u-boot/board/aristainetos/Kconfig

if TARGET_ARISTAINETOS

config SYS_BOARD
	default "aristainetos"

config SYS_CONFIG_NAME
	default "aristainetos"

endif

if TARGET_ARISTAINETOS2

config SYS_BOARD
	default "aristainetos"

config SYS_CONFIG_NAME
	default "aristainetos2"

endif

if TARGET_ARISTAINETOS2B

config SYS_BOARD
	default "aristainetos"

config SYS_CONFIG_NAME
	default "aristainetos2b"

endif
Update aristainetos board to Kconfig aristainetos board was merged in u-boot-imx before Kconfig was integrated, but it is not yet mainline. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Heiko Schocher <hs@denx.de> Acked-by: Heiko Schocher <hs@denx.de> 2014-08-11 08:18:41 +00:00			`if TARGET_ARISTAINETOS`

			`config SYS_BOARD`
			`default "aristainetos"`

			`config SYS_CONFIG_NAME`
			`default "aristainetos"`

			`endif`
arm, imx6: add support for aristainetos2 board add support for imx6dl based aristainetos2 board U-Boot 2015.04-rc5-00066-g60f6ed4 (Apr 10 2015 - 08:46:27) CPU: Freescale i.MX6DL rev1.1 at 792 MHz Reset cause: WDOG Board: aristaitenos2 Watchdog enabled I2C: ready DRAM: 1 GiB NAND: 1024 MiB MMC: FSL_SDHC: 0 SF: Detected N25Q128A with page size 256 Bytes, erase size 64 KiB, total 16 MiB Display: lg4573 (480x800) In: serial Out: serial Err: serial Net: FEC [PRIME] Hit any key to stop autoboot: 0 => Signed-off-by: Heiko Schocher <hs@denx.de> 2015-05-18 11:32:31 +00:00
			`if TARGET_ARISTAINETOS2`

			`config SYS_BOARD`
			`default "aristainetos"`

			`config SYS_CONFIG_NAME`
			`default "aristainetos2"`

			`endif`
arm, imx6: add aristainetos 2b board version there is a 2b board version of the aristainetos2 board. Differences to the v2: - spi cs for the nor flash and display controller changed - some pinmux changes - LED gpio settings changed Signed-off-by: Heiko Schocher <hs@denx.de> 2015-08-24 09:36:40 +00:00
			`if TARGET_ARISTAINETOS2B`

			`config SYS_BOARD`
			`default "aristainetos"`

			`config SYS_CONFIG_NAME`
			`default "aristainetos2b"`

			`endif`