u-boot/include/configs/dra7xx_evm.h

/*
 * (C) Copyright 2013
 * Texas Instruments Incorporated.
 * Lokesh Vutla	  <lokeshvutla@ti.com>
 *
 * Configuration settings for the TI DRA7XX board.
 * See omap5_common.h for omap5 common settings.
 *
 * SPDX-License-Identifier:	GPL-2.0+ 
 */

#ifndef __CONFIG_DRA7XX_EVM_H
#define __CONFIG_DRA7XX_EVM_H

/* High Level Configuration Options */
#define CONFIG_DRA7XX		/* in a TI DRA7XX core */
#define CONFIG_ENV_IS_NOWHERE		/* For now. */

#include <configs/omap5_common.h>

#define CONFIG_SYS_PROMPT		"DRA752 EVM # "

#define CONFIG_CONS_INDEX		1
#define CONFIG_SYS_NS16550_COM1		UART1_BASE
#define CONFIG_BAUDRATE			115200

#define CONFIG_SYS_OMAP_ABE_SYSCK

#define CONSOLEDEV		"ttyO0"

#endif /* __CONFIG_DRA7XX_EVM_H */
arm: dra7xx: Add dra7xx_evm build support Adding the build support for dra7xx_evm. Reusing omap5_evm.h config by moving it to omap5_common.h Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: R Sricharan <r.sricharan@ti.com> 2013-02-17 23:34:35 +00:00			`/*`
			`* (C) Copyright 2013`
			`* Texas Instruments Incorporated.`
			`* Lokesh Vutla <lokeshvutla@ti.com>`
			`*`
			`* Configuration settings for the TI DRA7XX board.`
			`* See omap5_common.h for omap5 common settings.`
			`*`
Add GPL-2.0+ SPDX-License-Identifier to source files Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com> 2013-07-08 07:37:19 +00:00			`* SPDX-License-Identifier: GPL-2.0+`
arm: dra7xx: Add dra7xx_evm build support Adding the build support for dra7xx_evm. Reusing omap5_evm.h config by moving it to omap5_common.h Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: R Sricharan <r.sricharan@ti.com> 2013-02-17 23:34:35 +00:00			`*/`

			`#ifndef __CONFIG_DRA7XX_EVM_H`
			`#define __CONFIG_DRA7XX_EVM_H`

ARM: DRA7xx: Add control id code for DRA7xx The registers that are used for device identification are changed from OMAP5 to DRA7xx. Using the correct registers for DRA7xx. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> 2013-05-30 03:19:28 +00:00			`/* High Level Configuration Options */`
			`#define CONFIG_DRA7XX /* in a TI DRA7XX core */`
omap5_uevm.h: Move uEVM-specific choices to omap5_uevm.h The omap5_uevm platform has eMMC, and it makes sense to say that our default env storage shall reside there. Other platforms may not, so move this choice to the EVM config. In addition, we should provide some way to partition the flash for later usage, so take advantage of the GPT partition table support code and allow that to be setup with some reasonable defaults. Cc: Sricharan R <r.sricharan@ti.com> Signed-off-by: Tom Rini <trini@ti.com> 2013-04-05 06:21:45 +00:00			`#define CONFIG_ENV_IS_NOWHERE /* For now. */`

arm: dra7xx: Add dra7xx_evm build support Adding the build support for dra7xx_evm. Reusing omap5_evm.h config by moving it to omap5_common.h Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: R Sricharan <r.sricharan@ti.com> 2013-02-17 23:34:35 +00:00			`#include <configs/omap5_common.h>`

			`#define CONFIG_SYS_PROMPT "DRA752 EVM # "`

ARM: DRA7xx: Change the Debug UART to UART1 Serial UART is connected to UART1. So add the change for the same. Signed-off-by: Sricharan R <r.sricharan@ti.com> 2013-05-30 03:19:33 +00:00			`#define CONFIG_CONS_INDEX 1`
			`#define CONFIG_SYS_NS16550_COM1 UART1_BASE`
			`#define CONFIG_BAUDRATE 115200`
ARM: DRA7xx: clocks: Update PLL values Update PLL values. SYS_CLKSEL value for 20MHz is changed to 2. In other platforms SYS_CLKSEL value 2 represents reserved. But in sys_clk array ind 1 is used for 13Mhz. Since other platforms are not using 13Mhz, reusing index 1 for 20MHz. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Sricharan R <r.sricharan@ti.com> 2013-05-30 03:19:38 +00:00
			`#define CONFIG_SYS_OMAP_ABE_SYSCK`
arm: dra7xx: Update the EXTRA_ENV_SETTINGS Update the EXTRA_ENV_SETTING for the dra7xx. The console needs to be set to ttyO0 and the findfdt needs to be updated to load the dra7xx-evm.dtb file. Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Tom Rini <trini@ti.com> 2013-06-11 16:22:30 +00:00
			`#define CONSOLEDEV "ttyO0"`

arm: dra7xx: Add dra7xx_evm build support Adding the build support for dra7xx_evm. Reusing omap5_evm.h config by moving it to omap5_common.h Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: R Sricharan <r.sricharan@ti.com> 2013-02-17 23:34:35 +00:00			`#endif /* __CONFIG_DRA7XX_EVM_H */`