Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-14 15:23:07 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/riscv/cpu/start.S

448 lines
9.5 KiB
ArmAsm
Raw Normal View History

SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-06 21:58:06 +00:00
/* SPDX-License-Identifier: GPL-2.0+ */
riscv: cpu: Add nx25 to support RISC-V Add Andes nx25 cpu core (called AndesStar V5) to support RISC-V arch Verifications: 1. startup and relocation ok. 2. boot from rom or ram both ok. 2. timer driver ok. 3. uart driver ok 4. mmc driver ok 5. spi driver ok. 6. 32/64 bit both ok. Detail verification message please see doc/README.ae250. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Signed-off-by: Greentime Hu <green.hu@gmail.com> Cc: Padmarao Begari <Padmarao.Begari@microsemi.com>
2017-12-26 05:55:48 +00:00
/*
* Startup Code for RISC-V Core
*
* Copyright (c) 2017 Microsemi Corporation.
* Copyright (c) 2017 Padmarao Begari <Padmarao.Begari@microsemi.com>
*
* Copyright (C) 2017 Andes Technology Corporation
* Rick Chen, Andes Technology Corporation <rick@andestech.com>
*/
#include <asm-offsets.h>
#include <config.h>
#include <common.h>
#include <elf.h>
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-25 16:16:03 +00:00
#include <system-constants.h>
riscv: cpu: Add nx25 to support RISC-V Add Andes nx25 cpu core (called AndesStar V5) to support RISC-V arch Verifications: 1. startup and relocation ok. 2. boot from rom or ram both ok. 2. timer driver ok. 3. uart driver ok 4. mmc driver ok 5. spi driver ok. 6. 32/64 bit both ok. Detail verification message please see doc/README.ae250. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Signed-off-by: Greentime Hu <green.hu@gmail.com> Cc: Padmarao Begari <Padmarao.Begari@microsemi.com>
2017-12-26 05:55:48 +00:00
#include <asm/encoding.h>
riscv: Save boot hart id to the global data At present the hart id passed via a0 in the U-Boot entry is saved to s0 at the beginning but does not preserve later. Save it to the global data structure so that it can be used later. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Anup Patel <anup@brainfault.org>
2018-12-12 14:12:45 +00:00
#include <generated/asm-offsets.h>
riscv: cpu: Add nx25 to support RISC-V Add Andes nx25 cpu core (called AndesStar V5) to support RISC-V arch Verifications: 1. startup and relocation ok. 2. boot from rom or ram both ok. 2. timer driver ok. 3. uart driver ok 4. mmc driver ok 5. spi driver ok. 6. 32/64 bit both ok. Detail verification message please see doc/README.ae250. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Signed-off-by: Greentime Hu <green.hu@gmail.com> Cc: Padmarao Begari <Padmarao.Begari@microsemi.com>
2017-12-26 05:55:48 +00:00
#ifdef CONFIG_32BIT
riscv: fix inconsistent use of spaces and tabs in start.S start.S uses both tabs and spaces after instructions. Fix this by only using tabs after instructions. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2018-11-22 10:26:24 +00:00
#define LREG lw
#define SREG sw
#define REGBYTES 4
riscv: cpu: Add nx25 to support RISC-V Add Andes nx25 cpu core (called AndesStar V5) to support RISC-V arch Verifications: 1. startup and relocation ok. 2. boot from rom or ram both ok. 2. timer driver ok. 3. uart driver ok 4. mmc driver ok 5. spi driver ok. 6. 32/64 bit both ok. Detail verification message please see doc/README.ae250. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Signed-off-by: Greentime Hu <green.hu@gmail.com> Cc: Padmarao Begari <Padmarao.Begari@microsemi.com>
2017-12-26 05:55:48 +00:00
#define RELOC_TYPE R_RISCV_32
#define SYM_INDEX 0x8
#define SYM_SIZE 0x10
#else
riscv: fix inconsistent use of spaces and tabs in start.S start.S uses both tabs and spaces after instructions. Fix this by only using tabs after instructions. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2018-11-22 10:26:24 +00:00
#define LREG ld
#define SREG sd
#define REGBYTES 8
riscv: cpu: Add nx25 to support RISC-V Add Andes nx25 cpu core (called AndesStar V5) to support RISC-V arch Verifications: 1. startup and relocation ok. 2. boot from rom or ram both ok. 2. timer driver ok. 3. uart driver ok 4. mmc driver ok 5. spi driver ok. 6. 32/64 bit both ok. Detail verification message please see doc/README.ae250. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Signed-off-by: Greentime Hu <green.hu@gmail.com> Cc: Padmarao Begari <Padmarao.Begari@microsemi.com>
2017-12-26 05:55:48 +00:00
#define RELOC_TYPE R_RISCV_64
#define SYM_INDEX 0x20
#define SYM_SIZE 0x18
#endif
riscv: hang if relocation of secondary harts fails Print an error message and hang if smp_call_function() returns an error, indicating that relocation of the secondary harts has failed. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Anup Patel <anup.patel@wdc.com>
2019-03-17 18:28:40 +00:00
.section .data
secondary_harts_relocation_error:
.ascii "Relocation of secondary harts has failed, error %d\n"
riscv: fix inconsistent use of spaces and tabs in start.S start.S uses both tabs and spaces after instructions. Fix this by only using tabs after instructions. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2018-11-22 10:26:24 +00:00
.section .text
riscv: cpu: Add nx25 to support RISC-V Add Andes nx25 cpu core (called AndesStar V5) to support RISC-V arch Verifications: 1. startup and relocation ok. 2. boot from rom or ram both ok. 2. timer driver ok. 3. uart driver ok 4. mmc driver ok 5. spi driver ok. 6. 32/64 bit both ok. Detail verification message please see doc/README.ae250. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Signed-off-by: Greentime Hu <green.hu@gmail.com> Cc: Padmarao Begari <Padmarao.Begari@microsemi.com>
2017-12-26 05:55:48 +00:00
.globl _start
_start:
riscv: add run mode configuration for SPL U-Boot SPL can be run in a different privilege mode from U-Boot proper. Add new configuration entries for SPL to allow the run mode to be configured independently of U-Boot proper. Extend all uses of the CONFIG_RISCV_SMODE and CONFIG_RISCV_MMODE configuration symbols to also cover the SPL equivalents. Ensure that files compatible with only one privilege mode are not included in builds targeting an incompatible privilege mode. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Anup Patel <anup.patel@wdc.com>
2019-08-21 19:14:43 +00:00
#if CONFIG_IS_ENABLED(RISCV_MMODE)
riscv: Access CSRs using CSR numbers We should prefer accessing CSRs using their CSR numbers because: 1. It compiles fine with older toolchains. 2. We can use latest CSR names in #define macro names of CSR numbers as-per RISC-V spec. 3. We can access newly added CSRs even if toolchain does not recognize newly added CSRs by name. This commit is inspired from Linux kernel commit a3182c91ef4e ("RISC-V: Access CSRs using CSR numbers"). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2019-07-11 06:43:13 +00:00
csrr a0, CSR_MHARTID
riscv: do not rely on hart ID passed by previous boot stage RISC-V U-Boot expects the hart ID to be passed to it via register a0 by the previous boot stage. Machine mode firmware such as BBL and OpenSBI do this when starting their payload (U-Boot) in supervisor mode. If U-Boot is running in machine mode, this task must be handled by the boot ROM. Explicitly populate register a0 with the hart ID from the mhartid CSR to avoid possible problems on RISC-V processors with a boot ROM that does not handle this task. Suggested-by: Rick Chen <rick@andestech.com> Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com> Tested-by: Rick Chen <rick@andestech.com>
2019-03-17 18:28:39 +00:00
#endif
riscv: Add some comments to start.S This adds comments regarding the ordering and purpose of certain instructions as I understand them. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Leo Liang <ycliang@andestech.com>
2020-09-21 11:51:41 +00:00
/*
* Save hart id and dtb pointer. The thread pointer register is not
* modified by C code. It is used by secondary_hart_loop.
*/
riscv: save hart ID in register tp instead of s0 The hart ID passed by the previous boot stage is currently stored in register s0. If we divert the control flow inside a function, which is required as part of multi-hart support, the function epilog may not be called, clobbering register s0. Save the hart ID in the unallocatable register tp instead to protect the hart ID. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Anup Patel <anup.patel@wdc.com>
2019-03-17 18:28:36 +00:00
mv tp, a0
riscv: save hart ID and device tree passed by prior boot stage Store the hart ID and device tree passed by the prior boot stage (in a0 and a1) in registers s0 and s1. Replace one use of s1 in start.S to avoid overwriting it. The device tree is also stored in memory to make it available to U-Boot with the configuration CONFIG_OF_PRIOR_STAGE. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2018-11-22 10:26:29 +00:00
mv s1, a1
riscv: Ensure gp is NULL or points to valid data This ensures constructs like `if (gd & gd->...) { ... }` work when accessing the global data pointer. Without this change, it was possible for a very early trap to cause _exit_trap to directly or indirectly (through printf) to read arbitrary memory. This could cause a second trap, preventing show_regs from being printed. printf (and specifically puts) uses gd to determine what function to print with. These functions in turn use gd to find the serial device, etc. However, before accessing gd, puts first checks to see if it is non-NULL. This indicates an existing (perhaps undocumented) assumption that either gd is NULL or it is completely valid. Before this patch, gd either points to unexpected data (because it retains the value it did from the prior-stage) or points to uninitialized data (because it has not yet been initialized by board_init_f_init_reserve) until the hart has acquired available_harts_lock. This can cause two problems, depending on the value of gd->flags. If GD_FLG_SERIAL_READY is unset, then some garbage data will be printed to stdout, but there will not be a second trap. However, if GD_FLG_SERIAL_READY is set, then puts will try to print with serial_puts, which will likely cause a second trap. After this patch, gd is zero up until either a hart has set it in wait_for_gd_init, or until it is set by arch_init_gd. This prevents its usage before its data is initialized because both handle_trap and puts ensure that gd is nonzero before using it. After gd has been set, it is OK to access it because its data has been cleared (and so flags is valid). XIP cannot use locks because flash is not writable. This leaves it vulnerable to the same class of bugs regarding already-pending IPIs as before this series. Fixing that would require finding another method of synchronization, which is outside the scope of this series. Fixes: 7c6ca03eae ("riscv: additional crash information") Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Rick Chen <rick@andestech.com>
2020-09-21 11:51:40 +00:00
/*
* Set the global data pointer to a known value in case we get a very
* early trap. The global data pointer will be set its actual value only
* after it has been initialized.
*/
mv gp, zero
riscv: Add some comments to start.S This adds comments regarding the ordering and purpose of certain instructions as I understand them. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Leo Liang <ycliang@andestech.com>
2020-09-21 11:51:41 +00:00
/*
* Set the trap handler. This must happen after initializing gp because
* the handler may use it.
*/
riscv: fix inconsistent use of spaces and tabs in start.S start.S uses both tabs and spaces after instructions. Fix this by only using tabs after instructions. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2018-11-22 10:26:24 +00:00
la t0, trap_entry
riscv: Add kconfig option to run U-Boot in S-mode This patch adds kconfig option RISCV_SMODE to run U-Boot in S-mode. When this opition is enabled we use s<xyz> CSRs instead of m<xyz> CSRs. It is important to note that there is no equivalent S-mode CSR for misa and mhartid CSRs so we expect M-mode runtime firmware (BBL or equivalent) to emulate misa and mhartid CSR read. In-future, we will have more patches to avoid accessing misa and mhartid CSRs from S-mode. Signed-off-by: Anup Patel <anup@brainfault.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2018-12-03 05:27:40 +00:00
csrw MODE_PREFIX(tvec), t0
riscv: do not blindly modify the mstatus CSR The mstatus CSR includes WPRI (writes preserve values, reads ignore values) fields and must therefore not be set to zero without preserving these fields. It is not apparent why mstatus is set to zero here since it is not required for U-Boot to run. Remove it. This instruction and others encode zero as an immediate. RISC-V has the zero register for this purpose. Replace the immediates with the zero register. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2018-11-22 10:26:28 +00:00
riscv: Add some comments to start.S This adds comments regarding the ordering and purpose of certain instructions as I understand them. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Leo Liang <ycliang@andestech.com>
2020-09-21 11:51:41 +00:00
/*
* Mask all interrupts. Interrupts are disabled globally (in m/sstatus)
* for U-Boot, but we will need to read m/sip to determine if we get an
* IPI
*/
riscv: Add kconfig option to run U-Boot in S-mode This patch adds kconfig option RISCV_SMODE to run U-Boot in S-mode. When this opition is enabled we use s<xyz> CSRs instead of m<xyz> CSRs. It is important to note that there is no equivalent S-mode CSR for misa and mhartid CSRs so we expect M-mode runtime firmware (BBL or equivalent) to emulate misa and mhartid CSR read. In-future, we will have more patches to avoid accessing misa and mhartid CSRs from S-mode. Signed-off-by: Anup Patel <anup@brainfault.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2018-12-03 05:27:40 +00:00
csrw MODE_PREFIX(ie), zero
riscv: cpu: Add nx25 to support RISC-V Add Andes nx25 cpu core (called AndesStar V5) to support RISC-V arch Verifications: 1. startup and relocation ok. 2. boot from rom or ram both ok. 2. timer driver ok. 3. uart driver ok 4. mmc driver ok 5. spi driver ok. 6. 32/64 bit both ok. Detail verification message please see doc/README.ae250. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Signed-off-by: Greentime Hu <green.hu@gmail.com> Cc: Padmarao Begari <Padmarao.Begari@microsemi.com>
2017-12-26 05:55:48 +00:00
riscv: Introduce SPL_SMP Kconfig option for U-Boot SPL With SBI v0.2 HSM extension, only a single hart need to boot and enter operating system. The booting hart can bring up secondary harts one by one afterwards. For U-Boot running in SPL, SMP can be turned on, while in U-Boot proper, SMP can be optionally turned off if using SBI v0.2 HSM. Introduce a new SPL_SMP Kconfig option to support this. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Atish Patra <atish.patra@wdc.com>
2020-04-16 15:09:30 +00:00
#if CONFIG_IS_ENABLED(SMP)
riscv: add support for multi-hart systems On RISC-V, all harts boot independently. To be able to run on a multi-hart system, U-Boot must be extended with the functionality to manage all harts in the system. All harts entering U-Boot are registered in the available_harts mask stored in global data. A hart lottery system as used in the Linux kernel selects the hart U-Boot runs on. All other harts are halted. U-Boot can delegate functions to them using smp_call_function(). Every hart has a valid pointer to the global data structure and a 8KiB stack by default. The stack size is set with CONFIG_STACK_SIZE_SHIFT. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-03-17 18:28:37 +00:00
/* check if hart is within range */
/* tp: hart id */
li t0, CONFIG_NR_CPUS
bge tp, t0, hart_out_of_bounds_loop
/* set xSIE bit to receive IPIs */
riscv: add run mode configuration for SPL U-Boot SPL can be run in a different privilege mode from U-Boot proper. Add new configuration entries for SPL to allow the run mode to be configured independently of U-Boot proper. Extend all uses of the CONFIG_RISCV_SMODE and CONFIG_RISCV_MMODE configuration symbols to also cover the SPL equivalents. Ensure that files compatible with only one privilege mode are not included in builds targeting an incompatible privilege mode. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Anup Patel <anup.patel@wdc.com>
2019-08-21 19:14:43 +00:00
#if CONFIG_IS_ENABLED(RISCV_MMODE)
riscv: add support for multi-hart systems On RISC-V, all harts boot independently. To be able to run on a multi-hart system, U-Boot must be extended with the functionality to manage all harts in the system. All harts entering U-Boot are registered in the available_harts mask stored in global data. A hart lottery system as used in the Linux kernel selects the hart U-Boot runs on. All other harts are halted. U-Boot can delegate functions to them using smp_call_function(). Every hart has a valid pointer to the global data structure and a 8KiB stack by default. The stack size is set with CONFIG_STACK_SIZE_SHIFT. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-03-17 18:28:37 +00:00
li t0, MIE_MSIE
#else
li t0, SIE_SSIE
#endif
csrs MODE_PREFIX(ie), t0
#endif
riscv: cpu: Add nx25 to support RISC-V Add Andes nx25 cpu core (called AndesStar V5) to support RISC-V arch Verifications: 1. startup and relocation ok. 2. boot from rom or ram both ok. 2. timer driver ok. 3. uart driver ok 4. mmc driver ok 5. spi driver ok. 6. 32/64 bit both ok. Detail verification message please see doc/README.ae250. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Signed-off-by: Greentime Hu <green.hu@gmail.com> Cc: Padmarao Begari <Padmarao.Begari@microsemi.com>
2017-12-26 05:55:48 +00:00
/*
* Set stackpointer in internal/ex RAM to call board_init_f
*/
call_board_init_f:
riscv: fix inconsistent use of spaces and tabs in start.S start.S uses both tabs and spaces after instructions. Fix this by only using tabs after instructions. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2018-11-22 10:26:24 +00:00
li t0, -16
riscv: add SPL support U-Boot SPL on the generic RISC-V CPU supports two boot flows, directly jumping to the image and via OpenSBI firmware. In the first case, both U-Boot SPL and proper must be compiled to run in the same privilege mode. Using OpenSBI firmware, U-Boot SPL must be compiled for machine mode and U-Boot proper for supervisor mode. To be able to use SPL, boards have to provide a supported SPL boot device. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Anup Patel <anup.patel@wdc.com>
2019-08-21 19:14:45 +00:00
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_STACK)
li t1, CONFIG_SPL_STACK
#else
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-25 16:16:03 +00:00
li t1, SYS_INIT_SP_ADDR
riscv: add SPL support U-Boot SPL on the generic RISC-V CPU supports two boot flows, directly jumping to the image and via OpenSBI firmware. In the first case, both U-Boot SPL and proper must be compiled to run in the same privilege mode. Using OpenSBI firmware, U-Boot SPL must be compiled for machine mode and U-Boot proper for supervisor mode. To be able to use SPL, boards have to provide a supported SPL boot device. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Anup Patel <anup.patel@wdc.com>
2019-08-21 19:14:45 +00:00
#endif
riscv: fix inconsistent use of spaces and tabs in start.S start.S uses both tabs and spaces after instructions. Fix this by only using tabs after instructions. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2018-11-22 10:26:24 +00:00
and sp, t1, t0 /* force 16 byte alignment */
riscv: cpu: Add nx25 to support RISC-V Add Andes nx25 cpu core (called AndesStar V5) to support RISC-V arch Verifications: 1. startup and relocation ok. 2. boot from rom or ram both ok. 2. timer driver ok. 3. uart driver ok 4. mmc driver ok 5. spi driver ok. 6. 32/64 bit both ok. Detail verification message please see doc/README.ae250. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Signed-off-by: Greentime Hu <green.hu@gmail.com> Cc: Padmarao Begari <Padmarao.Begari@microsemi.com>
2017-12-26 05:55:48 +00:00
call_board_init_f_0:
mv a0, sp
jal board_init_f_alloc_reserve
riscv: add support for multi-hart systems On RISC-V, all harts boot independently. To be able to run on a multi-hart system, U-Boot must be extended with the functionality to manage all harts in the system. All harts entering U-Boot are registered in the available_harts mask stored in global data. A hart lottery system as used in the Linux kernel selects the hart U-Boot runs on. All other harts are halted. U-Boot can delegate functions to them using smp_call_function(). Every hart has a valid pointer to the global data structure and a 8KiB stack by default. The stack size is set with CONFIG_STACK_SIZE_SHIFT. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-03-17 18:28:37 +00:00
/*
riscv: Ensure gp is NULL or points to valid data This ensures constructs like `if (gd & gd->...) { ... }` work when accessing the global data pointer. Without this change, it was possible for a very early trap to cause _exit_trap to directly or indirectly (through printf) to read arbitrary memory. This could cause a second trap, preventing show_regs from being printed. printf (and specifically puts) uses gd to determine what function to print with. These functions in turn use gd to find the serial device, etc. However, before accessing gd, puts first checks to see if it is non-NULL. This indicates an existing (perhaps undocumented) assumption that either gd is NULL or it is completely valid. Before this patch, gd either points to unexpected data (because it retains the value it did from the prior-stage) or points to uninitialized data (because it has not yet been initialized by board_init_f_init_reserve) until the hart has acquired available_harts_lock. This can cause two problems, depending on the value of gd->flags. If GD_FLG_SERIAL_READY is unset, then some garbage data will be printed to stdout, but there will not be a second trap. However, if GD_FLG_SERIAL_READY is set, then puts will try to print with serial_puts, which will likely cause a second trap. After this patch, gd is zero up until either a hart has set it in wait_for_gd_init, or until it is set by arch_init_gd. This prevents its usage before its data is initialized because both handle_trap and puts ensure that gd is nonzero before using it. After gd has been set, it is OK to access it because its data has been cleared (and so flags is valid). XIP cannot use locks because flash is not writable. This leaves it vulnerable to the same class of bugs regarding already-pending IPIs as before this series. Fixing that would require finding another method of synchronization, which is outside the scope of this series. Fixes: 7c6ca03eae ("riscv: additional crash information") Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Rick Chen <rick@andestech.com>
2020-09-21 11:51:40 +00:00
* Save global data pointer for later. We don't set it here because it
* is not initialized yet.
riscv: add support for multi-hart systems On RISC-V, all harts boot independently. To be able to run on a multi-hart system, U-Boot must be extended with the functionality to manage all harts in the system. All harts entering U-Boot are registered in the available_harts mask stored in global data. A hart lottery system as used in the Linux kernel selects the hart U-Boot runs on. All other harts are halted. U-Boot can delegate functions to them using smp_call_function(). Every hart has a valid pointer to the global data structure and a 8KiB stack by default. The stack size is set with CONFIG_STACK_SIZE_SHIFT. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-03-17 18:28:37 +00:00
*/
riscv: Ensure gp is NULL or points to valid data This ensures constructs like `if (gd & gd->...) { ... }` work when accessing the global data pointer. Without this change, it was possible for a very early trap to cause _exit_trap to directly or indirectly (through printf) to read arbitrary memory. This could cause a second trap, preventing show_regs from being printed. printf (and specifically puts) uses gd to determine what function to print with. These functions in turn use gd to find the serial device, etc. However, before accessing gd, puts first checks to see if it is non-NULL. This indicates an existing (perhaps undocumented) assumption that either gd is NULL or it is completely valid. Before this patch, gd either points to unexpected data (because it retains the value it did from the prior-stage) or points to uninitialized data (because it has not yet been initialized by board_init_f_init_reserve) until the hart has acquired available_harts_lock. This can cause two problems, depending on the value of gd->flags. If GD_FLG_SERIAL_READY is unset, then some garbage data will be printed to stdout, but there will not be a second trap. However, if GD_FLG_SERIAL_READY is set, then puts will try to print with serial_puts, which will likely cause a second trap. After this patch, gd is zero up until either a hart has set it in wait_for_gd_init, or until it is set by arch_init_gd. This prevents its usage before its data is initialized because both handle_trap and puts ensure that gd is nonzero before using it. After gd has been set, it is OK to access it because its data has been cleared (and so flags is valid). XIP cannot use locks because flash is not writable. This leaves it vulnerable to the same class of bugs regarding already-pending IPIs as before this series. Fixing that would require finding another method of synchronization, which is outside the scope of this series. Fixes: 7c6ca03eae ("riscv: additional crash information") Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Rick Chen <rick@andestech.com>
2020-09-21 11:51:40 +00:00
mv s0, a0
riscv: add support for multi-hart systems On RISC-V, all harts boot independently. To be able to run on a multi-hart system, U-Boot must be extended with the functionality to manage all harts in the system. All harts entering U-Boot are registered in the available_harts mask stored in global data. A hart lottery system as used in the Linux kernel selects the hart U-Boot runs on. All other harts are halted. U-Boot can delegate functions to them using smp_call_function(). Every hart has a valid pointer to the global data structure and a 8KiB stack by default. The stack size is set with CONFIG_STACK_SIZE_SHIFT. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-03-17 18:28:37 +00:00
/* setup stack */
riscv: Introduce SPL_SMP Kconfig option for U-Boot SPL With SBI v0.2 HSM extension, only a single hart need to boot and enter operating system. The booting hart can bring up secondary harts one by one afterwards. For U-Boot running in SPL, SMP can be turned on, while in U-Boot proper, SMP can be optionally turned off if using SBI v0.2 HSM. Introduce a new SPL_SMP Kconfig option to support this. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Atish Patra <atish.patra@wdc.com>
2020-04-16 15:09:30 +00:00
#if CONFIG_IS_ENABLED(SMP)
riscv: add support for multi-hart systems On RISC-V, all harts boot independently. To be able to run on a multi-hart system, U-Boot must be extended with the functionality to manage all harts in the system. All harts entering U-Boot are registered in the available_harts mask stored in global data. A hart lottery system as used in the Linux kernel selects the hart U-Boot runs on. All other harts are halted. U-Boot can delegate functions to them using smp_call_function(). Every hart has a valid pointer to the global data structure and a 8KiB stack by default. The stack size is set with CONFIG_STACK_SIZE_SHIFT. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-03-17 18:28:37 +00:00
/* tp: hart id */
slli t0, tp, CONFIG_STACK_SIZE_SHIFT
sub sp, a0, t0
#else
riscv: cpu: Add nx25 to support RISC-V Add Andes nx25 cpu core (called AndesStar V5) to support RISC-V arch Verifications: 1. startup and relocation ok. 2. boot from rom or ram both ok. 2. timer driver ok. 3. uart driver ok 4. mmc driver ok 5. spi driver ok. 6. 32/64 bit both ok. Detail verification message please see doc/README.ae250. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Signed-off-by: Greentime Hu <green.hu@gmail.com> Cc: Padmarao Begari <Padmarao.Begari@microsemi.com>
2017-12-26 05:55:48 +00:00
mv sp, a0
riscv: add support for multi-hart systems On RISC-V, all harts boot independently. To be able to run on a multi-hart system, U-Boot must be extended with the functionality to manage all harts in the system. All harts entering U-Boot are registered in the available_harts mask stored in global data. A hart lottery system as used in the Linux kernel selects the hart U-Boot runs on. All other harts are halted. U-Boot can delegate functions to them using smp_call_function(). Every hart has a valid pointer to the global data structure and a 8KiB stack by default. The stack size is set with CONFIG_STACK_SIZE_SHIFT. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-03-17 18:28:37 +00:00
#endif
riscv: cpu: Add callback to init each core Add a callback harts_early_init() to start.S to allow different riscv hart perform setup code for each hart as early as possible. Since all the harts enter the callback, they must be able to run the same setup. Signed-off-by: Green Wan <green.wan@sifive.com> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-05-03 06:23:04 +00:00
/* Configure proprietary settings and customized CSRs of harts */
call_harts_early_init:
jal harts_early_init
riscv: Introduce CONFIG_XIP to support booting from flash When U-Boot boots from flash, during the boot process, hart_lottery and available_harts_lock variable addresses point to flash which is not writable. This causes boot failures on AE350. Introduce a config option CONFIG_XIP to support such configuration. Signed-off-by: Rick Chen <rick@andestech.com> Cc: Greentime Hu <greentime@andestech.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-04-30 05:49:33 +00:00
#ifndef CONFIG_XIP
riscv: add support for multi-hart systems On RISC-V, all harts boot independently. To be able to run on a multi-hart system, U-Boot must be extended with the functionality to manage all harts in the system. All harts entering U-Boot are registered in the available_harts mask stored in global data. A hart lottery system as used in the Linux kernel selects the hart U-Boot runs on. All other harts are halted. U-Boot can delegate functions to them using smp_call_function(). Every hart has a valid pointer to the global data structure and a 8KiB stack by default. The stack size is set with CONFIG_STACK_SIZE_SHIFT. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-03-17 18:28:37 +00:00
/*
* Pick hart to initialize global data and run U-Boot. The other harts
* wait for initialization to complete.
*/
la t0, hart_lottery
riscv: fix the wrong swap value register Not s2 register, t1 register is correct Fortunately, it works because t1 register has a garbage value Signed-off-by: Brad Kim <brad.kim@semifive.com> Reviewed-by: Lukas Auer <lukas@auer.io> Reviewed-by: Leo Liang <ycliang@andestech.com>
2020-11-13 11:47:51 +00:00
li t1, 1
riscv: add support for multi-hart systems On RISC-V, all harts boot independently. To be able to run on a multi-hart system, U-Boot must be extended with the functionality to manage all harts in the system. All harts entering U-Boot are registered in the available_harts mask stored in global data. A hart lottery system as used in the Linux kernel selects the hart U-Boot runs on. All other harts are halted. U-Boot can delegate functions to them using smp_call_function(). Every hart has a valid pointer to the global data structure and a 8KiB stack by default. The stack size is set with CONFIG_STACK_SIZE_SHIFT. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-03-17 18:28:37 +00:00
amoswap.w s2, t1, 0(t0)
bnez s2, wait_for_gd_init
riscv: Introduce CONFIG_XIP to support booting from flash When U-Boot boots from flash, during the boot process, hart_lottery and available_harts_lock variable addresses point to flash which is not writable. This causes boot failures on AE350. Introduce a config option CONFIG_XIP to support such configuration. Signed-off-by: Rick Chen <rick@andestech.com> Cc: Greentime Hu <greentime@andestech.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-04-30 05:49:33 +00:00
#else
riscv: Ensure gp is NULL or points to valid data This ensures constructs like `if (gd & gd->...) { ... }` work when accessing the global data pointer. Without this change, it was possible for a very early trap to cause _exit_trap to directly or indirectly (through printf) to read arbitrary memory. This could cause a second trap, preventing show_regs from being printed. printf (and specifically puts) uses gd to determine what function to print with. These functions in turn use gd to find the serial device, etc. However, before accessing gd, puts first checks to see if it is non-NULL. This indicates an existing (perhaps undocumented) assumption that either gd is NULL or it is completely valid. Before this patch, gd either points to unexpected data (because it retains the value it did from the prior-stage) or points to uninitialized data (because it has not yet been initialized by board_init_f_init_reserve) until the hart has acquired available_harts_lock. This can cause two problems, depending on the value of gd->flags. If GD_FLG_SERIAL_READY is unset, then some garbage data will be printed to stdout, but there will not be a second trap. However, if GD_FLG_SERIAL_READY is set, then puts will try to print with serial_puts, which will likely cause a second trap. After this patch, gd is zero up until either a hart has set it in wait_for_gd_init, or until it is set by arch_init_gd. This prevents its usage before its data is initialized because both handle_trap and puts ensure that gd is nonzero before using it. After gd has been set, it is OK to access it because its data has been cleared (and so flags is valid). XIP cannot use locks because flash is not writable. This leaves it vulnerable to the same class of bugs regarding already-pending IPIs as before this series. Fixing that would require finding another method of synchronization, which is outside the scope of this series. Fixes: 7c6ca03eae ("riscv: additional crash information") Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Rick Chen <rick@andestech.com>
2020-09-21 11:51:40 +00:00
/*
* FIXME: gp is set before it is initialized. If an XIP U-Boot ever
* encounters a pending IPI on boot it is liable to jump to whatever
* memory happens to be in ipi_data.addr on boot. It may also run into
* problems if it encounters an exception too early (because printf/puts
* accesses gd).
*/
mv gp, s0
riscv: Introduce CONFIG_XIP to support booting from flash When U-Boot boots from flash, during the boot process, hart_lottery and available_harts_lock variable addresses point to flash which is not writable. This causes boot failures on AE350. Introduce a config option CONFIG_XIP to support such configuration. Signed-off-by: Rick Chen <rick@andestech.com> Cc: Greentime Hu <greentime@andestech.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-04-30 05:49:33 +00:00
bnez tp, secondary_hart_loop
#endif
riscv: save hart ID and device tree passed by prior boot stage Store the hart ID and device tree passed by the prior boot stage (in a0 and a1) in registers s0 and s1. Replace one use of s1 in start.S to avoid overwriting it. The device tree is also stored in memory to make it available to U-Boot with the configuration CONFIG_OF_PRIOR_STAGE. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2018-11-22 10:26:29 +00:00
riscv: cpu: set gp before board_init_f_init_reserve Restore global pointer before board_init_f_init_reserve call, as "a0" can be set in harts_early_init call and we end up with invalid global pointer. Signed-off-by: Nikita Shubin <n.shubin@yadro.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2022-05-20 11:41:17 +00:00
mv a0, s0
riscv: cpu: Add nx25 to support RISC-V Add Andes nx25 cpu core (called AndesStar V5) to support RISC-V arch Verifications: 1. startup and relocation ok. 2. boot from rom or ram both ok. 2. timer driver ok. 3. uart driver ok 4. mmc driver ok 5. spi driver ok. 6. 32/64 bit both ok. Detail verification message please see doc/README.ae250. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Signed-off-by: Greentime Hu <green.hu@gmail.com> Cc: Padmarao Begari <Padmarao.Begari@microsemi.com>
2017-12-26 05:55:48 +00:00
jal board_init_f_init_reserve
riscv: Provide a mechanism to fix DT for reserved memory In RISC-V, M-mode software can reserve physical memory regions by setting appropriate physical memory protection (PMP) csr. As the PMP csr are accessible only in M-mode, S-mode U-Boot can not read this configuration directly. However, M-mode software can pass this information via reserved-memory node in device tree so that S-mode software can access this information. This patch provides a framework to copy to the reserved-memory node from one DT to another. This will be used to update the DT used by U-Boot and the DT passed to the next stage OS. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-04-21 18:15:01 +00:00
SREG s1, GD_FIRMWARE_FDT_ADDR(gp)
riscv: Save boot hart id to the global data At present the hart id passed via a0 in the U-Boot entry is saved to s0 at the beginning but does not preserve later. Save it to the global data structure so that it can be used later. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Anup Patel <anup@brainfault.org>
2018-12-12 14:12:45 +00:00
/* save the boot hart id to global_data */
riscv: save hart ID in register tp instead of s0 The hart ID passed by the previous boot stage is currently stored in register s0. If we divert the control flow inside a function, which is required as part of multi-hart support, the function epilog may not be called, clobbering register s0. Save the hart ID in the unallocatable register tp instead to protect the hart ID. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Anup Patel <anup.patel@wdc.com>
2019-03-17 18:28:36 +00:00
SREG tp, GD_BOOT_HART(gp)
riscv: Save boot hart id to the global data At present the hart id passed via a0 in the U-Boot entry is saved to s0 at the beginning but does not preserve later. Save it to the global data structure so that it can be used later. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Anup Patel <anup@brainfault.org>
2018-12-12 14:12:45 +00:00
riscv: Introduce CONFIG_XIP to support booting from flash When U-Boot boots from flash, during the boot process, hart_lottery and available_harts_lock variable addresses point to flash which is not writable. This causes boot failures on AE350. Introduce a config option CONFIG_XIP to support such configuration. Signed-off-by: Rick Chen <rick@andestech.com> Cc: Greentime Hu <greentime@andestech.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-04-30 05:49:33 +00:00
#ifndef CONFIG_XIP
riscv: add support for multi-hart systems On RISC-V, all harts boot independently. To be able to run on a multi-hart system, U-Boot must be extended with the functionality to manage all harts in the system. All harts entering U-Boot are registered in the available_harts mask stored in global data. A hart lottery system as used in the Linux kernel selects the hart U-Boot runs on. All other harts are halted. U-Boot can delegate functions to them using smp_call_function(). Every hart has a valid pointer to the global data structure and a 8KiB stack by default. The stack size is set with CONFIG_STACK_SIZE_SHIFT. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-03-17 18:28:37 +00:00
la t0, available_harts_lock
riscv: Consolidate fences into AMOs for available_harts_lock We can reduce the number of instructions needed to use available_harts_lock by using the aq and rl suffixes for AMOs. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Rick Chen <rick@andestech.com>
2020-09-21 11:51:39 +00:00
amoswap.w.rl zero, zero, 0(t0)
riscv: add support for multi-hart systems On RISC-V, all harts boot independently. To be able to run on a multi-hart system, U-Boot must be extended with the functionality to manage all harts in the system. All harts entering U-Boot are registered in the available_harts mask stored in global data. A hart lottery system as used in the Linux kernel selects the hart U-Boot runs on. All other harts are halted. U-Boot can delegate functions to them using smp_call_function(). Every hart has a valid pointer to the global data structure and a 8KiB stack by default. The stack size is set with CONFIG_STACK_SIZE_SHIFT. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-03-17 18:28:37 +00:00
wait_for_gd_init:
la t0, available_harts_lock
li t1, 1
riscv: Consolidate fences into AMOs for available_harts_lock We can reduce the number of instructions needed to use available_harts_lock by using the aq and rl suffixes for AMOs. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Rick Chen <rick@andestech.com>
2020-09-21 11:51:39 +00:00
1: amoswap.w.aq t1, t1, 0(t0)
riscv: add support for multi-hart systems On RISC-V, all harts boot independently. To be able to run on a multi-hart system, U-Boot must be extended with the functionality to manage all harts in the system. All harts entering U-Boot are registered in the available_harts mask stored in global data. A hart lottery system as used in the Linux kernel selects the hart U-Boot runs on. All other harts are halted. U-Boot can delegate functions to them using smp_call_function(). Every hart has a valid pointer to the global data structure and a 8KiB stack by default. The stack size is set with CONFIG_STACK_SIZE_SHIFT. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-03-17 18:28:37 +00:00
bnez t1, 1b
riscv: Ensure gp is NULL or points to valid data This ensures constructs like `if (gd & gd->...) { ... }` work when accessing the global data pointer. Without this change, it was possible for a very early trap to cause _exit_trap to directly or indirectly (through printf) to read arbitrary memory. This could cause a second trap, preventing show_regs from being printed. printf (and specifically puts) uses gd to determine what function to print with. These functions in turn use gd to find the serial device, etc. However, before accessing gd, puts first checks to see if it is non-NULL. This indicates an existing (perhaps undocumented) assumption that either gd is NULL or it is completely valid. Before this patch, gd either points to unexpected data (because it retains the value it did from the prior-stage) or points to uninitialized data (because it has not yet been initialized by board_init_f_init_reserve) until the hart has acquired available_harts_lock. This can cause two problems, depending on the value of gd->flags. If GD_FLG_SERIAL_READY is unset, then some garbage data will be printed to stdout, but there will not be a second trap. However, if GD_FLG_SERIAL_READY is set, then puts will try to print with serial_puts, which will likely cause a second trap. After this patch, gd is zero up until either a hart has set it in wait_for_gd_init, or until it is set by arch_init_gd. This prevents its usage before its data is initialized because both handle_trap and puts ensure that gd is nonzero before using it. After gd has been set, it is OK to access it because its data has been cleared (and so flags is valid). XIP cannot use locks because flash is not writable. This leaves it vulnerable to the same class of bugs regarding already-pending IPIs as before this series. Fixing that would require finding another method of synchronization, which is outside the scope of this series. Fixes: 7c6ca03eae ("riscv: additional crash information") Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Rick Chen <rick@andestech.com>
2020-09-21 11:51:40 +00:00
/*
* Set the global data pointer only when gd_t has been initialized.
* This was already set by arch_setup_gd on the boot hart, but all other
* harts' global data pointers gets set here.
*/
mv gp, s0
riscv: add support for multi-hart systems On RISC-V, all harts boot independently. To be able to run on a multi-hart system, U-Boot must be extended with the functionality to manage all harts in the system. All harts entering U-Boot are registered in the available_harts mask stored in global data. A hart lottery system as used in the Linux kernel selects the hart U-Boot runs on. All other harts are halted. U-Boot can delegate functions to them using smp_call_function(). Every hart has a valid pointer to the global data structure and a 8KiB stack by default. The stack size is set with CONFIG_STACK_SIZE_SHIFT. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-03-17 18:28:37 +00:00
/* register available harts in the available_harts mask */
li t1, 1
sll t1, t1, tp
LREG t2, GD_AVAILABLE_HARTS(gp)
or t2, t2, t1
SREG t2, GD_AVAILABLE_HARTS(gp)
riscv: Consolidate fences into AMOs for available_harts_lock We can reduce the number of instructions needed to use available_harts_lock by using the aq and rl suffixes for AMOs. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Rick Chen <rick@andestech.com>
2020-09-21 11:51:39 +00:00
amoswap.w.rl zero, zero, 0(t0)
riscv: add support for multi-hart systems On RISC-V, all harts boot independently. To be able to run on a multi-hart system, U-Boot must be extended with the functionality to manage all harts in the system. All harts entering U-Boot are registered in the available_harts mask stored in global data. A hart lottery system as used in the Linux kernel selects the hart U-Boot runs on. All other harts are halted. U-Boot can delegate functions to them using smp_call_function(). Every hart has a valid pointer to the global data structure and a 8KiB stack by default. The stack size is set with CONFIG_STACK_SIZE_SHIFT. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-03-17 18:28:37 +00:00
/*
* Continue on hart lottery winner, others branch to
* secondary_hart_loop.
*/
bnez s2, secondary_hart_loop
riscv: Introduce CONFIG_XIP to support booting from flash When U-Boot boots from flash, during the boot process, hart_lottery and available_harts_lock variable addresses point to flash which is not writable. This causes boot failures on AE350. Introduce a config option CONFIG_XIP to support such configuration. Signed-off-by: Rick Chen <rick@andestech.com> Cc: Greentime Hu <greentime@andestech.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-04-30 05:49:33 +00:00
#endif
riscv: add support for multi-hart systems On RISC-V, all harts boot independently. To be able to run on a multi-hart system, U-Boot must be extended with the functionality to manage all harts in the system. All harts entering U-Boot are registered in the available_harts mask stored in global data. A hart lottery system as used in the Linux kernel selects the hart U-Boot runs on. All other harts are halted. U-Boot can delegate functions to them using smp_call_function(). Every hart has a valid pointer to the global data structure and a 8KiB stack by default. The stack size is set with CONFIG_STACK_SIZE_SHIFT. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-03-17 18:28:37 +00:00
riscv: delay initialization of caches and debug UART Move the initialization of the caches and the debug UART until after board_init_f_init_reserve. This is in preparation for SMP support, where code prior to this point will be executed by all harts. This ensures that initialization will only be performed once on the main hart running U-Boot. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-03-17 18:28:35 +00:00
/* Enable cache */
jal icache_enable
jal dcache_enable
#ifdef CONFIG_DEBUG_UART
jal debug_uart_init
#endif
riscv: fix inconsistent use of spaces and tabs in start.S start.S uses both tabs and spaces after instructions. Fix this by only using tabs after instructions. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2018-11-22 10:26:24 +00:00
mv a0, zero /* a0 <-- boot_flags = 0 */
la t5, board_init_f
riscv: add SPL support U-Boot SPL on the generic RISC-V CPU supports two boot flows, directly jumping to the image and via OpenSBI firmware. In the first case, both U-Boot SPL and proper must be compiled to run in the same privilege mode. Using OpenSBI firmware, U-Boot SPL must be compiled for machine mode and U-Boot proper for supervisor mode. To be able to use SPL, boards have to provide a supported SPL boot device. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Anup Patel <anup.patel@wdc.com>
2019-08-21 19:14:45 +00:00
jalr t5 /* jump to board_init_f() */
#ifdef CONFIG_SPL_BUILD
spl_clear_bss:
la t0, __bss_start
la t1, __bss_end
riscv: support SPL stack and global data relocation To support relocation of the stack and global data on RISC-V, the secondary harts must be notified of the change using IPIs. We can reuse the hart relocation code for this purpose. It uses global data to store the new stack pointer and global data pointer for the secondary harts. This means that we cannot update the global data pointer of the main hart in spl_relocate_stack_gd(), because the secondary harts have not yet been relocated at this point. It is updated after the secondary harts have been notified. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Anup Patel <anup.patel@wdc.com>
2019-08-21 19:14:46 +00:00
beq t0, t1, spl_stack_gd_setup
riscv: add SPL support U-Boot SPL on the generic RISC-V CPU supports two boot flows, directly jumping to the image and via OpenSBI firmware. In the first case, both U-Boot SPL and proper must be compiled to run in the same privilege mode. Using OpenSBI firmware, U-Boot SPL must be compiled for machine mode and U-Boot proper for supervisor mode. To be able to use SPL, boards have to provide a supported SPL boot device. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Anup Patel <anup.patel@wdc.com>
2019-08-21 19:14:45 +00:00
spl_clear_bss_loop:
SREG zero, 0(t0)
addi t0, t0, REGBYTES
riscv: Fix clear bss loop in the start-up code For RV64, it will use sd instruction to clear t0 register, and the increament will be 8 bytes. So if the difference between__bss_strat and __bss_end was not 8 bytes aligned, the clear bss loop will overflow and acks like system hang. Signed-off-by: Rick Chen <rick@andestech.com> Cc: KC Lin <kclin@andestech.com> Cc: Alan Kao <alankao@andestech.com>
2019-11-14 05:52:27 +00:00
blt t0, t1, spl_clear_bss_loop
riscv: add SPL support U-Boot SPL on the generic RISC-V CPU supports two boot flows, directly jumping to the image and via OpenSBI firmware. In the first case, both U-Boot SPL and proper must be compiled to run in the same privilege mode. Using OpenSBI firmware, U-Boot SPL must be compiled for machine mode and U-Boot proper for supervisor mode. To be able to use SPL, boards have to provide a supported SPL boot device. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Anup Patel <anup.patel@wdc.com>
2019-08-21 19:14:45 +00:00
riscv: support SPL stack and global data relocation To support relocation of the stack and global data on RISC-V, the secondary harts must be notified of the change using IPIs. We can reuse the hart relocation code for this purpose. It uses global data to store the new stack pointer and global data pointer for the secondary harts. This means that we cannot update the global data pointer of the main hart in spl_relocate_stack_gd(), because the secondary harts have not yet been relocated at this point. It is updated after the secondary harts have been notified. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Anup Patel <anup.patel@wdc.com>
2019-08-21 19:14:46 +00:00
spl_stack_gd_setup:
jal spl_relocate_stack_gd
/* skip setup if we did not relocate */
beqz a0, spl_call_board_init_r
mv s0, a0
/* setup stack on main hart */
riscv: Introduce SPL_SMP Kconfig option for U-Boot SPL With SBI v0.2 HSM extension, only a single hart need to boot and enter operating system. The booting hart can bring up secondary harts one by one afterwards. For U-Boot running in SPL, SMP can be turned on, while in U-Boot proper, SMP can be optionally turned off if using SBI v0.2 HSM. Introduce a new SPL_SMP Kconfig option to support this. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Atish Patra <atish.patra@wdc.com>
2020-04-16 15:09:30 +00:00
#if CONFIG_IS_ENABLED(SMP)
riscv: support SPL stack and global data relocation To support relocation of the stack and global data on RISC-V, the secondary harts must be notified of the change using IPIs. We can reuse the hart relocation code for this purpose. It uses global data to store the new stack pointer and global data pointer for the secondary harts. This means that we cannot update the global data pointer of the main hart in spl_relocate_stack_gd(), because the secondary harts have not yet been relocated at this point. It is updated after the secondary harts have been notified. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Anup Patel <anup.patel@wdc.com>
2019-08-21 19:14:46 +00:00
/* tp: hart id */
slli t0, tp, CONFIG_STACK_SIZE_SHIFT
sub sp, s0, t0
#else
mv sp, s0
#endif
riscv: Fix linking error when building u-boot-spl with no SMP support Switch off SMP support when building u-boot-spl would cause linking error as follow: undefined reference to 'secondary hart relocate' and 'smp_call_function'. Add macro to wrap up proper code region that needs SMP configuration on. Signed-off by: Leo Liang <ycliang@andestech.com> Cc: rick@andestech.com Reviewed-by: Bin Meng <bin.meng@windriver.com>
2020-06-29 08:27:28 +00:00
#if CONFIG_IS_ENABLED(SMP)
riscv: support SPL stack and global data relocation To support relocation of the stack and global data on RISC-V, the secondary harts must be notified of the change using IPIs. We can reuse the hart relocation code for this purpose. It uses global data to store the new stack pointer and global data pointer for the secondary harts. This means that we cannot update the global data pointer of the main hart in spl_relocate_stack_gd(), because the secondary harts have not yet been relocated at this point. It is updated after the secondary harts have been notified. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Anup Patel <anup.patel@wdc.com>
2019-08-21 19:14:46 +00:00
/* set new stack and global data pointer on secondary harts */
spl_secondary_hart_stack_gd_setup:
la a0, secondary_hart_relocate
mv a1, s0
mv a2, s0
riscv: add option to wait for ack from secondary harts in smp functions Add a wait option to smp_call_function() to wait for the secondary harts to acknowledge the call-function request. The request is considered to be acknowledged once each secondary hart has cleared the corresponding IPI. As part of the call-function request, the secondary harts invalidate the instruction cache after clearing the IPI. This adds a delay between acknowledgment (clear IPI) and fulfillment (call function) of the request. We want to use the acknowledgment to be able to judge when the request has been completed. Remove the delay by clearing the IPI after cache invalidation and just before calling the function from the request. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Rick Chen <rick@andestech.com> Tested-by: Rick Chen <rick@andestech.com> Reviewed-by: Anup Patel <anup.patel@wdc.com>
2019-12-08 22:28:51 +00:00
mv a3, zero
riscv: support SPL stack and global data relocation To support relocation of the stack and global data on RISC-V, the secondary harts must be notified of the change using IPIs. We can reuse the hart relocation code for this purpose. It uses global data to store the new stack pointer and global data pointer for the secondary harts. This means that we cannot update the global data pointer of the main hart in spl_relocate_stack_gd(), because the secondary harts have not yet been relocated at this point. It is updated after the secondary harts have been notified. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Anup Patel <anup.patel@wdc.com>
2019-08-21 19:14:46 +00:00
jal smp_call_function
/* hang if relocation of secondary harts has failed */
beqz a0, 1f
mv a1, a0
la a0, secondary_harts_relocation_error
jal printf
jal hang
riscv: Fix linking error when building u-boot-spl with no SMP support Switch off SMP support when building u-boot-spl would cause linking error as follow: undefined reference to 'secondary hart relocate' and 'smp_call_function'. Add macro to wrap up proper code region that needs SMP configuration on. Signed-off by: Leo Liang <ycliang@andestech.com> Cc: rick@andestech.com Reviewed-by: Bin Meng <bin.meng@windriver.com>
2020-06-29 08:27:28 +00:00
#endif
riscv: support SPL stack and global data relocation To support relocation of the stack and global data on RISC-V, the secondary harts must be notified of the change using IPIs. We can reuse the hart relocation code for this purpose. It uses global data to store the new stack pointer and global data pointer for the secondary harts. This means that we cannot update the global data pointer of the main hart in spl_relocate_stack_gd(), because the secondary harts have not yet been relocated at this point. It is updated after the secondary harts have been notified. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Anup Patel <anup.patel@wdc.com>
2019-08-21 19:14:46 +00:00
/* set new global data pointer on main hart */
1: mv gp, s0
riscv: add SPL support U-Boot SPL on the generic RISC-V CPU supports two boot flows, directly jumping to the image and via OpenSBI firmware. In the first case, both U-Boot SPL and proper must be compiled to run in the same privilege mode. Using OpenSBI firmware, U-Boot SPL must be compiled for machine mode and U-Boot proper for supervisor mode. To be able to use SPL, boards have to provide a supported SPL boot device. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Anup Patel <anup.patel@wdc.com>
2019-08-21 19:14:45 +00:00
spl_call_board_init_r:
mv a0, zero
mv a1, zero
jal board_init_r
#endif
riscv: cpu: Add nx25 to support RISC-V Add Andes nx25 cpu core (called AndesStar V5) to support RISC-V arch Verifications: 1. startup and relocation ok. 2. boot from rom or ram both ok. 2. timer driver ok. 3. uart driver ok 4. mmc driver ok 5. spi driver ok. 6. 32/64 bit both ok. Detail verification message please see doc/README.ae250. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Signed-off-by: Greentime Hu <green.hu@gmail.com> Cc: Padmarao Begari <Padmarao.Begari@microsemi.com>
2017-12-26 05:55:48 +00:00
/*
common: Move relocate_code() to init.h This is an init function so move it out of the common header. Avoid using the typedef so that we don't have to include the global_data header file. Also tidy up the function style in comments while we are here. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-12-28 17:44:45 +00:00
* void relocate_code(addr_sp, gd, addr_moni)
riscv: cpu: Add nx25 to support RISC-V Add Andes nx25 cpu core (called AndesStar V5) to support RISC-V arch Verifications: 1. startup and relocation ok. 2. boot from rom or ram both ok. 2. timer driver ok. 3. uart driver ok 4. mmc driver ok 5. spi driver ok. 6. 32/64 bit both ok. Detail verification message please see doc/README.ae250. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Signed-off-by: Greentime Hu <green.hu@gmail.com> Cc: Padmarao Begari <Padmarao.Begari@microsemi.com>
2017-12-26 05:55:48 +00:00
*
* This "function" does not return, instead it continues in RAM
* after relocating the monitor code.
*
*/
.globl relocate_code
relocate_code:
riscv: fix inconsistent use of spaces and tabs in start.S start.S uses both tabs and spaces after instructions. Fix this by only using tabs after instructions. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2018-11-22 10:26:24 +00:00
mv s2, a0 /* save addr_sp */
mv s3, a1 /* save addr of gd */
mv s4, a2 /* save addr of destination */
riscv: cpu: Add nx25 to support RISC-V Add Andes nx25 cpu core (called AndesStar V5) to support RISC-V arch Verifications: 1. startup and relocation ok. 2. boot from rom or ram both ok. 2. timer driver ok. 3. uart driver ok 4. mmc driver ok 5. spi driver ok. 6. 32/64 bit both ok. Detail verification message please see doc/README.ae250. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Signed-off-by: Greentime Hu <green.hu@gmail.com> Cc: Padmarao Begari <Padmarao.Begari@microsemi.com>
2017-12-26 05:55:48 +00:00
/*
*Set up the stack
*/
stack_setup:
riscv: Introduce SPL_SMP Kconfig option for U-Boot SPL With SBI v0.2 HSM extension, only a single hart need to boot and enter operating system. The booting hart can bring up secondary harts one by one afterwards. For U-Boot running in SPL, SMP can be turned on, while in U-Boot proper, SMP can be optionally turned off if using SBI v0.2 HSM. Introduce a new SPL_SMP Kconfig option to support this. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Atish Patra <atish.patra@wdc.com>
2020-04-16 15:09:30 +00:00
#if CONFIG_IS_ENABLED(SMP)
riscv: add support for multi-hart systems On RISC-V, all harts boot independently. To be able to run on a multi-hart system, U-Boot must be extended with the functionality to manage all harts in the system. All harts entering U-Boot are registered in the available_harts mask stored in global data. A hart lottery system as used in the Linux kernel selects the hart U-Boot runs on. All other harts are halted. U-Boot can delegate functions to them using smp_call_function(). Every hart has a valid pointer to the global data structure and a 8KiB stack by default. The stack size is set with CONFIG_STACK_SIZE_SHIFT. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-03-17 18:28:37 +00:00
/* tp: hart id */
slli t0, tp, CONFIG_STACK_SIZE_SHIFT
sub sp, s2, t0
#else
riscv: fix inconsistent use of spaces and tabs in start.S start.S uses both tabs and spaces after instructions. Fix this by only using tabs after instructions. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2018-11-22 10:26:24 +00:00
mv sp, s2
riscv: add support for multi-hart systems On RISC-V, all harts boot independently. To be able to run on a multi-hart system, U-Boot must be extended with the functionality to manage all harts in the system. All harts entering U-Boot are registered in the available_harts mask stored in global data. A hart lottery system as used in the Linux kernel selects the hart U-Boot runs on. All other harts are halted. U-Boot can delegate functions to them using smp_call_function(). Every hart has a valid pointer to the global data structure and a 8KiB stack by default. The stack size is set with CONFIG_STACK_SIZE_SHIFT. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-03-17 18:28:37 +00:00
#endif
riscv: fix inconsistent use of spaces and tabs in start.S start.S uses both tabs and spaces after instructions. Fix this by only using tabs after instructions. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2018-11-22 10:26:24 +00:00
la t0, _start
sub t6, s4, t0 /* t6 <- relocation offset */
beq t0, s4, clear_bss /* skip relocation */
riscv: cpu: Add nx25 to support RISC-V Add Andes nx25 cpu core (called AndesStar V5) to support RISC-V arch Verifications: 1. startup and relocation ok. 2. boot from rom or ram both ok. 2. timer driver ok. 3. uart driver ok 4. mmc driver ok 5. spi driver ok. 6. 32/64 bit both ok. Detail verification message please see doc/README.ae250. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Signed-off-by: Greentime Hu <green.hu@gmail.com> Cc: Padmarao Begari <Padmarao.Begari@microsemi.com>
2017-12-26 05:55:48 +00:00
riscv: fix inconsistent use of spaces and tabs in start.S start.S uses both tabs and spaces after instructions. Fix this by only using tabs after instructions. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2018-11-22 10:26:24 +00:00
mv t1, s4 /* t1 <- scratch for copy_loop */
la t3, __bss_start
sub t3, t3, t0 /* t3 <- __bss_start_ofs */
add t2, t0, t3 /* t2 <- source end address */
riscv: cpu: Add nx25 to support RISC-V Add Andes nx25 cpu core (called AndesStar V5) to support RISC-V arch Verifications: 1. startup and relocation ok. 2. boot from rom or ram both ok. 2. timer driver ok. 3. uart driver ok 4. mmc driver ok 5. spi driver ok. 6. 32/64 bit both ok. Detail verification message please see doc/README.ae250. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Signed-off-by: Greentime Hu <green.hu@gmail.com> Cc: Padmarao Begari <Padmarao.Begari@microsemi.com>
2017-12-26 05:55:48 +00:00
copy_loop:
riscv: fix inconsistent use of spaces and tabs in start.S start.S uses both tabs and spaces after instructions. Fix this by only using tabs after instructions. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2018-11-22 10:26:24 +00:00
LREG t5, 0(t0)
addi t0, t0, REGBYTES
SREG t5, 0(t1)
addi t1, t1, REGBYTES
blt t0, t2, copy_loop
riscv: cpu: Add nx25 to support RISC-V Add Andes nx25 cpu core (called AndesStar V5) to support RISC-V arch Verifications: 1. startup and relocation ok. 2. boot from rom or ram both ok. 2. timer driver ok. 3. uart driver ok 4. mmc driver ok 5. spi driver ok. 6. 32/64 bit both ok. Detail verification message please see doc/README.ae250. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Signed-off-by: Greentime Hu <green.hu@gmail.com> Cc: Padmarao Begari <Padmarao.Begari@microsemi.com>
2017-12-26 05:55:48 +00:00
/*
* Update dynamic relocations after board_init_f
*/
fix_rela_dyn:
riscv: fix inconsistent use of spaces and tabs in start.S start.S uses both tabs and spaces after instructions. Fix this by only using tabs after instructions. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2018-11-22 10:26:24 +00:00
la t1, __rel_dyn_start
la t2, __rel_dyn_end
beq t1, t2, clear_bss
add t1, t1, t6 /* t1 <- rela_dyn_start in RAM */
add t2, t2, t6 /* t2 <- rela_dyn_end in RAM */
riscv: cpu: Add nx25 to support RISC-V Add Andes nx25 cpu core (called AndesStar V5) to support RISC-V arch Verifications: 1. startup and relocation ok. 2. boot from rom or ram both ok. 2. timer driver ok. 3. uart driver ok 4. mmc driver ok 5. spi driver ok. 6. 32/64 bit both ok. Detail verification message please see doc/README.ae250. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Signed-off-by: Greentime Hu <green.hu@gmail.com> Cc: Padmarao Begari <Padmarao.Begari@microsemi.com>
2017-12-26 05:55:48 +00:00
/*
* skip first reserved entry: address, type, addend
*/
riscv: update fix_rela_dyn The addend is now added for RELOC_TYPE relocs. Also, changed the loop structure so that all the R_RISCV_RELATIVE relocs are not required to be at the beginning of the list. Signed-off-by: Marcus Comstedt <marcus@mc.pp.se> Cc: Rick Chen <rick@andestech.com>
2019-08-11 12:45:29 +00:00
j 10f
riscv: cpu: Add nx25 to support RISC-V Add Andes nx25 cpu core (called AndesStar V5) to support RISC-V arch Verifications: 1. startup and relocation ok. 2. boot from rom or ram both ok. 2. timer driver ok. 3. uart driver ok 4. mmc driver ok 5. spi driver ok. 6. 32/64 bit both ok. Detail verification message please see doc/README.ae250. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Signed-off-by: Greentime Hu <green.hu@gmail.com> Cc: Padmarao Begari <Padmarao.Begari@microsemi.com>
2017-12-26 05:55:48 +00:00
6:
riscv: fix inconsistent use of spaces and tabs in start.S start.S uses both tabs and spaces after instructions. Fix this by only using tabs after instructions. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2018-11-22 10:26:24 +00:00
LREG t5, -(REGBYTES*2)(t1) /* t5 <-- relocation info:type */
li t3, R_RISCV_RELATIVE /* reloc type R_RISCV_RELATIVE */
bne t5, t3, 8f /* skip non-RISCV_RELOC entries */
LREG t3, -(REGBYTES*3)(t1)
LREG t5, -(REGBYTES)(t1) /* t5 <-- addend */
add t5, t5, t6 /* t5 <-- location to fix up in RAM */
add t3, t3, t6 /* t3 <-- location to fix up in RAM */
SREG t5, 0(t3)
riscv: update fix_rela_dyn The addend is now added for RELOC_TYPE relocs. Also, changed the loop structure so that all the R_RISCV_RELATIVE relocs are not required to be at the beginning of the list. Signed-off-by: Marcus Comstedt <marcus@mc.pp.se> Cc: Rick Chen <rick@andestech.com>
2019-08-11 12:45:29 +00:00
j 10f
riscv: cpu: Add nx25 to support RISC-V Add Andes nx25 cpu core (called AndesStar V5) to support RISC-V arch Verifications: 1. startup and relocation ok. 2. boot from rom or ram both ok. 2. timer driver ok. 3. uart driver ok 4. mmc driver ok 5. spi driver ok. 6. 32/64 bit both ok. Detail verification message please see doc/README.ae250. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Signed-off-by: Greentime Hu <green.hu@gmail.com> Cc: Padmarao Begari <Padmarao.Begari@microsemi.com>
2017-12-26 05:55:48 +00:00
8:
riscv: fix inconsistent use of spaces and tabs in start.S start.S uses both tabs and spaces after instructions. Fix this by only using tabs after instructions. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2018-11-22 10:26:24 +00:00
la t4, __dyn_sym_start
add t4, t4, t6
riscv: cpu: Add nx25 to support RISC-V Add Andes nx25 cpu core (called AndesStar V5) to support RISC-V arch Verifications: 1. startup and relocation ok. 2. boot from rom or ram both ok. 2. timer driver ok. 3. uart driver ok 4. mmc driver ok 5. spi driver ok. 6. 32/64 bit both ok. Detail verification message please see doc/README.ae250. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Signed-off-by: Greentime Hu <green.hu@gmail.com> Cc: Padmarao Begari <Padmarao.Begari@microsemi.com>
2017-12-26 05:55:48 +00:00
9:
riscv: fix inconsistent use of spaces and tabs in start.S start.S uses both tabs and spaces after instructions. Fix this by only using tabs after instructions. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2018-11-22 10:26:24 +00:00
LREG t5, -(REGBYTES*2)(t1) /* t5 <-- relocation info:type */
srli t0, t5, SYM_INDEX /* t0 <--- sym table index */
andi t5, t5, 0xFF /* t5 <--- relocation type */
li t3, RELOC_TYPE
bne t5, t3, 10f /* skip non-addned entries */
riscv: cpu: Add nx25 to support RISC-V Add Andes nx25 cpu core (called AndesStar V5) to support RISC-V arch Verifications: 1. startup and relocation ok. 2. boot from rom or ram both ok. 2. timer driver ok. 3. uart driver ok 4. mmc driver ok 5. spi driver ok. 6. 32/64 bit both ok. Detail verification message please see doc/README.ae250. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Signed-off-by: Greentime Hu <green.hu@gmail.com> Cc: Padmarao Begari <Padmarao.Begari@microsemi.com>
2017-12-26 05:55:48 +00:00
riscv: fix inconsistent use of spaces and tabs in start.S start.S uses both tabs and spaces after instructions. Fix this by only using tabs after instructions. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2018-11-22 10:26:24 +00:00
LREG t3, -(REGBYTES*3)(t1)
li t5, SYM_SIZE
mul t0, t0, t5
riscv: save hart ID and device tree passed by prior boot stage Store the hart ID and device tree passed by the prior boot stage (in a0 and a1) in registers s0 and s1. Replace one use of s1 in start.S to avoid overwriting it. The device tree is also stored in memory to make it available to U-Boot with the configuration CONFIG_OF_PRIOR_STAGE. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2018-11-22 10:26:29 +00:00
add s5, t4, t0
riscv: update fix_rela_dyn The addend is now added for RELOC_TYPE relocs. Also, changed the loop structure so that all the R_RISCV_RELATIVE relocs are not required to be at the beginning of the list. Signed-off-by: Marcus Comstedt <marcus@mc.pp.se> Cc: Rick Chen <rick@andestech.com>
2019-08-11 12:45:29 +00:00
LREG t0, -(REGBYTES)(t1) /* t0 <-- addend */
riscv: save hart ID and device tree passed by prior boot stage Store the hart ID and device tree passed by the prior boot stage (in a0 and a1) in registers s0 and s1. Replace one use of s1 in start.S to avoid overwriting it. The device tree is also stored in memory to make it available to U-Boot with the configuration CONFIG_OF_PRIOR_STAGE. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2018-11-22 10:26:29 +00:00
LREG t5, REGBYTES(s5)
riscv: update fix_rela_dyn The addend is now added for RELOC_TYPE relocs. Also, changed the loop structure so that all the R_RISCV_RELATIVE relocs are not required to be at the beginning of the list. Signed-off-by: Marcus Comstedt <marcus@mc.pp.se> Cc: Rick Chen <rick@andestech.com>
2019-08-11 12:45:29 +00:00
add t5, t5, t0
riscv: fix inconsistent use of spaces and tabs in start.S start.S uses both tabs and spaces after instructions. Fix this by only using tabs after instructions. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2018-11-22 10:26:24 +00:00
add t5, t5, t6 /* t5 <-- location to fix up in RAM */
add t3, t3, t6 /* t3 <-- location to fix up in RAM */
SREG t5, 0(t3)
riscv: cpu: Add nx25 to support RISC-V Add Andes nx25 cpu core (called AndesStar V5) to support RISC-V arch Verifications: 1. startup and relocation ok. 2. boot from rom or ram both ok. 2. timer driver ok. 3. uart driver ok 4. mmc driver ok 5. spi driver ok. 6. 32/64 bit both ok. Detail verification message please see doc/README.ae250. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Signed-off-by: Greentime Hu <green.hu@gmail.com> Cc: Padmarao Begari <Padmarao.Begari@microsemi.com>
2017-12-26 05:55:48 +00:00
10:
riscv: fix inconsistent use of spaces and tabs in start.S start.S uses both tabs and spaces after instructions. Fix this by only using tabs after instructions. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2018-11-22 10:26:24 +00:00
addi t1, t1, (REGBYTES*3)
riscv: update fix_rela_dyn The addend is now added for RELOC_TYPE relocs. Also, changed the loop structure so that all the R_RISCV_RELATIVE relocs are not required to be at the beginning of the list. Signed-off-by: Marcus Comstedt <marcus@mc.pp.se> Cc: Rick Chen <rick@andestech.com>
2019-08-11 12:45:29 +00:00
ble t1, t2, 6b
riscv: cpu: Add nx25 to support RISC-V Add Andes nx25 cpu core (called AndesStar V5) to support RISC-V arch Verifications: 1. startup and relocation ok. 2. boot from rom or ram both ok. 2. timer driver ok. 3. uart driver ok 4. mmc driver ok 5. spi driver ok. 6. 32/64 bit both ok. Detail verification message please see doc/README.ae250. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Signed-off-by: Greentime Hu <green.hu@gmail.com> Cc: Padmarao Begari <Padmarao.Begari@microsemi.com>
2017-12-26 05:55:48 +00:00
/*
* trap update
*/
riscv: fix inconsistent use of spaces and tabs in start.S start.S uses both tabs and spaces after instructions. Fix this by only using tabs after instructions. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2018-11-22 10:26:24 +00:00
la t0, trap_entry
add t0, t0, t6
riscv: Add kconfig option to run U-Boot in S-mode This patch adds kconfig option RISCV_SMODE to run U-Boot in S-mode. When this opition is enabled we use s<xyz> CSRs instead of m<xyz> CSRs. It is important to note that there is no equivalent S-mode CSR for misa and mhartid CSRs so we expect M-mode runtime firmware (BBL or equivalent) to emulate misa and mhartid CSR read. In-future, we will have more patches to avoid accessing misa and mhartid CSRs from S-mode. Signed-off-by: Anup Patel <anup@brainfault.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2018-12-03 05:27:40 +00:00
csrw MODE_PREFIX(tvec), t0
riscv: cpu: Add nx25 to support RISC-V Add Andes nx25 cpu core (called AndesStar V5) to support RISC-V arch Verifications: 1. startup and relocation ok. 2. boot from rom or ram both ok. 2. timer driver ok. 3. uart driver ok 4. mmc driver ok 5. spi driver ok. 6. 32/64 bit both ok. Detail verification message please see doc/README.ae250. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Signed-off-by: Greentime Hu <green.hu@gmail.com> Cc: Padmarao Begari <Padmarao.Begari@microsemi.com>
2017-12-26 05:55:48 +00:00
clear_bss:
riscv: fix inconsistent use of spaces and tabs in start.S start.S uses both tabs and spaces after instructions. Fix this by only using tabs after instructions. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2018-11-22 10:26:24 +00:00
la t0, __bss_start /* t0 <- rel __bss_start in FLASH */
add t0, t0, t6 /* t0 <- rel __bss_start in RAM */
la t1, __bss_end /* t1 <- rel __bss_end in FLASH */
add t1, t1, t6 /* t1 <- rel __bss_end in RAM */
riscv: add support for multi-hart systems On RISC-V, all harts boot independently. To be able to run on a multi-hart system, U-Boot must be extended with the functionality to manage all harts in the system. All harts entering U-Boot are registered in the available_harts mask stored in global data. A hart lottery system as used in the Linux kernel selects the hart U-Boot runs on. All other harts are halted. U-Boot can delegate functions to them using smp_call_function(). Every hart has a valid pointer to the global data structure and a 8KiB stack by default. The stack size is set with CONFIG_STACK_SIZE_SHIFT. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-03-17 18:28:37 +00:00
beq t0, t1, relocate_secondary_harts
riscv: cpu: Add nx25 to support RISC-V Add Andes nx25 cpu core (called AndesStar V5) to support RISC-V arch Verifications: 1. startup and relocation ok. 2. boot from rom or ram both ok. 2. timer driver ok. 3. uart driver ok 4. mmc driver ok 5. spi driver ok. 6. 32/64 bit both ok. Detail verification message please see doc/README.ae250. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Signed-off-by: Greentime Hu <green.hu@gmail.com> Cc: Padmarao Begari <Padmarao.Begari@microsemi.com>
2017-12-26 05:55:48 +00:00
clbss_l:
riscv: do not blindly modify the mstatus CSR The mstatus CSR includes WPRI (writes preserve values, reads ignore values) fields and must therefore not be set to zero without preserving these fields. It is not apparent why mstatus is set to zero here since it is not required for U-Boot to run. Remove it. This instruction and others encode zero as an immediate. RISC-V has the zero register for this purpose. Replace the immediates with the zero register. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2018-11-22 10:26:28 +00:00
SREG zero, 0(t0) /* clear loop... */
riscv: fix inconsistent use of spaces and tabs in start.S start.S uses both tabs and spaces after instructions. Fix this by only using tabs after instructions. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2018-11-22 10:26:24 +00:00
addi t0, t0, REGBYTES
riscv: Fix clear bss loop in the start-up code For RV64, it will use sd instruction to clear t0 register, and the increament will be 8 bytes. So if the difference between__bss_strat and __bss_end was not 8 bytes aligned, the clear bss loop will overflow and acks like system hang. Signed-off-by: Rick Chen <rick@andestech.com> Cc: KC Lin <kclin@andestech.com> Cc: Alan Kao <alankao@andestech.com>
2019-11-14 05:52:27 +00:00
blt t0, t1, clbss_l
riscv: cpu: Add nx25 to support RISC-V Add Andes nx25 cpu core (called AndesStar V5) to support RISC-V arch Verifications: 1. startup and relocation ok. 2. boot from rom or ram both ok. 2. timer driver ok. 3. uart driver ok 4. mmc driver ok 5. spi driver ok. 6. 32/64 bit both ok. Detail verification message please see doc/README.ae250. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Signed-off-by: Greentime Hu <green.hu@gmail.com> Cc: Padmarao Begari <Padmarao.Begari@microsemi.com>
2017-12-26 05:55:48 +00:00
riscv: add support for multi-hart systems On RISC-V, all harts boot independently. To be able to run on a multi-hart system, U-Boot must be extended with the functionality to manage all harts in the system. All harts entering U-Boot are registered in the available_harts mask stored in global data. A hart lottery system as used in the Linux kernel selects the hart U-Boot runs on. All other harts are halted. U-Boot can delegate functions to them using smp_call_function(). Every hart has a valid pointer to the global data structure and a 8KiB stack by default. The stack size is set with CONFIG_STACK_SIZE_SHIFT. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-03-17 18:28:37 +00:00
relocate_secondary_harts:
riscv: Introduce SPL_SMP Kconfig option for U-Boot SPL With SBI v0.2 HSM extension, only a single hart need to boot and enter operating system. The booting hart can bring up secondary harts one by one afterwards. For U-Boot running in SPL, SMP can be turned on, while in U-Boot proper, SMP can be optionally turned off if using SBI v0.2 HSM. Introduce a new SPL_SMP Kconfig option to support this. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Atish Patra <atish.patra@wdc.com>
2020-04-16 15:09:30 +00:00
#if CONFIG_IS_ENABLED(SMP)
riscv: add support for multi-hart systems On RISC-V, all harts boot independently. To be able to run on a multi-hart system, U-Boot must be extended with the functionality to manage all harts in the system. All harts entering U-Boot are registered in the available_harts mask stored in global data. A hart lottery system as used in the Linux kernel selects the hart U-Boot runs on. All other harts are halted. U-Boot can delegate functions to them using smp_call_function(). Every hart has a valid pointer to the global data structure and a 8KiB stack by default. The stack size is set with CONFIG_STACK_SIZE_SHIFT. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-03-17 18:28:37 +00:00
/* send relocation IPI */
la t0, secondary_hart_relocate
add a0, t0, t6
/* store relocation offset */
mv s5, t6
mv a1, s2
mv a2, s3
riscv: add option to wait for ack from secondary harts in smp functions Add a wait option to smp_call_function() to wait for the secondary harts to acknowledge the call-function request. The request is considered to be acknowledged once each secondary hart has cleared the corresponding IPI. As part of the call-function request, the secondary harts invalidate the instruction cache after clearing the IPI. This adds a delay between acknowledgment (clear IPI) and fulfillment (call function) of the request. We want to use the acknowledgment to be able to judge when the request has been completed. Remove the delay by clearing the IPI after cache invalidation and just before calling the function from the request. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Rick Chen <rick@andestech.com> Tested-by: Rick Chen <rick@andestech.com> Reviewed-by: Anup Patel <anup.patel@wdc.com>
2019-12-08 22:28:51 +00:00
mv a3, zero
riscv: add support for multi-hart systems On RISC-V, all harts boot independently. To be able to run on a multi-hart system, U-Boot must be extended with the functionality to manage all harts in the system. All harts entering U-Boot are registered in the available_harts mask stored in global data. A hart lottery system as used in the Linux kernel selects the hart U-Boot runs on. All other harts are halted. U-Boot can delegate functions to them using smp_call_function(). Every hart has a valid pointer to the global data structure and a 8KiB stack by default. The stack size is set with CONFIG_STACK_SIZE_SHIFT. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-03-17 18:28:37 +00:00
jal smp_call_function
riscv: hang if relocation of secondary harts fails Print an error message and hang if smp_call_function() returns an error, indicating that relocation of the secondary harts has failed. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Anup Patel <anup.patel@wdc.com>
2019-03-17 18:28:40 +00:00
/* hang if relocation of secondary harts has failed */
beqz a0, 1f
mv a1, a0
la a0, secondary_harts_relocation_error
jal printf
jal hang
riscv: add support for multi-hart systems On RISC-V, all harts boot independently. To be able to run on a multi-hart system, U-Boot must be extended with the functionality to manage all harts in the system. All harts entering U-Boot are registered in the available_harts mask stored in global data. A hart lottery system as used in the Linux kernel selects the hart U-Boot runs on. All other harts are halted. U-Boot can delegate functions to them using smp_call_function(). Every hart has a valid pointer to the global data structure and a 8KiB stack by default. The stack size is set with CONFIG_STACK_SIZE_SHIFT. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-03-17 18:28:37 +00:00
/* restore relocation offset */
riscv: hang if relocation of secondary harts fails Print an error message and hang if smp_call_function() returns an error, indicating that relocation of the secondary harts has failed. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Anup Patel <anup.patel@wdc.com>
2019-03-17 18:28:40 +00:00
1: mv t6, s5
riscv: add support for multi-hart systems On RISC-V, all harts boot independently. To be able to run on a multi-hart system, U-Boot must be extended with the functionality to manage all harts in the system. All harts entering U-Boot are registered in the available_harts mask stored in global data. A hart lottery system as used in the Linux kernel selects the hart U-Boot runs on. All other harts are halted. U-Boot can delegate functions to them using smp_call_function(). Every hart has a valid pointer to the global data structure and a 8KiB stack by default. The stack size is set with CONFIG_STACK_SIZE_SHIFT. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-03-17 18:28:37 +00:00
#endif
riscv: cpu: Add nx25 to support RISC-V Add Andes nx25 cpu core (called AndesStar V5) to support RISC-V arch Verifications: 1. startup and relocation ok. 2. boot from rom or ram both ok. 2. timer driver ok. 3. uart driver ok 4. mmc driver ok 5. spi driver ok. 6. 32/64 bit both ok. Detail verification message please see doc/README.ae250. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Signed-off-by: Greentime Hu <green.hu@gmail.com> Cc: Padmarao Begari <Padmarao.Begari@microsemi.com>
2017-12-26 05:55:48 +00:00
/*
* We are done. Do not return, instead branch to second part of board
* initialization, now running from RAM.
*/
call_board_init_r:
riscv: cache: Implement i/dcache [status, enable, disable] AndeStar RISC-V(V5) provide mcache_ctl register which can configure I/D cache as enabled or disabled. This CSR will be encapsulated by CONFIG_RISCV_NDS. If you want to configure cache on AndeStar V5 AE350 platform. YOu can enable [*] AndeStar V5 ISA support by make menuconfig. This approach also provide the expansion when the vender specific features are going to join in. Signed-off-by: Rick Chen <rick@andestech.com> Cc: Greentime Hu <greentime@andestech.com>
2018-11-07 01:34:06 +00:00
jal invalidate_icache_all
jal flush_dcache_all
riscv: Remove unnecessary instruction The add instruction on risc-v can have any three sources and targets, so there is no need for an intermediate mov. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-01-27 21:39:44 +00:00
la t0, board_init_r /* offset of board_init_r() */
add t4, t0, t6 /* real address of board_init_r() */
riscv: cpu: Add nx25 to support RISC-V Add Andes nx25 cpu core (called AndesStar V5) to support RISC-V arch Verifications: 1. startup and relocation ok. 2. boot from rom or ram both ok. 2. timer driver ok. 3. uart driver ok 4. mmc driver ok 5. spi driver ok. 6. 32/64 bit both ok. Detail verification message please see doc/README.ae250. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Signed-off-by: Greentime Hu <green.hu@gmail.com> Cc: Padmarao Begari <Padmarao.Begari@microsemi.com>
2017-12-26 05:55:48 +00:00
/*
* setup parameters for board_init_r
*/
riscv: fix inconsistent use of spaces and tabs in start.S start.S uses both tabs and spaces after instructions. Fix this by only using tabs after instructions. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2018-11-22 10:26:24 +00:00
mv a0, s3 /* gd_t */
mv a1, s4 /* dest_addr */
riscv: cpu: Add nx25 to support RISC-V Add Andes nx25 cpu core (called AndesStar V5) to support RISC-V arch Verifications: 1. startup and relocation ok. 2. boot from rom or ram both ok. 2. timer driver ok. 3. uart driver ok 4. mmc driver ok 5. spi driver ok. 6. 32/64 bit both ok. Detail verification message please see doc/README.ae250. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Signed-off-by: Greentime Hu <green.hu@gmail.com> Cc: Padmarao Begari <Padmarao.Begari@microsemi.com>
2017-12-26 05:55:48 +00:00
/*
* jump to it ...
*/
riscv: fix inconsistent use of spaces and tabs in start.S start.S uses both tabs and spaces after instructions. Fix this by only using tabs after instructions. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2018-11-22 10:26:24 +00:00
jr t4 /* jump to board_init_r() */
riscv: add support for multi-hart systems On RISC-V, all harts boot independently. To be able to run on a multi-hart system, U-Boot must be extended with the functionality to manage all harts in the system. All harts entering U-Boot are registered in the available_harts mask stored in global data. A hart lottery system as used in the Linux kernel selects the hart U-Boot runs on. All other harts are halted. U-Boot can delegate functions to them using smp_call_function(). Every hart has a valid pointer to the global data structure and a 8KiB stack by default. The stack size is set with CONFIG_STACK_SIZE_SHIFT. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-03-17 18:28:37 +00:00
riscv: Introduce SPL_SMP Kconfig option for U-Boot SPL With SBI v0.2 HSM extension, only a single hart need to boot and enter operating system. The booting hart can bring up secondary harts one by one afterwards. For U-Boot running in SPL, SMP can be turned on, while in U-Boot proper, SMP can be optionally turned off if using SBI v0.2 HSM. Introduce a new SPL_SMP Kconfig option to support this. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Atish Patra <atish.patra@wdc.com>
2020-04-16 15:09:30 +00:00
#if CONFIG_IS_ENABLED(SMP)
riscv: add support for multi-hart systems On RISC-V, all harts boot independently. To be able to run on a multi-hart system, U-Boot must be extended with the functionality to manage all harts in the system. All harts entering U-Boot are registered in the available_harts mask stored in global data. A hart lottery system as used in the Linux kernel selects the hart U-Boot runs on. All other harts are halted. U-Boot can delegate functions to them using smp_call_function(). Every hart has a valid pointer to the global data structure and a 8KiB stack by default. The stack size is set with CONFIG_STACK_SIZE_SHIFT. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-03-17 18:28:37 +00:00
hart_out_of_bounds_loop:
/* Harts in this loop are out of bounds, increase CONFIG_NR_CPUS. */
wfi
j hart_out_of_bounds_loop
/* SMP relocation entry */
secondary_hart_relocate:
/* a1: new sp */
/* a2: new gd */
/* tp: hart id */
/* setup stack */
slli t0, tp, CONFIG_STACK_SIZE_SHIFT
sub sp, a1, t0
/* update global data pointer */
mv gp, a2
#endif
riscv: Add some comments to start.S This adds comments regarding the ordering and purpose of certain instructions as I understand them. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Leo Liang <ycliang@andestech.com>
2020-09-21 11:51:41 +00:00
/*
* Interrupts are disabled globally, but they can still be read from m/sip. The
* wfi function will wake us up if we get an IPI, even if we do not trap.
*/
riscv: add support for multi-hart systems On RISC-V, all harts boot independently. To be able to run on a multi-hart system, U-Boot must be extended with the functionality to manage all harts in the system. All harts entering U-Boot are registered in the available_harts mask stored in global data. A hart lottery system as used in the Linux kernel selects the hart U-Boot runs on. All other harts are halted. U-Boot can delegate functions to them using smp_call_function(). Every hart has a valid pointer to the global data structure and a 8KiB stack by default. The stack size is set with CONFIG_STACK_SIZE_SHIFT. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-03-17 18:28:37 +00:00
secondary_hart_loop:
wfi
riscv: Introduce SPL_SMP Kconfig option for U-Boot SPL With SBI v0.2 HSM extension, only a single hart need to boot and enter operating system. The booting hart can bring up secondary harts one by one afterwards. For U-Boot running in SPL, SMP can be turned on, while in U-Boot proper, SMP can be optionally turned off if using SBI v0.2 HSM. Introduce a new SPL_SMP Kconfig option to support this. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Atish Patra <atish.patra@wdc.com>
2020-04-16 15:09:30 +00:00
#if CONFIG_IS_ENABLED(SMP)
riscv: add support for multi-hart systems On RISC-V, all harts boot independently. To be able to run on a multi-hart system, U-Boot must be extended with the functionality to manage all harts in the system. All harts entering U-Boot are registered in the available_harts mask stored in global data. A hart lottery system as used in the Linux kernel selects the hart U-Boot runs on. All other harts are halted. U-Boot can delegate functions to them using smp_call_function(). Every hart has a valid pointer to the global data structure and a 8KiB stack by default. The stack size is set with CONFIG_STACK_SIZE_SHIFT. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-03-17 18:28:37 +00:00
csrr t0, MODE_PREFIX(ip)
riscv: add run mode configuration for SPL U-Boot SPL can be run in a different privilege mode from U-Boot proper. Add new configuration entries for SPL to allow the run mode to be configured independently of U-Boot proper. Extend all uses of the CONFIG_RISCV_SMODE and CONFIG_RISCV_MMODE configuration symbols to also cover the SPL equivalents. Ensure that files compatible with only one privilege mode are not included in builds targeting an incompatible privilege mode. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Anup Patel <anup.patel@wdc.com>
2019-08-21 19:14:43 +00:00
#if CONFIG_IS_ENABLED(RISCV_MMODE)
riscv: add support for multi-hart systems On RISC-V, all harts boot independently. To be able to run on a multi-hart system, U-Boot must be extended with the functionality to manage all harts in the system. All harts entering U-Boot are registered in the available_harts mask stored in global data. A hart lottery system as used in the Linux kernel selects the hart U-Boot runs on. All other harts are halted. U-Boot can delegate functions to them using smp_call_function(). Every hart has a valid pointer to the global data structure and a 8KiB stack by default. The stack size is set with CONFIG_STACK_SIZE_SHIFT. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-03-17 18:28:37 +00:00
andi t0, t0, MIE_MSIE
#else
andi t0, t0, SIE_SSIE
#endif
beqz t0, secondary_hart_loop
mv a0, tp
jal handle_ipi
#endif
j secondary_hart_loop
Reference in a new issue Copy permalink