Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-14 17:07:38 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/drivers/mtd/spi/spi-nor-ids.c

343 lines
17 KiB
C
Raw Normal View History

mtd: spi: Add lightweight SPI flash stack for SPL Add a tiny SPI flash stack that just supports reading data/images from SPI flash. This is useful for boards that have SPL size constraints and would need to use SPI flash framework just to read images/data from flash. There is approximately 1.5 to 2KB savings with this. Based on prior work of reducing spi flash id table by Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Tested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Tested-by: Stefan Roese <sr@denx.de> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> #zynq-microzed
2019-02-05 05:59:25 +00:00
// SPDX-License-Identifier: GPL-2.0+
/*
*
* Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc.
* Copyright (C) 2016 Jagan Teki <jagan@openedev.com>
* Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
*/
#include <common.h>
#include <spi.h>
#include <spi_flash.h>
#include "sf_internal.h"
/* Exclude chip names for SPL to save space */
#if !CONFIG_IS_ENABLED(SPI_FLASH_TINY)
#define INFO_NAME(_name) .name = _name,
#else
#define INFO_NAME(_name)
#endif
/* Used when the "_ext_id" is two bytes at most */
#define INFO(_name, _jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \
INFO_NAME(_name) \
.id = { \
((_jedec_id) >> 16) & 0xff, \
((_jedec_id) >> 8) & 0xff, \
(_jedec_id) & 0xff, \
((_ext_id) >> 8) & 0xff, \
(_ext_id) & 0xff, \
}, \
.id_len = (!(_jedec_id) ? 0 : (3 + ((_ext_id) ? 2 : 0))), \
.sector_size = (_sector_size), \
.n_sectors = (_n_sectors), \
.page_size = 256, \
.flags = (_flags),
#define INFO6(_name, _jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \
INFO_NAME(_name) \
.id = { \
((_jedec_id) >> 16) & 0xff, \
((_jedec_id) >> 8) & 0xff, \
(_jedec_id) & 0xff, \
((_ext_id) >> 16) & 0xff, \
((_ext_id) >> 8) & 0xff, \
(_ext_id) & 0xff, \
}, \
.id_len = 6, \
.sector_size = (_sector_size), \
.n_sectors = (_n_sectors), \
.page_size = 256, \
.flags = (_flags),
/* NOTE: double check command sets and memory organization when you add
* more nor chips. This current list focusses on newer chips, which
* have been converging on command sets which including JEDEC ID.
*
* All newly added entries should describe *hardware* and should use SECT_4K
* (or SECT_4K_PMC) if hardware supports erasing 4 KiB sectors. For usage
* scenarios excluding small sectors there is config option that can be
mtd: spi-nor-core: Replace MTD_SPI_NOR_USE_4K_SECTORS with SPI_FLASH_USE_4K_SECTORS U-Boot uses CONFIG_SPI_FLASH_USE_4K_SECTORS to enable 4K small sector support. Use that instead of MTD_SPI_NOR_USE_4K_SECTORS. Reported-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-09-26 13:34:27 +00:00
* disabled: CONFIG_SPI_FLASH_USE_4K_SECTORS.
mtd: spi: Add lightweight SPI flash stack for SPL Add a tiny SPI flash stack that just supports reading data/images from SPI flash. This is useful for boards that have SPL size constraints and would need to use SPI flash framework just to read images/data from flash. There is approximately 1.5 to 2KB savings with this. Based on prior work of reducing spi flash id table by Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Tested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Tested-by: Stefan Roese <sr@denx.de> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> #zynq-microzed
2019-02-05 05:59:25 +00:00
* For historical (and compatibility) reasons (before we got above config) some
* old entries may be missing 4K flag.
*/
const struct flash_info spi_nor_ids[] = {
#ifdef CONFIG_SPI_FLASH_ATMEL /* ATMEL */
/* Atmel -- some are (confusingly) marketed as "DataFlash" */
{ INFO("at26df321", 0x1f4700, 0, 64 * 1024, 64, SECT_4K) },
{ INFO("at25df321a", 0x1f4701, 0, 64 * 1024, 64, SECT_4K) },
{ INFO("at45db011d", 0x1f2200, 0, 64 * 1024, 4, SECT_4K) },
{ INFO("at45db021d", 0x1f2300, 0, 64 * 1024, 8, SECT_4K) },
{ INFO("at45db041d", 0x1f2400, 0, 64 * 1024, 8, SECT_4K) },
{ INFO("at45db081d", 0x1f2500, 0, 64 * 1024, 16, SECT_4K) },
{ INFO("at45db161d", 0x1f2600, 0, 64 * 1024, 32, SECT_4K) },
{ INFO("at45db321d", 0x1f2700, 0, 64 * 1024, 64, SECT_4K) },
{ INFO("at45db641d", 0x1f2800, 0, 64 * 1024, 128, SECT_4K) },
spi-nor-ids: Add support for Adesto AT25SL321 Add an entry for the Adesto AT25SL321 SPI NOR chip. This SPI NOR chip is found in the Embedded Artist i.MX7ULP COM board. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-10-21 13:51:16 +00:00
{ INFO("at25sl321", 0x1f4216, 0, 64 * 1024, 64, SECT_4K) },
mtd: spi: Add lightweight SPI flash stack for SPL Add a tiny SPI flash stack that just supports reading data/images from SPI flash. This is useful for boards that have SPL size constraints and would need to use SPI flash framework just to read images/data from flash. There is approximately 1.5 to 2KB savings with this. Based on prior work of reducing spi flash id table by Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Tested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Tested-by: Stefan Roese <sr@denx.de> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> #zynq-microzed
2019-02-05 05:59:25 +00:00
{ INFO("at26df081a", 0x1f4501, 0, 64 * 1024, 16, SECT_4K) },
#endif
#ifdef CONFIG_SPI_FLASH_EON /* EON */
/* EON -- en25xxx */
{ INFO("en25q32b", 0x1c3016, 0, 64 * 1024, 64, 0) },
{ INFO("en25q64", 0x1c3017, 0, 64 * 1024, 128, SECT_4K) },
{ INFO("en25qh128", 0x1c7018, 0, 64 * 1024, 256, 0) },
{ INFO("en25s64", 0x1c3817, 0, 64 * 1024, 128, SECT_4K) },
#endif
#ifdef CONFIG_SPI_FLASH_GIGADEVICE /* GIGADEVICE */
/* GigaDevice */
{
INFO("gd25q16", 0xc84015, 0, 64 * 1024, 32,
SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
},
{
INFO("gd25q32", 0xc84016, 0, 64 * 1024, 64,
SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
},
{
INFO("gd25lq32", 0xc86016, 0, 64 * 1024, 64,
SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
},
{
INFO("gd25q64", 0xc84017, 0, 64 * 1024, 128,
SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
},
mtd: spi-nor-ids: Add Gigadevice GD25LQ64C Add GD25LQ24C 64Mbit chip to spi-nor id table. This chip is used on rk3399-gru-kevin: => sf probe SF: Detected gd25lq64c with page size 256 Bytes, erase size 4 KiB, total 8 MiB => sf erase 0x600000 0x200000 SF: 2097152 bytes @ 0x600000 Erased: OK => sf test 0x700000 0x1000 SPI flash test: 0 erase: 52 ticks, 76 KiB/s 0.608 Mbps 1 check: 5 ticks, 800 KiB/s 6.400 Mbps 2 write: 14 ticks, 285 KiB/s 2.280 Mbps 3 read: 3 ticks, 1333 KiB/s 10.664 Mbps Test passed 0 erase: 52 ticks, 76 KiB/s 0.608 Mbps 1 check: 5 ticks, 800 KiB/s 6.400 Mbps 2 write: 14 ticks, 285 KiB/s 2.280 Mbps 3 read: 3 ticks, 1333 KiB/s 10.664 Mbps The values are the same as in Linux, except adjusted for the U-Boot definition of INFO(). Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-10-31 16:20:12 +00:00
{
INFO("gd25lq64c", 0xc86017, 0, 64 * 1024, 128,
SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
},
mtd: spi-nor: ids: Add GigaDevice gd25q128 Add gd25q128 128Mbit chip to spi-nor id table. Tested on Pinebook Pro Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Acked-by: Vignesh Raghavendra <vigneshr@ti.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> # roc-rk3399-pc Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-11-14 00:01:22 +00:00
{
INFO("gd25q128", 0xc84018, 0, 64 * 1024, 256,
SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
},
mtd: spi-nor-ids: Add Gigadevice gd25lq128 ID This adds support for the Gigadevice gd25lq128 ID needed on the upcoming libretech-ac board. SPI_NOR_QUAD_READ is not set since it has not been tested in Quad mode. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-12 09:50:10 +00:00
{
INFO("gd25lq128", 0xc86018, 0, 64 * 1024, 256,
SECT_4K | SPI_NOR_DUAL_READ |
SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
},
mtd: spi: Add lightweight SPI flash stack for SPL Add a tiny SPI flash stack that just supports reading data/images from SPI flash. This is useful for boards that have SPL size constraints and would need to use SPI flash framework just to read images/data from flash. There is approximately 1.5 to 2KB savings with this. Based on prior work of reducing spi flash id table by Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Tested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Tested-by: Stefan Roese <sr@denx.de> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> #zynq-microzed
2019-02-05 05:59:25 +00:00
#endif
#ifdef CONFIG_SPI_FLASH_ISSI /* ISSI */
/* ISSI */
{ INFO("is25lq040b", 0x9d4013, 0, 64 * 1024, 8,
SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ INFO("is25lp032", 0x9d6016, 0, 64 * 1024, 64, 0) },
{ INFO("is25lp064", 0x9d6017, 0, 64 * 1024, 128, 0) },
{ INFO("is25lp128", 0x9d6018, 0, 64 * 1024, 256,
SECT_4K | SPI_NOR_DUAL_READ) },
{ INFO("is25lp256", 0x9d6019, 0, 64 * 1024, 512,
SECT_4K | SPI_NOR_DUAL_READ) },
{ INFO("is25wp032", 0x9d7016, 0, 64 * 1024, 64,
SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ INFO("is25wp064", 0x9d7017, 0, 64 * 1024, 128,
SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ INFO("is25wp128", 0x9d7018, 0, 64 * 1024, 256,
SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
mtd: spi-nor: ids: Add is25wp256 chip Add is25wp256, chip to spi-nor id table. Tested on SiFive FU540 board. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-29 07:42:37 +00:00
{ INFO("is25wp256", 0x9d7019, 0, 64 * 1024, 512,
mtd: spi-nor-ids: Enable 4B_OPCODES for is25wp256 IS25WP256 flash chips do support 4byte address opcodes, so enable support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Sagar Kadam <sagar.kadam@sifive.com>
2020-04-20 10:06:07 +00:00
SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
SPI_NOR_4B_OPCODES) },
mtd: spi: Add lightweight SPI flash stack for SPL Add a tiny SPI flash stack that just supports reading data/images from SPI flash. This is useful for boards that have SPL size constraints and would need to use SPI flash framework just to read images/data from flash. There is approximately 1.5 to 2KB savings with this. Based on prior work of reducing spi flash id table by Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Tested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Tested-by: Stefan Roese <sr@denx.de> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> #zynq-microzed
2019-02-05 05:59:25 +00:00
#endif
#ifdef CONFIG_SPI_FLASH_MACRONIX /* MACRONIX */
/* Macronix */
{ INFO("mx25l2005a", 0xc22012, 0, 64 * 1024, 4, SECT_4K) },
{ INFO("mx25l4005a", 0xc22013, 0, 64 * 1024, 8, SECT_4K) },
{ INFO("mx25l8005", 0xc22014, 0, 64 * 1024, 16, 0) },
{ INFO("mx25l1606e", 0xc22015, 0, 64 * 1024, 32, SECT_4K) },
{ INFO("mx25l3205d", 0xc22016, 0, 64 * 1024, 64, SECT_4K) },
{ INFO("mx25l6405d", 0xc22017, 0, 64 * 1024, 128, SECT_4K) },
{ INFO("mx25u2033e", 0xc22532, 0, 64 * 1024, 4, SECT_4K) },
{ INFO("mx25u1635e", 0xc22535, 0, 64 * 1024, 32, SECT_4K) },
mtd: spi: Add Macronix MX25U3235F device Add Macronix MX25U3235F flash device description. This is a 4MiB part. Signed-off-by: Tom Warren <twarren@nvidia.com>
2020-03-20 21:20:09 +00:00
{ INFO("mx25u3235f", 0xc22536, 0, 4 * 1024, 1024, SECT_4K) },
mtd: spi: Add lightweight SPI flash stack for SPL Add a tiny SPI flash stack that just supports reading data/images from SPI flash. This is useful for boards that have SPL size constraints and would need to use SPI flash framework just to read images/data from flash. There is approximately 1.5 to 2KB savings with this. Based on prior work of reducing spi flash id table by Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Tested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Tested-by: Stefan Roese <sr@denx.de> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> #zynq-microzed
2019-02-05 05:59:25 +00:00
{ INFO("mx25u6435f", 0xc22537, 0, 64 * 1024, 128, SECT_4K) },
mtd: spi-nor-ids: Add SECT_4K to mx25l12805d According to the mx25l12805d datasheet it supports using 4K or 64K sectors. So lets add the SECT_4K to enable 4K sector usage. Datasheet: https://www.mxic.com.tw/Lists/Datasheet/Attachments/7321/MX25L12805D,%203V,%20128Mb,%20v1.2.pdf Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-10-23 08:52:38 +00:00
{ INFO("mx25l12805d", 0xc22018, 0, 64 * 1024, 256, SECT_4K) },
mtd: spi-nor-ids: add support for Macronix mx25u12835f flash Some of Marvell A3700 boards use mx25u12835f, specifically uDPU and ESPRESSObin v7. Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr> [a.heider: adapt commit message to mainline] Signed-off-by: Andre Heider <a.heider@gmail.com>
2020-09-07 06:54:58 +00:00
{ INFO("mx25u12835f", 0xc22538, 0, 64 * 1024, 256, SECT_4K) },
mtd: spi: Add lightweight SPI flash stack for SPL Add a tiny SPI flash stack that just supports reading data/images from SPI flash. This is useful for boards that have SPL size constraints and would need to use SPI flash framework just to read images/data from flash. There is approximately 1.5 to 2KB savings with this. Based on prior work of reducing spi flash id table by Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Tested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Tested-by: Stefan Roese <sr@denx.de> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> #zynq-microzed
2019-02-05 05:59:25 +00:00
{ INFO("mx25l12855e", 0xc22618, 0, 64 * 1024, 256, 0) },
{ INFO("mx25l25635e", 0xc22019, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ INFO("mx25u25635f", 0xc22539, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_4B_OPCODES) },
{ INFO("mx25l25655e", 0xc22619, 0, 64 * 1024, 512, 0) },
{ INFO("mx66l51235l", 0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
{ INFO("mx66u51235f", 0xc2253a, 0, 64 * 1024, 1024, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
mtd: spi: Add Macronix MX66U2G45F device Add Macronix MX66U2G45F flash device description. This is a 256 MiB part. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Cc: Vignesh R <vigneshr@ti.com> [jagan: use 'g' instead of 'f' in flash name] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-03-07 22:27:46 +00:00
{ INFO("mx66u2g45g", 0xc2253c, 0, 64 * 1024, 4096, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
mtd: spi: Add lightweight SPI flash stack for SPL Add a tiny SPI flash stack that just supports reading data/images from SPI flash. This is useful for boards that have SPL size constraints and would need to use SPI flash framework just to read images/data from flash. There is approximately 1.5 to 2KB savings with this. Based on prior work of reducing spi flash id table by Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Tested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Tested-by: Stefan Roese <sr@denx.de> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> #zynq-microzed
2019-02-05 05:59:25 +00:00
{ INFO("mx66l1g45g", 0xc2201b, 0, 64 * 1024, 2048, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ INFO("mx25l1633e", 0xc22415, 0, 64 * 1024, 32, SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES | SECT_4K) },
sf: Add Macronix MX25R6435F SPI NOR flash to flash parameters array On i.mx7ulp EVK board, we use MX25R6435F NOR flash, add its parameters and IDs to flash parameter array. Otherwise, the flash probe will fails. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-03 13:02:56 +00:00
{ INFO("mx25r6435f", 0xc22817, 0, 64 * 1024, 128, SECT_4K) },
mtd: spi-nor-ids: Add Macronix MX66UW2G345G The MX66UW2G345G is Macronix Flash with SINGLE and OCTAL I/O. Hence, add SPI_NOR_OCTAL_READ flag for this flash. Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> [jagan: change order of id flags] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: zhengxun <zhengxunli.mxic@gmail.com>
2021-03-23 13:16:47 +00:00
{ INFO("mx66uw2g345g", 0xc2943c, 0, 64 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_READ | SPI_NOR_4B_OPCODES) },
mtd: spi: Add lightweight SPI flash stack for SPL Add a tiny SPI flash stack that just supports reading data/images from SPI flash. This is useful for boards that have SPL size constraints and would need to use SPI flash framework just to read images/data from flash. There is approximately 1.5 to 2KB savings with this. Based on prior work of reducing spi flash id table by Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Tested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Tested-by: Stefan Roese <sr@denx.de> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> #zynq-microzed
2019-02-05 05:59:25 +00:00
#endif
#ifdef CONFIG_SPI_FLASH_STMICRO /* STMICRO */
/* Micron */
{ INFO("n25q016a", 0x20bb15, 0, 64 * 1024, 32, SECT_4K | SPI_NOR_QUAD_READ) },
{ INFO("n25q032", 0x20ba16, 0, 64 * 1024, 64, SPI_NOR_QUAD_READ) },
{ INFO("n25q032a", 0x20bb16, 0, 64 * 1024, 64, SPI_NOR_QUAD_READ) },
{ INFO("n25q064", 0x20ba17, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_QUAD_READ) },
{ INFO("n25q064a", 0x20bb17, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_QUAD_READ) },
{ INFO("n25q128a11", 0x20bb18, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_QUAD_READ) },
{ INFO("n25q128a13", 0x20ba18, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_QUAD_READ) },
spi-nor: spi-nor-ids: Add USE_FSR flag for mt25q* and n25q* entry n25q* and mt25q* (both 256Mb and 512Mb) flashes support Flag status register that indicates various errors that may be encountered during erase/write operations. Therefore add USE_FSR flag wherever missing. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-10-11 07:58:20 +00:00
{ INFO6("mt25ql256a", 0x20ba19, 0x104400, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES | USE_FSR) },
{ INFO("n25q256a", 0x20ba19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_FSR) },
{ INFO6("mt25qu256a", 0x20bb19, 0x104400, 64 * 1024, 512, SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES | USE_FSR) },
{ INFO("n25q256ax1", 0x20bb19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_QUAD_READ | USE_FSR) },
mtd: spi: Add flash property for Micron mt25qu512a mt25qu512a is rebranded after its spinoff from STM, so it is different only in term of extended jedec ID, initial JEDEC id is same as that of n25q512a.In order to avoid any confussion with respect to name new entry is added. This flash is tested for Single I/O mode on LS1046FRWY although it also support QUAD I/O. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-07-17 06:15:00 +00:00
{ INFO6("mt25qu512a", 0x20bb20, 0x104400, 64 * 1024, 1024,
spi-nor: spi-nor-ids: Add USE_FSR flag for mt25q* and n25q* entry n25q* and mt25q* (both 256Mb and 512Mb) flashes support Flag status register that indicates various errors that may be encountered during erase/write operations. Therefore add USE_FSR flag wherever missing. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-10-11 07:58:20 +00:00
SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES |
USE_FSR) },
spi-nor: spi-nor-ids: Disable SPI_NOR_4B_OPCODES for n25q512* and n25q256* Per datasheets of n25q256* and n25q512* not all variants of n25q256* and n25q512* support 4 Byte stateless addressing opcodes. Therefore drop SPI_NOR_4B_OPCODES flag from these entries Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Tested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-10-11 07:58:18 +00:00
{ INFO("n25q512a", 0x20bb20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
spi-nor: spi-nor-ids: Add entries for mt25q variants mt25q* flashes support stateless 4 byte addressing opcodes. Add entries for the same. These flashes have bit 6 set in 5th byte of READ ID response when compared to n25q* variants. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Tested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-10-11 07:58:19 +00:00
{ INFO6("mt25ql512a", 0x20ba20, 0x104400, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
spi-nor: spi-nor-ids: Disable SPI_NOR_4B_OPCODES for n25q512* and n25q256* Per datasheets of n25q256* and n25q512* not all variants of n25q256* and n25q512* support 4 Byte stateless addressing opcodes. Therefore drop SPI_NOR_4B_OPCODES flag from these entries Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Tested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-10-11 07:58:18 +00:00
{ INFO("n25q512ax3", 0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
mtd: spi: Add lightweight SPI flash stack for SPL Add a tiny SPI flash stack that just supports reading data/images from SPI flash. This is useful for boards that have SPL size constraints and would need to use SPI flash framework just to read images/data from flash. There is approximately 1.5 to 2KB savings with this. Based on prior work of reducing spi flash id table by Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Tested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Tested-by: Stefan Roese <sr@denx.de> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> #zynq-microzed
2019-02-05 05:59:25 +00:00
{ INFO("n25q00", 0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
{ INFO("n25q00a", 0x20bb21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
mtd: spi-nor-ids: add Micron MT25QL01G flash Add Micron MT25QL01G flash, used on AST2600 board. Signed-off-by: Hongwei Zhang <hongweiz@ami.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-12-07 22:40:01 +00:00
{ INFO("mt25ql01g", 0x21ba20, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
mtd: spi: Add lightweight SPI flash stack for SPL Add a tiny SPI flash stack that just supports reading data/images from SPI flash. This is useful for boards that have SPL size constraints and would need to use SPI flash framework just to read images/data from flash. There is approximately 1.5 to 2KB savings with this. Based on prior work of reducing spi flash id table by Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Tested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Tested-by: Stefan Roese <sr@denx.de> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> #zynq-microzed
2019-02-05 05:59:25 +00:00
{ INFO("mt25qu02g", 0x20bb22, 0, 64 * 1024, 4096, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
mtd: spi-nor-ids: Enable SPI_NOR_OCTAL_READ flag for mt35xu* Commit 658df8bd9464 ("mtd: spi-nor-core: Add octal mode support") enables octal mode(1-1-8) support in spi-nor framework. mt35xu512aba and mt35xu02g supports SINGLE and OCTAL I/O. Hence, enable SPI_NOR_OCTAL_READ flag for these flashes. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-03-14 12:53:54 +00:00
{ INFO("mt35xu512aba", 0x2c5b1a, 0, 128 * 1024, 512, USE_FSR | SPI_NOR_OCTAL_READ | SPI_NOR_4B_OPCODES) },
{ INFO("mt35xu02g", 0x2c5b1c, 0, 128 * 1024, 2048, USE_FSR | SPI_NOR_OCTAL_READ | SPI_NOR_4B_OPCODES) },
mtd: spi: Add lightweight SPI flash stack for SPL Add a tiny SPI flash stack that just supports reading data/images from SPI flash. This is useful for boards that have SPL size constraints and would need to use SPI flash framework just to read images/data from flash. There is approximately 1.5 to 2KB savings with this. Based on prior work of reducing spi flash id table by Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Tested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Tested-by: Stefan Roese <sr@denx.de> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> #zynq-microzed
2019-02-05 05:59:25 +00:00
#endif
#ifdef CONFIG_SPI_FLASH_SPANSION /* SPANSION */
/* Spansion/Cypress -- single (large) sector size only, at least
* for the chips listed here (without boot sectors).
*/
{ INFO("s25sl032p", 0x010215, 0x4d00, 64 * 1024, 64, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ INFO("s25sl064p", 0x010216, 0x4d00, 64 * 1024, 128, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
mtd: spi-nor: Enable dual and quad read for s25fl256s0 The s25fl256s0 supports dual and quad read like s25fl256s1. Enable it by adding SPI_NOR_DUAL_READ and SPI_NOR_QUAD_READ flags to the flash_info entry. Tested on real silicon and confirmed to be working. Signed-off-by: Bacem Daassi <Bacem.Daassi@cypress.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-03-27 18:58:14 +00:00
{ INFO("s25fl256s0", 0x010219, 0x4d00, 256 * 1024, 128, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
mtd: spi: Add lightweight SPI flash stack for SPL Add a tiny SPI flash stack that just supports reading data/images from SPI flash. This is useful for boards that have SPL size constraints and would need to use SPI flash framework just to read images/data from flash. There is approximately 1.5 to 2KB savings with this. Based on prior work of reducing spi flash id table by Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Tested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Tested-by: Stefan Roese <sr@denx.de> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> #zynq-microzed
2019-02-05 05:59:25 +00:00
{ INFO("s25fl256s1", 0x010219, 0x4d01, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
mtd: spi-nor-ids: Add Spansion s25fs512s flash entry Spansion "s25fs512s" flash is incorrectly decoded as "s25fl512s" on various platforms as former is not present. Add the entry. Linux already has both the flashes present. A snippet below: { "s25fl512s", INFO6(0x010220, 0x4d0080, 256 * 1024, 256...}, { "s25fs512s", INFO6(0x010220, 0x4d0081, 256 * 1024, 256...}, Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-04-03 06:57:42 +00:00
{ INFO6("s25fl512s", 0x010220, 0x4d0080, 256 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
{ INFO6("s25fs512s", 0x010220, 0x4d0081, 256 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
mtd: spi: Add lightweight SPI flash stack for SPL Add a tiny SPI flash stack that just supports reading data/images from SPI flash. This is useful for boards that have SPL size constraints and would need to use SPI flash framework just to read images/data from flash. There is approximately 1.5 to 2KB savings with this. Based on prior work of reducing spi flash id table by Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Tested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Tested-by: Stefan Roese <sr@denx.de> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> #zynq-microzed
2019-02-05 05:59:25 +00:00
{ INFO("s25fl512s_256k", 0x010220, 0x4d00, 256 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
{ INFO("s25fl512s_64k", 0x010220, 0x4d01, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
{ INFO("s25fl512s_512k", 0x010220, 0x4f00, 256 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
{ INFO("s25sl12800", 0x012018, 0x0300, 256 * 1024, 64, 0) },
{ INFO("s25sl12801", 0x012018, 0x0301, 64 * 1024, 256, 0) },
{ INFO6("s25fl128s", 0x012018, 0x4d0180, 64 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
{ INFO("s25fl129p0", 0x012018, 0x4d00, 256 * 1024, 64, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
{ INFO("s25fl129p1", 0x012018, 0x4d01, 64 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
{ INFO("s25sl008a", 0x010213, 0, 64 * 1024, 16, 0) },
{ INFO("s25sl016a", 0x010214, 0, 64 * 1024, 32, 0) },
{ INFO("s25sl032a", 0x010215, 0, 64 * 1024, 64, 0) },
{ INFO("s25sl064a", 0x010216, 0, 64 * 1024, 128, 0) },
{ INFO("s25fl116k", 0x014015, 0, 64 * 1024, 32, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ INFO("s25fl164k", 0x014017, 0, 64 * 1024, 128, SECT_4K) },
{ INFO("s25fl208k", 0x014014, 0, 64 * 1024, 16, SECT_4K | SPI_NOR_DUAL_READ) },
mtd: add spi flash id s25fl064l Add support for SPANSION s25fl064l Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Jagan Teki <jagan@openedev.com> Acked-by: Vignesh R <vigneshr@ti.com>
2019-02-08 10:03:39 +00:00
{ INFO("s25fl064l", 0x016017, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
mtd: spi: Add lightweight SPI flash stack for SPL Add a tiny SPI flash stack that just supports reading data/images from SPI flash. This is useful for boards that have SPL size constraints and would need to use SPI flash framework just to read images/data from flash. There is approximately 1.5 to 2KB savings with this. Based on prior work of reducing spi flash id table by Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Tested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Tested-by: Stefan Roese <sr@denx.de> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> #zynq-microzed
2019-02-05 05:59:25 +00:00
{ INFO("s25fl128l", 0x016018, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
#endif
#ifdef CONFIG_SPI_FLASH_SST /* SST */
/* SST -- large erase sizes are "overlays", "sectors" are 4K */
{ INFO("sst25vf040b", 0xbf258d, 0, 64 * 1024, 8, SECT_4K | SST_WRITE) },
{ INFO("sst25vf080b", 0xbf258e, 0, 64 * 1024, 16, SECT_4K | SST_WRITE) },
{ INFO("sst25vf016b", 0xbf2541, 0, 64 * 1024, 32, SECT_4K | SST_WRITE) },
{ INFO("sst25vf032b", 0xbf254a, 0, 64 * 1024, 64, SECT_4K | SST_WRITE) },
{ INFO("sst25vf064c", 0xbf254b, 0, 64 * 1024, 128, SECT_4K) },
{ INFO("sst25wf512", 0xbf2501, 0, 64 * 1024, 1, SECT_4K | SST_WRITE) },
{ INFO("sst25wf010", 0xbf2502, 0, 64 * 1024, 2, SECT_4K | SST_WRITE) },
{ INFO("sst25wf020", 0xbf2503, 0, 64 * 1024, 4, SECT_4K | SST_WRITE) },
{ INFO("sst25wf020a", 0x621612, 0, 64 * 1024, 4, SECT_4K) },
{ INFO("sst25wf040b", 0x621613, 0, 64 * 1024, 8, SECT_4K) },
{ INFO("sst25wf040", 0xbf2504, 0, 64 * 1024, 8, SECT_4K | SST_WRITE) },
{ INFO("sst25wf080", 0xbf2505, 0, 64 * 1024, 16, SECT_4K | SST_WRITE) },
mtd: spi-nor: enable protection ops for SST26 flash series Commit c4e8862308d4 (mtd: spi: Switch to new SPI NOR framework) performs switch from previous 'spi_flash' infrastructure without proper testing/investigations which results in a regressions for SST26 flash series. Enable protection ops for SST26 flash series which were previously enabled by Commit 3d4fed87a5fa (mtd: sf: Add support of sst26wf* flash ICs protection ops) Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-09-09 19:33:15 +00:00
{ INFO("sst26vf064b", 0xbf2643, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_HAS_SST26LOCK | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ INFO("sst26wf016", 0xbf2651, 0, 64 * 1024, 32, SECT_4K | SPI_NOR_HAS_SST26LOCK) },
{ INFO("sst26wf032", 0xbf2622, 0, 64 * 1024, 64, SECT_4K | SPI_NOR_HAS_SST26LOCK) },
{ INFO("sst26wf064", 0xbf2643, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_HAS_SST26LOCK) },
mtd: spi: Add lightweight SPI flash stack for SPL Add a tiny SPI flash stack that just supports reading data/images from SPI flash. This is useful for boards that have SPL size constraints and would need to use SPI flash framework just to read images/data from flash. There is approximately 1.5 to 2KB savings with this. Based on prior work of reducing spi flash id table by Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Tested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Tested-by: Stefan Roese <sr@denx.de> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> #zynq-microzed
2019-02-05 05:59:25 +00:00
#endif
#ifdef CONFIG_SPI_FLASH_STMICRO /* STMICRO */
/* ST Microelectronics -- newer production may have feature updates */
{ INFO("m25p10", 0x202011, 0, 32 * 1024, 4, 0) },
{ INFO("m25p20", 0x202012, 0, 64 * 1024, 4, 0) },
{ INFO("m25p40", 0x202013, 0, 64 * 1024, 8, 0) },
{ INFO("m25p80", 0x202014, 0, 64 * 1024, 16, 0) },
{ INFO("m25p16", 0x202015, 0, 64 * 1024, 32, 0) },
{ INFO("m25p32", 0x202016, 0, 64 * 1024, 64, 0) },
{ INFO("m25p64", 0x202017, 0, 64 * 1024, 128, 0) },
{ INFO("m25p128", 0x202018, 0, 256 * 1024, 64, 0) },
{ INFO("m25pe16", 0x208015, 0, 64 * 1024, 32, SECT_4K) },
{ INFO("m25px16", 0x207115, 0, 64 * 1024, 32, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ INFO("m25px64", 0x207117, 0, 64 * 1024, 128, 0) },
#endif
#ifdef CONFIG_SPI_FLASH_WINBOND /* WINBOND */
/* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */
{ INFO("w25p80", 0xef2014, 0x0, 64 * 1024, 16, 0) },
{ INFO("w25p16", 0xef2015, 0x0, 64 * 1024, 32, 0) },
{ INFO("w25p32", 0xef2016, 0x0, 64 * 1024, 64, 0) },
{ INFO("w25x05", 0xef3010, 0, 64 * 1024, 1, SECT_4K) },
{ INFO("w25x40", 0xef3013, 0, 64 * 1024, 8, SECT_4K) },
{ INFO("w25x16", 0xef3015, 0, 64 * 1024, 32, SECT_4K) },
{
INFO("w25q16dw", 0xef6015, 0, 64 * 1024, 32,
SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
},
{ INFO("w25x32", 0xef3016, 0, 64 * 1024, 64, SECT_4K) },
{ INFO("w25q20cl", 0xef4012, 0, 64 * 1024, 4, SECT_4K) },
{ INFO("w25q20bw", 0xef5012, 0, 64 * 1024, 4, SECT_4K) },
{ INFO("w25q20ew", 0xef6012, 0, 64 * 1024, 4, SECT_4K) },
{ INFO("w25q32", 0xef4016, 0, 64 * 1024, 64, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{
INFO("w25q32dw", 0xef6016, 0, 64 * 1024, 64,
SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
},
{
INFO("w25q32jv", 0xef7016, 0, 64 * 1024, 64,
SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
},
mtd: spi-nor-ids: add Winbond W25Q32JW-IM flash The Kontron SMARC-sAL28 board uses that flash. This is the same change as in the linux commit f3418718c0ec ("mtd: spi-nor: Add support for w25q32jwm"). Signed-off-by: Michael Walle <michael@walle.cc> Reported-by: Leo Krueger <leo.krueger@zal.aero>
2020-11-30 23:12:39 +00:00
{
INFO("w25q32jwm", 0xef8016, 0, 64 * 1024, 64,
SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
},
mtd: spi: Add lightweight SPI flash stack for SPL Add a tiny SPI flash stack that just supports reading data/images from SPI flash. This is useful for boards that have SPL size constraints and would need to use SPI flash framework just to read images/data from flash. There is approximately 1.5 to 2KB savings with this. Based on prior work of reducing spi flash id table by Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Tested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Tested-by: Stefan Roese <sr@denx.de> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> #zynq-microzed
2019-02-05 05:59:25 +00:00
{ INFO("w25x64", 0xef3017, 0, 64 * 1024, 128, SECT_4K) },
{
INFO("w25q64dw", 0xef6017, 0, 64 * 1024, 128,
SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
},
{
INFO("w25q64jv", 0xef7017, 0, 64 * 1024, 128,
SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
},
{
INFO("w25q128fw", 0xef6018, 0, 64 * 1024, 256,
SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
},
{
INFO("w25q128jv", 0xef7018, 0, 64 * 1024, 256,
SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
},
{
INFO("w25q256fw", 0xef6019, 0, 64 * 1024, 512,
SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
},
{
INFO("w25q256jw", 0xef7019, 0, 64 * 1024, 512,
SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
},
{ INFO("w25q80", 0xef5014, 0, 64 * 1024, 16, SECT_4K) },
{ INFO("w25q80bl", 0xef4014, 0, 64 * 1024, 16, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ INFO("w25q16cl", 0xef4015, 0, 64 * 1024, 32, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ INFO("w25q64cv", 0xef4017, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
mtd: spi-nor-ids: Add support of flash protection to w25q128 The NOR flash w25q128 denoted by JEDEC ID 0xef4018 actually represents various models. From Winbond's website, I could only find 3 types of them: W25Q128JV-IQ/JQ datasheet:https://www.winbond.com/resource-files/ w25q128jv%20revg%2004082019%20plus.pdf W25Q128FV (SPI Mode) datasheet: https://www.winbond.com/resource-files/ w25q128fv%20rev.m%2005132016%20kms.pdf W25Q128BV datesheet: https://www.winbond.com/resource-files/ w25q128bv_revh_100313_wo_automotive.pdf According to the datasheets, all of these 3 types support BP(0,1,2) and TB bits in the status register (SR), so it could reuse the flash protection logic for ST Micro. So it should be safe to add the SPI_NOR_HAS_LOCK and SPI_NOR_HAS_TB flags to the w25q128 entry of spi_nor_ids table. Signed-off-by: Su Baocheng <baocheng.su@siemens.com> [jagan: remove comments in spi-nor-ids.c] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2021-01-25 02:59:05 +00:00
{ INFO("w25q128", 0xef4018, 0, 64 * 1024, 256,
SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
},
mtd: spi: Add lightweight SPI flash stack for SPL Add a tiny SPI flash stack that just supports reading data/images from SPI flash. This is useful for boards that have SPL size constraints and would need to use SPI flash framework just to read images/data from flash. There is approximately 1.5 to 2KB savings with this. Based on prior work of reducing spi flash id table by Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Tested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Tested-by: Stefan Roese <sr@denx.de> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> #zynq-microzed
2019-02-05 05:59:25 +00:00
{ INFO("w25q256", 0xef4019, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
mtd: spi-nor-ids: Add Winbond W25M512JW flash entry Add Winbond W25M512JW flash device description. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-09-29 10:04:02 +00:00
{ INFO("w25m512jw", 0xef6119, 0, 64 * 1024, 1024, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
mtd: spi-nor-ids: Add Winbond W25M512JV flash entry Add Winbond W25M512JV flash device description. Linux already has the flash entry present. A snippet below: { "w25m512jv", INFO(0xef7119, 0, 64 * 1024, 1024...}, Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-09-17 14:50:30 +00:00
{ INFO("w25m512jv", 0xef7119, 0, 64 * 1024, 1024, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
mtd: spi: Add lightweight SPI flash stack for SPL Add a tiny SPI flash stack that just supports reading data/images from SPI flash. This is useful for boards that have SPL size constraints and would need to use SPI flash framework just to read images/data from flash. There is approximately 1.5 to 2KB savings with this. Based on prior work of reducing spi flash id table by Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Tested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Tested-by: Stefan Roese <sr@denx.de> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> #zynq-microzed
2019-02-05 05:59:25 +00:00
#endif
#ifdef CONFIG_SPI_FLASH_XMC
/* XMC (Wuhan Xinxin Semiconductor Manufacturing Corp.) */
{ INFO("XM25QH64A", 0x207017, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ INFO("XM25QH128A", 0x207018, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
#endif
{ },
};
Reference in a new issue Copy permalink