <dm.h>
#include <i2c.h>
#include <rtc.h>
/*---------------------------------------------------------------------*/
#undef DEBUG_RTC
#ifdef DEBUG_RTC
#define DEBUGR(fmt,args...) printf(fmt ,##args)
#else
#define DEBUGR(fmt,args...)
#endif
/*---------------------------------------------------------------------*/
#ifndef CONFIG_SYS_I2C_RTC_ADDR
# define CONFIG_SYS_I2C_RTC_ADDR 0x32
#endif
#ifdef CONFIG_DM_RTC
#define DEV_TYPE struct udevice
#else
/* Local udevice */
struct ludevice {
u8 chip;
};
#define DEV_TYPE struct ludevice
#endif
/*
* RTC register addresses
*/
#define RTC_SEC_REG_ADDR 0x00
#define RTC_MIN_REG_ADDR 0x01
#define RTC_HR_REG_ADDR 0x02
#define RTC_DAY_REG_ADDR 0x03
#define RTC_DATE_REG_ADDR 0x04
#define RTC_MON_REG_ADDR 0x05
#define RTC_YR_REG_ADDR 0x06
#define RTC_CTL1_REG_ADDR 0x0e
#define RTC_CTL2_REG_ADDR 0x0f
/*
* Control register 1 bits
*/
#define RTC_CTL1_BIT_2412 0x20
/*
* Control register 2 bits
*/
#define RTC_CTL2_BIT_PON 0x10
#define RTC_CTL2_BIT_VDET 0x40
#define RTC_CTL2_BIT_XST 0x20
#define RTC_CTL2_BIT_VDSL 0x80
/*
* Note: the RX8025 I2C RTC requires register
* reads and write to consist of a single bus
* cycle. It is not allowed to write the register
* address in a first cycle that is terminated by
* a STOP condition. The chips needs a 'restart'
* sequence (start sequence without a prior stop).
* This driver has been written for a 4xx board.
* U-Boot's 4xx i2c driver is currently not capable
* to generate such cycles to some work arounds
* are used.
*/
/* static uchar rtc_read (uchar reg); */
#ifdef CONFIG_DM_RTC
/*
* on mpc85xx based board with DM and offset len 1
* accessing rtc works fine. May we can drop this ?
*/
#define rtc_read(reg) buf[(reg) & 0xf]
#else
#define rtc_read(reg) buf[((reg) + 1) & 0xf]
#endif
static int rtc_write(DEV_TYPE *dev, uchar reg, uchar val);
/*
* Get the current time from the RTC
*/
static int rx8025_rtc_get(DEV_TYPE *dev, struct rtc_time *tmp)
{
int rel = 0;
uchar sec, min, hour, mday, wday, mon, year, ctl2;
uchar buf[16];
#ifdef CONFIG_DM_RTC
if (dm_i2c_read(dev, 0, buf, sizeof(buf))) {
#else
if (i2c_read(dev->chip, 0, 0, buf, 16)) {
#endif
printf("Error reading from RTC\n");
return -EIO;
}
sec = rtc_read(RTC_SEC_REG_ADDR);
min = rtc_read(RTC_MIN_REG_ADDR);
hour = rtc_read(RTC_HR_REG_ADDR);
wday = rtc_read(RTC_DAY_REG_ADDR);
mday = rtc_read(RTC_DATE_REG_ADDR);
mon = rtc_read(RTC_MON_REG_ADDR);
year = rtc_read(RTC_YR_REG_ADDR);
DEBUGR("Get RTC year: %02x mon: %02x mday: %02x wday: %02x "
"hr: %02x min: %02x sec: %02x\n",
year, mon, mday, wday, hour, min, sec);
/* dump status */
ctl2 = rtc_read(RTC_CTL2_REG_ADDR);
if (ctl2 & RTC_CTL2_BIT_PON) {
printf("RTC: power-on detected\n");
rel = -1;
}
if (ctl2 & RTC_CTL2_BIT_VDET) {
printf("RTC: voltage drop detected\n");
rel = -1;
}
if (!(ctl2 & RTC_CTL2_BIT_XST)) {
printf("RTC: oscillator stop detected\n");
rel = -1;
}
tmp->tm_sec = bcd2bin(sec & 0x7F);
tmp->tm_min = bcd2bin(min & 0x7F);
if (rtc_read(RTC_CTL1_REG_ADDR) & RTC_CTL1_BIT_2412)
tmp->tm_hour = bcd2bin(hour & 0x3F);
else
tmp->tm_hour = bcd2bin(hour & 0x1F) % 12 +
((hour & 0x20) ? 12 : 0);
tmp->tm_mday = bcd2bin (mday & 0x3F);
tmp->tm_mon = bcd2bin (mon & 0x1F);
tmp->tm_year = bcd2bin (year) + ( bcd2bin (year) >= 70 ? 1900 : 2000);
tmp->tm_wday = bcd2bin (wday & 0x07);
tmp->tm_yday = 0;
tmp->tm_isdst= 0;
DEBUGR("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
return rel;
}
/*
* Set the RTC
*/
static int rx8025_rtc_set(DEV_TYPE *dev, const struct rtc_time *tmp)
{
DEBUGR("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
if (tmp->tm_year < 1970 || tmp->tm_year > 2069)
printf("WARNING: year should be between 1970 and 2069!\n");
if (rtc_write(dev, RTC_YR_REG_ADDR, bin2bcd(tmp->tm_year % 100)))
return -EIO;
if (rtc_write(dev, RTC_MON_REG_ADDR, bin2bcd(tmp->tm_mon)))
return -EIO;
if (rtc_write(dev, RTC_DAY_REG_ADDR, bin2bcd(tmp->tm_wday)))
return -EIO;
if (rtc_write(dev, RTC_DATE_REG_ADDR, bin2bcd(tmp->tm_mday)))
return -EIO;
if (rtc_write(dev, RTC_HR_REG_ADDR, bin2bcd(tmp->tm_hour)))
return -EIO;
if (rtc_write(dev, RTC_MIN_REG_ADDR, bin2bcd(tmp->tm_min)))
return -EIO;
if (rtc_write(dev, RTC_SEC_REG_ADDR, bin2bcd(tmp->tm_sec)))
return -EIO;
return rtc_write(dev, RTC_CTL1_REG_ADDR, RTC_CTL1_BIT_2412);
}
/*
* Reset the RTC
*/
static int rx8025_rtc_reset(DEV_TYPE *dev)
{
uchar buf[16];
uchar ctl2;
#ifdef CONFIG_DM_RTC
if (dm_i2c_read(dev, 0, buf, sizeof(buf))) {
#else
if (i2c_read(dev->chip, 0, 0, buf, 16)) {
#endif
printf("Error reading from RTC\n");
return -EIO;
}
ctl2 = rtc_read(RTC_CTL2_REG_ADDR);
ctl2 &= ~(RTC_CTL2_BIT_PON | RTC_CTL2_BIT_VDET);
ctl2 |= RTC_CTL2_BIT_XST | RTC_CTL2_BIT_VDSL;
return rtc_write(dev, RTC_CTL2_REG_ADDR, ctl2);
}
/*
* Helper functions
*/
static int rtc_write(DEV_TYPE *dev, uchar reg, uchar val)
{
uchar buf[2];
buf[0] = reg << 4;
buf[1] = val;
#ifdef CONFIG_DM_RTC
if (dm_i2c_write(dev, 0, buf, 2)) {
#else
if (i2c_write(dev->chip, 0, 0, buf, 2) != 0) {
#endif
printf("Error writing to RTC\n");
return -EIO;
}
return 0;
}
#ifdef CONFIG_DM_RTC
static int rx8025_probe(struct udevice *dev)
{
uchar buf[16];
int ret = 0;
if (i2c_get_chip_offset_len(dev) != 1)
ret = i2c_set_chip_offset_len(dev, 1);
if (ret)
return ret;
return dm_i2c_read(dev, 0, buf, sizeof(buf));
}
static const struct rtc_ops rx8025_rtc_ops = {
.get = rx8025_rtc_get,
.set = rx8025_rtc_set,
.reset = rx8025_rtc_reset,
};
static const struct udevice_id rx8025_rtc_ids[] = {
{ .compatible = "epson,rx8025" },
{ }
};
U_BOOT_DRIVER(rx8010sj_rtc) = {
.name = "rx8025_rtc",
.id = UCLASS_RTC,
.probe = rx8025_probe,
.of_match = rx8025_rtc_ids,
.ops = &rx8025_rtc_ops,
};
#else
int rtc_get(struct rtc_time *tm)
{
struct ludevice dev = {
.chip = CONFIG_SYS_I2C_RTC_ADDR,
};
return rx8025_rtc_get(&dev, tm);
}
int rtc_set(struct rtc_time *tm)
{
struct ludevice dev = {
.chip = CONFIG_SYS_I2C_RTC_ADDR,
};
return rx8025_rtc_set(&dev, tm);
}
void rtc_reset(void)
{
struct ludevice dev = {
.chip = CONFIG_SYS_I2C_RTC_ADDR,
};
rx8025_rtc_reset(&dev);
}
#endif