Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-08 22:24:32 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/board/xilinx/zynq/Makefile

46 lines
1.2 KiB
Makefile
Raw Normal View History

SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-06 21:58:06 +00:00
# SPDX-License-Identifier: GPL-2.0+
xilinx: Add new Zynq board Add support for Xilinx Zynq board. Signed-off-by: Michal Simek <monstr@monstr.eu> Acked-by: Marek Vasut <marex@denx.de> CC: Joe Hershberger <joe.hershberger@gmail.com>
2012-09-28 09:56:37 +00:00
#
# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
board: arm: convert makefiles to Kbuild style Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Prafulla Wadaskar <prafulla@marvell.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Vipin Kumar <vipin.kumar@st.com> Cc: Tom Warren <twarren@nvidia.com> Cc: Tom Rini <trini@ti.com>
2013-10-21 02:53:37 +00:00
obj-y := board.o
zynq: treat ps7_init.c/h as external files to ignore them ps7_init.c and ps7_init.h are supposed to be exported by hw project and copied to board/xilinx/zynq/ directory. We want them to be ignored by git. So what we should do is to always treat them as external files rather than replacing ps7_init.c This commit does: - Move a weak function ps7_init() to arch/arm/cpu/armv7/zynq/spl.c and delete board/xilinx/zynq/ps7_init.c - Compile board/xilinx/zynq/ps7_init.c only when it exists - Add .gitignore to ignore ps7_init.c/h Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-05-12 03:18:30 +00:00
arm/arm64: zynq/zynqmp: pass the PS init file as a kconfig variable U-Boot needs to link ps7_init_gpl.c on Zynq or psu_init_gpl.c on ZynqMP (PS init for short). The current logic to locate this file for both platforms is: 1. if a board-specific file exists in board/xilinx/zynq[mp]/$(CONFIG_DEFAULT_DEVICE_TREE)/ps?_init_gpl.c then use it 2. otherwise use board/xilinx/zynq/ps?_init_gpl.c In the latter case the file does not exist in the U-Boot sources and must be copied in the source tree from the outside before starting the build. This is typical when it is generated from Xilinx tools while developing a custom hardware. However making sure that a board-specific file is _not_ found (and used) requires some trickery such as removing or overwriting all PS init files (e.g.: the current meta-xilinx yocto layer). This generates a few problems: * if the source tree is shared among different out-of-tree builds, they will pollute (and potentially corrupt) each other * the source tree cannot be read-only * any buildsystem must add a command to copy the PS init file binary * overwriting or deleting files in the source tree is ugly as hell Simplify usage by allowing to pass the path to the desired PS init file in kconfig variable XILINX_PS_INIT_FILE. It can be an absolute path or relative to $(srctree). If the variable is set, the user-specified file will always be used without being copied around. If the the variable is left empty, for backward compatibility fall back to the old behaviour. Since the issue is the same for Zynq and ZynqMP, add one kconfig variable in a common place and use it for both. Also use the new kconfig help text to document all the ways to give U-Boot the PS init file. Build-tested with all combinations of: - platform: zynq or zynqmp - PS init file: from XILINX_PS_INIT_FILE (absolute, relative path, non-existing), in-tree board-specific, in board/xilinx/zynq[mp]/ - building in-tree, in subdir, in other directory Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Nathan Rossi <nathan@nathanrossi.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-06-22 10:40:16 +00:00
ifneq ($(CONFIG_XILINX_PS_INIT_FILE),"")
PS_INIT_FILE := $(shell cd $(srctree); readlink -f $(CONFIG_XILINX_PS_INIT_FILE))
init-objs := ps_init_gpl.o
spl/board/xilinx/zynq/ps_init_gpl.o board/xilinx/zynq/ps_init_gpl.o: $(PS_INIT_FILE)
$(CC) $(c_flags) -I $(srctree)/$(src) -c -o $@ $^
endif
ARM: zynq: add default ps7_init_gpl.c/h for Zed, MicroZed, ZC70x Due to licensing issues, the files ps7_init.c/h are not able to be distributed with U-Boot source code. Recent Xilinx tools also provide the GPL variants (ps7_init_gpl.c/h), compatible with U-Boot license. Prior to this commit, we had to copy ps7_init files into board/xilinx/zynq/ before the compile. To be more user-friendly, let's include ps7_init_gpl.c/h for Zedboard, MicroZed, ZC702, ZC706. These init code have been taken from the hwplatform_templates directory of Xilinx SDK 2014.4. You can still use customized ps7_init_gpl.c/h by enabling CONFIG_ZYNQ_CUSTOM_INIT. The recommended directory for storing them is now board/xilinx/zynq/custom_hw_platform, but board/xilinx/zynq is still supported for backward compatibility. The latter emits a warning message to prompt users to gradually switch to the new directory. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-05-18 06:31:52 +00:00
arm: xilinx: Fill DEVICE_TREE directly in Makefiles DEVICE_TREE variable is not exported from dts/Makefile that's why it is necessary to setup directly before use. Fixes: 312f2c5b14fa ("arm: xilinx: Use device tree which can be passed on cmd line") Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-02-13 13:36:34 +00:00
DEVICE_TREE ?= $(CONFIG_DEFAULT_DEVICE_TREE:"%"=%)
ifeq ($(DEVICE_TREE),)
DEVICE_TREE := unset
endif
arm/arm64: zynq/zynqmp: pass the PS init file as a kconfig variable U-Boot needs to link ps7_init_gpl.c on Zynq or psu_init_gpl.c on ZynqMP (PS init for short). The current logic to locate this file for both platforms is: 1. if a board-specific file exists in board/xilinx/zynq[mp]/$(CONFIG_DEFAULT_DEVICE_TREE)/ps?_init_gpl.c then use it 2. otherwise use board/xilinx/zynq/ps?_init_gpl.c In the latter case the file does not exist in the U-Boot sources and must be copied in the source tree from the outside before starting the build. This is typical when it is generated from Xilinx tools while developing a custom hardware. However making sure that a board-specific file is _not_ found (and used) requires some trickery such as removing or overwriting all PS init files (e.g.: the current meta-xilinx yocto layer). This generates a few problems: * if the source tree is shared among different out-of-tree builds, they will pollute (and potentially corrupt) each other * the source tree cannot be read-only * any buildsystem must add a command to copy the PS init file binary * overwriting or deleting files in the source tree is ugly as hell Simplify usage by allowing to pass the path to the desired PS init file in kconfig variable XILINX_PS_INIT_FILE. It can be an absolute path or relative to $(srctree). If the variable is set, the user-specified file will always be used without being copied around. If the the variable is left empty, for backward compatibility fall back to the old behaviour. Since the issue is the same for Zynq and ZynqMP, add one kconfig variable in a common place and use it for both. Also use the new kconfig help text to document all the ways to give U-Boot the PS init file. Build-tested with all combinations of: - platform: zynq or zynqmp - PS init file: from XILINX_PS_INIT_FILE (absolute, relative path, non-existing), in-tree board-specific, in board/xilinx/zynq[mp]/ - building in-tree, in subdir, in other directory Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Nathan Rossi <nathan@nathanrossi.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-06-22 10:40:16 +00:00
ifeq ($(init-objs),)
arm: xilinx: Use device tree which can be passed on cmd line DEVICE_TREE variable has been added by commit 6ab6b2afa091 ("dts: re-write dts/Makefile more simply with Kbuild") where DT can be specified on command line. If it is not then CONFIG_DEFAULT_DEVICE_TREE is used to ensure backward compatibility. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-12-06 11:05:34 +00:00
hw-platform-y :=$(shell echo $(DEVICE_TREE))
ARM: zynq: add default ps7_init_gpl.c/h for Zed, MicroZed, ZC70x Due to licensing issues, the files ps7_init.c/h are not able to be distributed with U-Boot source code. Recent Xilinx tools also provide the GPL variants (ps7_init_gpl.c/h), compatible with U-Boot license. Prior to this commit, we had to copy ps7_init files into board/xilinx/zynq/ before the compile. To be more user-friendly, let's include ps7_init_gpl.c/h for Zedboard, MicroZed, ZC702, ZC706. These init code have been taken from the hwplatform_templates directory of Xilinx SDK 2014.4. You can still use customized ps7_init_gpl.c/h by enabling CONFIG_ZYNQ_CUSTOM_INIT. The recommended directory for storing them is now board/xilinx/zynq/custom_hw_platform, but board/xilinx/zynq is still supported for backward compatibility. The latter emits a warning message to prompt users to gradually switch to the new directory. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-05-18 06:31:52 +00:00
init-objs := $(if $(wildcard $(srctree)/$(src)/$(hw-platform-y)/ps7_init_gpl.c),\
$(hw-platform-y)/ps7_init_gpl.o)
arm/arm64: zynq/zynqmp: pass the PS init file as a kconfig variable U-Boot needs to link ps7_init_gpl.c on Zynq or psu_init_gpl.c on ZynqMP (PS init for short). The current logic to locate this file for both platforms is: 1. if a board-specific file exists in board/xilinx/zynq[mp]/$(CONFIG_DEFAULT_DEVICE_TREE)/ps?_init_gpl.c then use it 2. otherwise use board/xilinx/zynq/ps?_init_gpl.c In the latter case the file does not exist in the U-Boot sources and must be copied in the source tree from the outside before starting the build. This is typical when it is generated from Xilinx tools while developing a custom hardware. However making sure that a board-specific file is _not_ found (and used) requires some trickery such as removing or overwriting all PS init files (e.g.: the current meta-xilinx yocto layer). This generates a few problems: * if the source tree is shared among different out-of-tree builds, they will pollute (and potentially corrupt) each other * the source tree cannot be read-only * any buildsystem must add a command to copy the PS init file binary * overwriting or deleting files in the source tree is ugly as hell Simplify usage by allowing to pass the path to the desired PS init file in kconfig variable XILINX_PS_INIT_FILE. It can be an absolute path or relative to $(srctree). If the variable is set, the user-specified file will always be used without being copied around. If the the variable is left empty, for backward compatibility fall back to the old behaviour. Since the issue is the same for Zynq and ZynqMP, add one kconfig variable in a common place and use it for both. Also use the new kconfig help text to document all the ways to give U-Boot the PS init file. Build-tested with all combinations of: - platform: zynq or zynqmp - PS init file: from XILINX_PS_INIT_FILE (absolute, relative path, non-existing), in-tree board-specific, in board/xilinx/zynq[mp]/ - building in-tree, in subdir, in other directory Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Nathan Rossi <nathan@nathanrossi.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-06-22 10:40:16 +00:00
endif
ARM: zynq: add default ps7_init_gpl.c/h for Zed, MicroZed, ZC70x Due to licensing issues, the files ps7_init.c/h are not able to be distributed with U-Boot source code. Recent Xilinx tools also provide the GPL variants (ps7_init_gpl.c/h), compatible with U-Boot license. Prior to this commit, we had to copy ps7_init files into board/xilinx/zynq/ before the compile. To be more user-friendly, let's include ps7_init_gpl.c/h for Zedboard, MicroZed, ZC702, ZC706. These init code have been taken from the hwplatform_templates directory of Xilinx SDK 2014.4. You can still use customized ps7_init_gpl.c/h by enabling CONFIG_ZYNQ_CUSTOM_INIT. The recommended directory for storing them is now board/xilinx/zynq/custom_hw_platform, but board/xilinx/zynq is still supported for backward compatibility. The latter emits a warning message to prompt users to gradually switch to the new directory. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-05-18 06:31:52 +00:00
ifeq ($(init-objs),)
ifneq ($(wildcard $(srctree)/$(src)/ps7_init_gpl.c),)
init-objs := ps7_init_gpl.o
$(if $(CONFIG_SPL_BUILD),\
zynq: Fix typo in Makefile about custom ps7_init file Trivial fix. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-21 09:05:31 +00:00
$(warning Put custom ps7_init_gpl.c/h to board/xilinx/zynq/custom_hw_platform/))
ARM: zynq: add default ps7_init_gpl.c/h for Zed, MicroZed, ZC70x Due to licensing issues, the files ps7_init.c/h are not able to be distributed with U-Boot source code. Recent Xilinx tools also provide the GPL variants (ps7_init_gpl.c/h), compatible with U-Boot license. Prior to this commit, we had to copy ps7_init files into board/xilinx/zynq/ before the compile. To be more user-friendly, let's include ps7_init_gpl.c/h for Zedboard, MicroZed, ZC702, ZC706. These init code have been taken from the hwplatform_templates directory of Xilinx SDK 2014.4. You can still use customized ps7_init_gpl.c/h by enabling CONFIG_ZYNQ_CUSTOM_INIT. The recommended directory for storing them is now board/xilinx/zynq/custom_hw_platform, but board/xilinx/zynq is still supported for backward compatibility. The latter emits a warning message to prompt users to gradually switch to the new directory. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-05-18 06:31:52 +00:00
endif
endif
xilinx: zynq: Add support to secure images This patch basically adds two new commands for loadig secure images. 1. zynq rsa adds support to load secure image which can be both authenticated or encrypted or both authenticated and encrypted image in xilinx bootimage(BOOT.bin) format. 2. zynq aes command adds support to decrypt and load encrypted image back to DDR as per destination address. The image has to be encrypted using xilinx bootgen tool and to get only the encrypted image from tool use -split option while invoking bootgen. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-06-26 09:32:19 +00:00
ifndef CONFIG_SPL_BUILD
obj-$(CONFIG_CMD_ZYNQ) += cmds.o
obj-$(CONFIG_CMD_ZYNQ_RSA) += bootimg.o
endif
ARM: zynq: add default ps7_init_gpl.c/h for Zed, MicroZed, ZC70x Due to licensing issues, the files ps7_init.c/h are not able to be distributed with U-Boot source code. Recent Xilinx tools also provide the GPL variants (ps7_init_gpl.c/h), compatible with U-Boot license. Prior to this commit, we had to copy ps7_init files into board/xilinx/zynq/ before the compile. To be more user-friendly, let's include ps7_init_gpl.c/h for Zedboard, MicroZed, ZC702, ZC706. These init code have been taken from the hwplatform_templates directory of Xilinx SDK 2014.4. You can still use customized ps7_init_gpl.c/h by enabling CONFIG_ZYNQ_CUSTOM_INIT. The recommended directory for storing them is now board/xilinx/zynq/custom_hw_platform, but board/xilinx/zynq is still supported for backward compatibility. The latter emits a warning message to prompt users to gradually switch to the new directory. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-05-18 06:31:52 +00:00
obj-$(CONFIG_SPL_BUILD) += $(init-objs)
zynq: disable -Wstrict-prototypes option for ps7_init.c The files ps7_init.c and ps7_init.h are supposed to be generated by hw projects such as Vivado, PlanAhead and then to be copied into board/xilinx/zynq directory. But some prototypes in them cause annoying warning messages: CC spl/board/xilinx/zynq/ps7_init.o In file included from board/xilinx/zynq/ps7_init.c:50:0: board/xilinx/zynq/ps7_init.h:137:1: warning: function declaration isn't a prototype [-Wstrict-prototypes] board/xilinx/zynq/ps7_init.h:138:1: warning: function declaration isn't a prototype [-Wstrict-prototypes] board/xilinx/zynq/ps7_init.h:139:1: warning: function declaration isn't a prototype [-Wstrict-prototypes] board/xilinx/zynq/ps7_init.h:145:1: warning: function declaration isn't a prototype [-Wstrict-prototypes] board/xilinx/zynq/ps7_init.c:12602:1: warning: function declaration isn't a prototype [-Wstrict-prototypes] board/xilinx/zynq/ps7_init.c:12723:1: warning: function declaration isn't a prototype [-Wstrict-prototypes] board/xilinx/zynq/ps7_init.c:12742:1: warning: function declaration isn't a prototype [-Wstrict-prototypes] board/xilinx/zynq/ps7_init.c:12761:1: warning: function declaration isn't a prototype [-Wstrict-prototypes] board/xilinx/zynq/ps7_init.c:12854:6: warning: function declaration isn't a prototype [-Wstrict-prototypes] The prototypes should be int ps7_init(void); int ps7_post_config(void); int ps7_debug(void); rather than int ps7_init(); int ps7_post_config(); int ps7_debug(); We do not want to be bothered because of automatically generated files. But we cannot touch the external projects for now. What we can do is to disable -Wstrict-prototypes for ps7_init.c Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Michal Simek <michal.simek@xilinx.com> Tested-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-05-29 05:46:13 +00:00
# Suppress "warning: function declaration isn't a prototype"
zynq: Use GPLed files for SPL The latest Xilinx tools generate ps7_init files that are explicitly available under GPL. Change the makefile to allow drop in of those files for building the SPL. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Acked-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> Reviewed-and-tested-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-10-30 17:52:43 +00:00
CFLAGS_REMOVE_ps7_init_gpl.o := -Wstrict-prototypes
ARM: zynq: add separate configuration for ZC702 and ZC706 Prior to this commit, ZC702 and ZC706 shared the same configuration and were built as follows: ZC702: make zynq_zc70x_defconfig && make ZC706: make zynq_zc70x_defconfig && make DEVICE_TREE=zynq-zc706 This commit introduces separate configuration for them, which makes the next commit much easier. Going forward, the recommended build commands are: ZC702: make zynq_zc702_defconfig && make ZC706: make zynq_zc706_defconfig && make Although the old work flow is still supported, CONFIG_TARGET_ZC70X has been marked as deprecated. If used, the warning message is shown to prompt users to switch to the new scheme. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-05-18 06:31:51 +00:00
ARM: zynq: add default ps7_init_gpl.c/h for Zed, MicroZed, ZC70x Due to licensing issues, the files ps7_init.c/h are not able to be distributed with U-Boot source code. Recent Xilinx tools also provide the GPL variants (ps7_init_gpl.c/h), compatible with U-Boot license. Prior to this commit, we had to copy ps7_init files into board/xilinx/zynq/ before the compile. To be more user-friendly, let's include ps7_init_gpl.c/h for Zedboard, MicroZed, ZC702, ZC706. These init code have been taken from the hwplatform_templates directory of Xilinx SDK 2014.4. You can still use customized ps7_init_gpl.c/h by enabling CONFIG_ZYNQ_CUSTOM_INIT. The recommended directory for storing them is now board/xilinx/zynq/custom_hw_platform, but board/xilinx/zynq is still supported for backward compatibility. The latter emits a warning message to prompt users to gradually switch to the new directory. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-05-18 06:31:52 +00:00
# To include xil_io.h
CFLAGS_ps7_init_gpl.o := -I$(srctree)/$(src)
Reference in a new issue Copy permalink