u-boot/board/topic/zynq/Makefile

# SPDX-License-Identifier: GPL-2.0+

obj-y	:= board.o
obj-y	+= ../../xilinx/common/board.o

# Remove quotes
hw-platform-y :=$(shell echo $(CONFIG_DEFAULT_DEVICE_TREE))

obj-$(CONFIG_SPL_BUILD) += $(hw-platform-y)/ps7_init_gpl.o
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> 2018-05-06 21:58:06 +00:00			`# SPDX-License-Identifier: GPL-2.0+`
ARM: zynq: Add support for the topic-miami system-on-modules and carrier boards The topic-miami SoMs contain a Zynq xc7z015 or xc7z030 SoC, 1GB DDR3L RAM, 32MB QSPI NOR flash and 256MB NAND flash. The topic-miamiplus SoMs contain a Zynq xc7z035, xc7z045 or xc7z100 SoC, 2x 1GB DDR3L RAM, 64MB dual-parallel QSPI flash, clock sources and a fan controller. The "Florida" carrier boards add SD, USB, ethernet and other interfaces. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Michal Simek <michal.simek@xilinx.com> 2016-09-30 06:13:13 +00:00
			`obj-y := board.o`
xilinx: Introduce board_late_init_xilinx() This function should keep common shared late configurations for Xilinx SoCs. Signed-off-by: Michal Simek <michal.simek@xilinx.com> 2020-03-31 10:39:37 +00:00			`obj-y += ../../xilinx/common/board.o`
ARM: zynq: Add support for the topic-miami system-on-modules and carrier boards The topic-miami SoMs contain a Zynq xc7z015 or xc7z030 SoC, 1GB DDR3L RAM, 32MB QSPI NOR flash and 256MB NAND flash. The topic-miamiplus SoMs contain a Zynq xc7z035, xc7z045 or xc7z100 SoC, 2x 1GB DDR3L RAM, 64MB dual-parallel QSPI flash, clock sources and a fan controller. The "Florida" carrier boards add SD, USB, ethernet and other interfaces. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Michal Simek <michal.simek@xilinx.com> 2016-09-30 06:13:13 +00:00
			`# Remove quotes`
			`hw-platform-y :=$(shell echo $(CONFIG_DEFAULT_DEVICE_TREE))`

arm: zynq: Move common ps7_init* initialization to arch code This patch is based on work done in topic board where the first address word also storing operation which should be done. This is reducing size of configuration data. This patch is not breaking an option to copy default ps7_init_gpl* files from hdf file but it is doing preparation for ps7_init* consolidation. The patch is also marking ps7_config as weak function. Signed-off-by: Michal Simek <michal.simek@xilinx.com> 2017-11-10 08:47:28 +00:00			`obj-$(CONFIG_SPL_BUILD) += $(hw-platform-y)/ps7_init_gpl.o`