u-boot/arch/arm/dts/mvebu-u-boot.dtsi

#include <config.h>

#ifdef CONFIG_ARMADA_32BIT

/ {
	soc {
		u-boot,dm-pre-reloc;
		internal-regs {
			u-boot,dm-pre-reloc;
		};
	};
};

&uart0 {
	u-boot,dm-pre-reloc;
};

#ifdef CONFIG_ARMADA_375
/* Armada 375 has multiple timers, use timer1 here */
&timer1 {
	u-boot,dm-pre-reloc;
};
#else
&timer {
	u-boot,dm-pre-reloc;
};
#endif

#ifdef CONFIG_SPL_SPI
&spi0 {
	u-boot,dm-pre-reloc;
};
#endif

#endif
arm: mvebu: Introduce mvebu-u-boot.dtsi for 32-bit Armada SoCs Set u-boot,dm-pre-reloc for /soc/, /soc/internal-regs/ and &uart0 nodes as it is required on every 32-bit Armada SoCs. And set also u-boot,dm-pre-reloc for &spi0 when going to boot from SPI because otherwise SPL SPI drivers do not load. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de> Tested-by: Stefan Roese <sr@denx.de> 2022-08-03 11:00:50 +00:00			`#include <config.h>`

			`#ifdef CONFIG_ARMADA_32BIT`

			`/ {`
			`soc {`
			`u-boot,dm-pre-reloc;`
			`internal-regs {`
			`u-boot,dm-pre-reloc;`
			`};`
			`};`
			`};`

			`&uart0 {`
			`u-boot,dm-pre-reloc;`
			`};`

arm: mvebu: dts: mvebu-u-boot.dtsi: Add "u-boot, dm-pre-reloc" to timer DT node Adding the "u-boot,dm-pre-reloc" DT property to the timer node is necesssary to support the timer in the early boot phases (e.g. SPL & pre-reloc). Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Tony Dinh <mibodhi@gmail.com> 2022-09-15 14:20:42 +00:00			`#ifdef CONFIG_ARMADA_375`
			`/* Armada 375 has multiple timers, use timer1 here */`
			`&timer1 {`
			`u-boot,dm-pre-reloc;`
			`};`
			`#else`
			`&timer {`
			`u-boot,dm-pre-reloc;`
			`};`
			`#endif`

arm: mvebu: Introduce mvebu-u-boot.dtsi for 32-bit Armada SoCs Set u-boot,dm-pre-reloc for /soc/, /soc/internal-regs/ and &uart0 nodes as it is required on every 32-bit Armada SoCs. And set also u-boot,dm-pre-reloc for &spi0 when going to boot from SPI because otherwise SPL SPI drivers do not load. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de> Tested-by: Stefan Roese <sr@denx.de> 2022-08-03 11:00:50 +00:00			`#ifdef CONFIG_SPL_SPI`
			`&spi0 {`
			`u-boot,dm-pre-reloc;`
			`};`
			`#endif`

			`#endif`