Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-12 14:23:00 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/configs/uniphier_v8_defconfig

65 lines
1.6 KiB
Text
Raw Normal View History

ARM: uniphier: add uniphier_v8_defconfig This defconfig does not support SPL. If you use this, the basic SoC initialization must be done in firmware that runs before U-Boot. (Generally, ARM Trusted Firmware is expected to do this job). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-21 09:05:23 +00:00
CONFIG_ARM=y
ARM: uniphier_v8_defconfig: make 64bit SoC image position independent For a planned new SoC in this SoC family, the base address of the DRAM will be changed from 0x80000000 to 0x20000000. The PIE support will be useful to maintain multiple similar SoCs whose DRAM addresses differ. Now CONFIG_SYS_TEXT_BASE is not important. I just set it to 0 to ensure CONFIG_POSITION_INDEPENDENT is working. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-26 04:51:47 +00:00
CONFIG_POSITION_INDEPENDENT=y
ARM: uniphier: enable PSCI sysreset for uniphier_v8_defconfig This configuration is supposed to be used with ARM Trusted Firmware, so the SYSTEM_RESET is implemented in BL31. Invoke PSCI instead of U-Boot's own reset code because we need to coordinate with SCP (System Control Processor) for the system-level power management. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-04-20 07:54:42 +00:00
CONFIG_ARM_SMCCC=y
ARM: uniphier: add uniphier_v8_defconfig This defconfig does not support SPL. If you use this, the basic SoC initialization must be done in firmware that runs before U-Boot. (Generally, ARM Trusted Firmware is expected to do this job). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-21 09:05:23 +00:00
CONFIG_ARCH_UNIPHIER=y
ARM: uniphier_v8_defconfig: make 64bit SoC image position independent For a planned new SoC in this SoC family, the base address of the DRAM will be changed from 0x80000000 to 0x20000000. The PIE support will be useful to maintain multiple similar SoCs whose DRAM addresses differ. Now CONFIG_SYS_TEXT_BASE is not important. I just set it to 0 to ensure CONFIG_POSITION_INDEPENDENT is working. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-26 04:51:47 +00:00
CONFIG_SYS_TEXT_BASE=0x00000000
ARM: uniphier: add uniphier_v8_defconfig This defconfig does not support SPL. If you use this, the basic SoC initialization must be done in firmware that runs before U-Boot. (Generally, ARM Trusted Firmware is expected to do this job). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-21 09:05:23 +00:00
CONFIG_SYS_MALLOC_F_LEN=0x2000
env: Finish migration of common ENV options - In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-19 01:02:10 +00:00
CONFIG_ENV_SIZE=0x2000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-29 19:54:04 +00:00
CONFIG_NR_DRAM_BANKS=3
ARM: uniphier: add uniphier_v8_defconfig This defconfig does not support SPL. If you use this, the basic SoC initialization must be done in firmware that runs before U-Boot. (Generally, ARM Trusted Firmware is expected to do this job). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-21 09:05:23 +00:00
CONFIG_ARCH_UNIPHIER_V8_MULTI=y
CONFIG_MICRO_SUPPORT_CARD=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-28 12:46:52 +00:00
CONFIG_DEFAULT_DEVICE_TREE="uniphier-ld20-ref"
ARM: uniphier: add uniphier_v8_defconfig This defconfig does not support SPL. If you use this, the basic SoC initialization must be done in firmware that runs before U-Boot. (Generally, ARM Trusted Firmware is expected to do this job). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-21 09:05:23 +00:00
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
ARM: uniphier: allow to source boot script before distro-boot Some users might need additional setups before booting the kernel. If there is found a file 'boot.scr', run it before invoking the distro boot command. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-19 11:03:14 +00:00
CONFIG_BOOTCOMMAND="run ${bootdev}script; run ${bootdev}boot"
preboot: Introduce CONFIG_USE_PREBOOT and migrate CONFIG_PREBOOT This is the same migration path as commit b6251db8c3f0 ("Kconfig: Introduce USE_BOOTCOMMAND and migrate BOOTCOMMAND"). I also moved the description in README to the Kconfig help. I ripped off the sentence about 'LWMON' since it is gone already. I only let my boards migrate, leaving the rest to platform maintainers. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-02-14 02:05:33 +00:00
CONFIG_USE_PREBOOT=y
CONFIG_PREBOOT="env exist ${bootdev}preboot && run ${bootdev}preboot"
ARM: uniphier: set CONFIG_LOGLEVEL to 6 Print out KERN_NOTICE or higher level log messages. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-24 15:25:31 +00:00
CONFIG_LOGLEVEL=6
ARM: uniphier: enable CONFIG_CMD_CONFIG This command is useful to see which config options are enabled on the running U-Boot image. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-02-21 06:09:11 +00:00
CONFIG_CMD_CONFIG=y
ARM: uniphier: add uniphier_v8_defconfig This defconfig does not support SPL. If you use this, the basic SoC initialization must be done in firmware that runs before U-Boot. (Generally, ARM Trusted Firmware is expected to do this job). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-21 09:05:23 +00:00
# CONFIG_CMD_XIMG is not set
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-14 23:58:53 +00:00
CONFIG_CMD_GPIO=y
ARM: uniphier: enable CONFIG_CMD_GPT Enable CONFIG_CMD_GPT, keeping CONFIG_SPL_EFI_PARTITION because the SPL for UniPhier platform does not recognize any partitions. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-02-17 07:17:55 +00:00
CONFIG_CMD_GPT=y
ARM: uniphier: add uniphier_v8_defconfig This defconfig does not support SPL. If you use this, the basic SoC initialization must be done in firmware that runs before U-Boot. (Generally, ARM Trusted Firmware is expected to do this job). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-21 09:05:23 +00:00
CONFIG_CMD_I2C=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-14 23:58:53 +00:00
CONFIG_CMD_MMC=y
uniphier_{v7, v8}_defconfig: enable SPI driver and sspi command Compile drivers/spi/uniphier_spi.c and cmd/spi.c Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-01-07 09:47:26 +00:00
CONFIG_CMD_SPI=y
ARM: uniphier: add uniphier_v8_defconfig This defconfig does not support SPL. If you use this, the basic SoC initialization must be done in firmware that runs before U-Boot. (Generally, ARM Trusted Firmware is expected to do this job). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-21 09:05:23 +00:00
CONFIG_CMD_USB=y
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
# CONFIG_CMD_MISC is not set
configs: Migrate and re-enabled CONFIG_CMD_MTDPARTS Now that CMD_UBI does not select CMD_MTDPARTS we need to make platforms that had been enabling it turn it on by hand. This exposed that we had not yet migrated CMD_MTDPARTS fully, so do so now. Fixes: 86dfa556d927 ("cmd: ubi: Remove useless call to mtdparts_init()") Signed-off-by: Tom Rini <trini@konsulko.com>
2018-11-14 00:54:45 +00:00
CONFIG_CMD_MTDPARTS=y
ARM: uniphier: enable MTD partition and UBI Enable "mtdparts" and "ubi" commands for uniphier_v8_defconfig to use UBI on NAND devices. Enable only "mtdparts" for uniphier_{v7,ld4_sld8}_defconfig because enabling UBI would increase 170KB, which would be memory footprint problem. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-19 07:28:27 +00:00
CONFIG_MTDIDS_DEFAULT="nand0=uniphier-nand.0"
CONFIG_MTDPARTS_DEFAULT="mtdparts=uniphier-nand.0:1m(firmware),-(UBI)"
CONFIG_CMD_UBI=y
env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol Today in initr_reloc_global_data() we use some non-obvious tests to determine if we need to relocate the env_addr within gd or not. In order to facilitate migration of other symbols to Kconfig we need to introduce a new symbol for this particular use case. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-13 03:46:36 +00:00
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
ARM: uniphier: add uniphier_v8_defconfig This defconfig does not support SPL. If you use this, the basic SoC initialization must be done in firmware that runs before U-Boot. (Generally, ARM Trusted Firmware is expected to do this job). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-21 09:05:23 +00:00
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_GPIO_UNIPHIER=y
CONFIG_MISC=y
CONFIG_I2C_EEPROM=y
Kconfig: Add EEPROM options to Kconfig when I2C_EEPROM is set Add the following options to drivers/misc/Kconfig: SYS_I2C_EEPROM_ADDR SYS_I2C_EEPROM_BUS SYS_EEPROM_SIZE SYS_EEPROM_PAGE_WRITE_BITS SYS_EEPROM_PAGE_WRITE_DELAY_MS SYS_I2C_EEPROM_ADDR_LEN SYS_I2C_EEPROM_ADDR_OVERFLOW This does not migrate any boards, but provides a foundations for those who want/need these options Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate uniphier] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-13 14:00:28 +00:00
CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10
ARM: uniphier_v8: enable CONFIG_SUPPORT_EMMC_RPMB Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-04-12 09:55:51 +00:00
CONFIG_SUPPORT_EMMC_RPMB=y
Convert CONFIG_SUPPORT_EMMC_BOOT to Kconfig This converts the following to Kconfig: CONFIG_SUPPORT_EMMC_BOOT As requested by Michal Simek <michal.simek@xilinx.com>, these boards have no eMMC so CONFIG_SUPPORT_EMMC_BOOT has not been migrated: xilinx_zynqmp_zc1275_revB xilinx_zynqmp_zc1751_xm018_dc4 xilinx_zynqmp_zc1751_xm019_dc5 xilinx_zynqmp_zcu100_revC xilinx_zynqmp_zcu102_rev1_0 xilinx_zynqmp_zcu102_revA xilinx_zynqmp_zcu102_revB xilinx_zynqmp_zcu104_revA xilinx_zynqmp_zcu104_revC xilinx_zynqmp_zcu106_revA xilinx_zynqmp_zcu111_revA Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Acked-by: Lukasz Majewski <lukma@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Ramon Fried <ramon.fried@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2019-05-01 07:58:27 +00:00
CONFIG_SUPPORT_EMMC_BOOT=y
ARM: uniphier: enable CONFIG_MMC_HS400_SUPPORT for uniphier_v8_defconfig The eMMC controller on LD20 or later supports HS-400 mode. It works on a quick test. Enable it in case somebody may want to use it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-27 11:31:18 +00:00
CONFIG_MMC_HS400_SUPPORT=y
ARM: uniphier: add uniphier_v8_defconfig This defconfig does not support SPL. If you use this, the basic SoC initialization must be done in firmware that runs before U-Boot. (Generally, ARM Trusted Firmware is expected to do this job). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-21 09:05:23 +00:00
CONFIG_MMC_UNIPHIER=y
CONFIG_MMC_SDHCI=y
ARM: uniphier: enable CONFIG_MMC_SDHCI_ADMA for uniphier_v8_defconfig Switch over to ADMA from SDMA. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-04 11:13:43 +00:00
CONFIG_MMC_SDHCI_ADMA=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-11 01:27:45 +00:00
CONFIG_MMC_SDHCI_CADENCE=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-12-04 22:18:38 +00:00
CONFIG_MTD=y
mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND Add more clarity by changing the Kconfig entry name. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> [trini: Re-run migration, update a few more cases] Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-10-03 17:50:03 +00:00
CONFIG_MTD_RAW_NAND=y
ARM: uniphier: enable Denali NAND driver for 64bit SoCs Now the entry to the NAND driver init can be is controlled by DT; it should not hurt to compile the driver all the time. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-29 15:51:30 +00:00
CONFIG_NAND_DENALI_DT=y
ARM: uniphier: enable CONFIG_SNI_AVE and disable CONFIG_SMC911X Enable the on-chip ethernet driver for uniphier_{v7,v8}_defconfig. Disable the on-board SMC911x because it has not migrated to the driver model yet - it is not possible to enable DM and non-DM drivers at the same time. The CONFIG_SMC911X for uniphier_ld4_sld8_defconfig is still kept because the on-chip ethernet driver for LD4, sLD8 is not supported yet. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-06-19 07:11:42 +00:00
CONFIG_SNI_AVE=y
ARM: uniphier: enable CONFIG_PINCONF Enable the pin configuration feature for UniPhier 64 bit SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-05 10:53:57 +00:00
CONFIG_PINCONF=y
uniphier_{v7, v8}_defconfig: enable SPI driver and sspi command Compile drivers/spi/uniphier_spi.c and cmd/spi.c Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-01-07 09:47:26 +00:00
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_UNIPHIER_SPI=y
ARM: uniphier: enable PSCI sysreset for uniphier_v8_defconfig This configuration is supposed to be used with ARM Trusted Firmware, so the SYSTEM_RESET is implemented in BL31. Invoke PSCI instead of U-Boot's own reset code because we need to coordinate with SCP (System Control Processor) for the system-level power management. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-04-20 07:54:42 +00:00
CONFIG_SYSRESET=y
CONFIG_SYSRESET_PSCI=y
ARM: uniphier: add uniphier_v8_defconfig This defconfig does not support SPL. If you use this, the basic SoC initialization must be done in firmware that runs before U-Boot. (Generally, ARM Trusted Firmware is expected to do this job). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-21 09:05:23 +00:00
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
ARM: uniphier: enable generic EHCI driver for uniphier_v8_defconfig The LD11 SoC is equipped with USB EHCI controllers. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-02-07 12:25:13 +00:00
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y
ARM: uniphier: enable DWC3 xHCI driver Enable CONFIGs for the DWC3 core and the UniPhier specific glue layer. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-13 17:21:16 +00:00
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_UNIPHIER=y
Move CONFIG_PANIC_HANG to Kconfig Freescale (NXP) boards have lots of defconfig files per board. I used "imply PANIC_HANG" for them. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-04 03:37:00 +00:00
CONFIG_PANIC_HANG=y
ARM: uniphier: enable MTD partition and UBI Enable "mtdparts" and "ubi" commands for uniphier_v8_defconfig to use UBI on NAND devices. Enable only "mtdparts" for uniphier_{v7,ld4_sld8}_defconfig because enabling UBI would increase 170KB, which would be memory footprint problem. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-19 07:28:27 +00:00
CONFIG_FDT_FIXUP_PARTITIONS=y
Reference in a new issue Copy permalink