mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-29 22:43:10 +00:00
67 lines
1.9 KiB
Text
67 lines
1.9 KiB
Text
|
U-Boot for the Toradex Colibri iMX8QXP V1.0B Module
|
||
|
|
|
||
|
|
Quick Start
|
||
|
|
===========
|
||
|
|
|
||
|
|
- Build the ARM trusted firmware binary
|
||
|
|
- Get scfw_tcm.bin and ahab-container.img
|
||
|
|
- Build U-Boot
|
||
|
|
- Load U-Boot binary using uuu
|
||
|
|
- Flash U-Boot binary into the eMMC
|
||
|
|
- Boot
|
||
|
|
|
||
|
|
Get and Build the ARM Trusted Firmware
|
||
|
|
======================================
|
||
|
|
|
||
|
|
$ git clone -b imx_4.14.78_1.0.0_ga https://source.codeaurora.org/external/imx/imx-atf
|
||
|
|
$ cd imx-atf/
|
||
|
|
$ make PLAT=imx8qxp bl31
|
||
|
|
|
||
|
|
Get scfw_tcm.bin and ahab-container.img
|
||
|
|
=======================================
|
||
|
|
|
||
|
|
$ wget https://github.com/toradex/meta-fsl-bsp-release/blob/toradex-sumo-4.14.78-1.0.0_ga-bringup/imx/meta-bsp/recipes-bsp/imx-sc-firmware/files/mx8qx-colibri-scfw-tcm.bin?raw=true
|
||
|
|
$ mv mx8qx-colibri-scfw-tcm.bin\?raw\=true mx8qx-colibri-scfw-tcm.bin
|
||
|
|
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin
|
||
|
|
$ chmod +x firmware-imx-8.0.bin
|
||
|
|
$ ./firmware-imx-8.0.bin
|
||
|
|
|
||
|
|
Copy the following binaries to the U-Boot folder:
|
||
|
|
|
||
|
|
$ cp imx-atf/build/imx8qxp/release/bl31.bin .
|
||
|
|
$ cp u-boot/u-boot.bin .
|
||
|
|
|
||
|
|
Copy the following firmware to the U-Boot folder:
|
||
|
|
|
||
|
|
$ cp firmware-imx-8.0/firmware/seco/ahab-container.img .
|
||
|
|
|
||
|
|
Build U-Boot
|
||
|
|
============
|
||
|
|
|
||
|
|
$ make colibri-imx8qxp_defconfig
|
||
|
|
$ make u-boot-dtb.imx
|
||
|
|
|
||
|
|
Load the U-Boot Binary Using UUU
|
||
|
|
================================
|
||
|
|
|
||
|
|
Get the latest version of the universal update utility (uuu) aka mfgtools 3.0:
|
||
|
|
|
||
|
|
https://community.nxp.com/external-link.jspa?url=https%3A%2F%2Fgithub.com%2FNXPmicro%2Fmfgtools%2Freleases
|
||
|
|
|
||
|
|
Put the module into USB recovery aka serial downloader mode, connect USB device
|
||
|
|
to your host and execute uuu:
|
||
|
|
|
||
|
|
sudo ./uuu u-boot/u-boot-dtb.imx
|
||
|
|
|
||
|
|
Flash the U-Boot Binary into the eMMC
|
||
|
|
=====================================
|
||
|
|
|
||
|
|
Burn the u-boot-dtb.imx binary to the primary eMMC hardware boot area partition:
|
||
|
|
|
||
|
|
load mmc 1:1 $loadaddr u-boot-dtb.imx
|
||
|
|
setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200
|
||
|
|
mmc dev 0 1
|
||
|
|
mmc write ${loadaddr} 0x0 ${blkcnt}
|
||
|
|
|
||
|
|
Boot
|