u-boot/arch/arm/include/asm/arch-sunxi/dram_sun50i_h6.h

337 lines
9.9 KiB
C
Raw Normal View History

/*
* H6 dram controller register and constant defines
*
* (C) Copyright 2017 Icenowy Zheng <icenowy@aosc.io>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _SUNXI_DRAM_SUN50I_H6_H
#define _SUNXI_DRAM_SUN50I_H6_H
#include <stdbool.h>
#ifndef __ASSEMBLY__
#include <linux/bitops.h>
#endif
enum sunxi_dram_type {
SUNXI_DRAM_TYPE_DDR3 = 3,
SUNXI_DRAM_TYPE_DDR4,
SUNXI_DRAM_TYPE_LPDDR2 = 6,
SUNXI_DRAM_TYPE_LPDDR3,
};
static inline bool sunxi_dram_is_lpddr(int type)
{
return type >= SUNXI_DRAM_TYPE_LPDDR2;
}
/*
* The following information is mainly retrieved by disassembly and some FPGA
* test code of sun50iw3 platform.
*/
struct sunxi_mctl_com_reg {
u32 cr; /* 0x000 control register */
u8 reserved_0x004[4]; /* 0x004 */
u32 unk_0x008; /* 0x008 */
u32 tmr; /* 0x00c timer register */
u8 reserved_0x010[4]; /* 0x010 */
u32 unk_0x014; /* 0x014 */
u8 reserved_0x018[8]; /* 0x018 */
u32 maer0; /* 0x020 master enable register 0 */
u32 maer1; /* 0x024 master enable register 1 */
u32 maer2; /* 0x028 master enable register 2 */
u8 reserved_0x02c[468]; /* 0x02c */
u32 bwcr; /* 0x200 bandwidth control register */
u8 reserved_0x204[12]; /* 0x204 */
/*
* The last master configured by BSP libdram is at 0x49x, so the
* size of this struct array is set to 41 (0x29) now.
*/
struct {
u32 cfg0; /* 0x0 */
u32 cfg1; /* 0x4 */
u8 reserved_0x8[8]; /* 0x8 */
} master[41]; /* 0x210 + index * 0x10 */
};
check_member(sunxi_mctl_com_reg, master[40].reserved_0x8, 0x498);
/*
* The following register information are retrieved from some similar DRAM
* controllers, including the DRAM controllers in Allwinner A23/A80 SoCs,
* Rockchip RK3328 SoC, NXP i.MX7 SoCs and Xilinx Zynq UltraScale+ SoCs.
*
* The DRAM controller in Allwinner A23/A80 SoCs and NXP i.MX7 SoCs seems
* to be older than the one in Allwinner H6, as the DRAMTMG9 register
* is missing in these SoCs. (From the product specifications of these
* SoCs they're not capable of DDR4)
*
* Information sources:
* - dram_sun9i.h and dram_sun8i_a23.h in the same directory.
* - sdram_rk3328.h from the RK3328 TPL DRAM patchset
* - i.MX 7Solo Applications Processor Reference Manual (IMX7SRM)
* - Zynq UltraScale+ MPSoC Register Reference (UG1087)
*/
struct sunxi_mctl_ctl_reg {
u32 mstr; /* 0x000 */
u32 statr; /* 0x004 unused */
u32 mstr1; /* 0x008 unused */
u32 unk_0x00c; /* 0x00c */
u32 mrctrl0; /* 0x010 unused */
u32 mrctrl1; /* 0x014 unused */
u32 mrstatr; /* 0x018 unused */
u32 mrctrl2; /* 0x01c unused */
u32 derateen; /* 0x020 unused */
u32 derateint; /* 0x024 unused */
u8 reserved_0x028[8]; /* 0x028 */
u32 pwrctl; /* 0x030 unused */
u32 pwrtmg; /* 0x034 unused */
u32 hwlpctl; /* 0x038 unused */
u8 reserved_0x03c[20]; /* 0x03c */
u32 rfshctl0; /* 0x050 unused */
u32 rfshctl1; /* 0x054 unused */
u8 reserved_0x058[8]; /* 0x05c */
u32 rfshctl3; /* 0x060 */
u32 rfshtmg; /* 0x064 */
u8 reserved_0x068[104]; /* 0x068 reserved for ECC&CRC (from ZynqMP) */
u32 init[8]; /* 0x0d0 */
u32 dimmctl; /* 0x0f0 unused */
u32 rankctl; /* 0x0f4 */
u8 reserved_0x0f8[8]; /* 0x0f8 */
u32 dramtmg[17]; /* 0x100 */
u8 reserved_0x144[60]; /* 0x144 */
u32 zqctl[3]; /* 0x180 */
u32 zqstat; /* 0x18c unused */
u32 dfitmg0; /* 0x190 */
u32 dfitmg1; /* 0x194 */
u32 dfilpcfg[2]; /* 0x198 unused */
u32 dfiupd[3]; /* 0x1a0 */
u32 reserved_0x1ac; /* 0x1ac */
u32 dfimisc; /* 0x1b0 */
u32 dfitmg2; /* 0x1b4 unused, may not exist */
u8 reserved_0x1b8[8]; /* 0x1b8 */
u32 dbictl; /* 0x1c0 */
u8 reserved_0x1c4[60]; /* 0x1c4 */
u32 addrmap[12]; /* 0x200 */
u8 reserved_0x230[16]; /* 0x230 */
u32 odtcfg; /* 0x240 */
u32 odtmap; /* 0x244 */
u8 reserved_0x248[8]; /* 0x248 */
u32 sched[2]; /* 0x250 */
u8 reserved_0x258[180]; /* 0x258 */
u32 dbgcmd; /* 0x30c unused */
u32 dbgstat; /* 0x310 unused */
u8 reserved_0x314[12]; /* 0x314 */
u32 swctl; /* 0x320 */
u32 swstat; /* 0x324 */
};
check_member(sunxi_mctl_ctl_reg, swstat, 0x324);
#define MSTR_DEVICETYPE_DDR3 BIT(0)
#define MSTR_DEVICETYPE_LPDDR2 BIT(2)
#define MSTR_DEVICETYPE_LPDDR3 BIT(3)
#define MSTR_DEVICETYPE_DDR4 BIT(4)
#define MSTR_DEVICETYPE_MASK GENMASK(5, 0)
#define MSTR_2TMODE BIT(10)
#define MSTR_BUSWIDTH_FULL (0 << 12)
#define MSTR_BUSWIDTH_HALF (1 << 12)
#define MSTR_ACTIVE_RANKS(x) (((x == 2) ? 3 : 1) << 24)
#define MSTR_BURST_LENGTH(x) (((x) >> 1) << 16)
/*
* The following register information is based on Zynq UltraScale+
* MPSoC Register Reference, as it's the currently only known
* DDR PHY similar to the one used in H6; however although the
* map is similar, the bit fields definitions are different.
*
* Other DesignWare DDR PHY's have similar register names, but the
* offset and definitions are both different.
*/
struct sunxi_mctl_phy_reg {
u32 ver; /* 0x000 guess based on similar PHYs */
u32 pir; /* 0x004 */
u8 reserved_0x008[8]; /* 0x008 */
/*
* The ZynqMP manual didn't document PGCR1, however this register
* exists on H6 and referenced by libdram.
*/
u32 pgcr[8]; /* 0x010 */
/*
* By comparing the hardware and the ZynqMP manual, the PGSR seems
* to start at 0x34 on H6.
*/
u8 reserved_0x030[4]; /* 0x030 */
u32 pgsr[3]; /* 0x034 */
u32 ptr[7]; /* 0x040 */
/*
* According to ZynqMP reference there's PLLCR0~6 in this area,
* but they're tagged "Type B PLL Only" and H6 seems to have
* no them.
* 0x080 is not present in ZynqMP reference but it seems to be
* present on H6.
*/
u8 reserved_0x05c[36]; /* 0x05c */
u32 unk_0x080; /* 0x080 */
u8 reserved_0x084[4]; /* 0x084 */
u32 dxccr; /* 0x088 */
u8 reserved_0x08c[4]; /* 0x08c */
u32 dsgcr; /* 0x090 */
u8 reserved_0x094[4]; /* 0x094 */
u32 odtcr; /* 0x098 */
u8 reserved_0x09c[4]; /* 0x09c */
u32 aacr; /* 0x0a0 */
u8 reserved_0x0a4[32]; /* 0x0a4 */
u32 gpr1; /* 0x0c4 */
u8 reserved_0x0c8[56]; /* 0x0c8 */
u32 dcr; /* 0x100 */
u8 reserved_0x104[12]; /* 0x104 */
u32 dtpr[7]; /* 0x110 */
u8 reserved_0x12c[20]; /* 0x12c */
u32 rdimmgcr[3]; /* 0x140 */
u8 reserved_0x14c[4]; /* 0x14c */
u32 rdimmcr[5]; /* 0x150 */
u8 reserved_0x164[4]; /* 0x164 */
u32 schcr[2]; /* 0x168 */
u8 reserved_0x170[16]; /* 0x170 */
/*
* The ZynqMP manual documents MR0~7, 11~14 and 22.
*/
u32 mr[23]; /* 0x180 */
u8 reserved_0x1dc[36]; /* 0x1dc */
u32 dtcr[2]; /* 0x200 */
u32 dtar[3]; /* 0x208 */
u8 reserved_0x214[4]; /* 0x214 */
u32 dtdr[2]; /* 0x218 */
u8 reserved_0x220[16]; /* 0x220 */
u32 dtedr0; /* 0x230 */
u32 dtedr1; /* 0x234 */
u32 dtedr2; /* 0x238 */
u32 vtdr; /* 0x23c */
u32 catr[2]; /* 0x240 */
u8 reserved_0x248[8];
u32 dqsdr[3]; /* 0x250 */
u32 dtedr3; /* 0x25c */
u8 reserved_0x260[160]; /* 0x260 */
u32 dcuar; /* 0x300 */
u32 dcudr; /* 0x304 */
u32 dcurr; /* 0x308 */
u32 dculr; /* 0x30c */
u32 dcugcr; /* 0x310 */
u32 dcutpr; /* 0x314 */
u32 dcusr[2]; /* 0x318 */
u8 reserved_0x320[444]; /* 0x320 */
u32 rankidr; /* 0x4dc */
u32 riocr[6]; /* 0x4e0 */
u8 reserved_0x4f8[8]; /* 0x4f8 */
u32 aciocr[6]; /* 0x500 */
u8 reserved_0x518[8]; /* 0x518 */
u32 iovcr[2]; /* 0x520 */
u32 vtcr[2]; /* 0x528 */
u8 reserved_0x530[16]; /* 0x530 */
u32 acbdlr[17]; /* 0x540 */
u32 aclcdlr; /* 0x584 */
u8 reserved_0x588[24]; /* 0x588 */
u32 acmdlr[2]; /* 0x5a0 */
u8 reserved_0x5a8[216]; /* 0x5a8 */
struct {
u32 zqcr; /* 0x00 only the first one valid */
u32 zqpr[2]; /* 0x04 */
u32 zqdr[2]; /* 0x0c */
u32 zqor[2]; /* 0x14 */
u32 zqsr; /* 0x1c */
} zq[2]; /* 0x680, 0x6a0 */
u8 reserved_0x6c0[64]; /* 0x6c0 */
struct {
u32 gcr[7]; /* 0x00 */
u8 reserved_0x1c[36]; /* 0x1c */
u32 bdlr0; /* 0x40 */
u32 bdlr1; /* 0x44 */
u32 bdlr2; /* 0x48 */
u8 reserved_0x4c[4]; /* 0x4c */
u32 bdlr3; /* 0x50 */
u32 bdlr4; /* 0x54 */
u32 bdlr5; /* 0x58 */
u8 reserved_0x5c[4]; /* 0x5c */
u32 bdlr6; /* 0x60 */
u8 reserved_0x64[28]; /* 0x64 */
u32 lcdlr[6]; /* 0x80 */
u8 reserved_0x98[8]; /* 0x98 */
u32 mdlr[2]; /* 0xa0 */
u8 reserved_0xa8[24]; /* 0xa8 */
u32 gtr0; /* 0xc0 */
u8 reserved_0xc4[12]; /* 0xc4 */
/*
* DXnRSR0 is not documented in ZynqMP manual but
* it's used in libdram.
*/
u32 rsr[4]; /* 0xd0 */
u32 gsr[4]; /* 0xe0 */
u8 reserved_0xf0[16]; /* 0xf0 */
} dx[4]; /* 0x700, 0x800, 0x900, 0xa00 */
};
check_member(sunxi_mctl_phy_reg, dx[3].reserved_0xf0, 0xaf0);
#define PIR_INIT BIT(0)
#define PIR_ZCAL BIT(1)
#define PIR_CA BIT(2)
#define PIR_PLLINIT BIT(4)
#define PIR_DCAL BIT(5)
#define PIR_PHYRST BIT(6)
#define PIR_DRAMRST BIT(7)
#define PIR_DRAMINIT BIT(8)
#define PIR_WL BIT(9)
#define PIR_QSGATE BIT(10)
#define PIR_WLADJ BIT(11)
#define PIR_RDDSKW BIT(12)
#define PIR_WRDSKW BIT(13)
#define PIR_RDEYE BIT(14)
#define PIR_WREYE BIT(15)
#define PIR_VREF BIT(17)
#define PIR_CTLDINIT BIT(18)
#define PIR_DQS2DQ BIT(20)
#define PIR_DCALPSE BIT(29)
#define PIR_ZCALBYP BIT(30)
#define DCR_LPDDR3 (1 << 0)
#define DCR_DDR3 (3 << 0)
#define DCR_DDR4 (4 << 0)
#define DCR_DDR8BANK BIT(3)
#define DCR_DDR2T BIT(28)
/*
* The delay parameters allow to allegedly specify delay times of some
* unknown unit for each individual bit trace in each of the four data bytes
* the 32-bit wide access consists of. Also three control signals can be
* adjusted individually.
*/
#define NR_OF_BYTE_LANES (32 / BITS_PER_BYTE)
/* The eight data lines (DQn) plus DM, DQS, DQS/DM/DQ Output Enable and DQSN */
#define WR_LINES_PER_BYTE_LANE (BITS_PER_BYTE + 4)
/*
* The eight data lines (DQn) plus DM, DQS, DQS/DM/DQ Output Enable, DQSN,
* Termination and Power down
*/
#define RD_LINES_PER_BYTE_LANE (BITS_PER_BYTE + 6)
struct dram_para {
u32 clk;
enum sunxi_dram_type type;
u8 cols;
u8 rows;
u8 ranks;
u8 bus_full_width;
const u8 dx_read_delays[NR_OF_BYTE_LANES][RD_LINES_PER_BYTE_LANE];
const u8 dx_write_delays[NR_OF_BYTE_LANES][WR_LINES_PER_BYTE_LANE];
};
static inline int ns_to_t(int nanoseconds)
{
const unsigned int ctrl_freq = CONFIG_DRAM_CLK / 2;
return DIV_ROUND_UP(ctrl_freq * nanoseconds, 1000);
}
void mctl_set_timing_params(struct dram_para *para);
#endif /* _SUNXI_DRAM_SUN50I_H6_H */