u-boot/configs/orangepi_plus_defconfig

CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-plus"
CONFIG_SPL=y
CONFIG_MACH_SUN8I_H3=y
CONFIG_DRAM_CLK=672
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
CONFIG_USB1_VBUS_PIN="PG13"
CONFIG_USB3_VBUS_PIN="PG11"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C=y
CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SUN8I_EMAC=y
CONFIG_SY8106A_POWER=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
sunxi: Add support for Orangepi Plus and Orangepi PC boards Add defconfig files for the Orangepi Plus and Orangepi PC. Signed-off-by: Hans de Goede <hdegoede@redhat.com> 2015-11-20 15:19:51 +00:00			`CONFIG_ARM=y`
			`CONFIG_ARCH_SUNXI=y`
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com> 2021-06-28 14:17:29 +00:00			`CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-plus"`
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com> 2018-04-08 00:27:54 +00:00			`CONFIG_SPL=y`
sunxi: Add support for Orangepi Plus and Orangepi PC boards Add defconfig files for the Orangepi Plus and Orangepi PC. Signed-off-by: Hans de Goede <hdegoede@redhat.com> 2015-11-20 15:19:51 +00:00			`CONFIG_MACH_SUN8I_H3=y`
			`CONFIG_DRAM_CLK=672`
sunxi: Enable support for the eMMC found on the orangepi plus This enables support for the eMMC found on the orangepi plus. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> 2016-03-20 13:19:50 +00:00			`CONFIG_MMC_SUNXI_SLOT_EXTRA=2`
configs: Re-sync HUSH options Move all cases of CONFIG_SYS_HUSH_PARSER out of the config.h files. Remove all cases of CONFIG_SYS_PROMPT_HUSH_PS2 as everyone uses the default. Signed-off-by: Tom Rini <trini@konsulko.com> 2016-04-22 01:37:19 +00:00			`CONFIG_USB1_VBUS_PIN="PG13"`
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com> 2023-10-23 19:08:23 +00:00			`CONFIG_USB3_VBUS_PIN="PG11"`
sunxi: Add support for Orangepi Plus and Orangepi PC boards Add defconfig files for the Orangepi Plus and Orangepi PC. Signed-off-by: Hans de Goede <hdegoede@redhat.com> 2015-11-20 15:19:51 +00:00			`# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set`
i2c: Rename SPL/TPL_I2C_SUPPORT to I2C Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de> 2021-07-11 03:14:36 +00:00			`CONFIG_SPL_I2C=y`
Convert CONFIG_SYS_I2C_LEGACY to Kconfig and add CONFIG_[ST]PL_SYS_I2C_LEGACY First, we convert CONFIG_SYS_I2C_LEGACY to Kconfig. Next, as you cannot have SYS_I2C_LEGACY and DM_I2C at the same time, introduce CONFIG_SPL_SYS_I2C_LEGACY so that we can enable the legacy option only in SPL. Finally, for some PowerPC cases we also need CONFIG_TPL_SYS_I2C_LEGACY support. Convert all of the existing users to one or more symbols. Signed-off-by: Tom Rini <trini@konsulko.com> 2021-08-19 03:12:24 +00:00			`CONFIG_SPL_SYS_I2C_LEGACY=y`
Convert CONFIG_SYS_I2C_MVTWSI to Kconfig This converts the following to Kconfig: CONFIG_SYS_I2C_MVTWSI Signed-off-by: Tom Rini <trini@konsulko.com> 2021-08-17 21:59:47 +00:00			`CONFIG_SYS_I2C_MVTWSI=y`
configs: Resync with savedefconfig Signed-off-by: Tom Rini <trini@konsulko.com> 2016-09-08 20:11:59 +00:00			`CONFIG_SUN8I_EMAC=y`
sunxi: power: add support for sy8106a driver SY8106A is a PMIC which is used on the Allwinner H3 Orange Pi Pc and Plus board. The VOUT1_SEL register is implemented to set the default V-CPU voltage to 1200 mV. This driver is required to ensure the SY8106A V-CPU voltage is set to 1200 mV after a software reset. On cold boot the default SY8106A output voltage is selected to be 1200 mV by a pair of resistors on the Orange Pi PC and Plus. Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> Tested-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Acked-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> 2016-02-23 17:47:19 +00:00			`CONFIG_SY8106A_POWER=y`
sunxi: H3: Add support for the host usb-phys Add support for phy 1-3. Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> [hdegoede@redhat.com: use setclrbits_le32 instead of read-modify-write] Signed-off-by: Hans de Goede <hdegoede@redhat.com> 2016-02-09 22:59:33 +00:00			`CONFIG_USB_EHCI_HCD=y`
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com> 2019-02-07 19:53:03 +00:00			`CONFIG_USB_OHCI_HCD=y`