u-boot/include/dt-bindings/pinctrl/stm32-pinfunc.h

43 lines
950 B
C
Raw Normal View History

/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
/*
* Copyright (C) STMicroelectronics 2017 - All Rights Reserved
* Author: Torgue Alexandre <alexandre.torgue@st.com> for STMicroelectronics.
*/
#ifndef _DT_BINDINGS_STM32_PINFUNC_H
#define _DT_BINDINGS_STM32_PINFUNC_H
/* define PIN modes */
#define GPIO 0x0
#define AF0 0x1
#define AF1 0x2
#define AF2 0x3
#define AF3 0x4
#define AF4 0x5
#define AF5 0x6
#define AF6 0x7
#define AF7 0x8
#define AF8 0x9
#define AF9 0xa
#define AF10 0xb
#define AF11 0xc
#define AF12 0xd
#define AF13 0xe
#define AF14 0xf
#define AF15 0x10
#define ANALOG 0x11
/* define Pins number*/
#define PIN_NO(port, line) (((port) - 'A') * 0x10 + (line))
#define STM32_PINMUX(port, line, mode) (((PIN_NO(port, line)) << 8) | (mode))
/* package information */
#define STM32MP_PKG_AA 0x1
#define STM32MP_PKG_AB 0x2
#define STM32MP_PKG_AC 0x4
#define STM32MP_PKG_AD 0x8
#endif /* _DT_BINDINGS_STM32_PINFUNC_H */
ARM: dts: stm32mp15: alignment with v5.19 Device tree alignment with Linux kernel v5.19-rc1 - ARM: dts: stm32: Add alternate pinmux for ethernet0 pins - ARM: dts: stm32: Add alternate pinmux for mco2 pins - ARM: dts: stm32: fix pinctrl node name warnings (MPU soc) - ARM: dts: stm32: stm32mp15-pinctrl: add spi1-1 pinmux group - dt-bindings: clock: add IDs for SCMI clocks on stm32mp15 - dt-bindings: reset: add IDs for SCMI reset domains on stm32mp15 - dt-bindings: clock: stm32mp15: rename CK_SCMI define - dt-bindings: reset: stm32mp15: rename RST_SCMI define - dt-bindings: reset: add MCU HOLD BOOT ID for SCMI reset domains on stm32mp15 - dt-bindings: clk: cleanup comments - ARM: dts: align SPI NOR node name with dtschema - ARM: dts: stm32: enable optee firmware and SCMI support on STM32MP15 - ARM: dts: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1) - ARM: dts: stm32: move SCMI related nodes in a dedicated file for stm32mp15 + patch from stm32-dt-for-v5.19-fixes-2 - ARM: dts: stm32: move SCMI related nodes in a dedicated file for stm32mp15 - ARM: dts: stm32: fix pwr regulators references to use scmi - ARM: dts: stm32: use the correct clock source for CEC on stm32mp151 - ARM: dts: stm32: DSI should use LSE SCMI clock on DK1/ED1 STM32 board - ARM: dts: stm32: delete fixed clock node on STM32MP15-SCMI - ARM: dts: stm32: add missing usbh clock and fix clk order on stm32mp15 Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-07-05 14:55:54 +00:00