Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-14 17:07:38 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/configs/omapl138_lcdk_defconfig

71 lines
1.7 KiB
Text
Raw Normal View History

davinci: add support for omapl138-lcdk board Signed-off-by: Peter Howard <phoward@gme.net.au> [trini: Add config file, update for ..._ether_addr() -> ..._ethaddr() rename] Signed-off-by: Tom Rini <trini@konsulko.com>
2015-03-22 22:19:56 +00:00
CONFIG_ARM=y
CONFIG_ARCH_DAVINCI=y
configs: Migrate CONFIG_SYS_TEXT_BASE On the NIOS2 and Xtensa architectures, we do not have CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current values into the defconfig and removing them from the headers. I did not attempt to add more default values in and for now will leave that to maintainers. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-03 17:10:38 +00:00
CONFIG_SYS_TEXT_BASE=0xc1080000
davinci: add support for omapl138-lcdk board Signed-off-by: Peter Howard <phoward@gme.net.au> [trini: Add config file, update for ..._ether_addr() -> ..._ethaddr() rename] Signed-off-by: Tom Rini <trini@konsulko.com>
2015-03-22 22:19:56 +00:00
CONFIG_TARGET_OMAPL138_LCDK=y
davinci: omapl138_lcdk: fix PLL0 frequency commit 1601dd97edc6 ("davinci: omapl138_lcdk: increase PLL0 frequency") changed the PLL0 frequency to 456MHz, which is needed for the LCDC IP block. However, in doing so, it caused the PLLOUT clock to be outside of the allowable specifications given in the OMAP-L138 data sheet. (It says PLLOUT must be 600MHz max). It also uses a PLLM value outside of the range given in the TRM (it says PLLM must in the range 0 to 0x1f). So here is what we have currently: PLLOUT = 24 / (0 + 1) * (37 + 1) = 912MHz (out of spec) ^ ^ ^ CLKIN PREDIV PLLM (out of spec) input to PLLDIVn = 912 / (1 + 1) = 456MHz (desired result) ^ ^ PLLOUT POSTDIV This changes the PLLM value to 18 and the POSTDIV value to 0 so that PLLOUT is now within specification but we still get the desired result. PLLOUT = 24 / (0 + 1) * (18 + 1) = 456MHz (within spec) ^ ^ ^ CLKIN PREDIV PLLM input to PLLDIVn = 456 / (0 + 1) = 456MHz (desired result) ^ ^ PLLOUT POSTDIV Fixes: 1601dd97edc6 ("davinci: omapl138_lcdk: increase PLL0 frequency") Signed-off-by: David Lechner <david@lechnology.com> Reported-by: Sekhar Nori <nsekhar@ti.com> Tested-by: Sekhar Nori <nsekhar@ti.com>
2018-03-15 01:36:30 +00:00
CONFIG_SYS_DA850_PLL0_POSTDIV=0
Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig This converts the following to Kconfig: CONFIG_SYS_DV_CLKMODE CONFIG_SYS_DA850_PLL0_POSTDIV CONFIG_SYS_DA850_PLL0_PLLDIV1 CONFIG_SYS_DA850_PLL0_PLLDIV2 CONFIG_SYS_DA850_PLL0_PLLDIV3 CONFIG_SYS_DA850_PLL0_PLLDIV4 CONFIG_SYS_DA850_PLL0_PLLDIV5 CONFIG_SYS_DA850_PLL0_PLLDIV6 CONFIG_SYS_DA850_PLL0_PLLDIV7 CONFIG_SYS_DA850_PLL1_POSTDIV CONFIG_SYS_DA850_PLL1_PLLDIV1 CONFIG_SYS_DA850_PLL1_PLLDIV2 CONFIG_SYS_DA850_PLL1_PLLDIV3 Signed-off-by: Adam Ford <aford173@gmail.com>
2018-01-23 10:04:28 +00:00
CONFIG_SYS_DA850_PLL1_PLLDIV3=0x8003
davinci: omapl138_lcdk: switch to using TI_COMMON_CMD_OPTIONS Now that we support using TI_COMMON_CMD_OPTIONS, we dont have to enable a number of commands explicitly in the defconfig if we enable TI_COMMON_CMD_OPTIONS. Enable TI_COMMON_CMD_OPTIONS and regenerate the defconfig using "make savedefconfig". CMD_GPIO has been kept disabled because there is no GPIO support (yet) on OMAP-L138 LCDK. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-05-11 14:44:22 +00:00
CONFIG_TI_COMMON_CMD_OPTIONS=y
Convert CONFIG_SPL_LIBCOMMON_SUPPORT to Kconfig Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 05:18:41 +00:00
CONFIG_SPL_LIBCOMMON_SUPPORT=y
Convert CONFIG_SPL_LIBGENERIC_SUPPORT to Kconfig Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 05:18:43 +00:00
CONFIG_SPL_LIBGENERIC_SUPPORT=y
omapl138_lcdk: enable SPL MMC support Enable SPL MMC support in order to allow to build a single u-boot image that is able to boot from MMC and NAND devices. Signed-off-by: Fabien Parent <fparent@baylibre.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-01-09 10:06:37 +00:00
CONFIG_SPL_MMC_SUPPORT=y
Convert CONFIG_SPL_SERIAL_SUPPORT to Kconfig Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 05:18:56 +00:00
CONFIG_SPL_SERIAL_SUPPORT=y
configs: Migrate CONFIG_NR_DRAM_BANKS We have the following cases: - CONFIG_NR_DRAM_BANKS was defined, migrate normally - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for CONFIG_NR_DRAM_BANKS after a check, just migrate it over now. - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 + 2), set this to 8. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-08-16 12:16:24 +00:00
CONFIG_NR_DRAM_BANKS=1
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-29 19:54:04 +00:00
CONFIG_SPL=y
common: bootdelay: move CONFIG_BOOTDELAY into a Kconfig option move CONFIG_BOOTDELAY into a Kconfig option. Used for this purpose the moveconfig.py tool in tools. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2016-06-07 06:31:14 +00:00
CONFIG_BOOTDELAY=3
configs: omapl138_lcdk: decrease the loglevel to reduce the size of the SPL The changes in the MMC stack have increased its footprint up to the point were its breaks the generation of the SPL for this platform. Fix this by reducing the loglevel. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Peter Howard <phoward@gme.net.au>
2017-11-30 16:44:04 +00:00
CONFIG_LOGLEVEL=3
Convert CONFIG_MISC_INIT_R to Kconfig This converts the following to Kconfig: CONFIG_MISC_INIT_R Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Update the defaults logic slightly] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-07-29 18:13:29 +00:00
CONFIG_MISC_INIT_R=y
common, kconfig: move VERSION_VARIABLE to Kconfig move VERSION_VARIABLE from board config file into a Kconfig option. Signed-off-by: Heiko Schocher <hs@denx.de>
2016-09-09 06:12:49 +00:00
CONFIG_VERSION_VARIABLE=y
common/Kconfig: Add DISPLAY_CPUINFO Create a Kconfig entry for DISPLAY_CPUINFO and make it be the default in certain architectures. Migrate all config files. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2016-10-08 18:41:44 +00:00
# CONFIG_DISPLAY_CPUINFO is not set
Convert CONFIG_BOARD_EARLY_INIT_F to Kconfig This converts the following to Kconfig: CONFIG_BOARD_EARLY_INIT_F Signed-off-by: Simon Glass <sjg@chromium.org>
2017-01-23 20:31:20 +00:00
CONFIG_BOARD_EARLY_INIT_F=y
configs: move CONFIG_SPL_TEXT_BASE to Kconfig Moved CONFIG_SPL_TEXT_BASE to common/spl/Kconfig and migrate existing values. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> [trini: Re-run migration] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-09-30 12:31:53 +00:00
CONFIG_SPL_TEXT_BASE=0x80000000
davinci: omapl138-lcdk: enable SPL_SYS_MALLOC_SIMPLE We're working towards enabling the driver model in SPL for da850-lcdk. Enable SPL_SYS_MALLOC_SIMPLE in defconfig to reduce SPL size. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-07-29 06:58:06 +00:00
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
davinci: omapl138_lcdk: add u-boot sector for mmc/sd boot Set the correct CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR value in order to be able to boot from MMC/SD. The SPL is stored at sector 0x75, while u-boot will follow at sector 0xb5. Signed-off-by: Fabien Parent <fparent@baylibre.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-11-29 13:23:41 +00:00
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xb5
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-06-04 15:57:37 +00:00
CONFIG_SPL_NAND_SUPPORT=y
configs: Re-sync HUSH options Move all cases of CONFIG_SYS_HUSH_PARSER out of the config.h files. Remove all cases of CONFIG_SYS_PROMPT_HUSH_PS2 as everyone uses the default. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-22 01:37:19 +00:00
CONFIG_HUSH_PARSER=y
Kconfig: Finish migration of hashing commands Currently these (board agnostic) commands cannot be selected using menuconfig and friends. Fix this the obvious way. As part of this, don't muddle the meaning of CONFIG_HASH_VERIFY to mean both 'hash -v' and "we have a hashing command" as this makes the Kconfig logic odd. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> [trini: Re-apply, add imply for a few cases, run moveconfig.py, also migrate CRC32_VERIFY] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-19 16:26:58 +00:00
CONFIG_CRC32_VERIFY=y
Convert CONFIG_CMD_EEPROM et al to Kconfig This converts the following to Kconfig: CONFIG_CMD_EEPROM CONFIG_CMD_EEPROM_LAYOUT CONFIG_EEPROM_LAYOUT_HELP_STRING Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Rework Kconfig logic slightly, define EEPROM location on TI eval platforms] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-17 09:25:10 +00:00
# CONFIG_CMD_EEPROM is not set
Convert CONFIG_MX_CYCLIC to Kconfig This converts the following to Kconfig: CONFIG_MX_CYCLIC Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: David Lechner <david@lechnology.com>
2019-08-14 12:54:34 +00:00
CONFIG_MX_CYCLIC=y
Move defaults from config_cmd_default.h to Kconfig This sets the default commands Kconfig to match include/config_cmd_default.h commands in the common/Kconfig and removes them from include/configs. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates] Signed-off-by: Tom Rini <trini@konsulko.com>
2015-06-22 21:15:30 +00:00
# CONFIG_CMD_FLASH is not set
davinci: omapl138_lcdk: switch to using TI_COMMON_CMD_OPTIONS Now that we support using TI_COMMON_CMD_OPTIONS, we dont have to enable a number of commands explicitly in the defconfig if we enable TI_COMMON_CMD_OPTIONS. Enable TI_COMMON_CMD_OPTIONS and regenerate the defconfig using "make savedefconfig". CMD_GPIO has been kept disabled because there is no GPIO support (yet) on OMAP-L138 LCDK. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-05-11 14:44:22 +00:00
# CONFIG_CMD_GPIO is not set
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-14 23:58:53 +00:00
CONFIG_CMD_NAND=y
Move defaults from config_cmd_default.h to Kconfig This sets the default commands Kconfig to match include/config_cmd_default.h commands in the common/Kconfig and removes them from include/configs. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates] Signed-off-by: Tom Rini <trini@konsulko.com>
2015-06-22 21:15:30 +00:00
# CONFIG_CMD_SETEXPR is not set
configs: Migrate and re-enabled CONFIG_CMD_MTDPARTS Now that CMD_UBI does not select CMD_MTDPARTS we need to make platforms that had been enabling it turn it on by hand. This exposed that we had not yet migrated CMD_MTDPARTS fully, so do so now. Fixes: 86dfa556d927 ("cmd: ubi: Remove useless call to mtdparts_init()") Signed-off-by: Tom Rini <trini@konsulko.com>
2018-11-14 00:54:45 +00:00
CONFIG_CMD_MTDPARTS=y
Convert CONFIG_CMD_DIAG to Kconfig This converts the following to Kconfig: CONFIG_CMD_DIAG Signed-off-by: Simon Glass <sjg@chromium.org> [trini: imply CMD_DIAG on some keymile configs] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-27 04:28:08 +00:00
CONFIG_CMD_DIAG=y
CONFIG_CMD_UBI=y
configs: omapl138: Enable DM and DT Enable Driver Model and Device-tree support for omapl138 board in U-Boot. Also enable DM_SERIAL and DM_I2C. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-03-16 13:22:21 +00:00
CONFIG_OF_CONTROL=y
davinci: omapl138-lcdk: enable driver-model in SPL Enable CONFIG_SPL_DM and enable the driver model for serial by defining an appropriate device in the board file for da850-lcdk. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-07-29 06:58:09 +00:00
CONFIG_SPL_OF_CONTROL=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-09-03 19:26:12 +00:00
CONFIG_DEFAULT_DEVICE_TREE="da850-lcdk"
davinci: omapl138-lcdk: enable driver-model in SPL Enable CONFIG_SPL_DM and enable the driver model for serial by defining an appropriate device in the board file for da850-lcdk. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-07-29 06:58:09 +00:00
CONFIG_SPL_OF_PLATDATA=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-28 11:16:32 +00:00
CONFIG_ENV_IS_IN_NAND=y
configs: davinci: omapl138_lcdk: add random eth address support Any TFTP or DHCP boot on the Davinci OMAP-L138 LCDK board requires that the 'ethaddr' variable be defined. There are no e-fuses to store the ethernet mac address for this platform, and neither is a MAC address reserved in any format. So enable random MAC address support so that networking boot can be supported. Signed-off-by: Suman Anna <s-anna@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-05-16 17:50:18 +00:00
CONFIG_NET_RANDOM_ETHADDR=y
configs: omapl138: Enable DM and DT Enable Driver Model and Device-tree support for omapl138 board in U-Boot. Also enable DM_SERIAL and DM_I2C. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-03-16 13:22:21 +00:00
CONFIG_DM=y
davinci: omapl138-lcdk: enable driver-model in SPL Enable CONFIG_SPL_DM and enable the driver model for serial by defining an appropriate device in the board file for da850-lcdk. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-07-29 06:58:09 +00:00
CONFIG_SPL_DM=y
configs: omapl138: Enable DM and DT Enable Driver Model and Device-tree support for omapl138 board in U-Boot. Also enable DM_SERIAL and DM_I2C. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-03-16 13:22:21 +00:00
CONFIG_DM_I2C=y
Convert CONFIG_SYS_I2C_DAVINCI to Kconfig This converts the following to Kconfig: CONFIG_SYS_I2C_DAVINCI Signed-off-by: Adam Ford <aford173@gmail.com>
2018-08-10 10:05:22 +00:00
CONFIG_SYS_I2C_DAVINCI=y
ARM: davinci: omapl138_lcdk: Enable DM_MMC With DM_MMC now available, this patch enables DM_MMC for the omapl138_lcdk in U-Boot and keeps the older style for SPL. Signed-off-by: Peter Howard <phoward@gme.net.au> Signed-off-by: Adam Ford <aford173@gmail.com>
2018-08-09 11:15:14 +00:00
CONFIG_DM_MMC=y
davinci: omapl138-lcdk: enable driver model for NAND Enable the driver-model on da850-lcdk. We need to add a dummy nand node to the device tree, as the real nand node is a sub-node of the aemif device. On linux the aemif driver populates all its child nodes, but we can't do it in u-boot currently. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-07-29 06:58:04 +00:00
CONFIG_MTD=y
Convert CONFIG_NAND to Kconfig This converts the following to Kconfig: CONFIG_NAND Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Sync up a few more, add imply's] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-07 21:37:18 +00:00
CONFIG_NAND=y
mtd: nand: raw: Move CONFIG_SYS_NAND_USE_FLASH_BBT to Kconfig Convert CONFIG_SYS_NAND_USE_FLASH_BBT to Kconfig, update defconfigs, headers and whitelist. Please note that this symbol already was used in Kconfig (imply in CONFIG_NAND_ATMEL) which did not work, since this symbol was not available in Kconfig. This changes now with this patch and all boards with CONFIG_NAND_ATMEL will have BBT enabled. Which is what I also need on my GARDENA AT91SAM based board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Gregory CLEMENT <gregory.clement@bootlin.com> [trini: Rework such that the configs are unchanged to start with] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-22 10:28:04 +00:00
CONFIG_SYS_NAND_USE_FLASH_BBT=y
Convert CONFIG_NAND_DAVINCI to Kconfig This converts the following to Kconfig: CONFIG_NAND_DAVINCI Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-08 11:43:36 +00:00
CONFIG_NAND_DAVINCI=y
Convert CONFIG_NAND_OMAP_GPMC et al and CONFIG_NAND_MXC to Kconfig This converts the following to Kconfig: CONFIG_NAND_MXC CONFIG_NAND_OMAP_GPMC CONFIG_NAND_OMAP_GPMC_PREFETCH CONFIG_NAND_OMAP_ELM CONFIG_SPL_NAND_AM33XX_BCH CONFIG_SPL_NAND_SIMPLE CONFIG_SYS_NAND_BUSWIDTH_16BIT Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> [trini: Finish migration of CONFIG_SPL_NAND_SIMPLE, fix some build issues, add CONFIG_NAND_MXC so we can do CONFIG_SYS_NAND_BUSWIDTH_16BIT] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-16 19:08:26 +00:00
CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
davinci: omapl138_lcdk: add NAND SPL boot support NAND SPL boot was missing. Add it. The README specific to omapl138-lcdk is also removed because its content does not apply anymore, i.e. the generated AIS image can be flashed directly to the NAND without using any external tool to create and bootable AIS image. Signed-off-by: Fabien Parent <fparent@baylibre.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-11-29 13:31:34 +00:00
CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
CONFIG_SYS_NAND_U_BOOT_OFFS=0x28000
Convert CONFIG_NAND_OMAP_GPMC et al and CONFIG_NAND_MXC to Kconfig This converts the following to Kconfig: CONFIG_NAND_MXC CONFIG_NAND_OMAP_GPMC CONFIG_NAND_OMAP_GPMC_PREFETCH CONFIG_NAND_OMAP_ELM CONFIG_SPL_NAND_AM33XX_BCH CONFIG_SPL_NAND_SIMPLE CONFIG_SYS_NAND_BUSWIDTH_16BIT Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> [trini: Finish migration of CONFIG_SPL_NAND_SIMPLE, fix some build issues, add CONFIG_NAND_MXC so we can do CONFIG_SYS_NAND_BUSWIDTH_16BIT] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-16 19:08:26 +00:00
CONFIG_SPL_NAND_SIMPLE=y
net: davinci_emac: convert to using the driver model Now that we removed all legacy boards selecting TI_EMAC we can completely convert the driver code to using the driver model. This patch also updates all remaining users of davinci_emac. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Tested-by: Adam Ford <aford173@gmail.com> #am3517-evm & da850-evm Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2019-07-24 08:12:07 +00:00
CONFIG_DM_ETH=y
Convert CONFIG_MII et al to Kconfig This converts the following to Kconfig: CONFIG_MII CONFIG_DRIVER_TI_EMAC Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-07-21 04:03:57 +00:00
CONFIG_MII=y
CONFIG_DRIVER_TI_EMAC=y
ARM: omapl138_lcdk: Enable USB The OMAPL138-lcdk has two USB controllers which are currently disabled. This patch enables them. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-08-12 21:45:21 +00:00
CONFIG_PHY=y
CONFIG_PHY_DA8XX_USB=y
davinci: omapl138-lcdk: enable driver-model in SPL Enable CONFIG_SPL_DM and enable the driver model for serial by defining an appropriate device in the board file for da850-lcdk. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-07-29 06:58:09 +00:00
CONFIG_SPECIFY_CONSOLE_INDEX=y
configs: omapl138: Enable DM and DT Enable Driver Model and Device-tree support for omapl138 board in U-Boot. Also enable DM_SERIAL and DM_I2C. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-03-16 13:22:21 +00:00
CONFIG_DM_SERIAL=y
ns16550: move CONFIG_SYS_NS16550 to Kconfig Move CONFIG_SYS_NS16550 to Kconfig, and run moveconfig.py. Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2015-11-19 13:48:14 +00:00
CONFIG_SYS_NS16550=y
ARM: omapl138_lcdk: Enable USB The OMAPL138-lcdk has two USB controllers which are currently disabled. This patch enables them. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-08-12 21:45:21 +00:00
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_DA8XX=y
CONFIG_USB_MUSB_HOST=y
CONFIG_USB_MUSB_DA8XX=y
CONFIG_USB_MUSB_PIO_ONLY=y
CONFIG_USB_STORAGE=y
davinci: omapl138-lcdk: enable driver-model in SPL Enable CONFIG_SPL_DM and enable the driver model for serial by defining an appropriate device in the board file for da850-lcdk. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-07-29 06:58:09 +00:00
# CONFIG_SPL_OF_LIBFDT is not set
Reference in a new issue Copy permalink