u-boot/arch/arm/mach-socfpga/spl_a10.c

284 lines
7.4 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2012-2021 Altera Corporation <www.altera.com>
*/
#include <common.h>
#include <cpu_func.h>
#include <hang.h>
#include <init.h>
#include <asm/global_data.h>
#include <asm/io.h>
#include <asm/pl310.h>
#include <asm/u-boot.h>
#include <asm/utils.h>
#include <image.h>
#include <asm/arch/reset_manager.h>
#include <spl.h>
#include <asm/arch/system_manager.h>
#include <asm/arch/freeze_controller.h>
#include <asm/arch/clock_manager.h>
#include <asm/arch/scan_manager.h>
#include <asm/arch/sdram.h>
#include <asm/arch/scu.h>
#include <asm/arch/misc.h>
#include <asm/arch/nic301.h>
#include <asm/sections.h>
#include <fdtdec.h>
#include <watchdog.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/fpga_manager.h>
#include <mmc.h>
#include <memalign.h>
#include <linux/delay.h>
#define FPGA_BUFSIZ 16 * 1024
#define FSBL_IMAGE_IS_VALID 0x49535756
#define FSBL_IMAGE_IS_INVALID 0x0
#define BOOTROM_CONFIGURES_IO_PINMUX 0x3
DECLARE_GLOBAL_DATA_PTR;
#define BOOTROM_SHARED_MEM_SIZE 0x800 /* 2KB */
#define BOOTROM_SHARED_MEM_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
SOCFPGA_PHYS_OCRAM_SIZE - \
BOOTROM_SHARED_MEM_SIZE)
#define RST_STATUS_SHARED_ADDR (BOOTROM_SHARED_MEM_ADDR + 0x438)
static u32 rst_mgr_status __section(".data");
/*
* Bootrom will clear the status register in reset manager and stores the
* reset status value in shared memory. Bootrom stores shared data at last
* 2KB of onchip RAM.
* This function save reset status provided by BootROM to rst_mgr_status.
* More information about reset status register value can be found in reset
* manager register description.
* When running in debugger without Bootrom, r0 to r3 are random values.
* So, skip save the value when r0 is not BootROM shared data address.
*
* r0 - Contains the pointer to the shared memory block. The shared
* memory block is located in the top 2 KB of on-chip RAM.
* r1 - contains the length of the shared memory.
* r2 - unused and set to 0x0.
* r3 - points to the version block.
*/
void save_boot_params(unsigned long r0, unsigned long r1, unsigned long r2,
unsigned long r3)
{
if (r0 == BOOTROM_SHARED_MEM_ADDR)
rst_mgr_status = readl(RST_STATUS_SHARED_ADDR);
save_boot_params_ret();
}
u32 spl_boot_device(void)
{
const u32 bsel = readl(socfpga_get_sysmgr_addr() + SYSMGR_A10_BOOTINFO);
switch (SYSMGR_GET_BOOTINFO_BSEL(bsel)) {
case 0x1: /* FPGA (HPS2FPGA Bridge) */
return BOOT_DEVICE_RAM;
case 0x2: /* NAND Flash (1.8V) */
case 0x3: /* NAND Flash (3.0V) */
socfpga_per_reset(SOCFPGA_RESET(NAND), 0);
return BOOT_DEVICE_NAND;
case 0x4: /* SD/MMC External Transceiver (1.8V) */
case 0x5: /* SD/MMC Internal Transceiver (3.0V) */
socfpga_per_reset(SOCFPGA_RESET(SDMMC), 0);
socfpga_per_reset(SOCFPGA_RESET(DMA), 0);
return BOOT_DEVICE_MMC1;
case 0x6: /* QSPI Flash (1.8V) */
case 0x7: /* QSPI Flash (3.0V) */
socfpga_per_reset(SOCFPGA_RESET(QSPI), 0);
return BOOT_DEVICE_SPI;
default:
printf("Invalid boot device (bsel=%08x)!\n", bsel);
hang();
}
}
#ifdef CONFIG_SPL_MMC
u32 spl_mmc_boot_mode(struct mmc *mmc, const u32 boot_device)
{
#if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_FS_EXT4)
return MMCSD_MODE_FS;
#else
return MMCSD_MODE_RAW;
#endif
}
#endif
void spl_board_init(void)
{
int ret;
ALLOC_CACHE_ALIGN_BUFFER(char, buf, FPGA_BUFSIZ);
/* enable console uart printing */
preloader_console_init();
schedule();
arch_early_init_r();
/* If the full FPGA is already loaded, ie.from EPCQ, config fpga pins */
if (is_fpgamgr_user_mode()) {
ret = config_pins(gd->fdt_blob, "shared");
if (ret)
return;
ret = config_pins(gd->fdt_blob, "fpga");
if (ret)
return;
} else if (!is_fpgamgr_early_user_mode()) {
/* Program IOSSM(early IO release) or full FPGA */
fpgamgr_program(buf, FPGA_BUFSIZ, 0);
/* Skipping double program for combined RBF */
if (!is_fpgamgr_user_mode()) {
/*
* Expect FPGA entered early user mode, so
* the flag is set to re-program IOSSM
*/
force_periph_program(true);
/* Re-program IOSSM to stabilize IO system */
fpgamgr_program(buf, FPGA_BUFSIZ, 0);
force_periph_program(false);
}
}
/* If the IOSSM/full FPGA is already loaded, start DDR */
if (is_fpgamgr_early_user_mode() || is_fpgamgr_user_mode()) {
if (!is_regular_boot_valid()) {
/*
* Ensure all signals in stable state before triggering
* warm reset. This value is recommended from stress
* test.
*/
mdelay(10);
#if IS_ENABLED(CONFIG_CADENCE_QSPI)
/*
* Trigger software reset to QSPI flash.
* On some boards, the QSPI flash reset may not be
* connected to the HPS warm reset.
*/
qspi_flash_software_reset();
#endif
ret = readl(socfpga_get_rstmgr_addr() +
RSTMGR_A10_SYSWARMMASK);
/*
* Masking s2f & FPGA manager module reset from warm
* reset
*/
writel(ret & (~(ALT_RSTMGR_SYSWARMMASK_S2F_SET_MSK |
ALT_RSTMGR_FPGAMGRWARMMASK_S2F_SET_MSK)),
socfpga_get_rstmgr_addr() +
RSTMGR_A10_SYSWARMMASK);
/*
* BootROM will configure both IO and pin mux after a
* warm reset
*/
ret = readl(socfpga_get_sysmgr_addr() +
SYSMGR_A10_ROMCODE_CTRL);
writel(ret | BOOTROM_CONFIGURES_IO_PINMUX,
socfpga_get_sysmgr_addr() +
SYSMGR_A10_ROMCODE_CTRL);
/*
* Up to here, image is considered valid and should be
* set as valid before warm reset is triggered
*/
writel(FSBL_IMAGE_IS_VALID, socfpga_get_sysmgr_addr() +
SYSMGR_A10_ROMCODE_INITSWSTATE);
/*
* Set this flag to scratch register, so that a proper
* boot progress before / after warm reset can be
* tracked by FSBL
*/
set_regular_boot(true);
schedule();
reset_cpu();
}
/*
* Reset this flag to scratch register, so that a proper
* boot progress before / after warm reset can be
* tracked by FSBL
*/
set_regular_boot(false);
ret = readl(socfpga_get_rstmgr_addr() +
RSTMGR_A10_SYSWARMMASK);
/*
* Unmasking s2f & FPGA manager module reset from warm
* reset
*/
writel(ret | ALT_RSTMGR_SYSWARMMASK_S2F_SET_MSK |
ALT_RSTMGR_FPGAMGRWARMMASK_S2F_SET_MSK,
socfpga_get_rstmgr_addr() + RSTMGR_A10_SYSWARMMASK);
/*
* Up to here, MPFE hang workaround is considered done and
* should be reset as invalid until FSBL successfully loading
* SSBL, and prepare jumping to SSBL, then only setting as
* valid
*/
writel(FSBL_IMAGE_IS_INVALID, socfpga_get_sysmgr_addr() +
SYSMGR_A10_ROMCODE_INITSWSTATE);
ddr_calibration_sequence();
}
if (!is_fpgamgr_user_mode())
fpgamgr_program(buf, FPGA_BUFSIZ, 0);
}
void board_init_f(ulong dummy)
{
if (spl_early_init())
hang();
socfpga_get_managers_addr();
dcache_disable();
socfpga_init_security_policies();
socfpga_sdram_remap_zero();
socfpga_pl310_clear();
/* Assert reset to all except L4WD0 and L4TIMER0 */
socfpga_per_reset_all();
socfpga_watchdog_disable();
/* Configure the clock based on handoff */
cm_basic_init(gd->fdt_blob);
#ifdef CONFIG_HW_WATCHDOG
/* release osc1 watchdog timer 0 from reset */
socfpga_reset_deassert_osc1wd0();
/* reconfigure and enable the watchdog */
hw_watchdog_init();
schedule();
#endif /* CONFIG_HW_WATCHDOG */
config_dedicated_pins(gd->fdt_blob);
schedule();
}
/* board specific function prior loading SSBL / U-Boot proper */
void spl_board_prepare_for_boot(void)
{
writel(FSBL_IMAGE_IS_VALID, socfpga_get_sysmgr_addr() +
SYSMGR_A10_ROMCODE_INITSWSTATE);
}