mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 11:00:15 +00:00
298 lines
10 KiB
C
298 lines
10 KiB
C
|
/*
|
||
|
* (C) Copyright 2001
|
||
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||
|
*
|
||
|
* See file CREDITS for list of people who contributed to this
|
||
|
* project.
|
||
|
*
|
||
|
* This program is free software; you can redistribute it and/or
|
||
|
* modify it under the terms of the GNU General Public License as
|
||
|
* published by the Free Software Foundation; either version 2 of
|
||
|
* the License, or (at your option) any later version.
|
||
|
*
|
||
|
* This program is distributed in the hope that it will be useful,
|
||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
|
* GNU General Public License for more details.
|
||
|
*
|
||
|
* You should have received a copy of the GNU General Public License
|
||
|
* along with this program; if not, write to the Free Software
|
||
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||
|
* MA 02111-1307 USA
|
||
|
*/
|
||
|
|
||
|
/*
|
||
|
* board/config.h - configuration options, board specific
|
||
|
*/
|
||
|
|
||
|
#ifndef __CONFIG_H
|
||
|
#define __CONFIG_H
|
||
|
|
||
|
/*
|
||
|
* High Level Configuration Options
|
||
|
* (easy to change)
|
||
|
*/
|
||
|
|
||
|
#define CONFIG_MPC860 1
|
||
|
#define CONFIG_AMX860 1
|
||
|
|
||
|
#undef CONFIG_8xx_CONS_SMC1 /* Console is on SCC2 */
|
||
|
#undef CONFIG_8xx_CONS_SMC2
|
||
|
#define CONFIG_8xx_CONS_SCC2 1
|
||
|
#undef CONFIG_8xx_CONS_NONE
|
||
|
#define CONFIG_BAUDRATE 9600
|
||
|
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
|
||
|
|
||
|
#define MPC8XX_FACT 10 /* Multiply by 10 */
|
||
|
#define MPC8XX_XIN 5000000 /* 5 MHz in */
|
||
|
#define MPC8XX_HZ ((MPC8XX_XIN) * (MPC8XX_FACT))
|
||
|
|
||
|
#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
|
||
|
|
||
|
#if 0
|
||
|
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
|
||
|
#else
|
||
|
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
|
||
|
#endif
|
||
|
|
||
|
#define CONFIG_BOOTCOMMAND \
|
||
|
"bootp;" \
|
||
|
"setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
|
||
|
"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;" \
|
||
|
"bootm" /* autoboot command */
|
||
|
|
||
|
#undef CONFIG_BOOTARGS
|
||
|
|
||
|
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
||
|
#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */
|
||
|
#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */
|
||
|
#undef CONFIG_KGDB_NONE /* define if kgdb on something else */
|
||
|
#define CONFIG_KGDB_INDEX 1 /* which serial channel for kgdb */
|
||
|
#define CONFIG_KGDB_BAUDRATE 9600 /* speed to run kgdb serial port at */
|
||
|
#endif
|
||
|
|
||
|
|
||
|
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
||
|
|
||
|
#define CONFIG_SCC1_ENET 1 /* use SCC1 ethernet */
|
||
|
|
||
|
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
|
||
|
|
||
|
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
|
||
|
CFG_CMD_DHCP | \
|
||
|
CFG_CMD_DATE )
|
||
|
|
||
|
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
|
||
|
|
||
|
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
|
||
|
#include <cmd_confdefs.h>
|
||
|
|
||
|
/*
|
||
|
* Miscellaneous configurable options
|
||
|
*/
|
||
|
#define CFG_LONGHELP /* undef to save memory */
|
||
|
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
|
||
|
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
||
|
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
|
||
|
#else
|
||
|
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
||
|
#endif
|
||
|
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
|
||
|
#define CFG_MAXARGS 16 /* max number of command args */
|
||
|
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
||
|
|
||
|
#define CFG_MEMTEST_START 0x0100000 /* memtest works on */
|
||
|
#define CFG_MEMTEST_END 0x0200000 /* 1 ... 4 MB in DRAM */
|
||
|
|
||
|
#define CFG_LOAD_ADDR 0x00100000
|
||
|
|
||
|
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
|
||
|
|
||
|
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
|
||
|
|
||
|
/*
|
||
|
* Low Level Configuration Settings
|
||
|
* (address mappings, register initial values, etc.)
|
||
|
* You should know what you are doing if you make changes here.
|
||
|
*/
|
||
|
|
||
|
/*-----------------------------------------------------------------------
|
||
|
* Internal Memory Mapped Register
|
||
|
*/
|
||
|
#define CFG_IMMR 0xFF000000
|
||
|
|
||
|
/*-----------------------------------------------------------------------
|
||
|
* Definitions for initial stack pointer and data area (in DPRAM)
|
||
|
*/
|
||
|
#define CFG_INIT_RAM_ADDR CFG_IMMR
|
||
|
#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
|
||
|
#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
|
||
|
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
|
||
|
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
|
||
|
|
||
|
/*-----------------------------------------------------------------------
|
||
|
* Start addresses for the final memory configuration
|
||
|
* (Set up by the startup code)
|
||
|
* Please note that CFG_SDRAM_BASE _must_ start at 0
|
||
|
*/
|
||
|
#define CFG_SDRAM_BASE 0x00000000
|
||
|
#define CFG_FLASH_BASE 0x40000000
|
||
|
#if defined(DEBUG)
|
||
|
#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
|
||
|
#else
|
||
|
#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
|
||
|
#endif
|
||
|
#define CFG_MONITOR_BASE CFG_FLASH_BASE
|
||
|
#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
|
||
|
|
||
|
/*
|
||
|
* U-Boot for AMX board supports two types of memory extension
|
||
|
* modules: one that provides 4 MB flash memory, and another one with
|
||
|
* 16 MB EDO DRAM.
|
||
|
*
|
||
|
* The flash module swaps the CS0 and CS1 signals: if the module is
|
||
|
* installed, CS0 is connected to Flash on the module and CS1 is
|
||
|
* connected to the on-board Flash. This means that you must intall
|
||
|
* U-Boot when the Flash module is plugged in, if you plan to use
|
||
|
* it.
|
||
|
*
|
||
|
* To enable support for the DRAM extension card, CONFIG_AMX_RAM_EXT
|
||
|
* must be defined. The DRAM module uses CS1.
|
||
|
*
|
||
|
* Only one of these modules may be installed at a time. If U-Boot
|
||
|
* is compiled with the CONFIG_AMX_RAM_EXT option set, it will not
|
||
|
* work if the Flash extension module is installed instead of the
|
||
|
* DRAM module.
|
||
|
*/
|
||
|
#define CONFIG_AMX_RAM_EXT /* 16Mb Ext. DRAM module support */
|
||
|
|
||
|
/*
|
||
|
* For booting Linux, the board info and command line data
|
||
|
* have to be in the first 8 MB of memory, since this is
|
||
|
* the maximum mapped by the Linux kernel during initialization.
|
||
|
*
|
||
|
* Use 4 MB for without and 8 MB with 16 MB DRAM extension module
|
||
|
* (CONFIG_AMX_RAM_EXT)
|
||
|
*/
|
||
|
#ifdef CONFIG_AMX_RAM_EXT
|
||
|
# define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
||
|
#else
|
||
|
# define CFG_BOOTMAPSZ (4 << 20) /* Initial Memory map for Linux */
|
||
|
#endif
|
||
|
/*-----------------------------------------------------------------------
|
||
|
* FLASH organization
|
||
|
*/
|
||
|
#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
|
||
|
#define CFG_MAX_FLASH_SECT 35 /* max number of sectors on one chip */
|
||
|
|
||
|
#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
|
||
|
#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
|
||
|
|
||
|
#define CFG_ENV_IS_IN_FLASH 1
|
||
|
#define CFG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */
|
||
|
#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
|
||
|
|
||
|
/*-----------------------------------------------------------------------
|
||
|
* Cache Configuration
|
||
|
*/
|
||
|
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
|
||
|
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
||
|
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
|
||
|
#endif
|
||
|
|
||
|
/*-----------------------------------------------------------------------
|
||
|
* SYPCR - System Protection Control 11-9
|
||
|
* SYPCR can only be written once after reset!
|
||
|
*-----------------------------------------------------------------------
|
||
|
* Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
|
||
|
*/
|
||
|
#if defined(CONFIG_WATCHDOG)
|
||
|
#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
|
||
|
SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
|
||
|
#else
|
||
|
#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
|
||
|
#endif
|
||
|
|
||
|
/*-----------------------------------------------------------------------
|
||
|
* SIUMCR - SIU Module Configuration 11-6
|
||
|
*-----------------------------------------------------------------------
|
||
|
* PCMCIA config., multi-function pin tri-state
|
||
|
*/
|
||
|
#define CFG_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
|
||
|
|
||
|
/*-----------------------------------------------------------------------
|
||
|
* TBSCR - Time Base Status and Control 11-26
|
||
|
*-----------------------------------------------------------------------
|
||
|
* Clear Reference Interrupt Status, Timebase freezing enabled
|
||
|
*/
|
||
|
#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
|
||
|
|
||
|
/*-----------------------------------------------------------------------
|
||
|
* PISCR - Periodic Interrupt Status and Control 11-31
|
||
|
*-----------------------------------------------------------------------
|
||
|
* Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
|
||
|
*/
|
||
|
#define CFG_PISCR (PISCR_PS | PISCR_PITF)
|
||
|
|
||
|
/*-----------------------------------------------------------------------
|
||
|
* PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
|
||
|
*-----------------------------------------------------------------------
|
||
|
* set the PLL, the low-power modes and the reset control (15-29)
|
||
|
*/
|
||
|
#define CFG_PLPRCR (((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT) | \
|
||
|
PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
|
||
|
|
||
|
/*-----------------------------------------------------------------------
|
||
|
* SCCR - System Clock and reset Control Register 15-27
|
||
|
*-----------------------------------------------------------------------
|
||
|
* Set clock output, timebase and RTC source and divider,
|
||
|
* power management and some other internal clocks
|
||
|
*/
|
||
|
#define SCCR_MASK SCCR_EBDF11
|
||
|
#define CFG_SCCR (SCCR_TBS|SCCR_COM00|SCCR_DFSYNC00|SCCR_DFBRG00|SCCR_DFNL000|SCCR_DFNH000|SCCR_DFLCD000|SCCR_DFALCD00)
|
||
|
|
||
|
#define CFG_DER 0
|
||
|
|
||
|
/*
|
||
|
* Init Memory Controller:
|
||
|
*
|
||
|
* BR0/1 and OR0/1 (FLASH)
|
||
|
*/
|
||
|
|
||
|
#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
|
||
|
#ifndef CONFIG_AMX_RAM_EXT
|
||
|
#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #1 */
|
||
|
#endif
|
||
|
|
||
|
#define CFG_REMAP_OR_AM 0x80000000 /* OR addr mask */
|
||
|
#define CFG_PRELIM_OR_AM 0xFFC00000 /* OR addr mask */
|
||
|
|
||
|
/* FLASH timing: ACS = 10, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 0 */
|
||
|
/* 0x00000800 0x00000400 0x00000100 0x00000030 0x00000004 */
|
||
|
#define CFG_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_5_CLK | OR_TRLX)
|
||
|
|
||
|
#define CFG_OR0_REMAP (CFG_REMAP_OR_AM | CFG_OR_TIMING_FLASH)
|
||
|
|
||
|
#define CFG_OR0_PRELIM 0xFFC00954 /* Real values for the board */
|
||
|
#define CFG_BR0_PRELIM 0x40000001 /* Real values for the board */
|
||
|
|
||
|
#ifndef CONFIG_AMX_RAM_EXT
|
||
|
#define CFG_OR1_REMAP CFG_OR0_REMAP
|
||
|
#define CFG_OR1_PRELIM 0xFFC00954 /* Real values for the board */
|
||
|
#define CFG_BR1_PRELIM 0x60000001 /* Real values for the board */
|
||
|
#endif
|
||
|
|
||
|
/* DSP ("Glue") Xilinx */
|
||
|
#define CFG_OR6_PRELIM 0xFFFF8000 /* 32kB, 15 waits, cs after addr, no bursts */
|
||
|
#define CFG_BR6_PRELIM 0x60000401 /* use GPCM for CS generation, 8 bit port */
|
||
|
|
||
|
/*
|
||
|
* Internal Definitions
|
||
|
*
|
||
|
* Boot Flags
|
||
|
*/
|
||
|
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
|
||
|
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
||
|
|
||
|
#endif /* __CONFIG_H */
|