tegra: flesh out bootcmd
This implements a useful bootcmd for Tegra. The boot order is:
* If USB enabled, USB storage
* Internal MMC (SD card or eMMC)
* If networking is enabled, BOOTP/TFTP
When booting from USB or MMC, the boot script is assumed to be in
partition 1 (although this may be overridden via the rootpart variable),
both ext2 and FAT filesystems are supported, the boot script may exist
in either / or /boot, and the boot script may be named boot.scr.uimg or
boot.scr.
When booting over the network, it is assumed that boot.scr.uimg exists
on the TFTP server. There is less flexibility here since those setting
up network booting are expected to need less hand-holding.
In all cases, it is expected that the initial file loaded is a U-Boot
image containing a script that will load the kernel, load any required
initrd, load any required DTB, and finally bootm the kernel.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-05-16 06:21:00 +00:00
|
|
|
/*
|
|
|
|
|
* (C) Copyright 2010-2012
|
|
|
|
|
* NVIDIA Corporation <www.nvidia.com>
|
|
|
|
|
*
|
|
|
|
|
* See file CREDITS for list of people who contributed to this
|
|
|
|
|
* project.
|
|
|
|
|
*
|
|
|
|
|
* This program is free software; you can redistribute it and/or
|
|
|
|
|
* modify it under the terms of the GNU General Public License as
|
|
|
|
|
* published by the Free Software Foundation; either version 2 of
|
|
|
|
|
* the License, or (at your option) any later version.
|
|
|
|
|
*
|
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
|
*
|
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
|
* along with this program; if not, write to the Free Software
|
|
|
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
|
|
|
* MA 02111-1307 USA
|
|
|
|
|
*/
|
|
|
|
|
|
2012-09-05 00:00:24 +00:00
|
|
|
#ifndef __TEGRA_COMMON_POST_H
|
|
|
|
|
#define __TEGRA_COMMON_POST_H
|
tegra: flesh out bootcmd
This implements a useful bootcmd for Tegra. The boot order is:
* If USB enabled, USB storage
* Internal MMC (SD card or eMMC)
* If networking is enabled, BOOTP/TFTP
When booting from USB or MMC, the boot script is assumed to be in
partition 1 (although this may be overridden via the rootpart variable),
both ext2 and FAT filesystems are supported, the boot script may exist
in either / or /boot, and the boot script may be named boot.scr.uimg or
boot.scr.
When booting over the network, it is assumed that boot.scr.uimg exists
on the TFTP server. There is less flexibility here since those setting
up network booting are expected to need less hand-holding.
In all cases, it is expected that the initial file loaded is a U-Boot
image containing a script that will load the kernel, load any required
initrd, load any required DTB, and finally bootm the kernel.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-05-16 06:21:00 +00:00
|
|
|
|
|
|
|
|
#ifdef CONFIG_BOOTCOMMAND
|
|
|
|
|
|
|
|
|
|
#define BOOTCMDS_COMMON ""
|
|
|
|
|
|
|
|
|
|
#else
|
|
|
|
|
|
|
|
|
|
#ifdef CONFIG_CMD_MMC
|
|
|
|
|
#define BOOTCMDS_MMC \
|
|
|
|
|
"mmc_boot=" \
|
|
|
|
|
"setenv devtype mmc; " \
|
|
|
|
|
"if mmc dev ${devnum}; then " \
|
tegra: bootcmd enhancements
Place the list of searched boot devices, file-system types, boot file
locations/prefixes, and boot script names into variables. This allows
the user to override them directly (e.g. to change boot order, or select
the specific values they use) without having to edit the main bootcmd
and script_boot variables.
The default boot order is changed from USB, MMC, DHCP to MMC, USB, DHCP.
This speeds up the typical MMC boot case. People who want USB boot can
now edit variable boot_targets appropriately.
Also, reformat BOOTCMDS_COMMON to fit within 80 columns.
Potential future enhancements might be:
* Allow boards to specify which of bootcmd_mmc0/... should be defined,
based on the HW they contain.
* Allow boards to influence the order that the boot targets are added
into the boot_targets variable.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-06-04 10:59:22 +00:00
|
|
|
"run scan_boot; " \
|
tegra: flesh out bootcmd
This implements a useful bootcmd for Tegra. The boot order is:
* If USB enabled, USB storage
* Internal MMC (SD card or eMMC)
* If networking is enabled, BOOTP/TFTP
When booting from USB or MMC, the boot script is assumed to be in
partition 1 (although this may be overridden via the rootpart variable),
both ext2 and FAT filesystems are supported, the boot script may exist
in either / or /boot, and the boot script may be named boot.scr.uimg or
boot.scr.
When booting over the network, it is assumed that boot.scr.uimg exists
on the TFTP server. There is less flexibility here since those setting
up network booting are expected to need less hand-holding.
In all cases, it is expected that the initial file loaded is a U-Boot
image containing a script that will load the kernel, load any required
initrd, load any required DTB, and finally bootm the kernel.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-05-16 06:21:00 +00:00
|
|
|
"fi\0" \
|
tegra: bootcmd enhancements
Place the list of searched boot devices, file-system types, boot file
locations/prefixes, and boot script names into variables. This allows
the user to override them directly (e.g. to change boot order, or select
the specific values they use) without having to edit the main bootcmd
and script_boot variables.
The default boot order is changed from USB, MMC, DHCP to MMC, USB, DHCP.
This speeds up the typical MMC boot case. People who want USB boot can
now edit variable boot_targets appropriately.
Also, reformat BOOTCMDS_COMMON to fit within 80 columns.
Potential future enhancements might be:
* Allow boards to specify which of bootcmd_mmc0/... should be defined,
based on the HW they contain.
* Allow boards to influence the order that the boot targets are added
into the boot_targets variable.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-06-04 10:59:22 +00:00
|
|
|
"bootcmd_mmc0=setenv devnum 0; run mmc_boot;\0" \
|
|
|
|
|
"bootcmd_mmc1=setenv devnum 1; run mmc_boot;\0"
|
|
|
|
|
#define BOOT_TARGETS_MMC "mmc1 mmc0"
|
tegra: flesh out bootcmd
This implements a useful bootcmd for Tegra. The boot order is:
* If USB enabled, USB storage
* Internal MMC (SD card or eMMC)
* If networking is enabled, BOOTP/TFTP
When booting from USB or MMC, the boot script is assumed to be in
partition 1 (although this may be overridden via the rootpart variable),
both ext2 and FAT filesystems are supported, the boot script may exist
in either / or /boot, and the boot script may be named boot.scr.uimg or
boot.scr.
When booting over the network, it is assumed that boot.scr.uimg exists
on the TFTP server. There is less flexibility here since those setting
up network booting are expected to need less hand-holding.
In all cases, it is expected that the initial file loaded is a U-Boot
image containing a script that will load the kernel, load any required
initrd, load any required DTB, and finally bootm the kernel.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-05-16 06:21:00 +00:00
|
|
|
#else
|
|
|
|
|
#define BOOTCMDS_MMC ""
|
tegra: bootcmd enhancements
Place the list of searched boot devices, file-system types, boot file
locations/prefixes, and boot script names into variables. This allows
the user to override them directly (e.g. to change boot order, or select
the specific values they use) without having to edit the main bootcmd
and script_boot variables.
The default boot order is changed from USB, MMC, DHCP to MMC, USB, DHCP.
This speeds up the typical MMC boot case. People who want USB boot can
now edit variable boot_targets appropriately.
Also, reformat BOOTCMDS_COMMON to fit within 80 columns.
Potential future enhancements might be:
* Allow boards to specify which of bootcmd_mmc0/... should be defined,
based on the HW they contain.
* Allow boards to influence the order that the boot targets are added
into the boot_targets variable.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-06-04 10:59:22 +00:00
|
|
|
#define BOOT_TARGETS_MMC ""
|
tegra: flesh out bootcmd
This implements a useful bootcmd for Tegra. The boot order is:
* If USB enabled, USB storage
* Internal MMC (SD card or eMMC)
* If networking is enabled, BOOTP/TFTP
When booting from USB or MMC, the boot script is assumed to be in
partition 1 (although this may be overridden via the rootpart variable),
both ext2 and FAT filesystems are supported, the boot script may exist
in either / or /boot, and the boot script may be named boot.scr.uimg or
boot.scr.
When booting over the network, it is assumed that boot.scr.uimg exists
on the TFTP server. There is less flexibility here since those setting
up network booting are expected to need less hand-holding.
In all cases, it is expected that the initial file loaded is a U-Boot
image containing a script that will load the kernel, load any required
initrd, load any required DTB, and finally bootm the kernel.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-05-16 06:21:00 +00:00
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#ifdef CONFIG_CMD_USB
|
2012-06-04 10:59:23 +00:00
|
|
|
#define BOOTCMD_INIT_USB "run usb_init; "
|
tegra: flesh out bootcmd
This implements a useful bootcmd for Tegra. The boot order is:
* If USB enabled, USB storage
* Internal MMC (SD card or eMMC)
* If networking is enabled, BOOTP/TFTP
When booting from USB or MMC, the boot script is assumed to be in
partition 1 (although this may be overridden via the rootpart variable),
both ext2 and FAT filesystems are supported, the boot script may exist
in either / or /boot, and the boot script may be named boot.scr.uimg or
boot.scr.
When booting over the network, it is assumed that boot.scr.uimg exists
on the TFTP server. There is less flexibility here since those setting
up network booting are expected to need less hand-holding.
In all cases, it is expected that the initial file loaded is a U-Boot
image containing a script that will load the kernel, load any required
initrd, load any required DTB, and finally bootm the kernel.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-05-16 06:21:00 +00:00
|
|
|
#define BOOTCMDS_USB \
|
2012-06-04 10:59:23 +00:00
|
|
|
"usb_init=" \
|
|
|
|
|
"if ${usb_need_init}; then " \
|
|
|
|
|
"set usb_need_init false; " \
|
|
|
|
|
"usb start 0; " \
|
|
|
|
|
"fi\0" \
|
|
|
|
|
\
|
tegra: flesh out bootcmd
This implements a useful bootcmd for Tegra. The boot order is:
* If USB enabled, USB storage
* Internal MMC (SD card or eMMC)
* If networking is enabled, BOOTP/TFTP
When booting from USB or MMC, the boot script is assumed to be in
partition 1 (although this may be overridden via the rootpart variable),
both ext2 and FAT filesystems are supported, the boot script may exist
in either / or /boot, and the boot script may be named boot.scr.uimg or
boot.scr.
When booting over the network, it is assumed that boot.scr.uimg exists
on the TFTP server. There is less flexibility here since those setting
up network booting are expected to need less hand-holding.
In all cases, it is expected that the initial file loaded is a U-Boot
image containing a script that will load the kernel, load any required
initrd, load any required DTB, and finally bootm the kernel.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-05-16 06:21:00 +00:00
|
|
|
"usb_boot=" \
|
|
|
|
|
"setenv devtype usb; " \
|
2012-06-04 10:59:23 +00:00
|
|
|
BOOTCMD_INIT_USB \
|
tegra: flesh out bootcmd
This implements a useful bootcmd for Tegra. The boot order is:
* If USB enabled, USB storage
* Internal MMC (SD card or eMMC)
* If networking is enabled, BOOTP/TFTP
When booting from USB or MMC, the boot script is assumed to be in
partition 1 (although this may be overridden via the rootpart variable),
both ext2 and FAT filesystems are supported, the boot script may exist
in either / or /boot, and the boot script may be named boot.scr.uimg or
boot.scr.
When booting over the network, it is assumed that boot.scr.uimg exists
on the TFTP server. There is less flexibility here since those setting
up network booting are expected to need less hand-holding.
In all cases, it is expected that the initial file loaded is a U-Boot
image containing a script that will load the kernel, load any required
initrd, load any required DTB, and finally bootm the kernel.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-05-16 06:21:00 +00:00
|
|
|
"if usb dev ${devnum}; then " \
|
tegra: bootcmd enhancements
Place the list of searched boot devices, file-system types, boot file
locations/prefixes, and boot script names into variables. This allows
the user to override them directly (e.g. to change boot order, or select
the specific values they use) without having to edit the main bootcmd
and script_boot variables.
The default boot order is changed from USB, MMC, DHCP to MMC, USB, DHCP.
This speeds up the typical MMC boot case. People who want USB boot can
now edit variable boot_targets appropriately.
Also, reformat BOOTCMDS_COMMON to fit within 80 columns.
Potential future enhancements might be:
* Allow boards to specify which of bootcmd_mmc0/... should be defined,
based on the HW they contain.
* Allow boards to influence the order that the boot targets are added
into the boot_targets variable.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-06-04 10:59:22 +00:00
|
|
|
"run scan_boot; " \
|
tegra: flesh out bootcmd
This implements a useful bootcmd for Tegra. The boot order is:
* If USB enabled, USB storage
* Internal MMC (SD card or eMMC)
* If networking is enabled, BOOTP/TFTP
When booting from USB or MMC, the boot script is assumed to be in
partition 1 (although this may be overridden via the rootpart variable),
both ext2 and FAT filesystems are supported, the boot script may exist
in either / or /boot, and the boot script may be named boot.scr.uimg or
boot.scr.
When booting over the network, it is assumed that boot.scr.uimg exists
on the TFTP server. There is less flexibility here since those setting
up network booting are expected to need less hand-holding.
In all cases, it is expected that the initial file loaded is a U-Boot
image containing a script that will load the kernel, load any required
initrd, load any required DTB, and finally bootm the kernel.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-05-16 06:21:00 +00:00
|
|
|
"fi\0" \
|
2012-06-04 10:59:23 +00:00
|
|
|
\
|
tegra: bootcmd enhancements
Place the list of searched boot devices, file-system types, boot file
locations/prefixes, and boot script names into variables. This allows
the user to override them directly (e.g. to change boot order, or select
the specific values they use) without having to edit the main bootcmd
and script_boot variables.
The default boot order is changed from USB, MMC, DHCP to MMC, USB, DHCP.
This speeds up the typical MMC boot case. People who want USB boot can
now edit variable boot_targets appropriately.
Also, reformat BOOTCMDS_COMMON to fit within 80 columns.
Potential future enhancements might be:
* Allow boards to specify which of bootcmd_mmc0/... should be defined,
based on the HW they contain.
* Allow boards to influence the order that the boot targets are added
into the boot_targets variable.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-06-04 10:59:22 +00:00
|
|
|
"bootcmd_usb0=setenv devnum 0; run usb_boot;\0"
|
|
|
|
|
#define BOOT_TARGETS_USB "usb0"
|
tegra: flesh out bootcmd
This implements a useful bootcmd for Tegra. The boot order is:
* If USB enabled, USB storage
* Internal MMC (SD card or eMMC)
* If networking is enabled, BOOTP/TFTP
When booting from USB or MMC, the boot script is assumed to be in
partition 1 (although this may be overridden via the rootpart variable),
both ext2 and FAT filesystems are supported, the boot script may exist
in either / or /boot, and the boot script may be named boot.scr.uimg or
boot.scr.
When booting over the network, it is assumed that boot.scr.uimg exists
on the TFTP server. There is less flexibility here since those setting
up network booting are expected to need less hand-holding.
In all cases, it is expected that the initial file loaded is a U-Boot
image containing a script that will load the kernel, load any required
initrd, load any required DTB, and finally bootm the kernel.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-05-16 06:21:00 +00:00
|
|
|
#else
|
2012-06-04 10:59:23 +00:00
|
|
|
#define BOOTCMD_INIT_USB ""
|
tegra: flesh out bootcmd
This implements a useful bootcmd for Tegra. The boot order is:
* If USB enabled, USB storage
* Internal MMC (SD card or eMMC)
* If networking is enabled, BOOTP/TFTP
When booting from USB or MMC, the boot script is assumed to be in
partition 1 (although this may be overridden via the rootpart variable),
both ext2 and FAT filesystems are supported, the boot script may exist
in either / or /boot, and the boot script may be named boot.scr.uimg or
boot.scr.
When booting over the network, it is assumed that boot.scr.uimg exists
on the TFTP server. There is less flexibility here since those setting
up network booting are expected to need less hand-holding.
In all cases, it is expected that the initial file loaded is a U-Boot
image containing a script that will load the kernel, load any required
initrd, load any required DTB, and finally bootm the kernel.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-05-16 06:21:00 +00:00
|
|
|
#define BOOTCMDS_USB ""
|
tegra: bootcmd enhancements
Place the list of searched boot devices, file-system types, boot file
locations/prefixes, and boot script names into variables. This allows
the user to override them directly (e.g. to change boot order, or select
the specific values they use) without having to edit the main bootcmd
and script_boot variables.
The default boot order is changed from USB, MMC, DHCP to MMC, USB, DHCP.
This speeds up the typical MMC boot case. People who want USB boot can
now edit variable boot_targets appropriately.
Also, reformat BOOTCMDS_COMMON to fit within 80 columns.
Potential future enhancements might be:
* Allow boards to specify which of bootcmd_mmc0/... should be defined,
based on the HW they contain.
* Allow boards to influence the order that the boot targets are added
into the boot_targets variable.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-06-04 10:59:22 +00:00
|
|
|
#define BOOT_TARGETS_USB ""
|
tegra: flesh out bootcmd
This implements a useful bootcmd for Tegra. The boot order is:
* If USB enabled, USB storage
* Internal MMC (SD card or eMMC)
* If networking is enabled, BOOTP/TFTP
When booting from USB or MMC, the boot script is assumed to be in
partition 1 (although this may be overridden via the rootpart variable),
both ext2 and FAT filesystems are supported, the boot script may exist
in either / or /boot, and the boot script may be named boot.scr.uimg or
boot.scr.
When booting over the network, it is assumed that boot.scr.uimg exists
on the TFTP server. There is less flexibility here since those setting
up network booting are expected to need less hand-holding.
In all cases, it is expected that the initial file loaded is a U-Boot
image containing a script that will load the kernel, load any required
initrd, load any required DTB, and finally bootm the kernel.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-05-16 06:21:00 +00:00
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#ifdef CONFIG_CMD_DHCP
|
|
|
|
|
#define BOOTCMDS_DHCP \
|
|
|
|
|
"bootcmd_dhcp=" \
|
2012-06-04 10:59:23 +00:00
|
|
|
BOOTCMD_INIT_USB \
|
tegra: flesh out bootcmd
This implements a useful bootcmd for Tegra. The boot order is:
* If USB enabled, USB storage
* Internal MMC (SD card or eMMC)
* If networking is enabled, BOOTP/TFTP
When booting from USB or MMC, the boot script is assumed to be in
partition 1 (although this may be overridden via the rootpart variable),
both ext2 and FAT filesystems are supported, the boot script may exist
in either / or /boot, and the boot script may be named boot.scr.uimg or
boot.scr.
When booting over the network, it is assumed that boot.scr.uimg exists
on the TFTP server. There is less flexibility here since those setting
up network booting are expected to need less hand-holding.
In all cases, it is expected that the initial file loaded is a U-Boot
image containing a script that will load the kernel, load any required
initrd, load any required DTB, and finally bootm the kernel.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-05-16 06:21:00 +00:00
|
|
|
"if dhcp ${scriptaddr} boot.scr.uimg; then "\
|
|
|
|
|
"source ${scriptaddr}; " \
|
|
|
|
|
"fi\0"
|
tegra: bootcmd enhancements
Place the list of searched boot devices, file-system types, boot file
locations/prefixes, and boot script names into variables. This allows
the user to override them directly (e.g. to change boot order, or select
the specific values they use) without having to edit the main bootcmd
and script_boot variables.
The default boot order is changed from USB, MMC, DHCP to MMC, USB, DHCP.
This speeds up the typical MMC boot case. People who want USB boot can
now edit variable boot_targets appropriately.
Also, reformat BOOTCMDS_COMMON to fit within 80 columns.
Potential future enhancements might be:
* Allow boards to specify which of bootcmd_mmc0/... should be defined,
based on the HW they contain.
* Allow boards to influence the order that the boot targets are added
into the boot_targets variable.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-06-04 10:59:22 +00:00
|
|
|
#define BOOT_TARGETS_DHCP "dhcp"
|
tegra: flesh out bootcmd
This implements a useful bootcmd for Tegra. The boot order is:
* If USB enabled, USB storage
* Internal MMC (SD card or eMMC)
* If networking is enabled, BOOTP/TFTP
When booting from USB or MMC, the boot script is assumed to be in
partition 1 (although this may be overridden via the rootpart variable),
both ext2 and FAT filesystems are supported, the boot script may exist
in either / or /boot, and the boot script may be named boot.scr.uimg or
boot.scr.
When booting over the network, it is assumed that boot.scr.uimg exists
on the TFTP server. There is less flexibility here since those setting
up network booting are expected to need less hand-holding.
In all cases, it is expected that the initial file loaded is a U-Boot
image containing a script that will load the kernel, load any required
initrd, load any required DTB, and finally bootm the kernel.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-05-16 06:21:00 +00:00
|
|
|
#else
|
|
|
|
|
#define BOOTCMDS_DHCP ""
|
tegra: bootcmd enhancements
Place the list of searched boot devices, file-system types, boot file
locations/prefixes, and boot script names into variables. This allows
the user to override them directly (e.g. to change boot order, or select
the specific values they use) without having to edit the main bootcmd
and script_boot variables.
The default boot order is changed from USB, MMC, DHCP to MMC, USB, DHCP.
This speeds up the typical MMC boot case. People who want USB boot can
now edit variable boot_targets appropriately.
Also, reformat BOOTCMDS_COMMON to fit within 80 columns.
Potential future enhancements might be:
* Allow boards to specify which of bootcmd_mmc0/... should be defined,
based on the HW they contain.
* Allow boards to influence the order that the boot targets are added
into the boot_targets variable.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-06-04 10:59:22 +00:00
|
|
|
#define BOOT_TARGETS_DHCP ""
|
tegra: flesh out bootcmd
This implements a useful bootcmd for Tegra. The boot order is:
* If USB enabled, USB storage
* Internal MMC (SD card or eMMC)
* If networking is enabled, BOOTP/TFTP
When booting from USB or MMC, the boot script is assumed to be in
partition 1 (although this may be overridden via the rootpart variable),
both ext2 and FAT filesystems are supported, the boot script may exist
in either / or /boot, and the boot script may be named boot.scr.uimg or
boot.scr.
When booting over the network, it is assumed that boot.scr.uimg exists
on the TFTP server. There is less flexibility here since those setting
up network booting are expected to need less hand-holding.
In all cases, it is expected that the initial file loaded is a U-Boot
image containing a script that will load the kernel, load any required
initrd, load any required DTB, and finally bootm the kernel.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-05-16 06:21:00 +00:00
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#define BOOTCMDS_COMMON \
|
|
|
|
|
"rootpart=1\0" \
|
tegra: bootcmd enhancements
Place the list of searched boot devices, file-system types, boot file
locations/prefixes, and boot script names into variables. This allows
the user to override them directly (e.g. to change boot order, or select
the specific values they use) without having to edit the main bootcmd
and script_boot variables.
The default boot order is changed from USB, MMC, DHCP to MMC, USB, DHCP.
This speeds up the typical MMC boot case. People who want USB boot can
now edit variable boot_targets appropriately.
Also, reformat BOOTCMDS_COMMON to fit within 80 columns.
Potential future enhancements might be:
* Allow boards to specify which of bootcmd_mmc0/... should be defined,
based on the HW they contain.
* Allow boards to influence the order that the boot targets are added
into the boot_targets variable.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-06-04 10:59:22 +00:00
|
|
|
\
|
|
|
|
|
"script_boot=" \
|
2012-11-05 13:22:00 +00:00
|
|
|
"if load ${devtype} ${devnum}:${rootpart} " \
|
tegra: bootcmd enhancements
Place the list of searched boot devices, file-system types, boot file
locations/prefixes, and boot script names into variables. This allows
the user to override them directly (e.g. to change boot order, or select
the specific values they use) without having to edit the main bootcmd
and script_boot variables.
The default boot order is changed from USB, MMC, DHCP to MMC, USB, DHCP.
This speeds up the typical MMC boot case. People who want USB boot can
now edit variable boot_targets appropriately.
Also, reformat BOOTCMDS_COMMON to fit within 80 columns.
Potential future enhancements might be:
* Allow boards to specify which of bootcmd_mmc0/... should be defined,
based on the HW they contain.
* Allow boards to influence the order that the boot targets are added
into the boot_targets variable.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-06-04 10:59:22 +00:00
|
|
|
"${scriptaddr} ${prefix}${script}; then " \
|
|
|
|
|
"echo ${script} found! Executing ...;" \
|
|
|
|
|
"source ${scriptaddr};" \
|
|
|
|
|
"fi;\0" \
|
|
|
|
|
\
|
|
|
|
|
"scan_boot=" \
|
|
|
|
|
"echo Scanning ${devtype} ${devnum}...; " \
|
2012-11-05 13:22:00 +00:00
|
|
|
"for prefix in ${boot_prefixes}; do " \
|
|
|
|
|
"for script in ${boot_scripts}; do " \
|
|
|
|
|
"run script_boot; " \
|
tegra: bootcmd enhancements
Place the list of searched boot devices, file-system types, boot file
locations/prefixes, and boot script names into variables. This allows
the user to override them directly (e.g. to change boot order, or select
the specific values they use) without having to edit the main bootcmd
and script_boot variables.
The default boot order is changed from USB, MMC, DHCP to MMC, USB, DHCP.
This speeds up the typical MMC boot case. People who want USB boot can
now edit variable boot_targets appropriately.
Also, reformat BOOTCMDS_COMMON to fit within 80 columns.
Potential future enhancements might be:
* Allow boards to specify which of bootcmd_mmc0/... should be defined,
based on the HW they contain.
* Allow boards to influence the order that the boot targets are added
into the boot_targets variable.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-06-04 10:59:22 +00:00
|
|
|
"done; " \
|
|
|
|
|
"done;\0" \
|
|
|
|
|
\
|
|
|
|
|
"boot_targets=" \
|
|
|
|
|
BOOT_TARGETS_MMC " " \
|
|
|
|
|
BOOT_TARGETS_USB " " \
|
|
|
|
|
BOOT_TARGETS_DHCP " " \
|
|
|
|
|
"\0" \
|
|
|
|
|
\
|
|
|
|
|
"boot_prefixes=/ /boot/\0" \
|
|
|
|
|
\
|
|
|
|
|
"boot_scripts=boot.scr.uimg boot.scr\0" \
|
|
|
|
|
\
|
tegra: flesh out bootcmd
This implements a useful bootcmd for Tegra. The boot order is:
* If USB enabled, USB storage
* Internal MMC (SD card or eMMC)
* If networking is enabled, BOOTP/TFTP
When booting from USB or MMC, the boot script is assumed to be in
partition 1 (although this may be overridden via the rootpart variable),
both ext2 and FAT filesystems are supported, the boot script may exist
in either / or /boot, and the boot script may be named boot.scr.uimg or
boot.scr.
When booting over the network, it is assumed that boot.scr.uimg exists
on the TFTP server. There is less flexibility here since those setting
up network booting are expected to need less hand-holding.
In all cases, it is expected that the initial file loaded is a U-Boot
image containing a script that will load the kernel, load any required
initrd, load any required DTB, and finally bootm the kernel.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-05-16 06:21:00 +00:00
|
|
|
BOOTCMDS_MMC \
|
|
|
|
|
BOOTCMDS_USB \
|
|
|
|
|
BOOTCMDS_DHCP
|
|
|
|
|
|
tegra: bootcmd enhancements
Place the list of searched boot devices, file-system types, boot file
locations/prefixes, and boot script names into variables. This allows
the user to override them directly (e.g. to change boot order, or select
the specific values they use) without having to edit the main bootcmd
and script_boot variables.
The default boot order is changed from USB, MMC, DHCP to MMC, USB, DHCP.
This speeds up the typical MMC boot case. People who want USB boot can
now edit variable boot_targets appropriately.
Also, reformat BOOTCMDS_COMMON to fit within 80 columns.
Potential future enhancements might be:
* Allow boards to specify which of bootcmd_mmc0/... should be defined,
based on the HW they contain.
* Allow boards to influence the order that the boot targets are added
into the boot_targets variable.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-06-04 10:59:22 +00:00
|
|
|
#define CONFIG_BOOTCOMMAND \
|
|
|
|
|
"for target in ${boot_targets}; do run bootcmd_${target}; done"
|
tegra: flesh out bootcmd
This implements a useful bootcmd for Tegra. The boot order is:
* If USB enabled, USB storage
* Internal MMC (SD card or eMMC)
* If networking is enabled, BOOTP/TFTP
When booting from USB or MMC, the boot script is assumed to be in
partition 1 (although this may be overridden via the rootpart variable),
both ext2 and FAT filesystems are supported, the boot script may exist
in either / or /boot, and the boot script may be named boot.scr.uimg or
boot.scr.
When booting over the network, it is assumed that boot.scr.uimg exists
on the TFTP server. There is less flexibility here since those setting
up network booting are expected to need less hand-holding.
In all cases, it is expected that the initial file loaded is a U-Boot
image containing a script that will load the kernel, load any required
initrd, load any required DTB, and finally bootm the kernel.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-05-16 06:21:00 +00:00
|
|
|
|
|
|
|
|
#endif
|
|
|
|
|
|
2012-10-24 08:32:05 +00:00
|
|
|
#ifdef CONFIG_TEGRA_KEYBOARD
|
|
|
|
|
#define STDIN_KBD_KBC ",tegra-kbc"
|
|
|
|
|
#else
|
|
|
|
|
#define STDIN_KBD_KBC ""
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#ifdef CONFIG_USB_KEYBOARD
|
|
|
|
|
#define STDIN_KBD_USB ",usbkbd"
|
|
|
|
|
#define CONFIG_SYS_USB_EVENT_POLL
|
|
|
|
|
#define CONFIG_PREBOOT "usb start"
|
|
|
|
|
#else
|
|
|
|
|
#define STDIN_KBD_USB ""
|
|
|
|
|
#endif
|
|
|
|
|
|
2013-01-22 06:20:07 +00:00
|
|
|
#ifdef CONFIG_VIDEO_TEGRA
|
|
|
|
|
#define STDOUT_LCD ",lcd"
|
|
|
|
|
#else
|
|
|
|
|
#define STDOUT_LCD ""
|
|
|
|
|
#endif
|
|
|
|
|
|
2012-10-24 08:32:05 +00:00
|
|
|
#define TEGRA_DEVICE_SETTINGS \
|
|
|
|
|
"stdin=serial" STDIN_KBD_KBC STDIN_KBD_USB "\0" \
|
2013-01-22 06:20:07 +00:00
|
|
|
"stdout=serial" STDOUT_LCD "\0" \
|
|
|
|
|
"stderr=serial" STDOUT_LCD "\0" \
|
|
|
|
|
""
|
2012-10-24 08:32:05 +00:00
|
|
|
|
tegra: flesh out bootcmd
This implements a useful bootcmd for Tegra. The boot order is:
* If USB enabled, USB storage
* Internal MMC (SD card or eMMC)
* If networking is enabled, BOOTP/TFTP
When booting from USB or MMC, the boot script is assumed to be in
partition 1 (although this may be overridden via the rootpart variable),
both ext2 and FAT filesystems are supported, the boot script may exist
in either / or /boot, and the boot script may be named boot.scr.uimg or
boot.scr.
When booting over the network, it is assumed that boot.scr.uimg exists
on the TFTP server. There is less flexibility here since those setting
up network booting are expected to need less hand-holding.
In all cases, it is expected that the initial file loaded is a U-Boot
image containing a script that will load the kernel, load any required
initrd, load any required DTB, and finally bootm the kernel.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-05-16 06:21:00 +00:00
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
2012-09-05 00:00:24 +00:00
|
|
|
TEGRA_DEVICE_SETTINGS \
|
2012-10-02 09:26:51 +00:00
|
|
|
MEM_LAYOUT_ENV_SETTINGS \
|
tegra: flesh out bootcmd
This implements a useful bootcmd for Tegra. The boot order is:
* If USB enabled, USB storage
* Internal MMC (SD card or eMMC)
* If networking is enabled, BOOTP/TFTP
When booting from USB or MMC, the boot script is assumed to be in
partition 1 (although this may be overridden via the rootpart variable),
both ext2 and FAT filesystems are supported, the boot script may exist
in either / or /boot, and the boot script may be named boot.scr.uimg or
boot.scr.
When booting over the network, it is assumed that boot.scr.uimg exists
on the TFTP server. There is less flexibility here since those setting
up network booting are expected to need less hand-holding.
In all cases, it is expected that the initial file loaded is a U-Boot
image containing a script that will load the kernel, load any required
initrd, load any required DTB, and finally bootm the kernel.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-05-16 06:21:00 +00:00
|
|
|
BOOTCMDS_COMMON
|
|
|
|
|
|
2012-08-31 08:30:12 +00:00
|
|
|
/* overrides for SPL build here */
|
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
|
|
|
|
|
|
|
|
/* remove devicetree support */
|
|
|
|
|
#ifdef CONFIG_OF_CONTROL
|
|
|
|
|
#undef CONFIG_OF_CONTROL
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
/* remove I2C support */
|
|
|
|
|
#ifdef CONFIG_TEGRA_I2C
|
|
|
|
|
#undef CONFIG_TEGRA_I2C
|
|
|
|
|
#endif
|
|
|
|
|
#ifdef CONFIG_CMD_I2C
|
|
|
|
|
#undef CONFIG_CMD_I2C
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
/* remove MMC support */
|
|
|
|
|
#ifdef CONFIG_MMC
|
|
|
|
|
#undef CONFIG_MMC
|
|
|
|
|
#endif
|
|
|
|
|
#ifdef CONFIG_GENERIC_MMC
|
|
|
|
|
#undef CONFIG_GENERIC_MMC
|
|
|
|
|
#endif
|
2012-09-05 00:00:24 +00:00
|
|
|
#ifdef CONFIG_TEGRA_MMC
|
|
|
|
|
#undef CONFIG_TEGRA_MMC
|
2012-08-31 08:30:12 +00:00
|
|
|
#endif
|
|
|
|
|
#ifdef CONFIG_CMD_MMC
|
|
|
|
|
#undef CONFIG_CMD_MMC
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
/* remove partitions/filesystems */
|
|
|
|
|
#ifdef CONFIG_DOS_PARTITION
|
|
|
|
|
#undef CONFIG_DOS_PARTITION
|
|
|
|
|
#endif
|
|
|
|
|
#ifdef CONFIG_EFI_PARTITION
|
|
|
|
|
#undef CONFIG_EFI_PARTITION
|
|
|
|
|
#endif
|
2012-11-05 13:22:00 +00:00
|
|
|
#ifdef CONFIG_CMD_FS_GENERIC
|
|
|
|
|
#undef CONFIG_CMD_FS_GENERIC
|
|
|
|
|
#endif
|
|
|
|
|
#ifdef CONFIG_CMD_EXT4
|
|
|
|
|
#undef CONFIG_CMD_EXT4
|
|
|
|
|
#endif
|
2012-08-31 08:30:12 +00:00
|
|
|
#ifdef CONFIG_CMD_EXT2
|
|
|
|
|
#undef CONFIG_CMD_EXT2
|
|
|
|
|
#endif
|
|
|
|
|
#ifdef CONFIG_CMD_FAT
|
|
|
|
|
#undef CONFIG_CMD_FAT
|
|
|
|
|
#endif
|
2012-11-05 13:22:00 +00:00
|
|
|
#ifdef CONFIG_FS_EXT4
|
|
|
|
|
#undef CONFIG_FS_EXT4
|
|
|
|
|
#endif
|
|
|
|
|
#ifdef CONFIG_FS_FAT
|
|
|
|
|
#undef CONFIG_FS_FAT
|
|
|
|
|
#endif
|
2012-08-31 08:30:12 +00:00
|
|
|
|
|
|
|
|
/* remove USB */
|
|
|
|
|
#ifdef CONFIG_USB_EHCI
|
|
|
|
|
#undef CONFIG_USB_EHCI
|
|
|
|
|
#endif
|
|
|
|
|
#ifdef CONFIG_USB_EHCI_TEGRA
|
|
|
|
|
#undef CONFIG_USB_EHCI_TEGRA
|
|
|
|
|
#endif
|
|
|
|
|
#ifdef CONFIG_USB_STORAGE
|
|
|
|
|
#undef CONFIG_USB_STORAGE
|
|
|
|
|
#endif
|
|
|
|
|
#ifdef CONFIG_CMD_USB
|
|
|
|
|
#undef CONFIG_CMD_USB
|
|
|
|
|
#endif
|
|
|
|
|
|
2012-09-25 13:32:26 +00:00
|
|
|
/* remove part command support */
|
|
|
|
|
#ifdef CONFIG_PARTITION_UUIDS
|
|
|
|
|
#undef CONFIG_PARTITION_UUIDS
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#ifdef CONFIG_CMD_PART
|
|
|
|
|
#undef CONFIG_CMD_PART
|
|
|
|
|
#endif
|
|
|
|
|
|
2012-08-31 08:30:12 +00:00
|
|
|
#endif /* CONFIG_SPL_BUILD */
|
|
|
|
|
|
2012-09-05 00:00:24 +00:00
|
|
|
#endif /* __TEGRA_COMMON_POST_H */
|
