Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-08 14:14:32 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/arm/mach-keystone/include/mach/ddr3.h

85 lines
1.9 KiB
C
Raw Normal View History

SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-06 21:58:06 +00:00
/* SPDX-License-Identifier: GPL-2.0+ */
keystone: ddr3: add ddr3.h to hold ddr3 API It's convinient to hold ddr3 function definitions in separate file such as ddr3.h. So move this from hardware.h to ddr3.h. Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
2014-07-09 16:48:40 +00:00
/*
* DDR3
*
* (C) Copyright 2014
* Texas Instruments Incorporated, <www.ti.com>
*/
#ifndef _DDR3_H_
#define _DDR3_H_
#include <asm/arch/hardware.h>
struct ddr3_phy_config {
unsigned int pllcr;
unsigned int pgcr1_mask;
unsigned int pgcr1_val;
unsigned int ptr0;
unsigned int ptr1;
unsigned int ptr2;
unsigned int ptr3;
unsigned int ptr4;
unsigned int dcr_mask;
unsigned int dcr_val;
unsigned int dtpr0;
unsigned int dtpr1;
unsigned int dtpr2;
unsigned int mr0;
unsigned int mr1;
unsigned int mr2;
unsigned int dtcr;
unsigned int pgcr2;
unsigned int zq0cr1;
unsigned int zq1cr1;
unsigned int zq2cr1;
unsigned int pir_v1;
ARM: keystone2: Add additional fields used for DDR3 configuration Future boards will need to configure DDR3 registers in a slightly different manner. Support this by defining additional variables and defines that will be utilized later. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-16 22:25:19 +00:00
unsigned int datx8_2_mask;
unsigned int datx8_2_val;
unsigned int datx8_3_mask;
unsigned int datx8_3_val;
unsigned int datx8_4_mask;
unsigned int datx8_4_val;
unsigned int datx8_5_mask;
unsigned int datx8_5_val;
unsigned int datx8_6_mask;
unsigned int datx8_6_val;
unsigned int datx8_7_mask;
unsigned int datx8_7_val;
unsigned int datx8_8_mask;
unsigned int datx8_8_val;
keystone: ddr3: add ddr3.h to hold ddr3 API It's convinient to hold ddr3 function definitions in separate file such as ddr3.h. So move this from hardware.h to ddr3.h. Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
2014-07-09 16:48:40 +00:00
unsigned int pir_v2;
};
struct ddr3_emif_config {
unsigned int sdcfg;
unsigned int sdtim1;
unsigned int sdtim2;
unsigned int sdtim3;
unsigned int sdtim4;
unsigned int zqcfg;
unsigned int sdrfc;
};
ARM: keystone2: use SPD info to configure K2HK and K2E DDR3 This commit replaces hard-coded EMIF and PHY DDR3 configurations for predefined SODIMMs to a calculated configuration. The SODIMM parameters are read from SODIMM's SPD and used to calculated the configuration. The current commit supports calculation for DDR3 with 1600MHz and 1333MHz only. Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-04 16:36:42 +00:00
struct ddr3_spd_cb {
char dimm_name[32];
struct ddr3_phy_config phy_cfg;
struct ddr3_emif_config emif_cfg;
unsigned int ddrspdclock;
int ddr_size_gbyte;
};
keystone2: ddr3: eliminate using global ddr3_size variable KS2 ddr3 initialization uses ddr3_size global variable before u-boot relocation. Even if the variable is not being used after relocation, writing to it corrupts relocation table. This patch removes the global ddr3_size variable and uses local one instead. Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Tested-by: Nishanth Menon <nm@ti.com>
2015-02-11 19:07:58 +00:00
u32 ddr3_init(void);
keystone2: ddr: add DDR3 PHY configs updated for PG 2.0 Add DDR3 PHY configs updated for PG 2.0 Also add DDR3A PHY reset before init for PG2.0 SoCs. Acked-by: Murali Karicheri <m-maricheri2@ti.com> Signed-off-by: Hao Zhang <hzhang@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
2014-07-09 16:48:41 +00:00
void ddr3_reset_ddrphy(void);
keystone2: ddr3: eliminate using global ddr3_size variable KS2 ddr3 initialization uses ddr3_size global variable before u-boot relocation. Even if the variable is not being used after relocation, writing to it corrupts relocation table. This patch removes the global ddr3_size variable and uses local one instead. Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Tested-by: Nishanth Menon <nm@ti.com>
2015-02-11 19:07:58 +00:00
void ddr3_init_ecc(u32 base, u32 ddr3_size);
keystone2: ecc: add ddr3 error detection and correction support This patch adds the DDR3 ECC support to enable ECC in the DDR3 EMIF controller for Keystone II devices. By default, ECC will only be enabled if RMW is supported in the DDR EMIF controller. The entire DDR memory will be scrubbed to zero using an EDMA channel after ECC is enabled and before u-boot is re-located to DDR memory. An ecc_test environment variable is added for ECC testing. If ecc_test is set to 0, a detection of 2-bit error will reset the device, if ecc_test is set to 1, 2-bit error detection will not reset the device, user can still boot the kernel to check the ECC error handling in kernel. Signed-off-by: Hao Zhang <hzhang@ti.com> Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
2014-10-22 14:47:58 +00:00
void ddr3_disable_ecc(u32 base);
void ddr3_check_ecc_int(u32 base);
int ddr3_ecc_support_rmw(u32 base);
ARM: keystone: ddr3: workaround for ddr3a/3b memory issue This patch implements a workaround to fix DDR3 memory issue. The code for workaround detects PGSR0 errors and then preps for and executes a software-controlled hard reset.In board_early_init, where logic has been added to identify whether or not the previous reset was a PORz. PLL initialization is skipped in the case of a software-controlled hard reset. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Keegan Garcia <kgarcia@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
2014-09-10 12:54:59 +00:00
void ddr3_err_reset_workaround(void);
keystone2: ecc: add ddr3 error detection and correction support This patch adds the DDR3 ECC support to enable ECC in the DDR3 EMIF controller for Keystone II devices. By default, ECC will only be enabled if RMW is supported in the DDR EMIF controller. The entire DDR memory will be scrubbed to zero using an EDMA channel after ECC is enabled and before u-boot is re-located to DDR memory. An ecc_test environment variable is added for ECC testing. If ecc_test is set to 0, a detection of 2-bit error will reset the device, if ecc_test is set to 1, 2-bit error detection will not reset the device, user can still boot the kernel to check the ECC error handling in kernel. Signed-off-by: Hao Zhang <hzhang@ti.com> Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
2014-10-22 14:47:58 +00:00
void ddr3_enable_ecc(u32 base, int test);
keystone: ddr3: add ddr3.h to hold ddr3 API It's convinient to hold ddr3 function definitions in separate file such as ddr3.h. So move this from hardware.h to ddr3.h. Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
2014-07-09 16:48:40 +00:00
void ddr3_init_ddrphy(u32 base, struct ddr3_phy_config *phy_cfg);
void ddr3_init_ddremif(u32 base, struct ddr3_emif_config *emif_cfg);
ARM: keystone2: use detected ddr3a size Because KS2 u-boot works in 32 bit address space the existing ram_size global data field cannot be used. The maximum, which the get_ram_size() can detect is 2GB only. The ft_board_setup() needs the actual ddr3 size to fix up dtb. This commit introduces the ddr3_get_size() which uses SPD data to calculate the ddr3 size. This function replaces the "ddr3_size" environment variable, which was used to get the SODIMM size. For platforms, which don't have SODIMM with SPD and ddr3 is populated to a board a simple ddr3_get_size function that returns ddr3 size has to be implemented. See hardware-k2l.h Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-04 16:36:43 +00:00
int ddr3_get_size(void);
keystone: ddr3: add ddr3.h to hold ddr3 API It's convinient to hold ddr3 function definitions in separate file such as ddr3.h. So move this from hardware.h to ddr3.h. Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
2014-07-09 16:48:40 +00:00
#endif
Reference in a new issue Copy permalink