u-boot/board/exbitgen/init.S

1012 lines
28 KiB
ArmAsm
Raw Normal View History

/*----------------------------------------------------------------------+
* This source code is dual-licensed. You may use it under the terms of
* the GNU General Public License version 2, or under the license below.
*
* This source code has been made available to you by IBM on an AS-IS
* basis. Anyone receiving this source is licensed under IBM
* copyrights to use it in any way he or she deems fit, including
* copying it, modifying it, compiling it, and redistributing it either
* with or without modifications. No license under IBM patents or
* patent applications is to be implied by the copyright license.
*
* Any user of this software should understand that IBM cannot provide
* technical support for this software and will not be responsible for
* any consequences resulting from the use of this software.
*
* Any person who transfers this source code or any derivative work
* must include the IBM copyright notice, this paragraph, and the
* preceding two paragraphs in the transferred software.
*
* COPYRIGHT I B M CORPORATION 1995
* LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
*-----------------------------------------------------------------------
*/
#include <config.h>
#include <ppc4xx.h>
#include "config.h"
#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
#define FPGA_BRDC 0xF0300004
#include <ppc_asm.tmpl>
#include <ppc_defs.h>
#include <asm/cache.h>
#include <asm/mmu.h>
#include "exbitgen.h"
/* IIC declarations (This is an extract from 405gp_i2c.h, which also contains some */
/* c-code declarations and consequently can't be included here). */
/* (Possibly to be solved somehow else). */
/*--------------------------------------------------------------------- */
#define I2C_REGISTERS_BASE_ADDRESS 0xEF600500
#define IIC_MDBUF (I2C_REGISTERS_BASE_ADDRESS+IICMDBUF)
#define IIC_SDBUF (I2C_REGISTERS_BASE_ADDRESS+IICSDBUF)
#define IIC_LMADR (I2C_REGISTERS_BASE_ADDRESS+IICLMADR)
#define IIC_HMADR (I2C_REGISTERS_BASE_ADDRESS+IICHMADR)
#define IIC_CNTL (I2C_REGISTERS_BASE_ADDRESS+IICCNTL)
#define IIC_MDCNTL (I2C_REGISTERS_BASE_ADDRESS+IICMDCNTL)
#define IIC_STS (I2C_REGISTERS_BASE_ADDRESS+IICSTS)
#define IIC_EXTSTS (I2C_REGISTERS_BASE_ADDRESS+IICEXTSTS)
#define IIC_LSADR (I2C_REGISTERS_BASE_ADDRESS+IICLSADR)
#define IIC_HSADR (I2C_REGISTERS_BASE_ADDRESS+IICHSADR)
#define IIC_CLKDIV (I2C_REGISTERS_BASE_ADDRESS+IICCLKDIV)
#define IIC_INTRMSK (I2C_REGISTERS_BASE_ADDRESS+IICINTRMSK)
#define IIC_XFRCNT (I2C_REGISTERS_BASE_ADDRESS+IICXFRCNT)
#define IIC_XTCNTLSS (I2C_REGISTERS_BASE_ADDRESS+IICXTCNTLSS)
#define IIC_DIRECTCNTL (I2C_REGISTERS_BASE_ADDRESS+IICDIRECTCNTL)
/* MDCNTL Register Bit definition */
#define IIC_MDCNTL_HSCL 0x01
#define IIC_MDCNTL_EUBS 0x02
#define IIC_MDCNTL_FMDB 0x40
#define IIC_MDCNTL_FSDB 0x80
/* CNTL Register Bit definition */
#define IIC_CNTL_PT 0x01
#define IIC_CNTL_READ 0x02
#define IIC_CNTL_CHT 0x04
/* STS Register Bit definition */
#define IIC_STS_PT 0X01
#define IIC_STS_ERR 0X04
#define IIC_STS_MDBS 0X20
/* EXTSTS Register Bit definition */
#define IIC_EXTSTS_XFRA 0X01
#define IIC_EXTSTS_ICT 0X02
#define IIC_EXTSTS_LA 0X04
/* LED codes used for inditing progress and errors during read of DIMM SPD. */
/*--------------------------------------------------------------------- */
#define LED_SDRAM_CODE_1 0xef
#define LED_SDRAM_CODE_2 0xee
#define LED_SDRAM_CODE_3 0xed
#define LED_SDRAM_CODE_4 0xec
#define LED_SDRAM_CODE_5 0xeb
#define LED_SDRAM_CODE_6 0xea
#define LED_SDRAM_CODE_7 0xe9
#define LED_SDRAM_CODE_8 0xe8
#define LED_SDRAM_CODE_9 0xe7
#define LED_SDRAM_CODE_10 0xe6
#define LED_SDRAM_CODE_11 0xe5
#define LED_SDRAM_CODE_12 0xe4
#define LED_SDRAM_CODE_13 0xe3
#define LED_SDRAM_CODE_14 0xe2
#define LED_SDRAM_CODE_15 0xe1
#define LED_SDRAM_CODE_16 0xe0
#define TIMEBASE_10PS (1000000000 / CONFIG_SYS_CLK_FREQ) * 100
#define FLASH_8bit_AP 0x9B015480
#define FLASH_8bit_CR 0xFFF18000 /* 1MB(min), 8bit, R/W */
#define FLASH_32bit_AP 0x9B015480
#define FLASH_32bit_CR 0xFFE3C000 /* 2MB, 32bit, R/W */
#define WDCR_EBC(reg,val) addi r4,0,reg;\
mtdcr ebccfga,r4;\
addis r4,0,val@h;\
ori r4,r4,val@l;\
mtdcr ebccfgd,r4
/*---------------------------------------------------------------------
* Function: ext_bus_cntlr_init
* Description: Initializes the External Bus Controller for the external
* peripherals. IMPORTANT: For pass1 this code must run from
* cache since you can not reliably change a peripheral banks
* timing register (pbxap) while running code from that bank.
* For ex., since we are running from ROM on bank 0, we can NOT
* execute the code that modifies bank 0 timings from ROM, so
* we run it from cache.
* Bank 0 - Boot flash
* Bank 1-4 - application flash
* Bank 5 - CPLD
* Bank 6 - not used
* Bank 7 - Heathrow chip
*---------------------------------------------------------------------
*/
.globl ext_bus_cntlr_init
ext_bus_cntlr_init:
mflr r4 /* save link register */
bl ..getAddr
..getAddr:
mflr r3 /* get address of ..getAddr */
mtlr r4 /* restore link register */
addi r4,0,14 /* set ctr to 10; used to prefetch */
mtctr r4 /* 10 cache lines to fit this function */
/* in cache (gives us 8x10=80 instrctns) */
..ebcloop:
icbt r0,r3 /* prefetch cache line for addr in r3 */
addi r3,r3,32 /* move to next cache line */
bdnz ..ebcloop /* continue for 10 cache lines */
mflr r31 /* save link register */
/*-----------------------------------------------------------
* Delay to ensure all accesses to ROM are complete before changing
* bank 0 timings. 200usec should be enough.
* 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles
*-----------------------------------------------------------
*/
addis r3,0,0x0
ori r3,r3,0xA000 /* ensure 200usec have passed since reset */
mtctr r3
..spinlp:
bdnz ..spinlp /* spin loop */
/*---------------------------------------------------------------
* Memory Bank 0 (Boot Flash) initialization
*---------------------------------------------------------------
*/
WDCR_EBC(pb0ap, FLASH_32bit_AP)
WDCR_EBC(pb0cr, 0xffe38000)
/*pnc WDCR_EBC(pb0cr, FLASH_32bit_CR) */
/*---------------------------------------------------------------
* Memory Bank 5 (CPLD) initialization
*---------------------------------------------------------------
*/
WDCR_EBC(pb5ap, 0x01010040)
/*jsa recommendation: WDCR_EBC(pb5ap, 0x00010040) */
WDCR_EBC(pb5cr, 0x10038000)
/*--------------------------------------------------------------- */
/* Memory Bank 6 (not used) initialization */
/*--------------------------------------------------------------- */
WDCR_EBC(pb6cr, 0x00000000)
/* Read HW ID to determine whether old H2 board or new generic CPU board */
addis r3, 0, HW_ID_ADDR@h
ori r3, r3, HW_ID_ADDR@l
lbz r3,0x0000(r3)
cmpi 0, r3, 1 /* if (HW_ID==1) */
beq setup_h2evalboard /* then jump */
cmpi 0, r3, 2 /* if (HW_ID==2) */
beq setup_genieboard /* then jump */
cmpi 0, r3, 3 /* if (HW_ID==3) */
beq setup_genieboard /* then jump */
setup_genieboard:
/*--------------------------------------------------------------- */
/* Memory Bank 1 (Application Flash) initialization for generic CPU board */
/*--------------------------------------------------------------- */
/* WDCR_EBC(pb1ap, 0x7b015480) /###* T.B.M. */
/* WDCR_EBC(pb1ap, 0x7F8FFE80) /###* T.B.M. */
WDCR_EBC(pb1ap, 0x9b015480) /* hlb-20020207: burst 8 bit 6 cycles */
/* WDCR_EBC(pb1cr, 0x20098000) /###* 16 MB */
WDCR_EBC(pb1cr, 0x200B8000) /* 32 MB */
/*--------------------------------------------------------------- */
/* Memory Bank 4 (Onboard FPGA) initialization for generic CPU board */
/*--------------------------------------------------------------- */
WDCR_EBC(pb4ap, 0x01010000) /* */
WDCR_EBC(pb4cr, 0x1021c000) /* */
/*--------------------------------------------------------------- */
/* Memory Bank 7 (Heathrow chip on Reference board) initialization */
/*--------------------------------------------------------------- */
WDCR_EBC(pb7ap, 0x200ffe80) /* No Ready, many wait states (let reflections die out) */
WDCR_EBC(pb7cr, 0X4001A000)
bl setup_continue
setup_h2evalboard:
/*--------------------------------------------------------------- */
/* Memory Bank 1 (Application Flash) initialization */
/*--------------------------------------------------------------- */
WDCR_EBC(pb1ap, 0x7b015480) /* T.B.M. */
/*3010 WDCR_EBC(pb1ap, 0x7F8FFE80) /###* T.B.M. */
WDCR_EBC(pb1cr, 0x20058000)
/*--------------------------------------------------------------- */
/* Memory Bank 2 (Application Flash) initialization */
/*--------------------------------------------------------------- */
WDCR_EBC(pb2ap, 0x7b015480) /* T.B.M. */
/*3010 WDCR_EBC(pb2ap, 0x7F8FFE80) /###* T.B.M. */
WDCR_EBC(pb2cr, 0x20458000)
/*--------------------------------------------------------------- */
/* Memory Bank 3 (Application Flash) initialization */
/*--------------------------------------------------------------- */
WDCR_EBC(pb3ap, 0x7b015480) /* T.B.M. */
/*3010 WDCR_EBC(pb3ap, 0x7F8FFE80) /###* T.B.M. */
WDCR_EBC(pb3cr, 0x20858000)
/*--------------------------------------------------------------- */
/* Memory Bank 4 (Application Flash) initialization */
/*--------------------------------------------------------------- */
WDCR_EBC(pb4ap, 0x7b015480) /* T.B.M. */
/*3010 WDCR_EBC(pb4ap, 0x7F8FFE80) /###* T.B.M. */
WDCR_EBC(pb4cr, 0x20C58000)
/*--------------------------------------------------------------- */
/* Memory Bank 7 (Heathrow chip) initialization */
/*--------------------------------------------------------------- */
WDCR_EBC(pb7ap, 0x02000280) /* No Ready, 4 wait states */
WDCR_EBC(pb7cr, 0X4001A000)
setup_continue:
mtlr r31 /* restore lr */
nop /* pass2 DCR errata #8 */
blr
/*--------------------------------------------------------------------- */
/* Function: sdram_init */
/* Description: Configures SDRAM memory banks. */
/*--------------------------------------------------------------------- */
.globl sdram_init
sdram_init:
#if CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE
blr
#else
mflr r31
/* output SDRAM code on LEDs */
addi r4, 0, LED_SDRAM_CODE_1
addis r5, 0, 0x1000
ori r5, r5, 0x0001
stb r4,0(r5)
eieio
/* Read contents of spd */
/*--------------------- */
bl read_spd
/*----------------------------------------------------------- */
/* */
/* */
/* Update SDRAM timing register */
/* */
/* */
/*----------------------------------------------------------- */
/* Read PLL feedback divider and calculate clock period of local bus in */
/* granularity of 10 ps. Save clock period in r30 */
/*-------------------------------------------------------------- */
mfdcr r4, pllmd
addi r9, 0, 25
srw r4, r4, r9
andi. r4, r4, 0x07
addis r5, 0, TIMEBASE_10PS@h
ori r5, r5, TIMEBASE_10PS@l
divwu r30, r5, r4
/* Determine CASL */
/*--------------- */
bl find_casl /* Returns CASL in r3 */
/* Calc trp_clocks = (trp * 100 + (clk - 1)) / clk */
/* (trp read from byte 27 in granularity of 1 ns) */
/*------------------------------------------------ */
mulli r16, r16, 100
add r16, r16, r30
addi r6, 0, 1
subf r16, r6, r16
divwu r16, r16, r30
/* Calc trcd_clocks = (trcd * 100 + (clk - 1) ) / clk */
/* (trcd read from byte 29 in granularity of 1 ns) */
/*--------------------------------------------------- */
mulli r17, r17, 100
add r17, r17, r30
addi r6, 0, 1
subf r17, r6, r17
divwu r17, r17, r30
/* Calc tras_clocks = (tras * 100 + (clk - 1) ) / clk */
/* (tras read from byte 30 in granularity of 1 ns) */
/*--------------------------------------------------- */
mulli r18, r18, 100
add r18, r18, r30
addi r6, 0, 1
subf r18, r6, r18
divwu r18, r18, r30
/* Calc trc_clocks = trp_clocks + tras_clocks */
/*------------------------------------------- */
add r18, r18, r16
/* CASL value */
/*----------- */
addi r9, 0, 23
slw r4, r3, r9
/* PTA = trp_clocks - 1 */
/*--------------------- */
addi r6, 0, 1
subf r5, r6, r16
addi r9, 0, 18
slw r5, r5, r9
or r4, r4, r5
/* CTP = trc_clocks - trp_clocks - trcd_clocks - 1 */
/*------------------------------------------------ */
addi r5, r18, 0
subf r5, r16, r5
subf r5, r17, r5
addi r6, 0, 1
subf r5, r6, r5
addi r9, 0, 16
slw r5, r5, r9
or r4, r4, r5
/* LDF = 1 */
/*-------- */
ori r4, r4, 0x4000
/* RFTA = trc_clocks - 4 */
/*---------------------- */
addi r6, 0, 4
subf r5, r6, r18
addi r9, 0, 2
slw r5, r5, r9
or r4, r4, r5
/* RCD = trcd_clocks - 1 */
/*---------------------- */
addi r6, 0, 1
subf r5, r6, r17
or r4, r4, r5
/*----------------------------------------------------------- */
/* Set SDTR1 */
/*----------------------------------------------------------- */
addi r5,0,mem_sdtr1
mtdcr memcfga,r5
mtdcr memcfgd,r4
/*----------------------------------------------------------- */
/* */
/* */
/* Update memory bank 0-3 configuration registers */
/* */
/* */
/*----------------------------------------------------------- */
/* Build contents of configuration register for bank 0 into r6 */
/*------------------------------------------------------------ */
bl find_mode /* returns addressing mode in r3 */
addi r29, r3, 0 /* save mode temporarily in r29 */
bl find_size_code /* returns size code in r3 */
addi r9, 0, 17 /* bit offset of size code in configuration register */
slw r3, r3, r9 /* */
addi r9, 0, 13 /* bit offset of addressing mode in configuration register */
slw r29, r29, r9 /* */
or r3, r29, r3 /* merge size code and addressing mode */
ori r6, r3, CONFIG_SYS_SDRAM_BASE + 1 /* insert base address and enable bank */
/* Calculate banksize r15 = (density << 22) / 2 */
/*--------------------------------------------- */
addi r9, 0, 21
slw r15, r15, r9
/* Set SDRAM bank 0 register and adjust r6 for next bank */
/*------------------------------------------------------ */
addi r7,0,mem_mb0cf
mtdcr memcfga,r7
mtdcr memcfgd,r6
add r6, r6, r15 /* add bank size to base address for next bank */
/* If two rows/banks then set SDRAM bank 1 register and adjust r6 for next bank */
/*---------------------------------------------------------------------------- */
cmpi 0, r12, 2
bne b1skip
addi r7,0,mem_mb1cf
mtdcr memcfga,r7
mtdcr memcfgd,r6
add r6, r6, r15 /* add bank size to base address for next bank */
/* Set SDRAM bank 2 register and adjust r6 for next bank */
/*------------------------------------------------------ */
b1skip: addi r7,0,mem_mb2cf
mtdcr memcfga,r7
mtdcr memcfgd,r6
add r6, r6, r15 /* add bank size to base address for next bank */
/* If two rows/banks then set SDRAM bank 3 register */
/*------------------------------------------------ */
cmpi 0, r12, 2
bne b3skip
addi r7,0,mem_mb3cf
mtdcr memcfga,r7
mtdcr memcfgd,r6
b3skip:
/*----------------------------------------------------------- */
/* Set RTR */
/*----------------------------------------------------------- */
cmpi 0, r30, 1600
bge rtr_1
addis r7, 0, 0x05F0 /* RTR value for 100Mhz */
bl rtr_2
rtr_1: addis r7, 0, 0x03F8
rtr_2: addi r4,0,mem_rtr
mtdcr memcfga,r4
mtdcr memcfgd,r7
/*----------------------------------------------------------- */
/* Delay to ensure 200usec have elapsed since reset. Assume worst */
/* case that the core is running 200Mhz: */
/* 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles */
/*----------------------------------------------------------- */
addis r3,0,0x0000
ori r3,r3,0xA000 /* ensure 200usec have passed since reset */
mtctr r3
..spinlp2:
bdnz ..spinlp2 /* spin loop */
/*----------------------------------------------------------- */
/* Set memory controller options reg, MCOPT1. */
/* Set DC_EN to '1' and BRD_PRF to '01' for 16 byte PLB Burst */
/* read/prefetch. */
/*----------------------------------------------------------- */
addi r4,0,mem_mcopt1
mtdcr memcfga,r4
addis r4,0,0x80C0 /* set DC_EN=1 */
ori r4,r4,0x0000
mtdcr memcfgd,r4
/*----------------------------------------------------------- */
/* Delay to ensure 10msec have elapsed since reset. This is */
/* required for the MPC952 to stabalize. Assume worst */
/* case that the core is running 200Mhz: */
/* 200,000,000 (cycles/sec) X .010 (sec) = 0x1E8480 cycles */
/* This delay should occur before accessing SDRAM. */
/*----------------------------------------------------------- */
addis r3,0,0x001E
ori r3,r3,0x8480 /* ensure 10msec have passed since reset */
mtctr r3
..spinlp3:
bdnz ..spinlp3 /* spin loop */
/* output SDRAM code on LEDs */
addi r4, 0, LED_SDRAM_CODE_16
addis r5, 0, 0x1000
ori r5, r5, 0x0001
stb r4,0(r5)
eieio
mtlr r31 /* restore lr */
blr
/*--------------------------------------------------------------------- */
/* Function: read_spd */
/* Description: Reads contents of SPD and saves parameters to be used for */
/* configuration in dedicated registers (see code below). */
/*--------------------------------------------------------------------- */
#define WRITE_I2C(reg,val) \
addi r3,0,val;\
addis r4, 0, 0xef60;\
ori r4, r4, 0x0500 + reg;\
stb r3, 0(r4);\
eieio
#define READ_I2C(reg) \
addis r3, 0, 0xef60;\
ori r3, r3, 0x0500 + reg;\
lbz r3, 0x0000(r3);\
eieio
read_spd:
mflr r5
/* Initialize i2c */
/*--------------- */
WRITE_I2C(IICLMADR, 0x00) /* clear lo master address */
WRITE_I2C(IICHMADR, 0x00) /* clear hi master address */
WRITE_I2C(IICLSADR, 0x00) /* clear lo slave address */
WRITE_I2C(IICHSADR, 0x00) /* clear hi slave address */
WRITE_I2C(IICSTS, 0x08) /* update status register */
WRITE_I2C(IICEXTSTS, 0x8f)
WRITE_I2C(IICCLKDIV, 0x05)
WRITE_I2C(IICINTRMSK, 0x00) /* no interrupts */
WRITE_I2C(IICXFRCNT, 0x00) /* clear transfer count */
WRITE_I2C(IICXTCNTLSS, 0xf0) /* clear extended control & stat */
WRITE_I2C(IICMDCNTL, IIC_MDCNTL_FSDB | IIC_MDCNTL_FMDB) /* mode control */
READ_I2C(IICMDCNTL)
ori r3, r3, IIC_MDCNTL_EUBS | IIC_MDCNTL_HSCL
WRITE_I2C(IICMDCNTL, r3) /* mode control */
WRITE_I2C(IICCNTL, 0x00) /* clear control reg */
/* Wait until initialization completed */
/*------------------------------------ */
bl wait_i2c_transfer_done
WRITE_I2C(IICHMADR, 0x00) /* 7-bit addressing */
WRITE_I2C(IICLMADR, SDRAM_SPD_WRITE_ADDRESS)
/* Write 0 into buffer(start address) */
/*----------------------------------- */
WRITE_I2C(IICMDBUF, 0x00);
/* Wait a little */
/*-------------- */
addis r3,0,0x0000
ori r3,r3,0xA000
mtctr r3
in02: bdnz in02
/* Issue write command */
/*-------------------- */
WRITE_I2C(IICCNTL, IIC_CNTL_PT)
bl wait_i2c_transfer_done
/* Read 128 bytes */
/*--------------- */
addi r7, 0, 0 /* byte counter in r7 */
addi r8, 0, 0 /* checksum in r8 */
rdlp:
/* issue read command */
/*------------------- */
cmpi 0, r7, 127
blt rd01
WRITE_I2C(IICCNTL, IIC_CNTL_READ | IIC_CNTL_PT)
bl rd02
rd01: WRITE_I2C(IICCNTL, IIC_CNTL_READ | IIC_CNTL_CHT | IIC_CNTL_PT)
rd02: bl wait_i2c_transfer_done
/* Fetch byte from buffer */
/*----------------------- */
READ_I2C(IICMDBUF)
/* Retrieve parameters that are going to be used during configuration. */
/* Save them in dedicated registers. */
/*------------------------------------------------------------ */
cmpi 0, r7, 3 /* Save byte 3 in r10 */
bne rd10
addi r10, r3, 0
rd10: cmpi 0, r7, 4 /* Save byte 4 in r11 */
bne rd11
addi r11, r3, 0
rd11: cmpi 0, r7, 5 /* Save byte 5 in r12 */
bne rd12
addi r12, r3, 0
rd12: cmpi 0, r7, 17 /* Save byte 17 in r13 */
bne rd13
addi r13, r3, 0
rd13: cmpi 0, r7, 18 /* Save byte 18 in r14 */
bne rd14
addi r14, r3, 0
rd14: cmpi 0, r7, 31 /* Save byte 31 in r15 */
bne rd15
addi r15, r3, 0
rd15: cmpi 0, r7, 27 /* Save byte 27 in r16 */
bne rd16
addi r16, r3, 0
rd16: cmpi 0, r7, 29 /* Save byte 29 in r17 */
bne rd17
addi r17, r3, 0
rd17: cmpi 0, r7, 30 /* Save byte 30 in r18 */
bne rd18
addi r18, r3, 0
rd18: cmpi 0, r7, 9 /* Save byte 9 in r19 */
bne rd19
addi r19, r3, 0
rd19: cmpi 0, r7, 23 /* Save byte 23 in r20 */
bne rd20
addi r20, r3, 0
rd20: cmpi 0, r7, 25 /* Save byte 25 in r21 */
bne rd21
addi r21, r3, 0
rd21:
/* Calculate checksum of the first 63 bytes */
/*----------------------------------------- */
cmpi 0, r7, 63
bgt rd31
beq rd30
add r8, r8, r3
bl rd31
/* Verify checksum at byte 63 */
/*--------------------------- */
rd30: andi. r8, r8, 0xff /* use only 8 bits */
cmp 0, r8, r3
beq rd31
addi r4, 0, LED_SDRAM_CODE_8
addis r5, 0, 0x1000
ori r5, r5, 0x0001
stb r4,0(r5)
eieio
rderr: bl rderr
rd31:
/* Increment byte counter and check whether all bytes have been read. */
/*------------------------------------------------------------------- */
addi r7, r7, 1
cmpi 0, r7, 127
bgt rd05
bl rdlp
rd05:
mtlr r5 /* restore lr */
blr
wait_i2c_transfer_done:
mflr r6
wt01: READ_I2C(IICSTS)
andi. r4, r3, IIC_STS_PT
cmpi 0, r4, IIC_STS_PT
beq wt01
mtlr r6 /* restore lr */
blr
/*--------------------------------------------------------------------- */
/* Function: find_mode */
/* Description: Determines addressing mode to be used dependent on */
/* number of rows (r10 = byte 3 from SPD), number of columns (r11 = */
/* byte 4 from SPD) and number of banks (r13 = byte 17 from SPD). */
/* mode is returned in r3. */
/* (It would be nicer having a table, pnc). */
/*--------------------------------------------------------------------- */
find_mode:
mflr r5
cmpi 0, r10, 11
bne fm01
cmpi 0, r11, 9
bne fm01
cmpi 0, r13, 2
bne fm01
addi r3, 0, 1
bl fmfound
fm01: cmpi 0, r10, 11
bne fm02
cmpi 0, r11, 10
bne fm02
cmpi 0, r13, 2
bne fm02
addi r3, 0, 1
bl fmfound
fm02: cmpi 0, r10, 12
bne fm03
cmpi 0, r11, 9
bne fm03
cmpi 0, r13, 4
bne fm03
addi r3, 0, 2
bl fmfound
fm03: cmpi 0, r10, 12
bne fm04
cmpi 0, r11, 10
bne fm04
cmpi 0, r13, 4
bne fm04
addi r3, 0, 2
bl fmfound
fm04: cmpi 0, r10, 13
bne fm05
cmpi 0, r11, 9
bne fm05
cmpi 0, r13, 4
bne fm05
addi r3, 0, 3
bl fmfound
fm05: cmpi 0, r10, 13
bne fm06
cmpi 0, r11, 10
bne fm06
cmpi 0, r13, 4
bne fm06
addi r3, 0, 3
bl fmfound
fm06: cmpi 0, r10, 13
bne fm07
cmpi 0, r11, 11
bne fm07
cmpi 0, r13, 4
bne fm07
addi r3, 0, 3
bl fmfound
fm07: cmpi 0, r10, 12
bne fm08
cmpi 0, r11, 8
bne fm08
cmpi 0, r13, 2
bne fm08
addi r3, 0, 4
bl fmfound
fm08: cmpi 0, r10, 12
bne fm09
cmpi 0, r11, 8
bne fm09
cmpi 0, r13, 4
bne fm09
addi r3, 0, 4
bl fmfound
fm09: cmpi 0, r10, 11
bne fm10
cmpi 0, r11, 8
bne fm10
cmpi 0, r13, 2
bne fm10
addi r3, 0, 5
bl fmfound
fm10: cmpi 0, r10, 11
bne fm11
cmpi 0, r11, 8
bne fm11
cmpi 0, r13, 4
bne fm11
addi r3, 0, 5
bl fmfound
fm11: cmpi 0, r10, 13
bne fm12
cmpi 0, r11, 8
bne fm12
cmpi 0, r13, 2
bne fm12
addi r3, 0, 6
bl fmfound
fm12: cmpi 0, r10, 13
bne fm13
cmpi 0, r11, 8
bne fm13
cmpi 0, r13, 4
bne fm13
addi r3, 0, 6
bl fmfound
fm13: cmpi 0, r10, 13
bne fm14
cmpi 0, r11, 9
bne fm14
cmpi 0, r13, 2
bne fm14
addi r3, 0, 7
bl fmfound
fm14: cmpi 0, r10, 13
bne fm15
cmpi 0, r11, 10
bne fm15
cmpi 0, r13, 2
bne fm15
addi r3, 0, 7
bl fmfound
fm15:
/* not found, error code to be issued on LEDs */
addi r7, 0, LED_SDRAM_CODE_2
addis r6, 0, 0x1000
ori r6, r6, 0x0001
stb r7,0(r6)
eieio
fmerr: bl fmerr
fmfound:addi r6, 0, 1
subf r3, r6, r3
mtlr r5 /* restore lr */
blr
/*--------------------------------------------------------------------- */
/* Function: find_size_code */
/* Description: Determines size code to be used in configuring SDRAM controller */
/* dependent on density (r15 = byte 31 from SPD) */
/*--------------------------------------------------------------------- */
find_size_code:
mflr r5
addi r3, r15, 0 /* density */
addi r7, 0, 0
fs01: andi. r6, r3, 0x01
cmpi 0, r6, 1
beq fs04
addi r7, r7, 1
cmpi 0, r7, 7
bge fs02
addi r9, 0, 1
srw r3, r3, r9
bl fs01
/* not found, error code to be issued on LEDs */
fs02: addi r4, 0, LED_SDRAM_CODE_3
addis r8, 0, 0x1000
ori r8, r8, 0x0001
stb r4,0(r8)
eieio
fs03: bl fs03
fs04: addi r3, r7, 0
cmpi 0, r3, 0
beq fs05
addi r6, 0, 1
subf r3, r6, r3
fs05:
mtlr r5 /* restore lr */
blr
/*--------------------------------------------------------------------- */
/* Function: find_casl */
/* Description: Determines CAS latency */
/*--------------------------------------------------------------------- */
find_casl:
mflr r5
andi. r14, r14, 0x7f /* r14 holds supported CAS latencies */
addi r3, 0, 0xff /* preset determined CASL */
addi r4, 0, 6 /* Start at bit 6 of supported CAS latencies */
addi r2, 0, 0 /* Start finding highest CAS latency */
fc01: srw r6, r14, r4 /* */
andi. r6, r6, 0x01 /* */
cmpi 0, r6, 1 /* Check bit for current latency */
bne fc06 /* If not supported, go to next */
cmpi 0, r2, 2 /* Check if third-highest latency */
bge fc04 /* If so, go calculate with another format */
cmpi 0, r2, 0 /* Check if highest latency */
bgt fc02 /* */
addi r7, r19, 0 /* SDRAM cycle time for highest CAS latenty */
bl fc03
fc02:
addi r7, r20, 0 /* SDRAM cycle time for next-highest CAS latenty */
fc03:
addi r8, r7, 0
addi r9, 0, 4
srw r7, r7, r9
andi. r7, r7, 0x0f
mulli r7, r7, 100
andi. r8, r8, 0x0f
mulli r8, r8, 10
add r7, r7, r8
cmp 0, r7, r30
bgt fc05
addi r3, r2, 0
bl fc05
fc04:
addi r7, r21, 0 /* SDRAM cycle time for third-highest CAS latenty */
addi r8, r7, 0
addi r9, 0, 2
srw r7, r7, r9
andi. r7, r7, 0x3f
mulli r7, r7, 100
andi. r8, r8, 0x03
mulli r8, r8, 25
add r7, r7, r8
cmp 0, r7, r30
bgt fc05
addi r3, r2, 0
fc05: addi r2, r2, 1 /* next latency */
cmpi 0, r2, 3
bge fc07
fc06: addi r6, 0, 1
subf r4, r6, r4
cmpi 0, r4, 0
bne fc01
fc07:
mtlr r5 /* restore lr */
blr
#endif
/* Peripheral Bank 1 Access Parameters */
/* 0 BME = 1 ; burstmode enabled */
/* " 1:8" TWT=00110110 ;Transfer wait (details below) */
/* 1:5 FWT=00110 ; first wait = 6 cycles */
/* 6:8 BWT=110 ; burst wait = 6 cycles */
/* 9:11 000 ; reserved */
/* 12:13 CSN=00 ; chip select on timing = 0 */
/* 14:15 OEN=01 ; output enable */
/* 16:17 WBN=01 ; write byte enable on timing 1 cycle */
/* 18:19 WBF=01 ; write byte enable off timing 1 cycle */
/* 20:22 TH=010 ; transfer hold = 2 cycles */
/* 23 RE=0 ; ready enable = disabled */
/* 24 SOR=1 ; sample on ready = same PerClk */
/* 25 BEM=0 ; byte enable mode = only for write cycles */
/* 26 PEN=0 ; parity enable = disable */
/* 27:31 00000 ;reserved */
/* */
/* 1 + 00110 + 110 + 000 + 00 + 01 + 01 + 01 + 010 + 0 + 1 + 0 + 0 + 00000 = 0x9b015480 */
/* */
/* */
/* Code for BDI probe: */
/* */
/* WDCR 18 0x00000011 ;Select PB1AP */
/* WDCR 19 0x1b015480 ;PB1AP: Flash */
/* */
/* Peripheral Bank 0 Access Parameters */
/* 0:11 BAS=0x200 ; base address select = 0x200 * 0x100000 (1MB) = */
/* 12:14 BS=100 ; bank size = 16MB (100) / 32MB (101) */
/* 15:16 BU=11 ; bank usage = read/write */
/* 17:18 BW=00 ; bus width = 8-bit */
/* 19:31 ; reserved */
/* */
/* 0x200 + 100 + 11 + 00 + 0 0000 0000 0000 = 0x20098000 */
/* WDCR 18 0x00000001 ;Select PB1CR */
/* WDCR 19 0x20098000 ;PB1CR: 1MB at 0x00100000, r/w, 8bit */
/* For CPLD */
/* 0 + 00000 + 010 + 000 + 00 + 01 + 00 + 00 + 000 + 0 + 0 + 1 + 0 + 00000 */
/* WDCR_EBC(pb5ap, 0x01010040) */
/*jsa recommendation: WDCR_EBC(pb5ap, 0x00010040) */
/* WDCR_EBC(pb5cr, 0X10018000) */
/* Access parms */
/* 100 3 8 0 0 0 */
/* 0x100 + 001 + 11 + 00 + 0 0000 0000 0000 = 0x10038000 */
/* Address : 0x10000000 */
/* Size: 2 MB */
/* Usage: read/write */
/* Width: 32 bit */
/* For Genie onboard fpga 32 bit interface */
/* 0 1 0 1 0 0 0 0 */
/* 0 + 00000 + 010 + 000 + 00 + 01 + 00 + 00 + 000 + 0 + 0 + 0 + 0 + 00000 */
/* 0x01010000 */
/* Access parms */
/* 102 1 c 0 0 0 */
/* 0x102 + 000 + 11 + 10 + 0 0000 0000 0000 = 0x1021c000 */
/* Address : 0x10200000 */
/* Size: 2 MB */
/* Usage: read/write */
/* Width: 32 bit */
/* Walnut fpga pb7ap */
/* 0 1 8 1 5 2 8 0 */
/* 0 + 00000 + 011 + 000 + 00 + 01 + 01 + 01 + 001 + 0 + 1 + 0 + 0 + 00000 */
/* Walnut fpga pb7cr */
/* 0xF0318000 */
/* */