u-boot/arch/arm/mach-k3/j721e_init.c

397 lines
10 KiB
C
Raw Normal View History

arm: K3: j721e: Add basic support for J721E SoC definition The J721E SoC belongs to the K3 Multicore SoC architecture platform, providing advanced system integration to enable lower system costs of automotive applications such as infotainment, cluster, premium Audio, Gateway, industrial and a range of broad market applications. This SoC is designed around reducing the system cost by eliminating the need of an external system MCU and is targeted towards ASIL-B/C certification/requirements in addition to allowing complex software and system use-cases. Some highlights of this SoC are: * Dual Cortex-A72s in a single cluster, three clusters of lockstep capable dual Cortex-R5F MCUs, Deep-learning Matrix Multiply Accelerator(MMA), C7x floating point Vector DSP, Two C66x floating point DSPs. * 3D GPU PowerVR Rogue 8XE GE8430 * Vision Processing Accelerator (VPAC) with image signal processor and Depth and Motion Processing Accelerator (DMPAC) * Two Gigabit Industrial Communication Subsystems (ICSSG), each with dual PRUs and dual RTUs * Two CSI2.0 4L RX plus one CSI2.0 4L TX, one eDP/DP, One DSI Tx, and up to two DPI interfaces. * Integrated Ethernet switch supporting up to a total of 8 external ports in addition to legacy Ethernet switch of up to 2 ports. * System MMU (SMMU) Version 3.0 and advanced virtualisation capabilities. * Upto 4 PCIe-GEN3 controllers, 2 USB3.0 Dual-role device subsystems, 16 MCANs, 12 McASP, eMMC and SD, UFS, OSPI/HyperBus memory controller, QSPI, I3C and I2C, eCAP/eQEP, eHRPWM, MLB among other peripherals. * Two hardware accelerator block containing AES/DES/SHA/MD5 called SA2UL management. * Configurable L3 Cache and IO-coherent architecture with high data throughput capable distributed DMA architecture under NAVSS * Centralized System Controller for Security, Power, and Resource Management (DMSC) See J721E Technical Reference Manual (SPRUIL1, May 2019) for further details: http://www.ti.com/lit/pdf/spruil1 Add base support for J721E SoC Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com>
2019-06-13 04:59:42 +00:00
// SPDX-License-Identifier: GPL-2.0+
/*
* J721E: SoC specific initialization
*
* Copyright (C) 2018-2019 Texas Instruments Incorporated - http://www.ti.com/
* Lokesh Vutla <lokeshvutla@ti.com>
*/
#include <common.h>
#include <init.h>
arm: K3: j721e: Add basic support for J721E SoC definition The J721E SoC belongs to the K3 Multicore SoC architecture platform, providing advanced system integration to enable lower system costs of automotive applications such as infotainment, cluster, premium Audio, Gateway, industrial and a range of broad market applications. This SoC is designed around reducing the system cost by eliminating the need of an external system MCU and is targeted towards ASIL-B/C certification/requirements in addition to allowing complex software and system use-cases. Some highlights of this SoC are: * Dual Cortex-A72s in a single cluster, three clusters of lockstep capable dual Cortex-R5F MCUs, Deep-learning Matrix Multiply Accelerator(MMA), C7x floating point Vector DSP, Two C66x floating point DSPs. * 3D GPU PowerVR Rogue 8XE GE8430 * Vision Processing Accelerator (VPAC) with image signal processor and Depth and Motion Processing Accelerator (DMPAC) * Two Gigabit Industrial Communication Subsystems (ICSSG), each with dual PRUs and dual RTUs * Two CSI2.0 4L RX plus one CSI2.0 4L TX, one eDP/DP, One DSI Tx, and up to two DPI interfaces. * Integrated Ethernet switch supporting up to a total of 8 external ports in addition to legacy Ethernet switch of up to 2 ports. * System MMU (SMMU) Version 3.0 and advanced virtualisation capabilities. * Upto 4 PCIe-GEN3 controllers, 2 USB3.0 Dual-role device subsystems, 16 MCANs, 12 McASP, eMMC and SD, UFS, OSPI/HyperBus memory controller, QSPI, I3C and I2C, eCAP/eQEP, eHRPWM, MLB among other peripherals. * Two hardware accelerator block containing AES/DES/SHA/MD5 called SA2UL management. * Configurable L3 Cache and IO-coherent architecture with high data throughput capable distributed DMA architecture under NAVSS * Centralized System Controller for Security, Power, and Resource Management (DMSC) See J721E Technical Reference Manual (SPRUIL1, May 2019) for further details: http://www.ti.com/lit/pdf/spruil1 Add base support for J721E SoC Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com>
2019-06-13 04:59:42 +00:00
#include <spl.h>
#include <asm/io.h>
#include <asm/armv7_mpu.h>
#include <asm/arch/hardware.h>
#include <asm/arch/sysfw-loader.h>
arm: K3: j721e: Add basic support for J721E SoC definition The J721E SoC belongs to the K3 Multicore SoC architecture platform, providing advanced system integration to enable lower system costs of automotive applications such as infotainment, cluster, premium Audio, Gateway, industrial and a range of broad market applications. This SoC is designed around reducing the system cost by eliminating the need of an external system MCU and is targeted towards ASIL-B/C certification/requirements in addition to allowing complex software and system use-cases. Some highlights of this SoC are: * Dual Cortex-A72s in a single cluster, three clusters of lockstep capable dual Cortex-R5F MCUs, Deep-learning Matrix Multiply Accelerator(MMA), C7x floating point Vector DSP, Two C66x floating point DSPs. * 3D GPU PowerVR Rogue 8XE GE8430 * Vision Processing Accelerator (VPAC) with image signal processor and Depth and Motion Processing Accelerator (DMPAC) * Two Gigabit Industrial Communication Subsystems (ICSSG), each with dual PRUs and dual RTUs * Two CSI2.0 4L RX plus one CSI2.0 4L TX, one eDP/DP, One DSI Tx, and up to two DPI interfaces. * Integrated Ethernet switch supporting up to a total of 8 external ports in addition to legacy Ethernet switch of up to 2 ports. * System MMU (SMMU) Version 3.0 and advanced virtualisation capabilities. * Upto 4 PCIe-GEN3 controllers, 2 USB3.0 Dual-role device subsystems, 16 MCANs, 12 McASP, eMMC and SD, UFS, OSPI/HyperBus memory controller, QSPI, I3C and I2C, eCAP/eQEP, eHRPWM, MLB among other peripherals. * Two hardware accelerator block containing AES/DES/SHA/MD5 called SA2UL management. * Configurable L3 Cache and IO-coherent architecture with high data throughput capable distributed DMA architecture under NAVSS * Centralized System Controller for Security, Power, and Resource Management (DMSC) See J721E Technical Reference Manual (SPRUIL1, May 2019) for further details: http://www.ti.com/lit/pdf/spruil1 Add base support for J721E SoC Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com>
2019-06-13 04:59:42 +00:00
#include "common.h"
#include <asm/arch/sys_proto.h>
#include <linux/soc/ti/ti_sci_protocol.h>
#include <dm.h>
#include <dm/uclass-internal.h>
#include <dm/pinctrl.h>
#include <mmc.h>
#include <remoteproc.h>
arm: K3: j721e: Add basic support for J721E SoC definition The J721E SoC belongs to the K3 Multicore SoC architecture platform, providing advanced system integration to enable lower system costs of automotive applications such as infotainment, cluster, premium Audio, Gateway, industrial and a range of broad market applications. This SoC is designed around reducing the system cost by eliminating the need of an external system MCU and is targeted towards ASIL-B/C certification/requirements in addition to allowing complex software and system use-cases. Some highlights of this SoC are: * Dual Cortex-A72s in a single cluster, three clusters of lockstep capable dual Cortex-R5F MCUs, Deep-learning Matrix Multiply Accelerator(MMA), C7x floating point Vector DSP, Two C66x floating point DSPs. * 3D GPU PowerVR Rogue 8XE GE8430 * Vision Processing Accelerator (VPAC) with image signal processor and Depth and Motion Processing Accelerator (DMPAC) * Two Gigabit Industrial Communication Subsystems (ICSSG), each with dual PRUs and dual RTUs * Two CSI2.0 4L RX plus one CSI2.0 4L TX, one eDP/DP, One DSI Tx, and up to two DPI interfaces. * Integrated Ethernet switch supporting up to a total of 8 external ports in addition to legacy Ethernet switch of up to 2 ports. * System MMU (SMMU) Version 3.0 and advanced virtualisation capabilities. * Upto 4 PCIe-GEN3 controllers, 2 USB3.0 Dual-role device subsystems, 16 MCANs, 12 McASP, eMMC and SD, UFS, OSPI/HyperBus memory controller, QSPI, I3C and I2C, eCAP/eQEP, eHRPWM, MLB among other peripherals. * Two hardware accelerator block containing AES/DES/SHA/MD5 called SA2UL management. * Configurable L3 Cache and IO-coherent architecture with high data throughput capable distributed DMA architecture under NAVSS * Centralized System Controller for Security, Power, and Resource Management (DMSC) See J721E Technical Reference Manual (SPRUIL1, May 2019) for further details: http://www.ti.com/lit/pdf/spruil1 Add base support for J721E SoC Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com>
2019-06-13 04:59:42 +00:00
#ifdef CONFIG_SPL_BUILD
#ifdef CONFIG_K3_LOAD_SYSFW
#ifdef CONFIG_TI_SECURE_DEVICE
struct fwl_data cbass_hc_cfg0_fwls[] = {
{ "PCIE0_CFG", 2560, 8 },
{ "PCIE1_CFG", 2561, 8 },
{ "USB3SS0_CORE", 2568, 4 },
{ "USB3SS1_CORE", 2570, 4 },
{ "EMMC8SS0_CFG", 2576, 4 },
{ "UFS_HCI0_CFG", 2580, 4 },
{ "SERDES0", 2584, 1 },
{ "SERDES1", 2585, 1 },
}, cbass_hc0_fwls[] = {
{ "PCIE0_HP", 2528, 24 },
{ "PCIE0_LP", 2529, 24 },
{ "PCIE1_HP", 2530, 24 },
{ "PCIE1_LP", 2531, 24 },
}, cbass_rc_cfg0_fwls[] = {
{ "EMMCSD4SS0_CFG", 2380, 4 },
}, cbass_rc0_fwls[] = {
{ "GPMC0", 2310, 8 },
}, infra_cbass0_fwls[] = {
{ "PLL_MMR0", 8, 26 },
{ "CTRL_MMR0", 9, 16 },
}, mcu_cbass0_fwls[] = {
{ "MCU_R5FSS0_CORE0", 1024, 4 },
{ "MCU_R5FSS0_CORE0_CFG", 1025, 2 },
{ "MCU_R5FSS0_CORE1", 1028, 4 },
{ "MCU_FSS0_CFG", 1032, 12 },
{ "MCU_FSS0_S1", 1033, 8 },
{ "MCU_FSS0_S0", 1036, 8 },
{ "MCU_PSROM49152X32", 1048, 1 },
{ "MCU_MSRAM128KX64", 1050, 8 },
{ "MCU_CTRL_MMR0", 1200, 8 },
{ "MCU_PLL_MMR0", 1201, 3 },
{ "MCU_CPSW0", 1220, 2 },
}, wkup_cbass0_fwls[] = {
{ "WKUP_CTRL_MMR0", 131, 16 },
};
#endif
#endif
static void ctrl_mmr_unlock(void)
{
/* Unlock all WKUP_CTRL_MMR0 module registers */
mmr_unlock(WKUP_CTRL_MMR0_BASE, 0);
mmr_unlock(WKUP_CTRL_MMR0_BASE, 1);
mmr_unlock(WKUP_CTRL_MMR0_BASE, 2);
mmr_unlock(WKUP_CTRL_MMR0_BASE, 3);
mmr_unlock(WKUP_CTRL_MMR0_BASE, 4);
mmr_unlock(WKUP_CTRL_MMR0_BASE, 6);
mmr_unlock(WKUP_CTRL_MMR0_BASE, 7);
/* Unlock all MCU_CTRL_MMR0 module registers */
mmr_unlock(MCU_CTRL_MMR0_BASE, 0);
mmr_unlock(MCU_CTRL_MMR0_BASE, 1);
mmr_unlock(MCU_CTRL_MMR0_BASE, 2);
mmr_unlock(MCU_CTRL_MMR0_BASE, 3);
mmr_unlock(MCU_CTRL_MMR0_BASE, 4);
/* Unlock all CTRL_MMR0 module registers */
mmr_unlock(CTRL_MMR0_BASE, 0);
mmr_unlock(CTRL_MMR0_BASE, 1);
mmr_unlock(CTRL_MMR0_BASE, 2);
mmr_unlock(CTRL_MMR0_BASE, 3);
mmr_unlock(CTRL_MMR0_BASE, 5);
if (soc_is_j721e())
mmr_unlock(CTRL_MMR0_BASE, 6);
mmr_unlock(CTRL_MMR0_BASE, 7);
}
#if defined(CONFIG_K3_LOAD_SYSFW)
void k3_mmc_stop_clock(void)
{
if (spl_boot_device() == BOOT_DEVICE_MMC1) {
struct mmc *mmc = find_mmc_device(0);
if (!mmc)
return;
mmc->saved_clock = mmc->clock;
mmc_set_clock(mmc, 0, true);
}
}
void k3_mmc_restart_clock(void)
{
if (spl_boot_device() == BOOT_DEVICE_MMC1) {
struct mmc *mmc = find_mmc_device(0);
if (!mmc)
return;
mmc_set_clock(mmc, mmc->saved_clock, false);
}
}
#endif
/*
* This uninitialized global variable would normal end up in the .bss section,
* but the .bss is cleared between writing and reading this variable, so move
* it to the .data section.
*/
u32 bootindex __attribute__((section(".data")));
static struct rom_extended_boot_data bootdata __section(.data);
static void store_boot_info_from_rom(void)
{
bootindex = *(u32 *)(CONFIG_SYS_K3_BOOT_PARAM_TABLE_INDEX);
memcpy(&bootdata, (uintptr_t *)ROM_ENTENDED_BOOT_DATA_INFO,
sizeof(struct rom_extended_boot_data));
}
arm: K3: j721e: Add basic support for J721E SoC definition The J721E SoC belongs to the K3 Multicore SoC architecture platform, providing advanced system integration to enable lower system costs of automotive applications such as infotainment, cluster, premium Audio, Gateway, industrial and a range of broad market applications. This SoC is designed around reducing the system cost by eliminating the need of an external system MCU and is targeted towards ASIL-B/C certification/requirements in addition to allowing complex software and system use-cases. Some highlights of this SoC are: * Dual Cortex-A72s in a single cluster, three clusters of lockstep capable dual Cortex-R5F MCUs, Deep-learning Matrix Multiply Accelerator(MMA), C7x floating point Vector DSP, Two C66x floating point DSPs. * 3D GPU PowerVR Rogue 8XE GE8430 * Vision Processing Accelerator (VPAC) with image signal processor and Depth and Motion Processing Accelerator (DMPAC) * Two Gigabit Industrial Communication Subsystems (ICSSG), each with dual PRUs and dual RTUs * Two CSI2.0 4L RX plus one CSI2.0 4L TX, one eDP/DP, One DSI Tx, and up to two DPI interfaces. * Integrated Ethernet switch supporting up to a total of 8 external ports in addition to legacy Ethernet switch of up to 2 ports. * System MMU (SMMU) Version 3.0 and advanced virtualisation capabilities. * Upto 4 PCIe-GEN3 controllers, 2 USB3.0 Dual-role device subsystems, 16 MCANs, 12 McASP, eMMC and SD, UFS, OSPI/HyperBus memory controller, QSPI, I3C and I2C, eCAP/eQEP, eHRPWM, MLB among other peripherals. * Two hardware accelerator block containing AES/DES/SHA/MD5 called SA2UL management. * Configurable L3 Cache and IO-coherent architecture with high data throughput capable distributed DMA architecture under NAVSS * Centralized System Controller for Security, Power, and Resource Management (DMSC) See J721E Technical Reference Manual (SPRUIL1, May 2019) for further details: http://www.ti.com/lit/pdf/spruil1 Add base support for J721E SoC Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com>
2019-06-13 04:59:42 +00:00
void board_init_f(ulong dummy)
{
#if defined(CONFIG_K3_J721E_DDRSS) || defined(CONFIG_K3_LOAD_SYSFW)
struct udevice *dev;
int ret;
#endif
arm: K3: j721e: Add basic support for J721E SoC definition The J721E SoC belongs to the K3 Multicore SoC architecture platform, providing advanced system integration to enable lower system costs of automotive applications such as infotainment, cluster, premium Audio, Gateway, industrial and a range of broad market applications. This SoC is designed around reducing the system cost by eliminating the need of an external system MCU and is targeted towards ASIL-B/C certification/requirements in addition to allowing complex software and system use-cases. Some highlights of this SoC are: * Dual Cortex-A72s in a single cluster, three clusters of lockstep capable dual Cortex-R5F MCUs, Deep-learning Matrix Multiply Accelerator(MMA), C7x floating point Vector DSP, Two C66x floating point DSPs. * 3D GPU PowerVR Rogue 8XE GE8430 * Vision Processing Accelerator (VPAC) with image signal processor and Depth and Motion Processing Accelerator (DMPAC) * Two Gigabit Industrial Communication Subsystems (ICSSG), each with dual PRUs and dual RTUs * Two CSI2.0 4L RX plus one CSI2.0 4L TX, one eDP/DP, One DSI Tx, and up to two DPI interfaces. * Integrated Ethernet switch supporting up to a total of 8 external ports in addition to legacy Ethernet switch of up to 2 ports. * System MMU (SMMU) Version 3.0 and advanced virtualisation capabilities. * Upto 4 PCIe-GEN3 controllers, 2 USB3.0 Dual-role device subsystems, 16 MCANs, 12 McASP, eMMC and SD, UFS, OSPI/HyperBus memory controller, QSPI, I3C and I2C, eCAP/eQEP, eHRPWM, MLB among other peripherals. * Two hardware accelerator block containing AES/DES/SHA/MD5 called SA2UL management. * Configurable L3 Cache and IO-coherent architecture with high data throughput capable distributed DMA architecture under NAVSS * Centralized System Controller for Security, Power, and Resource Management (DMSC) See J721E Technical Reference Manual (SPRUIL1, May 2019) for further details: http://www.ti.com/lit/pdf/spruil1 Add base support for J721E SoC Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com>
2019-06-13 04:59:42 +00:00
/*
* Cannot delay this further as there is a chance that
* K3_BOOT_PARAM_TABLE_INDEX can be over written by SPL MALLOC section.
arm: K3: j721e: Add basic support for J721E SoC definition The J721E SoC belongs to the K3 Multicore SoC architecture platform, providing advanced system integration to enable lower system costs of automotive applications such as infotainment, cluster, premium Audio, Gateway, industrial and a range of broad market applications. This SoC is designed around reducing the system cost by eliminating the need of an external system MCU and is targeted towards ASIL-B/C certification/requirements in addition to allowing complex software and system use-cases. Some highlights of this SoC are: * Dual Cortex-A72s in a single cluster, three clusters of lockstep capable dual Cortex-R5F MCUs, Deep-learning Matrix Multiply Accelerator(MMA), C7x floating point Vector DSP, Two C66x floating point DSPs. * 3D GPU PowerVR Rogue 8XE GE8430 * Vision Processing Accelerator (VPAC) with image signal processor and Depth and Motion Processing Accelerator (DMPAC) * Two Gigabit Industrial Communication Subsystems (ICSSG), each with dual PRUs and dual RTUs * Two CSI2.0 4L RX plus one CSI2.0 4L TX, one eDP/DP, One DSI Tx, and up to two DPI interfaces. * Integrated Ethernet switch supporting up to a total of 8 external ports in addition to legacy Ethernet switch of up to 2 ports. * System MMU (SMMU) Version 3.0 and advanced virtualisation capabilities. * Upto 4 PCIe-GEN3 controllers, 2 USB3.0 Dual-role device subsystems, 16 MCANs, 12 McASP, eMMC and SD, UFS, OSPI/HyperBus memory controller, QSPI, I3C and I2C, eCAP/eQEP, eHRPWM, MLB among other peripherals. * Two hardware accelerator block containing AES/DES/SHA/MD5 called SA2UL management. * Configurable L3 Cache and IO-coherent architecture with high data throughput capable distributed DMA architecture under NAVSS * Centralized System Controller for Security, Power, and Resource Management (DMSC) See J721E Technical Reference Manual (SPRUIL1, May 2019) for further details: http://www.ti.com/lit/pdf/spruil1 Add base support for J721E SoC Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com>
2019-06-13 04:59:42 +00:00
*/
store_boot_info_from_rom();
arm: K3: j721e: Add basic support for J721E SoC definition The J721E SoC belongs to the K3 Multicore SoC architecture platform, providing advanced system integration to enable lower system costs of automotive applications such as infotainment, cluster, premium Audio, Gateway, industrial and a range of broad market applications. This SoC is designed around reducing the system cost by eliminating the need of an external system MCU and is targeted towards ASIL-B/C certification/requirements in addition to allowing complex software and system use-cases. Some highlights of this SoC are: * Dual Cortex-A72s in a single cluster, three clusters of lockstep capable dual Cortex-R5F MCUs, Deep-learning Matrix Multiply Accelerator(MMA), C7x floating point Vector DSP, Two C66x floating point DSPs. * 3D GPU PowerVR Rogue 8XE GE8430 * Vision Processing Accelerator (VPAC) with image signal processor and Depth and Motion Processing Accelerator (DMPAC) * Two Gigabit Industrial Communication Subsystems (ICSSG), each with dual PRUs and dual RTUs * Two CSI2.0 4L RX plus one CSI2.0 4L TX, one eDP/DP, One DSI Tx, and up to two DPI interfaces. * Integrated Ethernet switch supporting up to a total of 8 external ports in addition to legacy Ethernet switch of up to 2 ports. * System MMU (SMMU) Version 3.0 and advanced virtualisation capabilities. * Upto 4 PCIe-GEN3 controllers, 2 USB3.0 Dual-role device subsystems, 16 MCANs, 12 McASP, eMMC and SD, UFS, OSPI/HyperBus memory controller, QSPI, I3C and I2C, eCAP/eQEP, eHRPWM, MLB among other peripherals. * Two hardware accelerator block containing AES/DES/SHA/MD5 called SA2UL management. * Configurable L3 Cache and IO-coherent architecture with high data throughput capable distributed DMA architecture under NAVSS * Centralized System Controller for Security, Power, and Resource Management (DMSC) See J721E Technical Reference Manual (SPRUIL1, May 2019) for further details: http://www.ti.com/lit/pdf/spruil1 Add base support for J721E SoC Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com>
2019-06-13 04:59:42 +00:00
/* Make all control module registers accessible */
ctrl_mmr_unlock();
arm: K3: j721e: Add basic support for J721E SoC definition The J721E SoC belongs to the K3 Multicore SoC architecture platform, providing advanced system integration to enable lower system costs of automotive applications such as infotainment, cluster, premium Audio, Gateway, industrial and a range of broad market applications. This SoC is designed around reducing the system cost by eliminating the need of an external system MCU and is targeted towards ASIL-B/C certification/requirements in addition to allowing complex software and system use-cases. Some highlights of this SoC are: * Dual Cortex-A72s in a single cluster, three clusters of lockstep capable dual Cortex-R5F MCUs, Deep-learning Matrix Multiply Accelerator(MMA), C7x floating point Vector DSP, Two C66x floating point DSPs. * 3D GPU PowerVR Rogue 8XE GE8430 * Vision Processing Accelerator (VPAC) with image signal processor and Depth and Motion Processing Accelerator (DMPAC) * Two Gigabit Industrial Communication Subsystems (ICSSG), each with dual PRUs and dual RTUs * Two CSI2.0 4L RX plus one CSI2.0 4L TX, one eDP/DP, One DSI Tx, and up to two DPI interfaces. * Integrated Ethernet switch supporting up to a total of 8 external ports in addition to legacy Ethernet switch of up to 2 ports. * System MMU (SMMU) Version 3.0 and advanced virtualisation capabilities. * Upto 4 PCIe-GEN3 controllers, 2 USB3.0 Dual-role device subsystems, 16 MCANs, 12 McASP, eMMC and SD, UFS, OSPI/HyperBus memory controller, QSPI, I3C and I2C, eCAP/eQEP, eHRPWM, MLB among other peripherals. * Two hardware accelerator block containing AES/DES/SHA/MD5 called SA2UL management. * Configurable L3 Cache and IO-coherent architecture with high data throughput capable distributed DMA architecture under NAVSS * Centralized System Controller for Security, Power, and Resource Management (DMSC) See J721E Technical Reference Manual (SPRUIL1, May 2019) for further details: http://www.ti.com/lit/pdf/spruil1 Add base support for J721E SoC Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com>
2019-06-13 04:59:42 +00:00
#ifdef CONFIG_CPU_V7R
disable_linefill_optimization();
arm: K3: j721e: Add basic support for J721E SoC definition The J721E SoC belongs to the K3 Multicore SoC architecture platform, providing advanced system integration to enable lower system costs of automotive applications such as infotainment, cluster, premium Audio, Gateway, industrial and a range of broad market applications. This SoC is designed around reducing the system cost by eliminating the need of an external system MCU and is targeted towards ASIL-B/C certification/requirements in addition to allowing complex software and system use-cases. Some highlights of this SoC are: * Dual Cortex-A72s in a single cluster, three clusters of lockstep capable dual Cortex-R5F MCUs, Deep-learning Matrix Multiply Accelerator(MMA), C7x floating point Vector DSP, Two C66x floating point DSPs. * 3D GPU PowerVR Rogue 8XE GE8430 * Vision Processing Accelerator (VPAC) with image signal processor and Depth and Motion Processing Accelerator (DMPAC) * Two Gigabit Industrial Communication Subsystems (ICSSG), each with dual PRUs and dual RTUs * Two CSI2.0 4L RX plus one CSI2.0 4L TX, one eDP/DP, One DSI Tx, and up to two DPI interfaces. * Integrated Ethernet switch supporting up to a total of 8 external ports in addition to legacy Ethernet switch of up to 2 ports. * System MMU (SMMU) Version 3.0 and advanced virtualisation capabilities. * Upto 4 PCIe-GEN3 controllers, 2 USB3.0 Dual-role device subsystems, 16 MCANs, 12 McASP, eMMC and SD, UFS, OSPI/HyperBus memory controller, QSPI, I3C and I2C, eCAP/eQEP, eHRPWM, MLB among other peripherals. * Two hardware accelerator block containing AES/DES/SHA/MD5 called SA2UL management. * Configurable L3 Cache and IO-coherent architecture with high data throughput capable distributed DMA architecture under NAVSS * Centralized System Controller for Security, Power, and Resource Management (DMSC) See J721E Technical Reference Manual (SPRUIL1, May 2019) for further details: http://www.ti.com/lit/pdf/spruil1 Add base support for J721E SoC Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com>
2019-06-13 04:59:42 +00:00
setup_k3_mpu_regions();
#endif
/* Init DM early */
spl_early_init();
#ifdef CONFIG_K3_LOAD_SYSFW
/*
* Process pinctrl for the serial0 a.k.a. MCU_UART0 module and continue
* regardless of the result of pinctrl. Do this without probing the
* device, but instead by searching the device that would request the
* given sequence number if probed. The UART will be used by the system
* firmware (SYSFW) image for various purposes and SYSFW depends on us
* to initialize its pin settings.
*/
ret = uclass_find_device_by_seq(UCLASS_SERIAL, 0, &dev);
if (!ret)
pinctrl_select_state(dev, "default");
/*
* Load, start up, and configure system controller firmware. Provide
* the U-Boot console init function to the SYSFW post-PM configuration
* callback hook, effectively switching on (or over) the console
* output.
*/
k3_sysfw_loader(is_rom_loaded_sysfw(&bootdata),
k3_mmc_stop_clock, k3_mmc_restart_clock);
/* Prepare console output */
preloader_console_init();
/* Disable ROM configured firewalls right after loading sysfw */
#ifdef CONFIG_TI_SECURE_DEVICE
remove_fwl_configs(cbass_hc_cfg0_fwls, ARRAY_SIZE(cbass_hc_cfg0_fwls));
remove_fwl_configs(cbass_hc0_fwls, ARRAY_SIZE(cbass_hc0_fwls));
remove_fwl_configs(cbass_rc_cfg0_fwls, ARRAY_SIZE(cbass_rc_cfg0_fwls));
remove_fwl_configs(cbass_rc0_fwls, ARRAY_SIZE(cbass_rc0_fwls));
remove_fwl_configs(infra_cbass0_fwls, ARRAY_SIZE(infra_cbass0_fwls));
remove_fwl_configs(mcu_cbass0_fwls, ARRAY_SIZE(mcu_cbass0_fwls));
remove_fwl_configs(wkup_cbass0_fwls, ARRAY_SIZE(wkup_cbass0_fwls));
#endif
#else
arm: K3: j721e: Add basic support for J721E SoC definition The J721E SoC belongs to the K3 Multicore SoC architecture platform, providing advanced system integration to enable lower system costs of automotive applications such as infotainment, cluster, premium Audio, Gateway, industrial and a range of broad market applications. This SoC is designed around reducing the system cost by eliminating the need of an external system MCU and is targeted towards ASIL-B/C certification/requirements in addition to allowing complex software and system use-cases. Some highlights of this SoC are: * Dual Cortex-A72s in a single cluster, three clusters of lockstep capable dual Cortex-R5F MCUs, Deep-learning Matrix Multiply Accelerator(MMA), C7x floating point Vector DSP, Two C66x floating point DSPs. * 3D GPU PowerVR Rogue 8XE GE8430 * Vision Processing Accelerator (VPAC) with image signal processor and Depth and Motion Processing Accelerator (DMPAC) * Two Gigabit Industrial Communication Subsystems (ICSSG), each with dual PRUs and dual RTUs * Two CSI2.0 4L RX plus one CSI2.0 4L TX, one eDP/DP, One DSI Tx, and up to two DPI interfaces. * Integrated Ethernet switch supporting up to a total of 8 external ports in addition to legacy Ethernet switch of up to 2 ports. * System MMU (SMMU) Version 3.0 and advanced virtualisation capabilities. * Upto 4 PCIe-GEN3 controllers, 2 USB3.0 Dual-role device subsystems, 16 MCANs, 12 McASP, eMMC and SD, UFS, OSPI/HyperBus memory controller, QSPI, I3C and I2C, eCAP/eQEP, eHRPWM, MLB among other peripherals. * Two hardware accelerator block containing AES/DES/SHA/MD5 called SA2UL management. * Configurable L3 Cache and IO-coherent architecture with high data throughput capable distributed DMA architecture under NAVSS * Centralized System Controller for Security, Power, and Resource Management (DMSC) See J721E Technical Reference Manual (SPRUIL1, May 2019) for further details: http://www.ti.com/lit/pdf/spruil1 Add base support for J721E SoC Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com>
2019-06-13 04:59:42 +00:00
/* Prepare console output */
preloader_console_init();
#endif
/* Output System Firmware version info */
k3_sysfw_print_ver();
board: ti: j721e: Use EEPROM-based board detection The TI J721E EVM system on module (SOM), the common processor board, and the associated daughtercards have on-board I2C-based EEPROMs containing board config data. Use the board detection infrastructure to do the following: 1) Parse the J721E SOM EEPROM and populate items like board name, board HW and SW revision as well as board serial number into the TI common EEPROM data structure residing in SRAM scratch space 2) Check for presence of daughter card(s) by probing associated I2C addresses used for on-board EEPROMs containing daughter card-specific data. If such a card is found, parse the EEPROM data such as for additional Ethernet MAC addresses and populate those into U-Boot accordingly 3) Dynamically apply daughter card DTB overlays to the U-Boot (proper) DTB during SPL execution 4) Dynamically create an U-Boot ENV variable called name_overlays during U-Boot execution containing a list of daugherboard-specific DTB overlays based on daughercards found to be used during Kernel boot. This patch adds support for the J721E system on module boards containing the actual SoC ("J721EX-PM2-SOM", accessed via CONFIG_EEPROM_CHIP_ADDRESS), the common processor board ("J7X-BASE-CPB"), the Quad-Port Ethernet Expansion Board ("J7X-VSC8514-ETH"), the infotainment board ("J7X-INFOTAN-EXP") as well as for the gateway/Ethernet switch/industrial expansion board ("J7X-GESI-EXP"). Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-07 07:45:54 +00:00
/* Perform EEPROM-based board detection */
if (IS_ENABLED(CONFIG_TI_I2C_BOARD_DETECT))
do_board_detect();
board: ti: j721e: Use EEPROM-based board detection The TI J721E EVM system on module (SOM), the common processor board, and the associated daughtercards have on-board I2C-based EEPROMs containing board config data. Use the board detection infrastructure to do the following: 1) Parse the J721E SOM EEPROM and populate items like board name, board HW and SW revision as well as board serial number into the TI common EEPROM data structure residing in SRAM scratch space 2) Check for presence of daughter card(s) by probing associated I2C addresses used for on-board EEPROMs containing daughter card-specific data. If such a card is found, parse the EEPROM data such as for additional Ethernet MAC addresses and populate those into U-Boot accordingly 3) Dynamically apply daughter card DTB overlays to the U-Boot (proper) DTB during SPL execution 4) Dynamically create an U-Boot ENV variable called name_overlays during U-Boot execution containing a list of daugherboard-specific DTB overlays based on daughercards found to be used during Kernel boot. This patch adds support for the J721E system on module boards containing the actual SoC ("J721EX-PM2-SOM", accessed via CONFIG_EEPROM_CHIP_ADDRESS), the common processor board ("J7X-BASE-CPB"), the Quad-Port Ethernet Expansion Board ("J7X-VSC8514-ETH"), the infotainment board ("J7X-INFOTAN-EXP") as well as for the gateway/Ethernet switch/industrial expansion board ("J7X-GESI-EXP"). Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-07 07:45:54 +00:00
#if defined(CONFIG_CPU_V7R) && defined(CONFIG_K3_AVS0)
ret = uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(k3_avs),
&dev);
if (ret)
printf("AVS init failed: %d\n", ret);
#endif
#if defined(CONFIG_K3_J721E_DDRSS)
ret = uclass_get_device(UCLASS_RAM, 0, &dev);
if (ret)
panic("DRAM init failed: %d\n", ret);
#endif
spl_enable_dcache();
arm: K3: j721e: Add basic support for J721E SoC definition The J721E SoC belongs to the K3 Multicore SoC architecture platform, providing advanced system integration to enable lower system costs of automotive applications such as infotainment, cluster, premium Audio, Gateway, industrial and a range of broad market applications. This SoC is designed around reducing the system cost by eliminating the need of an external system MCU and is targeted towards ASIL-B/C certification/requirements in addition to allowing complex software and system use-cases. Some highlights of this SoC are: * Dual Cortex-A72s in a single cluster, three clusters of lockstep capable dual Cortex-R5F MCUs, Deep-learning Matrix Multiply Accelerator(MMA), C7x floating point Vector DSP, Two C66x floating point DSPs. * 3D GPU PowerVR Rogue 8XE GE8430 * Vision Processing Accelerator (VPAC) with image signal processor and Depth and Motion Processing Accelerator (DMPAC) * Two Gigabit Industrial Communication Subsystems (ICSSG), each with dual PRUs and dual RTUs * Two CSI2.0 4L RX plus one CSI2.0 4L TX, one eDP/DP, One DSI Tx, and up to two DPI interfaces. * Integrated Ethernet switch supporting up to a total of 8 external ports in addition to legacy Ethernet switch of up to 2 ports. * System MMU (SMMU) Version 3.0 and advanced virtualisation capabilities. * Upto 4 PCIe-GEN3 controllers, 2 USB3.0 Dual-role device subsystems, 16 MCANs, 12 McASP, eMMC and SD, UFS, OSPI/HyperBus memory controller, QSPI, I3C and I2C, eCAP/eQEP, eHRPWM, MLB among other peripherals. * Two hardware accelerator block containing AES/DES/SHA/MD5 called SA2UL management. * Configurable L3 Cache and IO-coherent architecture with high data throughput capable distributed DMA architecture under NAVSS * Centralized System Controller for Security, Power, and Resource Management (DMSC) See J721E Technical Reference Manual (SPRUIL1, May 2019) for further details: http://www.ti.com/lit/pdf/spruil1 Add base support for J721E SoC Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com>
2019-06-13 04:59:42 +00:00
}
u32 spl_mmc_boot_mode(const u32 boot_device)
{
switch (boot_device) {
case BOOT_DEVICE_MMC1:
return MMCSD_MODE_EMMCBOOT;
case BOOT_DEVICE_MMC2:
return MMCSD_MODE_FS;
default:
return MMCSD_MODE_RAW;
}
}
static u32 __get_backup_bootmedia(u32 main_devstat)
{
u32 bkup_boot = (main_devstat & MAIN_DEVSTAT_BKUP_BOOTMODE_MASK) >>
MAIN_DEVSTAT_BKUP_BOOTMODE_SHIFT;
switch (bkup_boot) {
case BACKUP_BOOT_DEVICE_USB:
return BOOT_DEVICE_DFU;
case BACKUP_BOOT_DEVICE_UART:
return BOOT_DEVICE_UART;
case BACKUP_BOOT_DEVICE_ETHERNET:
return BOOT_DEVICE_ETHERNET;
case BACKUP_BOOT_DEVICE_MMC2:
{
u32 port = (main_devstat & MAIN_DEVSTAT_BKUP_MMC_PORT_MASK) >>
MAIN_DEVSTAT_BKUP_MMC_PORT_SHIFT;
if (port == 0x0)
return BOOT_DEVICE_MMC1;
return BOOT_DEVICE_MMC2;
}
case BACKUP_BOOT_DEVICE_SPI:
return BOOT_DEVICE_SPI;
case BACKUP_BOOT_DEVICE_I2C:
return BOOT_DEVICE_I2C;
}
return BOOT_DEVICE_RAM;
}
static u32 __get_primary_bootmedia(u32 main_devstat, u32 wkup_devstat)
{
u32 bootmode = (wkup_devstat & WKUP_DEVSTAT_PRIMARY_BOOTMODE_MASK) >>
WKUP_DEVSTAT_PRIMARY_BOOTMODE_SHIFT;
bootmode |= (main_devstat & MAIN_DEVSTAT_BOOT_MODE_B_MASK) <<
BOOT_MODE_B_SHIFT;
if (bootmode == BOOT_DEVICE_OSPI || bootmode == BOOT_DEVICE_QSPI)
bootmode = BOOT_DEVICE_SPI;
if (bootmode == BOOT_DEVICE_MMC2) {
u32 port = (main_devstat &
MAIN_DEVSTAT_PRIM_BOOTMODE_MMC_PORT_MASK) >>
MAIN_DEVSTAT_PRIM_BOOTMODE_PORT_SHIFT;
if (port == 0x0)
bootmode = BOOT_DEVICE_MMC1;
}
return bootmode;
}
u32 spl_boot_device(void)
{
u32 wkup_devstat = readl(CTRLMMR_WKUP_DEVSTAT);
u32 main_devstat;
if (wkup_devstat & WKUP_DEVSTAT_MCU_OMLY_MASK) {
printf("ERROR: MCU only boot is not yet supported\n");
return BOOT_DEVICE_RAM;
}
/* MAIN CTRL MMR can only be read if MCU ONLY is 0 */
main_devstat = readl(CTRLMMR_MAIN_DEVSTAT);
if (bootindex == K3_PRIMARY_BOOTMODE)
return __get_primary_bootmedia(main_devstat, wkup_devstat);
else
return __get_backup_bootmedia(main_devstat);
}
arm: K3: j721e: Add basic support for J721E SoC definition The J721E SoC belongs to the K3 Multicore SoC architecture platform, providing advanced system integration to enable lower system costs of automotive applications such as infotainment, cluster, premium Audio, Gateway, industrial and a range of broad market applications. This SoC is designed around reducing the system cost by eliminating the need of an external system MCU and is targeted towards ASIL-B/C certification/requirements in addition to allowing complex software and system use-cases. Some highlights of this SoC are: * Dual Cortex-A72s in a single cluster, three clusters of lockstep capable dual Cortex-R5F MCUs, Deep-learning Matrix Multiply Accelerator(MMA), C7x floating point Vector DSP, Two C66x floating point DSPs. * 3D GPU PowerVR Rogue 8XE GE8430 * Vision Processing Accelerator (VPAC) with image signal processor and Depth and Motion Processing Accelerator (DMPAC) * Two Gigabit Industrial Communication Subsystems (ICSSG), each with dual PRUs and dual RTUs * Two CSI2.0 4L RX plus one CSI2.0 4L TX, one eDP/DP, One DSI Tx, and up to two DPI interfaces. * Integrated Ethernet switch supporting up to a total of 8 external ports in addition to legacy Ethernet switch of up to 2 ports. * System MMU (SMMU) Version 3.0 and advanced virtualisation capabilities. * Upto 4 PCIe-GEN3 controllers, 2 USB3.0 Dual-role device subsystems, 16 MCANs, 12 McASP, eMMC and SD, UFS, OSPI/HyperBus memory controller, QSPI, I3C and I2C, eCAP/eQEP, eHRPWM, MLB among other peripherals. * Two hardware accelerator block containing AES/DES/SHA/MD5 called SA2UL management. * Configurable L3 Cache and IO-coherent architecture with high data throughput capable distributed DMA architecture under NAVSS * Centralized System Controller for Security, Power, and Resource Management (DMSC) See J721E Technical Reference Manual (SPRUIL1, May 2019) for further details: http://www.ti.com/lit/pdf/spruil1 Add base support for J721E SoC Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com>
2019-06-13 04:59:42 +00:00
#endif
#ifdef CONFIG_SYS_K3_SPL_ATF
#define J721E_DEV_MCU_RTI0 262
#define J721E_DEV_MCU_RTI1 263
#define J721E_DEV_MCU_ARMSS0_CPU0 250
#define J721E_DEV_MCU_ARMSS0_CPU1 251
void release_resources_for_core_shutdown(void)
{
struct ti_sci_handle *ti_sci;
struct ti_sci_dev_ops *dev_ops;
struct ti_sci_proc_ops *proc_ops;
int ret;
u32 i;
const u32 put_device_ids[] = {
J721E_DEV_MCU_RTI0,
J721E_DEV_MCU_RTI1,
};
ti_sci = get_ti_sci_handle();
dev_ops = &ti_sci->ops.dev_ops;
proc_ops = &ti_sci->ops.proc_ops;
/* Iterate through list of devices to put (shutdown) */
for (i = 0; i < ARRAY_SIZE(put_device_ids); i++) {
u32 id = put_device_ids[i];
ret = dev_ops->put_device(ti_sci, id);
if (ret)
panic("Failed to put device %u (%d)\n", id, ret);
}
const u32 put_core_ids[] = {
J721E_DEV_MCU_ARMSS0_CPU1,
J721E_DEV_MCU_ARMSS0_CPU0, /* Handle CPU0 after CPU1 */
};
/* Iterate through list of cores to put (shutdown) */
for (i = 0; i < ARRAY_SIZE(put_core_ids); i++) {
u32 id = put_core_ids[i];
/*
* Queue up the core shutdown request. Note that this call
* needs to be followed up by an actual invocation of an WFE
* or WFI CPU instruction.
*/
ret = proc_ops->proc_shutdown_no_wait(ti_sci, id);
if (ret)
panic("Failed sending core %u shutdown message (%d)\n",
id, ret);
}
}
#endif
#ifdef CONFIG_SYS_K3_SPL_ATF
void start_non_linux_remote_cores(void)
{
int size = 0, ret;
u32 loadaddr = 0;
if (!soc_is_j721e())
return;
size = load_firmware("name_mainr5f0_0fw", "addr_mainr5f0_0load",
&loadaddr);
if (size <= 0)
goto err_load;
/* assuming remoteproc 2 is aliased for the needed remotecore */
ret = rproc_load(2, loadaddr, size);
if (ret) {
printf("Firmware failed to start on rproc (%d)\n", ret);
goto err_load;
}
ret = rproc_start(2);
if (ret) {
printf("Firmware init failed on rproc (%d)\n", ret);
goto err_load;
}
printf("Remoteproc 2 started successfully\n");
return;
err_load:
rproc_reset(2);
}
#endif