pinctrl: imx: Introduce pinctrl driver for i.MX6
Introduce pinctrl for i.MX6
1. pinctrl-imx.c is for common usage. It's used by i.MX6/7.
2. Add PINCTRL_IMX PINCTRL_IMX6 Kconfig entry.
3. To the pinctrl_ops implementation, only set_state is implemented.
To i.MX6/7, the pinctrl dts entry is as following:
&iomuxc {
pinctrl-names = "default";
pinctrl_csi1: csi1grp {
fsl,pins = <
MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1b088
MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x1b088
MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x1b088
>;
};
[.....]
};
there is no property named function or groups. So pinctrl_generic_set_state
can not be used here.
5. This driver is a simple implementation for i.mx iomux controller,
only parse the fsl,pins property and write value to registers.
6. With DEBUG enabled, we can see log when "i2c bus 0":
"
set_state_simple op missing
imx_pinctrl_set_state: i2c1grp
mux_reg 0x14c, conf_reg 0x3bc, input_reg 0x5d8, mux_mode 0x0, input_val 0x1, config_val 0x4000007f
write mux: offset 0x14c val 0x10
select_input: offset 0x5d8 val 0x1
write config: offset 0x3bc val 0x7f
mux_reg 0x148, conf_reg 0x3b8, input_reg 0x5d4, mux_mode 0x0, input_val 0x1, config_val 0x4000007f
write mux: offset 0x148 val 0x10
select_input: offset 0x5d4 val 0x1
write config: offset 0x3b8 val 0x7f
"
this means imx6 pinctrl driver works as expected.
Signed-off-by: Peng Fan <van.freenix@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-03 02:06:07 +00:00
|
|
|
/*
|
|
|
|
* Copyright (C) 2016 Peng Fan <van.freenix@gmail.com>
|
|
|
|
*
|
|
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <common.h>
|
|
|
|
#include <mapmem.h>
|
|
|
|
#include <linux/io.h>
|
|
|
|
#include <linux/err.h>
|
2017-05-17 23:18:03 +00:00
|
|
|
#include <dm.h>
|
pinctrl: imx: Introduce pinctrl driver for i.MX6
Introduce pinctrl for i.MX6
1. pinctrl-imx.c is for common usage. It's used by i.MX6/7.
2. Add PINCTRL_IMX PINCTRL_IMX6 Kconfig entry.
3. To the pinctrl_ops implementation, only set_state is implemented.
To i.MX6/7, the pinctrl dts entry is as following:
&iomuxc {
pinctrl-names = "default";
pinctrl_csi1: csi1grp {
fsl,pins = <
MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1b088
MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x1b088
MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x1b088
>;
};
[.....]
};
there is no property named function or groups. So pinctrl_generic_set_state
can not be used here.
5. This driver is a simple implementation for i.mx iomux controller,
only parse the fsl,pins property and write value to registers.
6. With DEBUG enabled, we can see log when "i2c bus 0":
"
set_state_simple op missing
imx_pinctrl_set_state: i2c1grp
mux_reg 0x14c, conf_reg 0x3bc, input_reg 0x5d8, mux_mode 0x0, input_val 0x1, config_val 0x4000007f
write mux: offset 0x14c val 0x10
select_input: offset 0x5d8 val 0x1
write config: offset 0x3bc val 0x7f
mux_reg 0x148, conf_reg 0x3b8, input_reg 0x5d4, mux_mode 0x0, input_val 0x1, config_val 0x4000007f
write mux: offset 0x148 val 0x10
select_input: offset 0x5d4 val 0x1
write config: offset 0x3b8 val 0x7f
"
this means imx6 pinctrl driver works as expected.
Signed-off-by: Peng Fan <van.freenix@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-03 02:06:07 +00:00
|
|
|
#include <dm/pinctrl.h>
|
|
|
|
|
|
|
|
#include "pinctrl-imx.h"
|
|
|
|
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
|
|
|
|
static int imx_pinctrl_set_state(struct udevice *dev, struct udevice *config)
|
|
|
|
{
|
|
|
|
struct imx_pinctrl_priv *priv = dev_get_priv(dev);
|
|
|
|
struct imx_pinctrl_soc_info *info = priv->info;
|
2017-01-17 23:52:55 +00:00
|
|
|
int node = dev_of_offset(config);
|
pinctrl: imx: Introduce pinctrl driver for i.MX6
Introduce pinctrl for i.MX6
1. pinctrl-imx.c is for common usage. It's used by i.MX6/7.
2. Add PINCTRL_IMX PINCTRL_IMX6 Kconfig entry.
3. To the pinctrl_ops implementation, only set_state is implemented.
To i.MX6/7, the pinctrl dts entry is as following:
&iomuxc {
pinctrl-names = "default";
pinctrl_csi1: csi1grp {
fsl,pins = <
MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1b088
MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x1b088
MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x1b088
>;
};
[.....]
};
there is no property named function or groups. So pinctrl_generic_set_state
can not be used here.
5. This driver is a simple implementation for i.mx iomux controller,
only parse the fsl,pins property and write value to registers.
6. With DEBUG enabled, we can see log when "i2c bus 0":
"
set_state_simple op missing
imx_pinctrl_set_state: i2c1grp
mux_reg 0x14c, conf_reg 0x3bc, input_reg 0x5d8, mux_mode 0x0, input_val 0x1, config_val 0x4000007f
write mux: offset 0x14c val 0x10
select_input: offset 0x5d8 val 0x1
write config: offset 0x3bc val 0x7f
mux_reg 0x148, conf_reg 0x3b8, input_reg 0x5d4, mux_mode 0x0, input_val 0x1, config_val 0x4000007f
write mux: offset 0x148 val 0x10
select_input: offset 0x5d4 val 0x1
write config: offset 0x3b8 val 0x7f
"
this means imx6 pinctrl driver works as expected.
Signed-off-by: Peng Fan <van.freenix@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-03 02:06:07 +00:00
|
|
|
const struct fdt_property *prop;
|
|
|
|
u32 *pin_data;
|
|
|
|
int npins, size, pin_size;
|
|
|
|
int mux_reg, conf_reg, input_reg, input_val, mux_mode, config_val;
|
2017-02-22 08:21:49 +00:00
|
|
|
u32 mux_shift = info->mux_mask ? ffs(info->mux_mask) - 1 : 0;
|
pinctrl: imx: Introduce pinctrl driver for i.MX6
Introduce pinctrl for i.MX6
1. pinctrl-imx.c is for common usage. It's used by i.MX6/7.
2. Add PINCTRL_IMX PINCTRL_IMX6 Kconfig entry.
3. To the pinctrl_ops implementation, only set_state is implemented.
To i.MX6/7, the pinctrl dts entry is as following:
&iomuxc {
pinctrl-names = "default";
pinctrl_csi1: csi1grp {
fsl,pins = <
MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1b088
MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x1b088
MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x1b088
>;
};
[.....]
};
there is no property named function or groups. So pinctrl_generic_set_state
can not be used here.
5. This driver is a simple implementation for i.mx iomux controller,
only parse the fsl,pins property and write value to registers.
6. With DEBUG enabled, we can see log when "i2c bus 0":
"
set_state_simple op missing
imx_pinctrl_set_state: i2c1grp
mux_reg 0x14c, conf_reg 0x3bc, input_reg 0x5d8, mux_mode 0x0, input_val 0x1, config_val 0x4000007f
write mux: offset 0x14c val 0x10
select_input: offset 0x5d8 val 0x1
write config: offset 0x3bc val 0x7f
mux_reg 0x148, conf_reg 0x3b8, input_reg 0x5d4, mux_mode 0x0, input_val 0x1, config_val 0x4000007f
write mux: offset 0x148 val 0x10
select_input: offset 0x5d4 val 0x1
write config: offset 0x3b8 val 0x7f
"
this means imx6 pinctrl driver works as expected.
Signed-off-by: Peng Fan <van.freenix@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-03 02:06:07 +00:00
|
|
|
int i, j = 0;
|
|
|
|
|
|
|
|
dev_dbg(dev, "%s: %s\n", __func__, config->name);
|
|
|
|
|
|
|
|
if (info->flags & SHARE_MUX_CONF_REG)
|
|
|
|
pin_size = SHARE_FSL_PIN_SIZE;
|
|
|
|
else
|
|
|
|
pin_size = FSL_PIN_SIZE;
|
|
|
|
|
|
|
|
prop = fdt_getprop(gd->fdt_blob, node, "fsl,pins", &size);
|
|
|
|
if (!prop) {
|
|
|
|
dev_err(dev, "No fsl,pins property in node %s\n", config->name);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!size || size % pin_size) {
|
|
|
|
dev_err(dev, "Invalid fsl,pins property in node %s\n",
|
|
|
|
config->name);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
pin_data = devm_kzalloc(dev, size, 0);
|
|
|
|
if (!pin_data)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
if (fdtdec_get_int_array(gd->fdt_blob, node, "fsl,pins",
|
|
|
|
pin_data, size >> 2)) {
|
|
|
|
dev_err(dev, "Error reading pin data.\n");
|
2017-05-11 09:34:14 +00:00
|
|
|
devm_kfree(dev, pin_data);
|
pinctrl: imx: Introduce pinctrl driver for i.MX6
Introduce pinctrl for i.MX6
1. pinctrl-imx.c is for common usage. It's used by i.MX6/7.
2. Add PINCTRL_IMX PINCTRL_IMX6 Kconfig entry.
3. To the pinctrl_ops implementation, only set_state is implemented.
To i.MX6/7, the pinctrl dts entry is as following:
&iomuxc {
pinctrl-names = "default";
pinctrl_csi1: csi1grp {
fsl,pins = <
MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1b088
MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x1b088
MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x1b088
>;
};
[.....]
};
there is no property named function or groups. So pinctrl_generic_set_state
can not be used here.
5. This driver is a simple implementation for i.mx iomux controller,
only parse the fsl,pins property and write value to registers.
6. With DEBUG enabled, we can see log when "i2c bus 0":
"
set_state_simple op missing
imx_pinctrl_set_state: i2c1grp
mux_reg 0x14c, conf_reg 0x3bc, input_reg 0x5d8, mux_mode 0x0, input_val 0x1, config_val 0x4000007f
write mux: offset 0x14c val 0x10
select_input: offset 0x5d8 val 0x1
write config: offset 0x3bc val 0x7f
mux_reg 0x148, conf_reg 0x3b8, input_reg 0x5d4, mux_mode 0x0, input_val 0x1, config_val 0x4000007f
write mux: offset 0x148 val 0x10
select_input: offset 0x5d4 val 0x1
write config: offset 0x3b8 val 0x7f
"
this means imx6 pinctrl driver works as expected.
Signed-off-by: Peng Fan <van.freenix@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-03 02:06:07 +00:00
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
npins = size / pin_size;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Refer to linux documentation for details:
|
|
|
|
* Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt
|
|
|
|
*/
|
|
|
|
for (i = 0; i < npins; i++) {
|
|
|
|
mux_reg = pin_data[j++];
|
|
|
|
|
|
|
|
if (!(info->flags & ZERO_OFFSET_VALID) && !mux_reg)
|
|
|
|
mux_reg = -1;
|
|
|
|
|
|
|
|
if (info->flags & SHARE_MUX_CONF_REG) {
|
|
|
|
conf_reg = mux_reg;
|
|
|
|
} else {
|
|
|
|
conf_reg = pin_data[j++];
|
|
|
|
if (!(info->flags & ZERO_OFFSET_VALID) && !conf_reg)
|
|
|
|
conf_reg = -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((mux_reg == -1) || (conf_reg == -1)) {
|
|
|
|
dev_err(dev, "Error mux_reg or conf_reg\n");
|
2017-05-11 09:34:14 +00:00
|
|
|
devm_kfree(dev, pin_data);
|
pinctrl: imx: Introduce pinctrl driver for i.MX6
Introduce pinctrl for i.MX6
1. pinctrl-imx.c is for common usage. It's used by i.MX6/7.
2. Add PINCTRL_IMX PINCTRL_IMX6 Kconfig entry.
3. To the pinctrl_ops implementation, only set_state is implemented.
To i.MX6/7, the pinctrl dts entry is as following:
&iomuxc {
pinctrl-names = "default";
pinctrl_csi1: csi1grp {
fsl,pins = <
MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1b088
MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x1b088
MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x1b088
>;
};
[.....]
};
there is no property named function or groups. So pinctrl_generic_set_state
can not be used here.
5. This driver is a simple implementation for i.mx iomux controller,
only parse the fsl,pins property and write value to registers.
6. With DEBUG enabled, we can see log when "i2c bus 0":
"
set_state_simple op missing
imx_pinctrl_set_state: i2c1grp
mux_reg 0x14c, conf_reg 0x3bc, input_reg 0x5d8, mux_mode 0x0, input_val 0x1, config_val 0x4000007f
write mux: offset 0x14c val 0x10
select_input: offset 0x5d8 val 0x1
write config: offset 0x3bc val 0x7f
mux_reg 0x148, conf_reg 0x3b8, input_reg 0x5d4, mux_mode 0x0, input_val 0x1, config_val 0x4000007f
write mux: offset 0x148 val 0x10
select_input: offset 0x5d4 val 0x1
write config: offset 0x3b8 val 0x7f
"
this means imx6 pinctrl driver works as expected.
Signed-off-by: Peng Fan <van.freenix@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-03 02:06:07 +00:00
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
input_reg = pin_data[j++];
|
|
|
|
mux_mode = pin_data[j++];
|
|
|
|
input_val = pin_data[j++];
|
|
|
|
config_val = pin_data[j++];
|
|
|
|
|
|
|
|
dev_dbg(dev, "mux_reg 0x%x, conf_reg 0x%x, input_reg 0x%x, "
|
|
|
|
"mux_mode 0x%x, input_val 0x%x, config_val 0x%x\n",
|
|
|
|
mux_reg, conf_reg, input_reg, mux_mode, input_val,
|
|
|
|
config_val);
|
|
|
|
|
|
|
|
if (config_val & IMX_PAD_SION)
|
|
|
|
mux_mode |= IOMUXC_CONFIG_SION;
|
|
|
|
|
|
|
|
config_val &= ~IMX_PAD_SION;
|
|
|
|
|
|
|
|
/* Set Mux */
|
|
|
|
if (info->flags & SHARE_MUX_CONF_REG) {
|
2017-02-22 08:21:49 +00:00
|
|
|
clrsetbits_le32(info->base + mux_reg, info->mux_mask,
|
|
|
|
mux_mode << mux_shift);
|
pinctrl: imx: Introduce pinctrl driver for i.MX6
Introduce pinctrl for i.MX6
1. pinctrl-imx.c is for common usage. It's used by i.MX6/7.
2. Add PINCTRL_IMX PINCTRL_IMX6 Kconfig entry.
3. To the pinctrl_ops implementation, only set_state is implemented.
To i.MX6/7, the pinctrl dts entry is as following:
&iomuxc {
pinctrl-names = "default";
pinctrl_csi1: csi1grp {
fsl,pins = <
MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1b088
MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x1b088
MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x1b088
>;
};
[.....]
};
there is no property named function or groups. So pinctrl_generic_set_state
can not be used here.
5. This driver is a simple implementation for i.mx iomux controller,
only parse the fsl,pins property and write value to registers.
6. With DEBUG enabled, we can see log when "i2c bus 0":
"
set_state_simple op missing
imx_pinctrl_set_state: i2c1grp
mux_reg 0x14c, conf_reg 0x3bc, input_reg 0x5d8, mux_mode 0x0, input_val 0x1, config_val 0x4000007f
write mux: offset 0x14c val 0x10
select_input: offset 0x5d8 val 0x1
write config: offset 0x3bc val 0x7f
mux_reg 0x148, conf_reg 0x3b8, input_reg 0x5d4, mux_mode 0x0, input_val 0x1, config_val 0x4000007f
write mux: offset 0x148 val 0x10
select_input: offset 0x5d4 val 0x1
write config: offset 0x3b8 val 0x7f
"
this means imx6 pinctrl driver works as expected.
Signed-off-by: Peng Fan <van.freenix@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-03 02:06:07 +00:00
|
|
|
} else {
|
|
|
|
writel(mux_mode, info->base + mux_reg);
|
|
|
|
}
|
|
|
|
|
|
|
|
dev_dbg(dev, "write mux: offset 0x%x val 0x%x\n", mux_reg,
|
|
|
|
mux_mode);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Set select input
|
|
|
|
*
|
|
|
|
* If the select input value begins with 0xff, it's a quirky
|
|
|
|
* select input and the value should be interpreted as below.
|
|
|
|
* 31 23 15 7 0
|
|
|
|
* | 0xff | shift | width | select |
|
|
|
|
* It's used to work around the problem that the select
|
|
|
|
* input for some pin is not implemented in the select
|
|
|
|
* input register but in some general purpose register.
|
|
|
|
* We encode the select input value, width and shift of
|
|
|
|
* the bit field into input_val cell of pin function ID
|
|
|
|
* in device tree, and then decode them here for setting
|
|
|
|
* up the select input bits in general purpose register.
|
|
|
|
*/
|
|
|
|
|
|
|
|
if (input_val >> 24 == 0xff) {
|
|
|
|
u32 val = input_val;
|
|
|
|
u8 select = val & 0xff;
|
|
|
|
u8 width = (val >> 8) & 0xff;
|
|
|
|
u8 shift = (val >> 16) & 0xff;
|
|
|
|
u32 mask = ((1 << width) - 1) << shift;
|
|
|
|
/*
|
|
|
|
* The input_reg[i] here is actually some IOMUXC general
|
|
|
|
* purpose register, not regular select input register.
|
|
|
|
*/
|
|
|
|
val = readl(info->base + input_reg);
|
|
|
|
val &= ~mask;
|
|
|
|
val |= select << shift;
|
|
|
|
writel(val, info->base + input_reg);
|
|
|
|
} else if (input_reg) {
|
|
|
|
/*
|
|
|
|
* Regular select input register can never be at offset
|
|
|
|
* 0, and we only print register value for regular case.
|
|
|
|
*/
|
|
|
|
if (info->input_sel_base)
|
|
|
|
writel(input_val, info->input_sel_base +
|
|
|
|
input_reg);
|
|
|
|
else
|
|
|
|
writel(input_val, info->base + input_reg);
|
|
|
|
|
|
|
|
dev_dbg(dev, "select_input: offset 0x%x val 0x%x\n",
|
|
|
|
input_reg, input_val);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Set config */
|
|
|
|
if (!(config_val & IMX_NO_PAD_CTL)) {
|
|
|
|
if (info->flags & SHARE_MUX_CONF_REG) {
|
2017-02-22 08:21:49 +00:00
|
|
|
clrsetbits_le32(info->base + conf_reg,
|
2017-08-14 10:09:16 +00:00
|
|
|
~info->mux_mask, config_val);
|
pinctrl: imx: Introduce pinctrl driver for i.MX6
Introduce pinctrl for i.MX6
1. pinctrl-imx.c is for common usage. It's used by i.MX6/7.
2. Add PINCTRL_IMX PINCTRL_IMX6 Kconfig entry.
3. To the pinctrl_ops implementation, only set_state is implemented.
To i.MX6/7, the pinctrl dts entry is as following:
&iomuxc {
pinctrl-names = "default";
pinctrl_csi1: csi1grp {
fsl,pins = <
MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1b088
MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x1b088
MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x1b088
>;
};
[.....]
};
there is no property named function or groups. So pinctrl_generic_set_state
can not be used here.
5. This driver is a simple implementation for i.mx iomux controller,
only parse the fsl,pins property and write value to registers.
6. With DEBUG enabled, we can see log when "i2c bus 0":
"
set_state_simple op missing
imx_pinctrl_set_state: i2c1grp
mux_reg 0x14c, conf_reg 0x3bc, input_reg 0x5d8, mux_mode 0x0, input_val 0x1, config_val 0x4000007f
write mux: offset 0x14c val 0x10
select_input: offset 0x5d8 val 0x1
write config: offset 0x3bc val 0x7f
mux_reg 0x148, conf_reg 0x3b8, input_reg 0x5d4, mux_mode 0x0, input_val 0x1, config_val 0x4000007f
write mux: offset 0x148 val 0x10
select_input: offset 0x5d4 val 0x1
write config: offset 0x3b8 val 0x7f
"
this means imx6 pinctrl driver works as expected.
Signed-off-by: Peng Fan <van.freenix@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-03 02:06:07 +00:00
|
|
|
} else {
|
|
|
|
writel(config_val, info->base + conf_reg);
|
|
|
|
}
|
|
|
|
|
|
|
|
dev_dbg(dev, "write config: offset 0x%x val 0x%x\n",
|
|
|
|
conf_reg, config_val);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2017-05-11 09:34:14 +00:00
|
|
|
devm_kfree(dev, pin_data);
|
|
|
|
|
pinctrl: imx: Introduce pinctrl driver for i.MX6
Introduce pinctrl for i.MX6
1. pinctrl-imx.c is for common usage. It's used by i.MX6/7.
2. Add PINCTRL_IMX PINCTRL_IMX6 Kconfig entry.
3. To the pinctrl_ops implementation, only set_state is implemented.
To i.MX6/7, the pinctrl dts entry is as following:
&iomuxc {
pinctrl-names = "default";
pinctrl_csi1: csi1grp {
fsl,pins = <
MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1b088
MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x1b088
MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x1b088
>;
};
[.....]
};
there is no property named function or groups. So pinctrl_generic_set_state
can not be used here.
5. This driver is a simple implementation for i.mx iomux controller,
only parse the fsl,pins property and write value to registers.
6. With DEBUG enabled, we can see log when "i2c bus 0":
"
set_state_simple op missing
imx_pinctrl_set_state: i2c1grp
mux_reg 0x14c, conf_reg 0x3bc, input_reg 0x5d8, mux_mode 0x0, input_val 0x1, config_val 0x4000007f
write mux: offset 0x14c val 0x10
select_input: offset 0x5d8 val 0x1
write config: offset 0x3bc val 0x7f
mux_reg 0x148, conf_reg 0x3b8, input_reg 0x5d4, mux_mode 0x0, input_val 0x1, config_val 0x4000007f
write mux: offset 0x148 val 0x10
select_input: offset 0x5d4 val 0x1
write config: offset 0x3b8 val 0x7f
"
this means imx6 pinctrl driver works as expected.
Signed-off-by: Peng Fan <van.freenix@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-03 02:06:07 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
const struct pinctrl_ops imx_pinctrl_ops = {
|
|
|
|
.set_state = imx_pinctrl_set_state,
|
|
|
|
};
|
|
|
|
|
|
|
|
int imx_pinctrl_probe(struct udevice *dev,
|
|
|
|
struct imx_pinctrl_soc_info *info)
|
|
|
|
{
|
|
|
|
struct imx_pinctrl_priv *priv = dev_get_priv(dev);
|
2017-01-17 23:52:55 +00:00
|
|
|
int node = dev_of_offset(dev), ret;
|
pinctrl: imx: Introduce pinctrl driver for i.MX6
Introduce pinctrl for i.MX6
1. pinctrl-imx.c is for common usage. It's used by i.MX6/7.
2. Add PINCTRL_IMX PINCTRL_IMX6 Kconfig entry.
3. To the pinctrl_ops implementation, only set_state is implemented.
To i.MX6/7, the pinctrl dts entry is as following:
&iomuxc {
pinctrl-names = "default";
pinctrl_csi1: csi1grp {
fsl,pins = <
MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1b088
MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x1b088
MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x1b088
>;
};
[.....]
};
there is no property named function or groups. So pinctrl_generic_set_state
can not be used here.
5. This driver is a simple implementation for i.mx iomux controller,
only parse the fsl,pins property and write value to registers.
6. With DEBUG enabled, we can see log when "i2c bus 0":
"
set_state_simple op missing
imx_pinctrl_set_state: i2c1grp
mux_reg 0x14c, conf_reg 0x3bc, input_reg 0x5d8, mux_mode 0x0, input_val 0x1, config_val 0x4000007f
write mux: offset 0x14c val 0x10
select_input: offset 0x5d8 val 0x1
write config: offset 0x3bc val 0x7f
mux_reg 0x148, conf_reg 0x3b8, input_reg 0x5d4, mux_mode 0x0, input_val 0x1, config_val 0x4000007f
write mux: offset 0x148 val 0x10
select_input: offset 0x5d4 val 0x1
write config: offset 0x3b8 val 0x7f
"
this means imx6 pinctrl driver works as expected.
Signed-off-by: Peng Fan <van.freenix@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-03 02:06:07 +00:00
|
|
|
struct fdtdec_phandle_args arg;
|
|
|
|
fdt_addr_t addr;
|
|
|
|
fdt_size_t size;
|
|
|
|
|
|
|
|
if (!info) {
|
|
|
|
dev_err(dev, "wrong pinctrl info\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
priv->dev = dev;
|
|
|
|
priv->info = info;
|
|
|
|
|
2017-01-17 23:52:55 +00:00
|
|
|
addr = fdtdec_get_addr_size(gd->fdt_blob, dev_of_offset(dev), "reg",
|
|
|
|
&size);
|
pinctrl: imx: Introduce pinctrl driver for i.MX6
Introduce pinctrl for i.MX6
1. pinctrl-imx.c is for common usage. It's used by i.MX6/7.
2. Add PINCTRL_IMX PINCTRL_IMX6 Kconfig entry.
3. To the pinctrl_ops implementation, only set_state is implemented.
To i.MX6/7, the pinctrl dts entry is as following:
&iomuxc {
pinctrl-names = "default";
pinctrl_csi1: csi1grp {
fsl,pins = <
MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1b088
MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x1b088
MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x1b088
>;
};
[.....]
};
there is no property named function or groups. So pinctrl_generic_set_state
can not be used here.
5. This driver is a simple implementation for i.mx iomux controller,
only parse the fsl,pins property and write value to registers.
6. With DEBUG enabled, we can see log when "i2c bus 0":
"
set_state_simple op missing
imx_pinctrl_set_state: i2c1grp
mux_reg 0x14c, conf_reg 0x3bc, input_reg 0x5d8, mux_mode 0x0, input_val 0x1, config_val 0x4000007f
write mux: offset 0x14c val 0x10
select_input: offset 0x5d8 val 0x1
write config: offset 0x3bc val 0x7f
mux_reg 0x148, conf_reg 0x3b8, input_reg 0x5d4, mux_mode 0x0, input_val 0x1, config_val 0x4000007f
write mux: offset 0x148 val 0x10
select_input: offset 0x5d4 val 0x1
write config: offset 0x3b8 val 0x7f
"
this means imx6 pinctrl driver works as expected.
Signed-off-by: Peng Fan <van.freenix@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-03 02:06:07 +00:00
|
|
|
|
|
|
|
if (addr == FDT_ADDR_T_NONE)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
info->base = map_sysmem(addr, size);
|
|
|
|
if (!info->base)
|
|
|
|
return -ENOMEM;
|
|
|
|
priv->info = info;
|
|
|
|
|
2017-02-22 08:21:49 +00:00
|
|
|
info->mux_mask = fdtdec_get_int(gd->fdt_blob, node, "fsl,mux_mask", 0);
|
pinctrl: imx: Introduce pinctrl driver for i.MX6
Introduce pinctrl for i.MX6
1. pinctrl-imx.c is for common usage. It's used by i.MX6/7.
2. Add PINCTRL_IMX PINCTRL_IMX6 Kconfig entry.
3. To the pinctrl_ops implementation, only set_state is implemented.
To i.MX6/7, the pinctrl dts entry is as following:
&iomuxc {
pinctrl-names = "default";
pinctrl_csi1: csi1grp {
fsl,pins = <
MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1b088
MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x1b088
MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x1b088
>;
};
[.....]
};
there is no property named function or groups. So pinctrl_generic_set_state
can not be used here.
5. This driver is a simple implementation for i.mx iomux controller,
only parse the fsl,pins property and write value to registers.
6. With DEBUG enabled, we can see log when "i2c bus 0":
"
set_state_simple op missing
imx_pinctrl_set_state: i2c1grp
mux_reg 0x14c, conf_reg 0x3bc, input_reg 0x5d8, mux_mode 0x0, input_val 0x1, config_val 0x4000007f
write mux: offset 0x14c val 0x10
select_input: offset 0x5d8 val 0x1
write config: offset 0x3bc val 0x7f
mux_reg 0x148, conf_reg 0x3b8, input_reg 0x5d4, mux_mode 0x0, input_val 0x1, config_val 0x4000007f
write mux: offset 0x148 val 0x10
select_input: offset 0x5d4 val 0x1
write config: offset 0x3b8 val 0x7f
"
this means imx6 pinctrl driver works as expected.
Signed-off-by: Peng Fan <van.freenix@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-03 02:06:07 +00:00
|
|
|
/*
|
|
|
|
* Refer to linux documentation for details:
|
|
|
|
* Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
|
|
|
|
*/
|
|
|
|
if (fdtdec_get_bool(gd->fdt_blob, node, "fsl,input-sel")) {
|
|
|
|
ret = fdtdec_parse_phandle_with_args(gd->fdt_blob,
|
|
|
|
node, "fsl,input-sel",
|
|
|
|
NULL, 0, 0, &arg);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(dev, "iomuxc fsl,input-sel property not found\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
addr = fdtdec_get_addr_size(gd->fdt_blob, arg.node, "reg",
|
|
|
|
&size);
|
|
|
|
if (addr == FDT_ADDR_T_NONE)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
info->input_sel_base = map_sysmem(addr, size);
|
|
|
|
if (!info->input_sel_base)
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
2016-10-05 22:27:04 +00:00
|
|
|
dev_dbg(dev, "initialized IMX pinctrl driver\n");
|
pinctrl: imx: Introduce pinctrl driver for i.MX6
Introduce pinctrl for i.MX6
1. pinctrl-imx.c is for common usage. It's used by i.MX6/7.
2. Add PINCTRL_IMX PINCTRL_IMX6 Kconfig entry.
3. To the pinctrl_ops implementation, only set_state is implemented.
To i.MX6/7, the pinctrl dts entry is as following:
&iomuxc {
pinctrl-names = "default";
pinctrl_csi1: csi1grp {
fsl,pins = <
MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1b088
MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x1b088
MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x1b088
>;
};
[.....]
};
there is no property named function or groups. So pinctrl_generic_set_state
can not be used here.
5. This driver is a simple implementation for i.mx iomux controller,
only parse the fsl,pins property and write value to registers.
6. With DEBUG enabled, we can see log when "i2c bus 0":
"
set_state_simple op missing
imx_pinctrl_set_state: i2c1grp
mux_reg 0x14c, conf_reg 0x3bc, input_reg 0x5d8, mux_mode 0x0, input_val 0x1, config_val 0x4000007f
write mux: offset 0x14c val 0x10
select_input: offset 0x5d8 val 0x1
write config: offset 0x3bc val 0x7f
mux_reg 0x148, conf_reg 0x3b8, input_reg 0x5d4, mux_mode 0x0, input_val 0x1, config_val 0x4000007f
write mux: offset 0x148 val 0x10
select_input: offset 0x5d4 val 0x1
write config: offset 0x3b8 val 0x7f
"
this means imx6 pinctrl driver works as expected.
Signed-off-by: Peng Fan <van.freenix@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-03 02:06:07 +00:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int imx_pinctrl_remove(struct udevice *dev)
|
|
|
|
{
|
|
|
|
struct imx_pinctrl_priv *priv = dev_get_priv(dev);
|
|
|
|
struct imx_pinctrl_soc_info *info = priv->info;
|
|
|
|
|
|
|
|
if (info->input_sel_base)
|
|
|
|
unmap_sysmem(info->input_sel_base);
|
|
|
|
if (info->base)
|
|
|
|
unmap_sysmem(info->base);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|