Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-12 14:23:00 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/configs/elgin-rv1108_defconfig

57 lines
1.4 KiB
Text
Raw Normal View History

ARM: rockchip: Add rv1108-elgin-r1 board support Add the initial support for Elgin R1 board, which is based on the RV1108 SoC and has the following features currently supported in U-Boot: - UART - eMMC - USB Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-12-01 14:05:54 +00:00
CONFIG_ARM=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x60000000
env: Finish migration of common ENV options - In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-19 01:02:10 +00:00
CONFIG_ENV_OFFSET=0x3F8000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-22 18:38:00 +00:00
CONFIG_ROCKCHIP_RV1108=y
elgin-rv1108: Avoid adc_channel_single_shot error Currently the following error message is seen during boot: U-Boot 2020.01-08751-g55759ae141 (Mar 09 2020 - 14:44:52 -0300) Model: Elgin RV1108 R1 board DRAM: 128 MiB APLL: 600000000 DPLL:1200000000 GPLL:1188000000 ACLK_BUS: 148500000 ACLK_PERI:148500000 HCLK_PERI:148500000 PCLK_PERI:74250000 MMC: dwmmc@30110000: 0 Loading Environment from MMC... OK In: serial@10210000 Out: serial@10210000 Err: serial@10210000 Model: Elgin RV1108 R1 board rockchip_dnl_key_pressed: adc_channel_single_shot fail! .... Since the elgin-rv1108 does not use ADC to read the download key status, select CONFIG_ROCKCHIP_BOOT_MODE_REG=0 to avoid such error. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-03-13 17:42:47 +00:00
CONFIG_ROCKCHIP_BOOT_MODE_REG=0
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-28 20:15:47 +00:00
CONFIG_TARGET_ELGIN_RV1108=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-29 19:54:04 +00:00
CONFIG_NR_DRAM_BANKS=1
ARM: rockchip: Add rv1108-elgin-r1 board support Add the initial support for Elgin R1 board, which is based on the RV1108 SoC and has the following features currently supported in U-Boot: - UART - eMMC - USB Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-12-01 14:05:54 +00:00
CONFIG_DEBUG_UART_BASE=0x10210000
CONFIG_DEBUG_UART_CLOCK=24000000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-28 12:46:52 +00:00
CONFIG_DEFAULT_DEVICE_TREE="rv1108-elgin-r1"
ARM: rockchip: Add rv1108-elgin-r1 board support Add the initial support for Elgin R1 board, which is based on the RV1108 SoC and has the following features currently supported in U-Boot: - UART - eMMC - USB Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-12-01 14:05:54 +00:00
CONFIG_DEBUG_UART=y
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_DEFAULT_FDT_FILE="rv1108-elgin-r1.dtb"
elgin-rv1108: Use rk_board_late_init() for GPIO settings Since commit 8e9a8d0d0c8c ("rockchip: elgin-rv1108: use board_early_init_f for per-boar init") the function that configure the board GPIOs is no longer called since CONFIG_BOARD_EARLY_INIT_F=y is not selected. These GPIOs do not need to be configured in such early stagem, so change it to rk_board_late_init() and also select CONFIG_BOARD_LATE_INIT=y to fix the regression. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-03-13 17:42:46 +00:00
CONFIG_BOARD_LATE_INIT=y
ARM: rockchip: Add rv1108-elgin-r1 board support Add the initial support for Elgin R1 board, which is based on the RV1108 SoC and has the following features currently supported in U-Boot: - UART - eMMC - USB Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-12-01 14:05:54 +00:00
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_CMD_GPIO=y
CONFIG_RANDOM_UUID=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
CONFIG_ENV_IS_IN_MMC=y
env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol Today in initr_reloc_global_data() we use some non-obvious tests to determine if we need to relocate the env_addr within gd or not. In order to facilitate migration of other symbols to Kconfig we need to introduce a new symbol for this particular use case. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-13 03:46:36 +00:00
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
ARM: rockchip: Add rv1108-elgin-r1 board support Add the initial support for Elgin R1 board, which is based on the RV1108 SoC and has the following features currently supported in U-Boot: - UART - eMMC - USB Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-12-01 14:05:54 +00:00
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
CONFIG_CLK=y
CONFIG_FASTBOOT_BUF_ADDR=0x62000000
CONFIG_FASTBOOT_BUF_SIZE=0x08000000
CONFIG_ROCKCHIP_GPIO=y
CONFIG_SYS_I2C_ROCKCHIP=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_ROCKCHIP=y
CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_GMAC_ROCKCHIP=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_ROCKCHIP_RV1108=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_BAUDRATE=1500000
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_SYSRESET=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_GENERIC=y
CONFIG_USB_DWC2=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_PRODUCT_NUM=0x110a
CONFIG_USB_GADGET_DWC2_OTG=y
CONFIG_ERRNO_STR=y
Reference in a new issue Copy permalink