u-boot/include/scmi_protocols.h

293 lines
6.6 KiB
C
Raw Normal View History

firmware: add SCMI agent uclass This change introduces SCMI agent uclass to interact with a firmware using the SCMI protocols [1]. SCMI agent uclass currently supports a single method to request processing of the SCMI message by an identified server. A SCMI message is made of a byte payload associated to a protocol ID and a message ID, all defined by the SCMI specification [1]. On return from process_msg() method, the caller gets the service response. SCMI agent uclass defines a post bind generic sequence for all devices. The sequence binds all the SCMI protocols listed in the FDT for that SCMI agent device. Currently none, but later change will introduce protocols. This change implements a simple sandbox device for the SCMI agent uclass. The sandbox nicely answers SCMI_NOT_SUPPORTED to SCMI messages. To prepare for further test support, the sandbox exposes a architecture function for test application to read the sandbox emulated devices state. Currently supports 2 SCMI agents, identified by an ID in the FDT device name. The simplistic DM test does nothing yet. SCMI agent uclass is designed for platforms that embed a SCMI server in a firmware hosted somewhere, for example in a companion co-processor or in the secure world of the executing processor. SCMI protocols allow an SCMI agent to discover and access external resources as clock, reset controllers and more. SCMI agent and server communicate following the SCMI specification [1]. This SCMI agent implementation complies with the DT bindings defined in the Linux kernel source tree regarding SCMI agent description since v5.8. Links: [1] https://developer.arm.com/architectures/system-architectures/software-standards/scmi Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Cc: Simon Glass <sjg@chromium.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-09 16:44:00 +00:00
/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
/*
* Copyright (c) 2015-2019, Arm Limited and Contributors. All rights reserved.
* Copyright (C) 2019-2020, Linaro Limited
*/
#ifndef _SCMI_PROTOCOLS_H
#define _SCMI_PROTOCOLS_H
#include <linux/bitops.h>
#include <asm/types.h>
firmware: add SCMI agent uclass This change introduces SCMI agent uclass to interact with a firmware using the SCMI protocols [1]. SCMI agent uclass currently supports a single method to request processing of the SCMI message by an identified server. A SCMI message is made of a byte payload associated to a protocol ID and a message ID, all defined by the SCMI specification [1]. On return from process_msg() method, the caller gets the service response. SCMI agent uclass defines a post bind generic sequence for all devices. The sequence binds all the SCMI protocols listed in the FDT for that SCMI agent device. Currently none, but later change will introduce protocols. This change implements a simple sandbox device for the SCMI agent uclass. The sandbox nicely answers SCMI_NOT_SUPPORTED to SCMI messages. To prepare for further test support, the sandbox exposes a architecture function for test application to read the sandbox emulated devices state. Currently supports 2 SCMI agents, identified by an ID in the FDT device name. The simplistic DM test does nothing yet. SCMI agent uclass is designed for platforms that embed a SCMI server in a firmware hosted somewhere, for example in a companion co-processor or in the secure world of the executing processor. SCMI protocols allow an SCMI agent to discover and access external resources as clock, reset controllers and more. SCMI agent and server communicate following the SCMI specification [1]. This SCMI agent implementation complies with the DT bindings defined in the Linux kernel source tree regarding SCMI agent description since v5.8. Links: [1] https://developer.arm.com/architectures/system-architectures/software-standards/scmi Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Cc: Simon Glass <sjg@chromium.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-09 16:44:00 +00:00
/*
* Subset the SCMI protocols definition
* based on SCMI specification v2.0 (DEN0056B)
* https://developer.arm.com/docs/den0056/b
*/
enum scmi_std_protocol {
SCMI_PROTOCOL_ID_BASE = 0x10,
SCMI_PROTOCOL_ID_POWER_DOMAIN = 0x11,
SCMI_PROTOCOL_ID_SYSTEM = 0x12,
SCMI_PROTOCOL_ID_PERF = 0x13,
SCMI_PROTOCOL_ID_CLOCK = 0x14,
SCMI_PROTOCOL_ID_SENSOR = 0x15,
SCMI_PROTOCOL_ID_RESET_DOMAIN = 0x16,
SCMI_PROTOCOL_ID_VOLTAGE_DOMAIN = 0x17,
firmware: add SCMI agent uclass This change introduces SCMI agent uclass to interact with a firmware using the SCMI protocols [1]. SCMI agent uclass currently supports a single method to request processing of the SCMI message by an identified server. A SCMI message is made of a byte payload associated to a protocol ID and a message ID, all defined by the SCMI specification [1]. On return from process_msg() method, the caller gets the service response. SCMI agent uclass defines a post bind generic sequence for all devices. The sequence binds all the SCMI protocols listed in the FDT for that SCMI agent device. Currently none, but later change will introduce protocols. This change implements a simple sandbox device for the SCMI agent uclass. The sandbox nicely answers SCMI_NOT_SUPPORTED to SCMI messages. To prepare for further test support, the sandbox exposes a architecture function for test application to read the sandbox emulated devices state. Currently supports 2 SCMI agents, identified by an ID in the FDT device name. The simplistic DM test does nothing yet. SCMI agent uclass is designed for platforms that embed a SCMI server in a firmware hosted somewhere, for example in a companion co-processor or in the secure world of the executing processor. SCMI protocols allow an SCMI agent to discover and access external resources as clock, reset controllers and more. SCMI agent and server communicate following the SCMI specification [1]. This SCMI agent implementation complies with the DT bindings defined in the Linux kernel source tree regarding SCMI agent description since v5.8. Links: [1] https://developer.arm.com/architectures/system-architectures/software-standards/scmi Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Cc: Simon Glass <sjg@chromium.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-09 16:44:00 +00:00
};
enum scmi_status_code {
SCMI_SUCCESS = 0,
SCMI_NOT_SUPPORTED = -1,
SCMI_INVALID_PARAMETERS = -2,
SCMI_DENIED = -3,
SCMI_NOT_FOUND = -4,
SCMI_OUT_OF_RANGE = -5,
SCMI_BUSY = -6,
SCMI_COMMS_ERROR = -7,
SCMI_GENERIC_ERROR = -8,
SCMI_HARDWARE_ERROR = -9,
SCMI_PROTOCOL_ERROR = -10,
};
/*
* SCMI Clock Protocol
*/
enum scmi_clock_message_id {
SCMI_CLOCK_RATE_SET = 0x5,
SCMI_CLOCK_RATE_GET = 0x6,
SCMI_CLOCK_CONFIG_SET = 0x7,
};
#define SCMI_CLK_RATE_ASYNC_NOTIFY BIT(0)
#define SCMI_CLK_RATE_ASYNC_NORESP (BIT(0) | BIT(1))
#define SCMI_CLK_RATE_ROUND_DOWN 0
#define SCMI_CLK_RATE_ROUND_UP BIT(2)
#define SCMI_CLK_RATE_ROUND_CLOSEST BIT(3)
/**
* struct scmi_clk_state_in - Message payload for CLOCK_CONFIG_SET command
* @clock_id: SCMI clock ID
* @attributes: Attributes of the targets clock state
*/
struct scmi_clk_state_in {
u32 clock_id;
u32 attributes;
};
/**
* struct scmi_clk_state_out - Response payload for CLOCK_CONFIG_SET command
* @status: SCMI command status
*/
struct scmi_clk_state_out {
s32 status;
};
/**
* struct scmi_clk_state_in - Message payload for CLOCK_RATE_GET command
* @clock_id: SCMI clock ID
* @attributes: Attributes of the targets clock state
*/
struct scmi_clk_rate_get_in {
u32 clock_id;
};
/**
* struct scmi_clk_rate_get_out - Response payload for CLOCK_RATE_GET command
* @status: SCMI command status
* @rate_lsb: 32bit LSB of the clock rate in Hertz
* @rate_msb: 32bit MSB of the clock rate in Hertz
*/
struct scmi_clk_rate_get_out {
s32 status;
u32 rate_lsb;
u32 rate_msb;
};
/**
* struct scmi_clk_state_in - Message payload for CLOCK_RATE_SET command
* @flags: Flags for the clock rate set request
* @clock_id: SCMI clock ID
* @rate_lsb: 32bit LSB of the clock rate in Hertz
* @rate_msb: 32bit MSB of the clock rate in Hertz
*/
struct scmi_clk_rate_set_in {
u32 flags;
u32 clock_id;
u32 rate_lsb;
u32 rate_msb;
};
/**
* struct scmi_clk_rate_set_out - Response payload for CLOCK_RATE_SET command
* @status: SCMI command status
*/
struct scmi_clk_rate_set_out {
s32 status;
};
/*
* SCMI Reset Domain Protocol
*/
enum scmi_reset_domain_message_id {
SCMI_RESET_DOMAIN_ATTRIBUTES = 0x3,
SCMI_RESET_DOMAIN_RESET = 0x4,
};
#define SCMI_RD_NAME_LEN 16
#define SCMI_RD_ATTRIBUTES_FLAG_ASYNC BIT(31)
#define SCMI_RD_ATTRIBUTES_FLAG_NOTIF BIT(30)
#define SCMI_RD_RESET_FLAG_ASYNC BIT(2)
#define SCMI_RD_RESET_FLAG_ASSERT BIT(1)
#define SCMI_RD_RESET_FLAG_CYCLE BIT(0)
/**
* struct scmi_rd_attr_in - Payload for RESET_DOMAIN_ATTRIBUTES message
* @domain_id: SCMI reset domain ID
*/
struct scmi_rd_attr_in {
u32 domain_id;
};
/**
* struct scmi_rd_attr_out - Payload for RESET_DOMAIN_ATTRIBUTES response
* @status: SCMI command status
* @attributes: Retrieved attributes of the reset domain
* @latency: Reset cycle max lantency
* @name: Reset domain name
*/
struct scmi_rd_attr_out {
s32 status;
u32 attributes;
u32 latency;
char name[SCMI_RD_NAME_LEN];
};
/**
* struct scmi_rd_reset_in - Message payload for RESET command
* @domain_id: SCMI reset domain ID
* @flags: Flags for the reset request
* @reset_state: Reset target state
*/
struct scmi_rd_reset_in {
u32 domain_id;
u32 flags;
u32 reset_state;
};
/**
* struct scmi_rd_reset_out - Response payload for RESET command
* @status: SCMI command status
*/
struct scmi_rd_reset_out {
s32 status;
};
/*
* SCMI Voltage Domain Protocol
*/
enum scmi_voltage_domain_message_id {
SCMI_VOLTAGE_DOMAIN_ATTRIBUTES = 0x3,
SCMI_VOLTAGE_DOMAIN_CONFIG_SET = 0x5,
SCMI_VOLTAGE_DOMAIN_CONFIG_GET = 0x6,
SCMI_VOLTAGE_DOMAIN_LEVEL_SET = 0x7,
SCMI_VOLTAGE_DOMAIN_LEVEL_GET = 0x8,
};
#define SCMI_VOLTD_NAME_LEN 16
#define SCMI_VOLTD_CONFIG_MASK GENMASK(3, 0)
#define SCMI_VOLTD_CONFIG_OFF 0
#define SCMI_VOLTD_CONFIG_ON 0x7
/**
* struct scmi_voltd_attr_in - Payload for VOLTAGE_DOMAIN_ATTRIBUTES message
* @domain_id: SCMI voltage domain ID
*/
struct scmi_voltd_attr_in {
u32 domain_id;
};
/**
* struct scmi_voltd_attr_out - Payload for VOLTAGE_DOMAIN_ATTRIBUTES response
* @status: SCMI command status
* @attributes: Retrieved attributes of the voltage domain
* @name: Voltage domain name
*/
struct scmi_voltd_attr_out {
s32 status;
u32 attributes;
char name[SCMI_VOLTD_NAME_LEN];
};
/**
* struct scmi_voltd_config_set_in - Message payload for VOLTAGE_CONFIG_SET cmd
* @domain_id: SCMI voltage domain ID
* @config: Configuration data of the voltage domain
*/
struct scmi_voltd_config_set_in {
u32 domain_id;
u32 config;
};
/**
* struct scmi_voltd_config_set_out - Response for VOLTAGE_CONFIG_SET command
* @status: SCMI command status
*/
struct scmi_voltd_config_set_out {
s32 status;
};
/**
* struct scmi_voltd_config_get_in - Message payload for VOLTAGE_CONFIG_GET cmd
* @domain_id: SCMI voltage domain ID
*/
struct scmi_voltd_config_get_in {
u32 domain_id;
};
/**
* struct scmi_voltd_config_get_out - Response for VOLTAGE_CONFIG_GET command
* @status: SCMI command status
* @config: Configuration data of the voltage domain
*/
struct scmi_voltd_config_get_out {
s32 status;
u32 config;
};
/**
* struct scmi_voltd_level_set_in - Message payload for VOLTAGE_LEVEL_SET cmd
* @domain_id: SCMI voltage domain ID
* @flags: Parameter flags for configuring target level
* @voltage_level: Target voltage level in microvolts (uV)
*/
struct scmi_voltd_level_set_in {
u32 domain_id;
u32 flags;
s32 voltage_level;
};
/**
* struct scmi_voltd_level_set_out - Response for VOLTAGE_LEVEL_SET command
* @status: SCMI command status
*/
struct scmi_voltd_level_set_out {
s32 status;
};
/**
* struct scmi_voltd_level_get_in - Message payload for VOLTAGE_LEVEL_GET cmd
* @domain_id: SCMI voltage domain ID
*/
struct scmi_voltd_level_get_in {
u32 domain_id;
};
/**
* struct scmi_voltd_level_get_out - Response for VOLTAGE_LEVEL_GET command
* @status: SCMI command status
* @voltage_level: Voltage level in microvolts (uV)
*/
struct scmi_voltd_level_get_out {
s32 status;
s32 voltage_level;
};
firmware: add SCMI agent uclass This change introduces SCMI agent uclass to interact with a firmware using the SCMI protocols [1]. SCMI agent uclass currently supports a single method to request processing of the SCMI message by an identified server. A SCMI message is made of a byte payload associated to a protocol ID and a message ID, all defined by the SCMI specification [1]. On return from process_msg() method, the caller gets the service response. SCMI agent uclass defines a post bind generic sequence for all devices. The sequence binds all the SCMI protocols listed in the FDT for that SCMI agent device. Currently none, but later change will introduce protocols. This change implements a simple sandbox device for the SCMI agent uclass. The sandbox nicely answers SCMI_NOT_SUPPORTED to SCMI messages. To prepare for further test support, the sandbox exposes a architecture function for test application to read the sandbox emulated devices state. Currently supports 2 SCMI agents, identified by an ID in the FDT device name. The simplistic DM test does nothing yet. SCMI agent uclass is designed for platforms that embed a SCMI server in a firmware hosted somewhere, for example in a companion co-processor or in the secure world of the executing processor. SCMI protocols allow an SCMI agent to discover and access external resources as clock, reset controllers and more. SCMI agent and server communicate following the SCMI specification [1]. This SCMI agent implementation complies with the DT bindings defined in the Linux kernel source tree regarding SCMI agent description since v5.8. Links: [1] https://developer.arm.com/architectures/system-architectures/software-standards/scmi Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Cc: Simon Glass <sjg@chromium.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-09 16:44:00 +00:00
#endif /* _SCMI_PROTOCOLS_H */