mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-05 20:54:31 +00:00
77 lines
2.5 KiB
ReStructuredText
77 lines
2.5 KiB
ReStructuredText
|
Building with Clang
|
||
|
|
===================
|
||
|
|
|
||
|
|
The biggest problem when trying to compile U-Boot with Clang is that almost all
|
||
|
|
archs rely on storing gd in a global register and the Clang 3.5 user manual
|
||
|
|
states: "Clang does not support global register variables; this is unlikely to
|
||
|
|
be implemented soon because it requires additional LLVM backend support."
|
||
|
|
|
||
|
|
The ARM backend can be instructed not to use the r9 and x18 registers using
|
||
|
|
-ffixed-r9 or -ffixed-x18 respectively. As global registers themselves are not
|
||
|
|
supported inline assembly is needed to get and set the r9 or x18 value. This
|
||
|
|
leads to larger code then strictly necessary, but at least works.
|
||
|
|
|
||
|
|
**NOTE:** target compilation only work for _some_ ARM boards at the moment.
|
||
|
|
Also AArch64 is not supported currently due to a lack of private libgcc
|
||
|
|
support. Boards which reassign gd in c will also fail to compile, but there is
|
||
|
|
in no strict reason to do so in the ARM world, since crt0.S takes care of this.
|
||
|
|
These assignments can be avoided by changing the init calls but this is not in
|
||
|
|
mainline yet.
|
||
|
|
|
||
|
|
|
||
|
|
Debian based
|
||
|
|
------------
|
||
|
|
|
||
|
|
Required packages can be installed via apt, e.g.
|
||
|
|
|
||
|
|
.. code-block:: bash
|
||
|
|
|
||
|
|
sudo apt-get install clang
|
||
|
|
|
||
|
|
Note that we still use binutils for some tools so we must continue to set
|
||
|
|
CROSS_COMPILE. To compile U-Boot with Clang on Linux without IAS use e.g.
|
||
|
|
|
||
|
|
.. code-block:: bash
|
||
|
|
|
||
|
|
make HOSTCC=clang rpi_2_defconfig
|
||
|
|
make HOSTCC=clang CROSS_COMPILE=arm-linux-gnueabi- \
|
||
|
|
CC="clang -target arm-linux-gnueabi" -j8
|
||
|
|
|
||
|
|
It can also be used to compile sandbox:
|
||
|
|
|
||
|
|
.. code-block:: bash
|
||
|
|
|
||
|
|
make HOSTCC=clang sandbox_defconfig
|
||
|
|
make HOSTCC=clang CC=clang -j8
|
||
|
|
|
||
|
|
|
||
|
|
FreeBSD 11
|
||
|
|
----------
|
||
|
|
|
||
|
|
Since llvm 3.4 is currently in the base system, the integrated assembler as
|
||
|
|
is incapable of building U-Boot. Therefore gas from devel/arm-gnueabi-binutils
|
||
|
|
is used instead. It needs a symlink to be picked up correctly though:
|
||
|
|
|
||
|
|
.. code-block:: bash
|
||
|
|
|
||
|
|
ln -s /usr/local/bin/arm-gnueabi-freebsd-as /usr/bin/arm-freebsd-eabi-as
|
||
|
|
|
||
|
|
The following commands compile U-Boot using the Clang xdev toolchain.
|
||
|
|
|
||
|
|
**NOTE:** CROSS_COMPILE and target differ on purpose!
|
||
|
|
|
||
|
|
.. code-block:: bash
|
||
|
|
|
||
|
|
export CROSS_COMPILE=arm-gnueabi-freebsd-
|
||
|
|
gmake rpi_2_defconfig
|
||
|
|
gmake CC="clang -target arm-freebsd-eabi --sysroot /usr/arm-freebsd" -j8
|
||
|
|
|
||
|
|
Given that U-Boot will default to gcc, above commands can be
|
||
|
|
simplified with a simple wrapper script - saved as
|
||
|
|
/usr/local/bin/arm-gnueabi-freebsd-gcc - listed below:
|
||
|
|
|
||
|
|
.. code-block:: bash
|
||
|
|
|
||
|
|
#!/bin/sh
|
||
|
|
exec clang -target arm-freebsd-eabi --sysroot /usr/arm-freebsd "$@"
|