u-boot/arch/arm/dts/fsl-ls1088a-rdb.dts

// SPDX-License-Identifier: GPL-2.0+ OR X11
/*
 * NXP ls1088a RDB board device tree source
 *
 * Copyright 2017 NXP
 */

/dts-v1/;

#include "fsl-ls1088a.dtsi"

/ {
	model = "NXP Layerscape 1088a RDB Board";
	compatible = "fsl,ls1088a-rdb", "fsl,ls1088a";
	aliases {
		spi0 = &qspi;
	};
};

&qspi {
	bus-num = <0>;
	status = "okay";

	qflash0: s25fs512s@0 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "spi-flash";
		spi-max-frequency = <50000000>;
		reg = <0>;
	};

	qflash1: s25fs512s@1 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "spi-flash";
		spi-max-frequency = <50000000>;
		reg = <1>;
	 };
};
SPDX: Convert all of our multiple license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have multiple licenses (in these cases, dual license) declared in the SPDX-License-Identifier tag. In this case we change from listing "LICENSE-A LICENSE-B" or "LICENSE-A or LICENSE-B" or "(LICENSE-A OR LICENSE-B)" to "LICENSE-A OR LICENSE-B" as per the Linux Kernel style document. Note that parenthesis are allowed so when they were used before we continue to use them. Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> 2018-05-06 22:27:01 +00:00			`// SPDX-License-Identifier: GPL-2.0+ OR X11`
armv8: ls1088ardb: Add support for LS1088ARDB platform LS1088A is an ARMv8 implementation. The LS1088ARDB is an evaluatoin platform that supports the LS1088A family SoCs. This patch add basic support of the platform. Signed-off-by: Alison Wang <alison.wang@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Raghav Dogra <raghav.dogra@nxp.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> [YS: Disabled NAND in board header file] Reviewed-by: York Sun <york.sun@nxp.com> WIP: disable NAND for LS1088ARDB 2017-08-31 10:42:54 +00:00			`/*`
			`* NXP ls1088a RDB board device tree source`
			`*`
			`* Copyright 2017 NXP`
			`*/`

			`/dts-v1/;`

			`#include "fsl-ls1088a.dtsi"`

			`/ {`
			`model = "NXP Layerscape 1088a RDB Board";`
			`compatible = "fsl,ls1088a-rdb", "fsl,ls1088a";`
			`aliases {`
			`spi0 = &qspi;`
			`};`
			`};`

			`&qspi {`
			`bus-num = <0>;`
			`status = "okay";`

			`qflash0: s25fs512s@0 {`
			`#address-cells = <1>;`
			`#size-cells = <1>;`
			`compatible = "spi-flash";`
			`spi-max-frequency = <50000000>;`
			`reg = <0>;`
			`};`

			`qflash1: s25fs512s@1 {`
			`#address-cells = <1>;`
			`#size-cells = <1>;`
			`compatible = "spi-flash";`
			`spi-max-frequency = <50000000>;`
			`reg = <1>;`
			`};`
			`};`