u-boot/include/configs/bg0900.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Copyright (C) 2013 Marek Vasut <marex@denx.de>
 */
#ifndef __CONFIGS_BG0900_H__
#define __CONFIGS_BG0900_H__

/* Memory configuration */
#define PHYS_SDRAM_1			0x40000000	/* Base address */
#define PHYS_SDRAM_1_SIZE		0x10000000	/* Max 256 MB RAM */
#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1

/* Environment */

/* FEC Ethernet on SoC */
#ifdef	CONFIG_CMD_NET
#define CONFIG_FEC_MXC
#endif

/* Boot Linux */
#define CONFIG_BOOTFILE		"uImage"
#define CONFIG_BOOTCOMMAND	"bootm"
#define CONFIG_LOADADDR		0x42000000
#define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR

/* Extra Environment */
#define CONFIG_EXTRA_ENV_SETTINGS					\
	"update_spi_firmware_filename=u-boot.sb\0"			\
	"update_spi_firmware_maxsz=0x80000\0"				\
	"update_spi_firmware="	/* Update the SPI flash firmware */	\
		"if sf probe 2:0 ; then "				\
		"if tftp ${update_spi_firmware_filename} ; then "	\
		"sf erase 0x0 +${filesize} ; "				\
		"sf write ${loadaddr} 0x0 ${filesize} ; "		\
		"fi ; "							\
		"fi\0"

/* The rest of the configuration is shared */
#include <configs/mxs.h>

#endif /* __CONFIGS_BG0900_H__ */
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> 2018-05-06 21:58:06 +00:00			`/* SPDX-License-Identifier: GPL-2.0+ */`
ARM: mxs: Add PPC-AG BG0900 board This board supports FEC Ethernet, SPI NOR and NAND flash. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Christoph Baumann <c.baumann@ppc-ag.de> 2013-09-20 14:14:13 +00:00			`/*`
			`* Copyright (C) 2013 Marek Vasut <marex@denx.de>`
			`*/`
			`#ifndef __CONFIGS_BG0900_H__`
			`#define __CONFIGS_BG0900_H__`

			`/* Memory configuration */`
			`#define PHYS_SDRAM_1 0x40000000 /* Base address */`
			`#define PHYS_SDRAM_1_SIZE 0x10000000 /* Max 256 MB RAM */`
			`#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1`

			`/* Environment */`

			`/* FEC Ethernet on SoC */`
			`#ifdef CONFIG_CMD_NET`
			`#define CONFIG_FEC_MXC`
			`#endif`

			`/* Boot Linux */`
			`#define CONFIG_BOOTFILE "uImage"`
			`#define CONFIG_BOOTCOMMAND "bootm"`
			`#define CONFIG_LOADADDR 0x42000000`
			`#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR`

			`/* Extra Environment */`
			`#define CONFIG_EXTRA_ENV_SETTINGS \`
			`"update_spi_firmware_filename=u-boot.sb\0" \`
			`"update_spi_firmware_maxsz=0x80000\0" \`
			`"update_spi_firmware=" /* Update the SPI flash firmware */ \`
			`"if sf probe 2:0 ; then " \`
			`"if tftp ${update_spi_firmware_filename} ; then " \`
			`"sf erase 0x0 +${filesize} ; " \`
			`"sf write ${loadaddr} 0x0 ${filesize} ; " \`
			`"fi ; " \`
			`"fi\0"`

			`/* The rest of the configuration is shared */`
			`#include <configs/mxs.h>`

			`#endif /* __CONFIGS_BG0900_H__ */`