Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-30 16:39:35 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/configs/colibri_imx7_defconfig

92 lines
2.3 KiB
Text
Raw Normal View History

colibri_imx7: add Colibri iMX7S/iMX7D module support This commit adds support for the Toradex Computer on Modules Colibri iMX7S/iMX7D. The two modules/SoC's are very similar hence can be easily supported by one board. The board code detects RAM size at runtime which is one of the differences between the two boards. The board also uses the UART's in DTE mode, hence making use of the new DTE support via serial DM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2016-07-21 04:27:49 +00:00
CONFIG_ARM=y
CONFIG_ARCH_MX7=y
env: Finish migration of common ENV options - In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-19 01:02:10 +00:00
CONFIG_ENV_SIZE=0x20000
CONFIG_ENV_OFFSET=0x380000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-22 18:38:00 +00:00
CONFIG_DM_GPIO=y
CONFIG_TARGET_COLIBRI_IMX7=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-29 19:54:04 +00:00
CONFIG_NR_DRAM_BANKS=1
colibri_imx7: add Colibri iMX7S/iMX7D module support This commit adds support for the Toradex Computer on Modules Colibri iMX7S/iMX7D. The two modules/SoC's are very similar hence can be easily supported by one board. The board code detects RAM size at runtime which is one of the differences between the two boards. The board also uses the UART's in DTE mode, hence making use of the new DTE support via serial DM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2016-07-21 04:27:49 +00:00
CONFIG_IMX_RDC=y
CONFIG_IMX_BOOTAUX=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-07 19:25:00 +00:00
CONFIG_IMX_HAB=y
configs: colibri_imx7: enable CAAM driver Access to CAAM in non-secure mode must be enabled by the boot loader first. The U-Boot CAAM driver enables access to CAAM in non-secure mode by default. Hence enable the CAAM driver to allow Linux accessing CAAM directly. This prevents error messages like the following on Linux boot: caam 30900000.caam: Entropy delay = 3200 caam 30900000.caam: failed to acquire DECO 0 caam 30900000.caam: failed to instantiate RNG Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-01-08 11:42:35 +00:00
# CONFIG_CMD_DEKBLOB is not set
configs: colibri_imx7: use distro defaults The defconfig already use most features implied by distro defaults. Make sure we enable all features required by distro boot by making use of CONFIG_DISTRO_DEFAULTS. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2019-01-08 11:42:37 +00:00
CONFIG_DISTRO_DEFAULTS=y
colibri_imx7: add Colibri iMX7S/iMX7D module support This commit adds support for the Toradex Computer on Modules Colibri iMX7S/iMX7D. The two modules/SoC's are very similar hence can be easily supported by one board. The board code detects RAM size at runtime which is one of the differences between the two boards. The board also uses the UART's in DTE mode, hence making use of the new DTE support via serial DM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2016-07-21 04:27:49 +00:00
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri_imx7/imximage.cfg,MX7D"
CONFIG_BOOTDELAY=1
configs: colibri_imx7: use distro defaults The defconfig already use most features implied by distro defaults. Make sure we enable all features required by distro boot by making use of CONFIG_DISTRO_DEFAULTS. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2019-01-08 11:42:37 +00:00
# CONFIG_USE_BOOTCOMMAND is not set
Convert CONFIG_SYS_CONSOLE_IS_IN_ENV and CONFIG_CONSOLE_MUX to Kconfig This converts the following to Kconfig: CONFIG_SYS_CONSOLE_IS_IN_ENV CONFIG_CONSOLE_MUX Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Re-order, re-migrate] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-10-18 02:12:37 +00:00
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
common: Add DISPLAY_BOARDINFO Create a Kconfig entry for DISPLAY_BOARDINFO and make it be the default in certain architectures. Migrate all config files. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2016-10-12 01:33:46 +00:00
# CONFIG_DISPLAY_BOARDINFO is not set
treewide: Migrate CONFIG_DISPLAY_BOARDINFO_LATE to Kconfig Migrate the CONFIG_DISPLAY_BOARDINFO_LATE option to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc> [trini: Re-run migration] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-03-28 12:38:17 +00:00
CONFIG_DISPLAY_BOARDINFO_LATE=y
Kconfig: Migrate BOUNCE_BUFFER The bounce buffer is used by a few drivers (most of the MMC drivers) to overcome limitations in their respective DMA implementation. This moves the configuration to Kconfig and makes it user-selectable (even though it will be a required feature to make those drivers work): the expected usage is for drivers depending on this to 'select' it unconditionally from their respective Kconfig (see follow-up patches). This commit includes a full migration using moveconfig.py to ensure that each commit compiles. To ensure bisectability we update dependencies of various drivers to now select BOUNCE_BUFFER when needed. [trini: Squash all patches to ensure bisectability] Signed-off-by: Tom Rini <trini@konsulko.com> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Otavio Salvador <otavio@ossystems.com.br> [dw_mmc portion] Reviewed-by: Fabio Estevam <festevam@gmail.com> [mxsmmc portion] Reviewed-by: Simon Glass <sjg@chromium.org> [tegra portion]
2018-11-30 21:13:25 +00:00
CONFIG_BOUNCE_BUFFER=y
colibri_imx7: add Colibri iMX7S/iMX7D module support This commit adds support for the Toradex Computer on Modules Colibri iMX7S/iMX7D. The two modules/SoC's are very similar hence can be easily supported by one board. The board code detects RAM size at runtime which is one of the differences between the two boards. The board also uses the UART's in DTE mode, hence making use of the new DTE support via serial DM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2016-07-21 04:27:49 +00:00
CONFIG_SYS_PROMPT="Colibri iMX7 # "
# CONFIG_CMD_BOOTD is not set
Kconfig: Migrate CONFIG_BOOTM_* options Migrate all of the existing OS support options that are under CONFIG_BOOTM_* to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-09-20 21:36:50 +00:00
# CONFIG_BOOTM_PLAN9 is not set
# CONFIG_BOOTM_RTEMS is not set
colibri_imx7: add Colibri iMX7S/iMX7D module support This commit adds support for the Toradex Computer on Modules Colibri iMX7S/iMX7D. The two modules/SoC's are very similar hence can be easily supported by one board. The board code detects RAM size at runtime which is one of the differences between the two boards. The board also uses the UART's in DTE mode, hence making use of the new DTE support via serial DM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2016-07-21 04:27:49 +00:00
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_XIMG is not set
CONFIG_CMD_ASKENV=y
CONFIG_CMD_MEMTEST=y
treewide: mem: Move mtest related defines to Kconfig Move below defines which are used by mtest utility to Kconfig. CONFIG_SYS_MEMTEST_START CONFIG_SYS_MEMTEST_END Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> [trini: Fix kmcoge5ne board, re-run migration as well] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-05-04 13:26:21 +00:00
CONFIG_SYS_MEMTEST_START=0x80000000
CONFIG_SYS_MEMTEST_END=0x8c000000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-14 23:58:53 +00:00
CONFIG_CMD_DFU=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
colibri_imx7: add Colibri iMX7S/iMX7D module support This commit adds support for the Toradex Computer on Modules Colibri iMX7S/iMX7D. The two modules/SoC's are very similar hence can be easily supported by one board. The board code detects RAM size at runtime which is one of the differences between the two boards. The board also uses the UART's in DTE mode, hence making use of the new DTE support via serial DM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2016-07-21 04:27:49 +00:00
CONFIG_CMD_MMC=y
configs: colibri_imx7: enable DM for raw NAND devices Use DM and device trees for raw NAND devices by default. This fixes -74 NAND read errors since it makes sure the ECC settings are the same as used in Linux and our downstream U-Boot. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2019-01-08 11:42:30 +00:00
CONFIG_CMD_MTD=y
configs: Migrate CMD_NAND* Migrate all remaining instances of CMD_NAND, CMD_NAND_TRIMFFS CMD_NAND_LOCK_UNLOCK and CMD_NAND_TORTURE from the headers into the defconfig files. Tested-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-29 01:31:42 +00:00
CONFIG_CMD_NAND_TRIMFFS=y
CONFIG_CMD_NAND_TORTURE=y
colibri_imx7: add Colibri iMX7S/iMX7D module support This commit adds support for the Toradex Computer on Modules Colibri iMX7S/iMX7D. The two modules/SoC's are very similar hence can be easily supported by one board. The board code detects RAM size at runtime which is one of the differences between the two boards. The board also uses the UART's in DTE mode, hence making use of the new DTE support via serial DM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2016-07-21 04:27:49 +00:00
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
configs: colibri_imx7: use distro defaults The defconfig already use most features implied by distro defaults. Make sure we enable all features required by distro boot by making use of CONFIG_DISTRO_DEFAULTS. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2019-01-08 11:42:37 +00:00
# CONFIG_BOOTP_PXE is not set
Convert CONFIG_CMD_BMP to Kconfig This converts the following to Kconfig: CONFIG_CMD_BMP Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Add depends on LCD || DM_VIDEO || VIDEO] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-27 04:27:55 +00:00
CONFIG_CMD_BMP=y
toradex: imx: enable BOOTCOUNT feature This introduces automatic boot counter that increases after every reset.After a power-on reset, it will be initialized with 1, and each reboot will increment the value by 1. By default it's disabled if bootlimit isn't set. To enable this feature you have set bootcount limit ("bootlimit"), alternate boot action ("altbootcmd") that will be performed if the new value of bootcount exceeds the value of bootlimit, and "upgrade_available" to let U-Boot automatically increase and save the counter value after every reset: > setenv bootlimit 5 > setenv upgrade_available 1 > setenv altbootcmd "bootm ..." In case the bootlimit exceeds, the message will be shown and albootcmd executed: Warning: Bootlimit (5) exceeded. Using altbootcmd. To reset bootcount run: > bootcount reset Print current value: > bootcount print Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-06-16 19:20:08 +00:00
CONFIG_CMD_BOOTCOUNT=y
colibri_imx7: add Colibri iMX7S/iMX7D module support This commit adds support for the Toradex Computer on Modules Colibri iMX7S/iMX7D. The two modules/SoC's are very similar hence can be easily supported by one board. The board code detects RAM size at runtime which is one of the differences between the two boards. The board also uses the UART's in DTE mode, hence making use of the new DTE support via serial DM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2016-07-21 04:27:49 +00:00
CONFIG_CMD_CACHE=y
configs: colibri_imx7: enable CAAM driver Access to CAAM in non-secure mode must be enabled by the boot loader first. The U-Boot CAAM driver enables access to CAAM in non-secure mode by default. Hence enable the CAAM driver to allow Linux accessing CAAM directly. This prevents error messages like the following on Linux boot: caam 30900000.caam: Entropy delay = 3200 caam 30900000.caam: failed to acquire DECO 0 caam 30900000.caam: failed to instantiate RNG Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-01-08 11:42:35 +00:00
# CONFIG_CMD_HASH is not set
configs: Migrate and re-enabled CONFIG_CMD_MTDPARTS Now that CMD_UBI does not select CMD_MTDPARTS we need to make platforms that had been enabling it turn it on by hand. This exposed that we had not yet migrated CMD_MTDPARTS fully, so do so now. Fixes: 86dfa556d927 ("cmd: ubi: Remove useless call to mtdparts_init()") Signed-off-by: Tom Rini <trini@konsulko.com>
2018-11-14 00:54:45 +00:00
CONFIG_CMD_MTDPARTS=y
Kconfig: Migrate MTDIDS_DEFAULT / MTDPARTS_DEFAULT We move all instances of CONFIG_MTDIDS_DEFAULT and CONFIG_MTDPARTS_DEFAULT from the header files to the defconfig files. There's a few cases here where we need to expand upon what was in the header file. Tested-by: Adam Ford <aford173@gmail.com> #omap3_logic Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-22 21:55:07 +00:00
CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:512k(mx7-bcb),1536k(u-boot1)ro,1536k(u-boot2)ro,512k(u-boot-env),-(ubi)"
kconfig: introduce kconfig for UBI move the UBI config options into Kconfig. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andrew F. Davis <afd@ti.com> Reviewed by: Evgeni Dobrev <evgeni at studio-punkt.com>
2016-09-21 05:58:19 +00:00
CONFIG_CMD_UBI=y
configs: colibri_imx7: use distro defaults The defconfig already use most features implied by distro defaults. Make sure we enable all features required by distro boot by making use of CONFIG_DISTRO_DEFAULTS. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2019-01-08 11:42:37 +00:00
# CONFIG_ISO_PARTITION is not set
configs: enable device tree for Colibri iMX7 Enable device tree configuration and specify default device tree for Toradex Colibri iMX7. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2016-10-05 22:27:12 +00:00
CONFIG_OF_CONTROL=y
arm: dts: imx7: colibri: split dt for raw NAND and eMMC devices In preparation of adding CONFIG_DM_MMC support use separate device trees for raw NAND and eMMC devices. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-01-08 11:42:29 +00:00
CONFIG_DEFAULT_DEVICE_TREE="imx7-colibri-rawnand"
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-28 11:16:32 +00:00
CONFIG_ENV_IS_IN_NAND=y
env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol Today in initr_reloc_global_data() we use some non-obvious tests to determine if we need to relocate the env_addr within gd or not. In order to facilitate migration of other symbols to Kconfig we need to introduce a new symbol for this particular use case. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-13 03:46:36 +00:00
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
Migrate CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG to Kconfig Convert CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG to Kconfig Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Petr Vorel <petr.vorel@gmail.com> Reviewed-by: Petr Vorel <petr.vorel at gmail.com>
2018-04-01 16:37:53 +00:00
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
net: Convert CONFIG_IP_DEFRAG to Kconfig Convert CONFIG_IP_DEFRAG to Kconfig, update defconfigs, headers and whitelist. This patch is a follow-up on a patch by Christian Gmeiner with the added config/header/whitelist updates. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Reported-by: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2019-06-11 02:51:14 +00:00
CONFIG_IP_DEFRAG=y
net: Convert CONFIG_TFTP_BLOCKSIZE to Kconfig Convert CONFIG_TFTP_BLOCKSIZE to Kconfig, update defconfigs, headers and whitelist. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2019-06-11 02:51:15 +00:00
CONFIG_TFTP_BLOCKSIZE=16352
toradex: imx: enable BOOTCOUNT feature This introduces automatic boot counter that increases after every reset.After a power-on reset, it will be initialized with 1, and each reboot will increment the value by 1. By default it's disabled if bootlimit isn't set. To enable this feature you have set bootcount limit ("bootlimit"), alternate boot action ("altbootcmd") that will be performed if the new value of bootcount exceeds the value of bootlimit, and "upgrade_available" to let U-Boot automatically increase and save the counter value after every reset: > setenv bootlimit 5 > setenv upgrade_available 1 > setenv altbootcmd "bootm ..." In case the bootlimit exceeds, the message will be shown and albootcmd executed: Warning: Bootlimit (5) exceeded. Using altbootcmd. To reset bootcount run: > bootcount reset Print current value: > bootcount print Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-06-16 19:20:08 +00:00
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_ENV=y
configs: colibri_imx7: enable CAAM driver Access to CAAM in non-secure mode must be enabled by the boot loader first. The U-Boot CAAM driver enables access to CAAM in non-secure mode by default. Hence enable the CAAM driver to allow Linux accessing CAAM directly. This prevents error messages like the following on Linux boot: caam 30900000.caam: Entropy delay = 3200 caam 30900000.caam: failed to acquire DECO 0 caam 30900000.caam: failed to instantiate RNG Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-01-08 11:42:35 +00:00
CONFIG_FSL_CAAM=y
configs: colibri_imx7: use DFU for NAND instead of MMC The colibri_imx7_defconfig is for Colibri iMX7 raw NAND devices. Hence DFU for NAND is more useful then for MMC devices. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2019-01-08 11:42:36 +00:00
CONFIG_DFU_NAND=y
configs: enable device tree for Colibri iMX7 Enable device tree configuration and specify default device tree for Toradex Colibri iMX7. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2016-10-05 22:27:12 +00:00
CONFIG_DM_I2C=y
configs: colibri_imx7: use DM_MMC Now that device tree is in place use DM_MMC for Colibri iMX7 devices. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-01-08 11:42:33 +00:00
CONFIG_DM_MMC=y
Convert CONFIG_FSL_USDHC to Kconfig This converts the following to Kconfig: CONFIG_FSL_USDHC Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Add IMX8M, TARGET_S32V234EVB to FSL_USDHC list] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-14 12:23:43 +00:00
CONFIG_FSL_USDHC=y
mtd: ensure MTD/the raw NAND core are compiled when there is a NAND flash Both symbols must be enabled when there is a raw NAND driver selected. Also enable them when CONFIG_CMD_NAND is selected to avoid breaking things when we'll further rework the MTD dependency description. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> [trini: Rebase and migrate a few more boards here] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-03 17:50:07 +00:00
CONFIG_MTD=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-12-04 22:18:38 +00:00
CONFIG_DM_MTD=y
mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND Add more clarity by changing the Kconfig entry name. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> [trini: Re-run migration, update a few more cases] Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-10-03 17:50:03 +00:00
CONFIG_MTD_RAW_NAND=y
configs: colibri_imx7: enable DM for raw NAND devices Use DM and device trees for raw NAND devices by default. This fixes -74 NAND read errors since it makes sure the ECC settings are the same as used in Linux and our downstream U-Boot. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2019-01-08 11:42:30 +00:00
CONFIG_NAND_MXS_DT=y
kconfig: introduce kconfig for UBI move the UBI config options into Kconfig. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andrew F. Davis <afd@ti.com> Reviewed by: Evgeni Dobrev <evgeni at studio-punkt.com>
2016-09-21 05:58:19 +00:00
CONFIG_MTD_UBI_FASTMAP=y
Move PHYLIB to Kconfig Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-08-02 00:19:59 +00:00
CONFIG_PHYLIB=y
Move PHY_MICREL and PHY_MICREL_KSZ90X1 to Kconfig Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-08-02 00:20:00 +00:00
CONFIG_PHY_MICREL=y
net: phy: micrel: Allow KSZ8xxx and KSZ90x1 to be used together Commit d397f7c45b0b ("net: phy: micrel: Separate KSZ9000 drivers from KSZ8000 drivers") separated the KSZ8xxx and KSZ90x1 drivers and warns that you shouldn't select both of them due to a device ID clash between the KSZ9021 and the KS8721, asserting that "it is highly unlikely for a system to contain both a KSZ8000 and a KSZ9000 PHY". Unfortunately boards like the SAMA5D3xEK do contain both types of PHY, but fortunately the Linux Micrel PHY driver provides a solution by using different PHY ID and mask values to distinguish these chips. This commit contains the following changes: - The PHY ID and mask values for the KSZ9021 and the KS8721 now match those used by the Linux driver. - The warnings about not enabling both drivers have been removed. - The description for PHY_MICREL_KSZ8XXX has been corrected (these are 10/100 PHYs, not GbE PHYs). - PHY_MICREL_KSZ9021 and PHY_MICREL_KSZ9031 no longer select PHY_GIGE since this is selected by PHY_MICREL_KSZ90X1. - All of the relevant defconfig files have been updated now that PHY_MICREL_KSZ8XXX does not default to 'Y'. Signed-off-by: James Byrne <james.byrne@origamienergy.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-03-06 12:48:27 +00:00
CONFIG_PHY_MICREL_KSZ8XXX=y
colibri_imx7: migrate to DM_ETH Migrate to DM_ETH and remove hardcoded pinmux configuration. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-11-04 10:12:04 +00:00
CONFIG_DM_ETH=y
CONFIG_DM_MDIO=y
CONFIG_FEC_MXC=y
Convert CONFIG_MII et al to Kconfig This converts the following to Kconfig: CONFIG_MII CONFIG_DRIVER_TI_EMAC Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-07-21 04:03:57 +00:00
CONFIG_MII=y
configs: enable device tree for Colibri iMX7 Enable device tree configuration and specify default device tree for Toradex Colibri iMX7. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2016-10-05 22:27:12 +00:00
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX7=y
CONFIG_DM_PMIC=y
CONFIG_PMIC_RN5T567=y
colibri_imx7: add Colibri iMX7S/iMX7D module support This commit adds support for the Toradex Computer on Modules Colibri iMX7S/iMX7D. The two modules/SoC's are very similar hence can be easily supported by one board. The board code detects RAM size at runtime which is one of the differences between the two boards. The board also uses the UART's in DTE mode, hence making use of the new DTE support via serial DM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2016-07-21 04:27:49 +00:00
CONFIG_USB=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-21 14:11:23 +00:00
CONFIG_DM_USB=y
colibri_imx7: add Colibri iMX7S/iMX7D module support This commit adds support for the Toradex Computer on Modules Colibri iMX7S/iMX7D. The two modules/SoC's are very similar hence can be easily supported by one board. The board code detects RAM size at runtime which is one of the differences between the two boards. The board also uses the UART's in DTE mode, hence making use of the new DTE support via serial DM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2016-07-21 04:27:49 +00:00
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_GADGET=y
usb: gadget: Make g_dnl USB settings common The g_dnl USB settings for the vendor ID, product ID and manufacturer are actually common settings that can and should be shared by all the gadgets. Make them common by renaming them, and convert all the users. Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-09-07 06:58:08 +00:00
CONFIG_USB_GADGET_MANUFACTURER="Toradex"
CONFIG_USB_GADGET_VENDOR_NUM=0x1b67
CONFIG_USB_GADGET_PRODUCT_NUM=0x4000
colibri_imx7: add Colibri iMX7S/iMX7D module support This commit adds support for the Toradex Computer on Modules Colibri iMX7S/iMX7D. The two modules/SoC's are very similar hence can be easily supported by one board. The board code detects RAM size at runtime which is one of the differences between the two boards. The board also uses the UART's in DTE mode, hence making use of the new DTE support via serial DM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2016-07-21 04:27:49 +00:00
CONFIG_CI_UDC=y
CONFIG_USB_GADGET_DOWNLOAD=y
configs: colibri_imx7: enable DM_VIDEO Enable DM_VIDEO support for Colibri iMX7 NAND version. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-06-19 08:47:07 +00:00
CONFIG_DM_VIDEO=y
toradex apalis/colibri: add device tree overlay support Device tree overlays might prove useful in the future, enable it by default on all Toradex modules. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
2017-03-10 01:17:50 +00:00
CONFIG_OF_LIBFDT_OVERLAY=y
colibri_imx7: use device-tree for MTD partitions Use device-tree fixup to communicate the MTD partitions to the kernel. Remove mtdparts from the kernel command line. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2017-03-10 01:17:54 +00:00
CONFIG_FDT_FIXUP_PARTITIONS=y
Reference in a new issue Copy permalink