u-boot/board/gdsys/common/phy.c

280 lines
6.1 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2014
* Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc
*/
#include <common.h>
#include <miiphy.h>
enum {
MIICMD_SET,
MIICMD_MODIFY,
MIICMD_VERIFY_VALUE,
MIICMD_WAIT_FOR_VALUE,
};
struct mii_setupcmd {
u8 token;
u8 reg;
u16 data;
u16 mask;
u32 timeout;
};
/*
* verify we are talking to a 88e1518
*/
struct mii_setupcmd verify_88e1518[] = {
{ MIICMD_SET, 22, 0x0000 },
{ MIICMD_VERIFY_VALUE, 2, 0x0141, 0xffff },
{ MIICMD_VERIFY_VALUE, 3, 0x0dd0, 0xfff0 },
};
/*
* workaround for erratum mentioned in 88E1518 release notes
*/
struct mii_setupcmd fixup_88e1518[] = {
{ MIICMD_SET, 22, 0x00ff },
{ MIICMD_SET, 17, 0x214b },
{ MIICMD_SET, 16, 0x2144 },
{ MIICMD_SET, 17, 0x0c28 },
{ MIICMD_SET, 16, 0x2146 },
{ MIICMD_SET, 17, 0xb233 },
{ MIICMD_SET, 16, 0x214d },
{ MIICMD_SET, 17, 0xcc0c },
{ MIICMD_SET, 16, 0x2159 },
{ MIICMD_SET, 22, 0x00fb },
{ MIICMD_SET, 7, 0xc00d },
{ MIICMD_SET, 22, 0x0000 },
};
/*
* default initialization:
* - set RGMII receive timing to "receive clock transition when data stable"
* - set RGMII transmit timing to "transmit clock internally delayed"
* - set RGMII output impedance target to 78,8 Ohm
* - run output impedance calibration
* - set autonegotiation advertise to 1000FD only
*/
struct mii_setupcmd default_88e1518[] = {
{ MIICMD_SET, 22, 0x0002 },
{ MIICMD_MODIFY, 21, 0x0030, 0x0030 },
{ MIICMD_MODIFY, 25, 0x0000, 0x0003 },
{ MIICMD_MODIFY, 24, 0x8000, 0x8000 },
{ MIICMD_WAIT_FOR_VALUE, 24, 0x4000, 0x4000, 2000 },
{ MIICMD_SET, 22, 0x0000 },
{ MIICMD_MODIFY, 4, 0x0000, 0x01e0 },
{ MIICMD_MODIFY, 9, 0x0200, 0x0300 },
};
/*
* turn off CLK125 for PHY daughterboard
*/
struct mii_setupcmd ch1fix_88e1518[] = {
{ MIICMD_SET, 22, 0x0002 },
{ MIICMD_MODIFY, 16, 0x0006, 0x0006 },
{ MIICMD_SET, 22, 0x0000 },
};
/*
* perform copper software reset
*/
struct mii_setupcmd swreset_88e1518[] = {
{ MIICMD_SET, 22, 0x0000 },
{ MIICMD_MODIFY, 0, 0x8000, 0x8000 },
{ MIICMD_WAIT_FOR_VALUE, 0, 0x0000, 0x8000, 2000 },
};
/*
* special one for 88E1514:
* Force SGMII to Copper mode
*/
struct mii_setupcmd mii_to_copper_88e1514[] = {
{ MIICMD_SET, 22, 0x0012 },
{ MIICMD_MODIFY, 20, 0x0001, 0x0007 },
{ MIICMD_MODIFY, 20, 0x8000, 0x8000 },
{ MIICMD_SET, 22, 0x0000 },
};
/*
* turn off SGMII auto-negotiation
*/
struct mii_setupcmd sgmii_autoneg_off_88e1518[] = {
{ MIICMD_SET, 22, 0x0001 },
{ MIICMD_MODIFY, 0, 0x0000, 0x1000 },
{ MIICMD_MODIFY, 0, 0x8000, 0x8000 },
{ MIICMD_SET, 22, 0x0000 },
};
/*
* invert LED2 polarity
*/
struct mii_setupcmd invert_led2_88e1514[] = {
{ MIICMD_SET, 22, 0x0003 },
{ MIICMD_MODIFY, 17, 0x0030, 0x0010 },
{ MIICMD_SET, 22, 0x0000 },
};
static int process_setupcmd(const char *bus, unsigned char addr,
struct mii_setupcmd *setupcmd)
{
int res;
u8 reg = setupcmd->reg;
u16 data = setupcmd->data;
u16 mask = setupcmd->mask;
u32 timeout = setupcmd->timeout;
u16 orig_data;
unsigned long start;
debug("mii %s:%u reg %2u ", bus, addr, reg);
switch (setupcmd->token) {
case MIICMD_MODIFY:
res = miiphy_read(bus, addr, reg, &orig_data);
if (res)
break;
debug("is %04x. (value %04x mask %04x) ", orig_data, data,
mask);
data = (orig_data & ~mask) | (data & mask);
/* fallthrough */
case MIICMD_SET:
debug("=> %04x\n", data);
res = miiphy_write(bus, addr, reg, data);
break;
case MIICMD_VERIFY_VALUE:
res = miiphy_read(bus, addr, reg, &orig_data);
if (res)
break;
if ((orig_data & mask) != (data & mask))
res = -1;
debug("(value %04x mask %04x) == %04x? %s\n", data, mask,
orig_data, res ? "FAIL" : "PASS");
break;
case MIICMD_WAIT_FOR_VALUE:
res = -1;
start = get_timer(0);
while ((res != 0) && (get_timer(start) < timeout)) {
res = miiphy_read(bus, addr, reg, &orig_data);
if (res)
continue;
if ((orig_data & mask) != (data & mask))
res = -1;
}
debug("(value %04x mask %04x) == %04x? %s after %lu ms\n", data,
mask, orig_data, res ? "FAIL" : "PASS",
get_timer(start));
break;
default:
res = -1;
break;
}
return res;
}
static int process_setup(const char *bus, unsigned char addr,
struct mii_setupcmd *setupcmd, unsigned int count)
{
int res = 0;
unsigned int k;
for (k = 0; k < count; ++k) {
res = process_setupcmd(bus, addr, &setupcmd[k]);
if (res) {
printf("mii cmd %u on bus %s addr %u failed, aborting setup\n",
setupcmd[k].token, bus, addr);
break;
}
}
return res;
}
int setup_88e1518(const char *bus, unsigned char addr)
{
int res;
res = process_setup(bus, addr,
verify_88e1518, ARRAY_SIZE(verify_88e1518));
if (res)
return res;
res = process_setup(bus, addr,
fixup_88e1518, ARRAY_SIZE(fixup_88e1518));
if (res)
return res;
res = process_setup(bus, addr,
default_88e1518, ARRAY_SIZE(default_88e1518));
if (res)
return res;
if (addr) {
res = process_setup(bus, addr,
ch1fix_88e1518, ARRAY_SIZE(ch1fix_88e1518));
if (res)
return res;
}
res = process_setup(bus, addr,
swreset_88e1518, ARRAY_SIZE(swreset_88e1518));
if (res)
return res;
return 0;
}
int setup_88e1514(const char *bus, unsigned char addr)
{
int res;
res = process_setup(bus, addr,
verify_88e1518, ARRAY_SIZE(verify_88e1518));
if (res)
return res;
res = process_setup(bus, addr,
fixup_88e1518, ARRAY_SIZE(fixup_88e1518));
if (res)
return res;
res = process_setup(bus, addr,
mii_to_copper_88e1514,
ARRAY_SIZE(mii_to_copper_88e1514));
if (res)
return res;
res = process_setup(bus, addr,
sgmii_autoneg_off_88e1518,
ARRAY_SIZE(sgmii_autoneg_off_88e1518));
if (res)
return res;
res = process_setup(bus, addr,
invert_led2_88e1514,
ARRAY_SIZE(invert_led2_88e1514));
if (res)
return res;
res = process_setup(bus, addr,
default_88e1518, ARRAY_SIZE(default_88e1518));
if (res)
return res;
if (addr) {
res = process_setup(bus, addr,
ch1fix_88e1518, ARRAY_SIZE(ch1fix_88e1518));
if (res)
return res;
}
res = process_setup(bus, addr,
swreset_88e1518, ARRAY_SIZE(swreset_88e1518));
if (res)
return res;
return 0;
}