Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-11 05:42:58 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/configs/r8a779f0_spider_defconfig

85 lines
2 KiB
Text
Raw Normal View History

ARM: renesas: Add R8A779F0 S4 Spider board code Add board code for R8A779F0 S4 Spider board. Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [Marek: Synchronize configuration symbols which are now switched to Kconfig Mallocate gd->bd->bi_boot_params, i.e. drop the assignment Sort headers, use clrbits_le32(), use BIT macros where appropriate Use CONFIG_SYS_CLK_FREQ for counter frequency instead of custom macro]
2023-02-28 21:34:46 +00:00
CONFIG_ARM=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_RMOBILE=y
CONFIG_SYS_MALLOC_LEN=0x4000000
CONFIG_ENV_SIZE=0x40000
CONFIG_ENV_OFFSET=0xD00000
CONFIG_ENV_SECT_SIZE=0x40000
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="r8a779f0-spider-u-boot"
CONFIG_RCAR_GEN4=y
CONFIG_TARGET_SPIDER=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-05-29 14:43:26 +00:00
CONFIG_SYS_MONITOR_LEN=1048576
ARM: renesas: Add R8A779F0 S4 Spider board code Add board code for R8A779F0 S4 Spider board. Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [Marek: Synchronize configuration symbols which are now switched to Kconfig Mallocate gd->bd->bi_boot_params, i.e. drop the assignment Sort headers, use clrbits_le32(), use BIT macros where appropriate Use CONFIG_SYS_CLK_FREQ for counter frequency instead of custom macro]
2023-02-28 21:34:46 +00:00
CONFIG_SYS_CLK_FREQ=20000000
# CONFIG_PSCI_RESET is not set
CONFIG_SYS_LOAD_ADDR=0x58000000
CONFIG_SYS_BOOT_GET_CMDLINE=y
CONFIG_SYS_BARGSIZE=2048
CONFIG_REMAKE_ELF=y
CONFIG_FIT=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="root=/dev/nfs rw nfsroot=192.168.0.1:/export/rfs ip=192.168.0.20"
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="tftp 0x48080000 Image && tftp 0x48000000 Image-r8a779f0-spider.dtb && booti 0x48080000 - 0x48000000"
CONFIG_DEFAULT_FDT_FILE="r8a779f0-spider.dtb"
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2024-01-03 14:26:16 +00:00
CONFIG_SYS_CBSIZE=2048
ARM: renesas: Add R8A779F0 S4 Spider board code Add board code for R8A779F0 S4 Spider board. Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [Marek: Synchronize configuration symbols which are now switched to Kconfig Mallocate gd->bd->bi_boot_params, i.e. drop the assignment Sort headers, use clrbits_le32(), use BIT macros where appropriate Use CONFIG_SYS_CLK_FREQ for counter frequency instead of custom macro]
2023-02-28 21:34:46 +00:00
CONFIG_SYS_MALLOC_BOOTPARAMS=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_MAXARGS=64
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
ARM: renesas: Enable UFS on R8A779F0 S4 Spider Enable UFS controller driver and matching UFS and SCSI commands. The former is used to initialize the device, the later is used to perform low level access to the SCSI interface of the UFS device. Enable R8A779F0 S4 Spider specific dependencies, the PCA953x driver and GPIO clock gate driver. This setup is used to toggle 38.4 MHz clock for the UFS controller. Enable support for 48bit LBA in block layer to address disks larger than 512*2^32 ~= 144 PiB. Enable use of 64bit LBA variables in the rest of U-Boot, instead of the default 32bit ones. Increase FAT cluster size to 128k as that is what is used by the filesystem that is populated on the UFS device. Use 'ufs init && scsi scan' to start the UFS device from U-Boot prompt. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-08-22 01:47:56 +00:00
CONFIG_CMD_PART=y
ARM: renesas: Add R8A779F0 S4 Spider board code Add board code for R8A779F0 S4 Spider board. Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [Marek: Synchronize configuration symbols which are now switched to Kconfig Mallocate gd->bd->bi_boot_params, i.e. drop the assignment Sort headers, use clrbits_le32(), use BIT macros where appropriate Use CONFIG_SYS_CLK_FREQ for counter frequency instead of custom macro]
2023-02-28 21:34:46 +00:00
CONFIG_CMD_SPI=y
ARM: renesas: Enable UFS on R8A779F0 S4 Spider Enable UFS controller driver and matching UFS and SCSI commands. The former is used to initialize the device, the later is used to perform low level access to the SCSI interface of the UFS device. Enable R8A779F0 S4 Spider specific dependencies, the PCA953x driver and GPIO clock gate driver. This setup is used to toggle 38.4 MHz clock for the UFS controller. Enable support for 48bit LBA in block layer to address disks larger than 512*2^32 ~= 144 PiB. Enable use of 64bit LBA variables in the rest of U-Boot, instead of the default 32bit ones. Increase FAT cluster size to 128k as that is what is used by the filesystem that is populated on the UFS device. Use 'ufs init && scsi scan' to start the UFS device from U-Boot prompt. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-08-22 01:47:56 +00:00
CONFIG_CMD_UFS=y
ARM: renesas: Add R8A779F0 S4 Spider board code Add board code for R8A779F0 S4 Spider board. Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [Marek: Synchronize configuration symbols which are now switched to Kconfig Mallocate gd->bd->bi_boot_params, i.e. drop the assignment Sort headers, use clrbits_le32(), use BIT macros where appropriate Use CONFIG_SYS_CLK_FREQ for counter frequency instead of custom macro]
2023-02-28 21:34:46 +00:00
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_OF_CONTROL=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_VERSION_VARIABLE=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
ARM: renesas: Enable UFS on R8A779F0 S4 Spider Enable UFS controller driver and matching UFS and SCSI commands. The former is used to initialize the device, the later is used to perform low level access to the SCSI interface of the UFS device. Enable R8A779F0 S4 Spider specific dependencies, the PCA953x driver and GPIO clock gate driver. This setup is used to toggle 38.4 MHz clock for the UFS controller. Enable support for 48bit LBA in block layer to address disks larger than 512*2^32 ~= 144 PiB. Enable use of 64bit LBA variables in the rest of U-Boot, instead of the default 32bit ones. Increase FAT cluster size to 128k as that is what is used by the filesystem that is populated on the UFS device. Use 'ufs init && scsi scan' to start the UFS device from U-Boot prompt. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-08-22 01:47:56 +00:00
CONFIG_LBA48=y
CONFIG_SYS_64BIT_LBA=y
ARM: renesas: Add R8A779F0 S4 Spider board code Add board code for R8A779F0 S4 Spider board. Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [Marek: Synchronize configuration symbols which are now switched to Kconfig Mallocate gd->bd->bi_boot_params, i.e. drop the assignment Sort headers, use clrbits_le32(), use BIT macros where appropriate Use CONFIG_SYS_CLK_FREQ for counter frequency instead of custom macro]
2023-02-28 21:34:46 +00:00
CONFIG_CLK=y
ARM: renesas: Enable UFS on R8A779F0 S4 Spider Enable UFS controller driver and matching UFS and SCSI commands. The former is used to initialize the device, the later is used to perform low level access to the SCSI interface of the UFS device. Enable R8A779F0 S4 Spider specific dependencies, the PCA953x driver and GPIO clock gate driver. This setup is used to toggle 38.4 MHz clock for the UFS controller. Enable support for 48bit LBA in block layer to address disks larger than 512*2^32 ~= 144 PiB. Enable use of 64bit LBA variables in the rest of U-Boot, instead of the default 32bit ones. Increase FAT cluster size to 128k as that is what is used by the filesystem that is populated on the UFS device. Use 'ufs init && scsi scan' to start the UFS device from U-Boot prompt. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-08-22 01:47:56 +00:00
CONFIG_CLK_GPIO=y
ARM: renesas: Add R8A779F0 S4 Spider board code Add board code for R8A779F0 S4 Spider board. Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [Marek: Synchronize configuration symbols which are now switched to Kconfig Mallocate gd->bd->bi_boot_params, i.e. drop the assignment Sort headers, use clrbits_le32(), use BIT macros where appropriate Use CONFIG_SYS_CLK_FREQ for counter frequency instead of custom macro]
2023-02-28 21:34:46 +00:00
CONFIG_CLK_RENESAS=y
CONFIG_RCAR_GPIO=y
ARM: renesas: Enable UFS on R8A779F0 S4 Spider Enable UFS controller driver and matching UFS and SCSI commands. The former is used to initialize the device, the later is used to perform low level access to the SCSI interface of the UFS device. Enable R8A779F0 S4 Spider specific dependencies, the PCA953x driver and GPIO clock gate driver. This setup is used to toggle 38.4 MHz clock for the UFS controller. Enable support for 48bit LBA in block layer to address disks larger than 512*2^32 ~= 144 PiB. Enable use of 64bit LBA variables in the rest of U-Boot, instead of the default 32bit ones. Increase FAT cluster size to 128k as that is what is used by the filesystem that is populated on the UFS device. Use 'ufs init && scsi scan' to start the UFS device from U-Boot prompt. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-08-22 01:47:56 +00:00
CONFIG_DM_PCA953X=y
ARM: renesas: Add R8A779F0 S4 Spider board code Add board code for R8A779F0 S4 Spider board. Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [Marek: Synchronize configuration symbols which are now switched to Kconfig Mallocate gd->bd->bi_boot_params, i.e. drop the assignment Sort headers, use clrbits_le32(), use BIT macros where appropriate Use CONFIG_SYS_CLK_FREQ for counter frequency instead of custom macro]
2023-02-28 21:34:46 +00:00
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_RCAR_I2C=y
CONFIG_MMC_IO_VOLTAGE=y
CONFIG_MMC_UHS_SUPPORT=y
CONFIG_MMC_HS200_SUPPORT=y
CONFIG_RENESAS_SDHI=y
CONFIG_MTD=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_SPANSION=y
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
ARM: renesas: Enable rswitch, serdes and PHY driver on R8A779F0 S4 Spider Enable Renesas RSwitch driver, matching SERDES PHY driver and Marvell 10G ethernet PHY driver in R8A779F0 S4 Spider board configuration to make ethernet available via the RSwitch ports. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-03-20 20:05:47 +00:00
CONFIG_PHYLIB_10G=y
CONFIG_PHY_MARVELL_10G=y
CONFIG_DM_ETH_PHY=y
CONFIG_RENESAS_ETHER_SWITCH=y
CONFIG_PHY_R8A779F0_ETHERNET_SERDES=y
ARM: renesas: Add R8A779F0 S4 Spider board code Add board code for R8A779F0 S4 Spider board. Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [Marek: Synchronize configuration symbols which are now switched to Kconfig Mallocate gd->bd->bi_boot_params, i.e. drop the assignment Sort headers, use clrbits_le32(), use BIT macros where appropriate Use CONFIG_SYS_CLK_FREQ for counter frequency instead of custom macro]
2023-02-28 21:34:46 +00:00
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
ARM: renesas: Enable UFS on R8A779F0 S4 Spider Enable UFS controller driver and matching UFS and SCSI commands. The former is used to initialize the device, the later is used to perform low level access to the SCSI interface of the UFS device. Enable R8A779F0 S4 Spider specific dependencies, the PCA953x driver and GPIO clock gate driver. This setup is used to toggle 38.4 MHz clock for the UFS controller. Enable support for 48bit LBA in block layer to address disks larger than 512*2^32 ~= 144 PiB. Enable use of 64bit LBA variables in the rest of U-Boot, instead of the default 32bit ones. Increase FAT cluster size to 128k as that is what is used by the filesystem that is populated on the UFS device. Use 'ufs init && scsi scan' to start the UFS device from U-Boot prompt. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-08-22 01:47:56 +00:00
CONFIG_SCSI=y
ARM: renesas: Add R8A779F0 S4 Spider board code Add board code for R8A779F0 S4 Spider board. Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [Marek: Synchronize configuration symbols which are now switched to Kconfig Mallocate gd->bd->bi_boot_params, i.e. drop the assignment Sort headers, use clrbits_le32(), use BIT macros where appropriate Use CONFIG_SYS_CLK_FREQ for counter frequency instead of custom macro]
2023-02-28 21:34:46 +00:00
CONFIG_BAUDRATE=1843200
CONFIG_SCIF_CONSOLE=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_RENESAS_RPC_SPI=y
ARM: renesas: Enable UFS on R8A779F0 S4 Spider Enable UFS controller driver and matching UFS and SCSI commands. The former is used to initialize the device, the later is used to perform low level access to the SCSI interface of the UFS device. Enable R8A779F0 S4 Spider specific dependencies, the PCA953x driver and GPIO clock gate driver. This setup is used to toggle 38.4 MHz clock for the UFS controller. Enable support for 48bit LBA in block layer to address disks larger than 512*2^32 ~= 144 PiB. Enable use of 64bit LBA variables in the rest of U-Boot, instead of the default 32bit ones. Increase FAT cluster size to 128k as that is what is used by the filesystem that is populated on the UFS device. Use 'ufs init && scsi scan' to start the UFS device from U-Boot prompt. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-08-22 01:47:56 +00:00
CONFIG_UFS=y
CONFIG_UFS_RENESAS=y
CONFIG_FS_FAT_MAX_CLUSTSIZE=131072
Reference in a new issue Copy permalink