u-boot/configs/Wobo_i5_defconfig

CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
CONFIG_MACH_SUN5I=y
CONFIG_DRAM_CLK=432
CONFIG_MMC0_CD_PIN="PB3"
CONFIG_USB1_VBUS_PIN="PG12"
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-wobo-i5"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_ISO_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_AXP_ALDO3_VOLT=3300
CONFIG_AXP_ALDO4_VOLT=3300
CONFIG_USB_EHCI_HCD=y
sun5i: Add A10s-Wobo-i5 defconfig and dts The Wobo i5 top set box is a somewhat curious A10s based top set box, it uses an AXP209 rather then the AXP152 usually used in combination with the A10s. It has an ethernet phy connected to PORTD rather then PORTA, and its built-in usb wifi is connected via the otg controller. The dts file changes are identical to the changes submitted to the upstream kernel. Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> 2015-09-07 20:43:57 +00:00			`CONFIG_ARM=y`
			`CONFIG_ARCH_SUNXI=y`
			`CONFIG_MACH_SUN5I=y`
			`CONFIG_DRAM_CLK=432`
			`CONFIG_MMC0_CD_PIN="PB3"`
			`CONFIG_USB1_VBUS_PIN="PG12"`
			`CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-wobo-i5"`
			`# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set`
			`CONFIG_SPL=y`
configs: Re-sync Signed-off-by: Tom Rini <trini@konsulko.com> 2017-03-13 17:48:42 +00:00			`CONFIG_SPL_I2C_SUPPORT=y`
sun5i: Add A10s-Wobo-i5 defconfig and dts The Wobo i5 top set box is a somewhat curious A10s based top set box, it uses an AXP209 rather then the AXP152 usually used in combination with the A10s. It has an ethernet phy connected to PORTD rather then PORTA, and its built-in usb wifi is connected via the otg controller. The dts file changes are identical to the changes submitted to the upstream kernel. Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> 2015-09-07 20:43:57 +00:00			`# CONFIG_CMD_IMLS is not set`
			`# CONFIG_CMD_FLASH is not set`
			`# CONFIG_CMD_FPGA is not set`
disk: convert CONFIG_DOS_PARTITION to Kconfig Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com> 2017-01-27 10:00:37 +00:00			`# CONFIG_SPL_DOS_PARTITION is not set`
disk: convert CONFIG_ISO_PARTITION to Kconfig Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com> 2017-01-27 10:00:38 +00:00			`# CONFIG_SPL_ISO_PARTITION is not set`
disk: convert CONFIG_EFI_PARTITION to Kconfig Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com> 2017-01-27 10:00:41 +00:00			`# CONFIG_SPL_EFI_PARTITION is not set`
sunxi: Enable ALDO3 and ALDO4 in Wobo_i5_defconfig These are used for the usb wifi and if we leave the enabling up to the kernel, we get hit by the axp209 issues with enabling ldo3 or 4 post boot and the systems hangs as soon as it is enabled. Signed-off-by: Hans de Goede <hdegoede@redhat.com> 2016-06-02 16:46:09 +00:00			`CONFIG_AXP_ALDO3_VOLT=3300`
			`CONFIG_AXP_ALDO4_VOLT=3300`
configs: Resync with savedefconfig Signed-off-by: Tom Rini <trini@konsulko.com> 2016-09-08 20:11:59 +00:00			`CONFIG_USB_EHCI_HCD=y`