u-boot/configs/rpi_2_defconfig

CONFIG_ARM=y
CONFIG_ARCH_BCM283X=y
CONFIG_TARGET_RPI_2=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_SYS_PROMPT="U-Boot> "
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
CONFIG_PHYS_TO_BUS=y
CONFIG_OF_LIBFDT=y
rpi: add support for Raspberry Pi 2 model B USB doesn't seem to work yet; the controller detects the on-board Hub/ Ethernet device but can't read the descriptors from it. I haven't investigated yet. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> 2015-02-16 19:16:15 +00:00			`CONFIG_ARM=y`
ARM: bcm283x: merge BCM2835/BCM2836 directories into mach-bcm283x BCM2835 (used on Raspberry Pi) and BCM2836 (used on Raspberry Pi 2) are similar enough. One of the biggest differences is the ARM processor. It is reasonable to collect the source files into a single place, arch/arm/mach-bcm283x/. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> 2015-03-19 10:42:56 +00:00			`CONFIG_ARCH_BCM283X=y`
rpi: add support for Raspberry Pi 2 model B USB doesn't seem to work yet; the controller detects the on-board Hub/ Ethernet device but can't read the descriptors from it. I haven't investigated yet. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> 2015-02-16 19:16:15 +00:00			`CONFIG_TARGET_RPI_2=y`
Kconfig: Move CONFIG_FIT and related options to Kconfig There are already two FIT options in Kconfig but the CONFIG options are still in the header files. We need to do a proper move to fix this. Move these options to Kconfig and tidy up board configuration: CONFIG_FIT CONFIG_OF_BOARD_SETUP CONFIG_OF_SYSTEM_SETUP CONFIG_FIT_SIGNATURE CONFIG_FIT_BEST_MATCH CONFIG_FIT_VERBOSE CONFIG_OF_STDOUT_VIA_ALIAS CONFIG_RSA Unfortunately the first one is a little complicated. We need to make sure this option is not enabled in SPL by this change. Also this option is enabled automatically in the host builds by defining CONFIG_FIT in the image.h file. To solve this, add a new IMAGE_USE_FIT #define which can be used in files that are built on the host but must also build for U-Boot and SPL. Note: Masahiro's moveconfig.py script is amazing. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Add microblaze change, various configs/ re-applies] Signed-off-by: Tom Rini <trini@konsulko.com> 2016-02-23 05:55:43 +00:00			`CONFIG_OF_BOARD_SETUP=y`
Reorder defconfigs with 'savedefconfig' Some boards' defconfigs are disordered. Reorder them. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> 2015-09-28 12:14:15 +00:00			`CONFIG_SYS_PROMPT="U-Boot> "`
Move defaults from config_cmd_default.h to Kconfig This sets the default commands Kconfig to match include/config_cmd_default.h commands in the common/Kconfig and removes them from include/configs. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates] Signed-off-by: Tom Rini <trini@konsulko.com> 2015-06-22 21:15:30 +00:00			`# CONFIG_CMD_IMLS is not set`
			`# CONFIG_CMD_FLASH is not set`
			`# CONFIG_CMD_FPGA is not set`
common: add CMD_GPIO to Kconfig Add CMD_GPIO to Kconfig and run tools/moveconfig.py . Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Simon Glass <sjg@chromium.org> 2015-11-11 13:39:33 +00:00			`CONFIG_CMD_GPIO=y`
Move default y configs out of arch/board Kconfig Some archs/boards specify their own default by pre-defining the config which causes the Kconfig system to mix up the order of the configs in the defconfigs... This will cause merge pain if allowed to proliferate. Remove the configs that behave this way from the archs. A few configs still remain, but that is because they only exist as defaults and do not have a proper Kconfig entry. Those appear to be: SPIFLASH DISPLAY_BOARDINFO Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates, drop DM_USB from MSI_Primo81 as USB_MUSB_SUNXI isn't converted yet to DM] Signed-off-by: Tom Rini <trini@konsulko.com> 2015-06-22 21:15:29 +00:00			`CONFIG_PHYS_TO_BUS=y`
Move CONFIG_OF_LIBFDT to Kconfig Move this option to Kconfig and tidy up existing boards. Signed-off-by: Simon Glass <sjg@chromium.org> 2016-02-23 05:55:42 +00:00			`CONFIG_OF_LIBFDT=y`