mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 17:07:38 +00:00
794 lines
19 KiB
Text
794 lines
19 KiB
Text
|
/*
|
||
|
* Copyright 2017 Gateworks Corporation
|
||
|
*
|
||
|
* This file is dual-licensed: you can use it either under the terms
|
||
|
* of the GPL or the X11 license, at your option. Note that this dual
|
||
|
* licensing only applies to this file, and not this project as a
|
||
|
* whole.
|
||
|
*
|
||
|
* a) This file is free software; you can redistribute it and/or
|
||
|
* modify it under the terms of the GNU General Public License as
|
||
|
* published by the Free Software Foundation; either version 2 of
|
||
|
* the License, or (at your option) any later version.
|
||
|
*
|
||
|
* This file is distributed in the hope that it will be useful,
|
||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
|
* GNU General Public License for more details.
|
||
|
*
|
||
|
* You should have received a copy of the GNU General Public
|
||
|
* License along with this file; if not, write to the Free
|
||
|
* Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
|
||
|
* MA 02110-1301 USA
|
||
|
*
|
||
|
* Or, alternatively,
|
||
|
*
|
||
|
* b) Permission is hereby granted, free of charge, to any person
|
||
|
* obtaining a copy of this software and associated documentation
|
||
|
* files (the "Software"), to deal in the Software without
|
||
|
* restriction, including without limitation the rights to use,
|
||
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||
|
* sell copies of the Software, and to permit persons to whom the
|
||
|
* Software is furnished to do so, subject to the following
|
||
|
* conditions:
|
||
|
*
|
||
|
* The above copyright notice and this permission notice shall be
|
||
|
* included in all copies or substantial portions of the Software.
|
||
|
*
|
||
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||
|
* OTHER DEALINGS IN THE SOFTWARE.
|
||
|
*/
|
||
|
|
||
|
#include <dt-bindings/gpio/gpio.h>
|
||
|
#include <dt-bindings/input/linux-event-codes.h>
|
||
|
#include <dt-bindings/interrupt-controller/irq.h>
|
||
|
|
||
|
/ {
|
||
|
chosen {
|
||
|
stdout-path = &uart2;
|
||
|
};
|
||
|
|
||
|
backlight {
|
||
|
compatible = "pwm-backlight";
|
||
|
pwms = <&pwm1 0 5000000>;
|
||
|
brightness-levels = <
|
||
|
0 1 2 3 4 5 6 7 8 9
|
||
|
10 11 12 13 14 15 16 17 18 19
|
||
|
20 21 22 23 24 25 26 27 28 29
|
||
|
30 31 32 33 34 35 36 37 38 39
|
||
|
40 41 42 43 44 45 46 47 48 49
|
||
|
50 51 52 53 54 55 56 57 58 59
|
||
|
60 61 62 63 64 65 66 67 68 69
|
||
|
70 71 72 73 74 75 76 77 78 79
|
||
|
80 81 82 83 84 85 86 87 88 89
|
||
|
90 91 92 93 94 95 96 97 98 99
|
||
|
100
|
||
|
>;
|
||
|
default-brightness-level = <100>;
|
||
|
};
|
||
|
|
||
|
gpio-keys {
|
||
|
compatible = "gpio-keys";
|
||
|
|
||
|
user-pb {
|
||
|
label = "user_pb";
|
||
|
gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
|
||
|
linux,code = <BTN_0>;
|
||
|
};
|
||
|
|
||
|
user-pb1x {
|
||
|
label = "user_pb1x";
|
||
|
linux,code = <BTN_1>;
|
||
|
interrupt-parent = <&gsc>;
|
||
|
interrupts = <0>;
|
||
|
};
|
||
|
|
||
|
key-erased {
|
||
|
label = "key-erased";
|
||
|
linux,code = <BTN_2>;
|
||
|
interrupt-parent = <&gsc>;
|
||
|
interrupts = <1>;
|
||
|
};
|
||
|
|
||
|
eeprom-wp {
|
||
|
label = "eeprom_wp";
|
||
|
linux,code = <BTN_3>;
|
||
|
interrupt-parent = <&gsc>;
|
||
|
interrupts = <2>;
|
||
|
};
|
||
|
|
||
|
tamper {
|
||
|
label = "tamper";
|
||
|
linux,code = <BTN_4>;
|
||
|
interrupt-parent = <&gsc>;
|
||
|
interrupts = <5>;
|
||
|
};
|
||
|
|
||
|
switch-hold {
|
||
|
label = "switch_hold";
|
||
|
linux,code = <BTN_5>;
|
||
|
interrupt-parent = <&gsc>;
|
||
|
interrupts = <7>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
leds {
|
||
|
compatible = "gpio-leds";
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_gpio_leds>;
|
||
|
|
||
|
led0: user1 {
|
||
|
label = "user1";
|
||
|
gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
|
||
|
default-state = "off";
|
||
|
};
|
||
|
};
|
||
|
|
||
|
memory@10000000 {
|
||
|
device_type = "memory";
|
||
|
reg = <0x10000000 0x40000000>;
|
||
|
};
|
||
|
|
||
|
reg_5p0v: regulator-5p0v {
|
||
|
compatible = "regulator-fixed";
|
||
|
regulator-name = "5P0V";
|
||
|
regulator-min-microvolt = <5000000>;
|
||
|
regulator-max-microvolt = <5000000>;
|
||
|
regulator-always-on;
|
||
|
};
|
||
|
|
||
|
reg_3p3v: regulator-3p3v {
|
||
|
compatible = "regulator-fixed";
|
||
|
regulator-name = "3P3V";
|
||
|
regulator-min-microvolt = <3300000>;
|
||
|
regulator-max-microvolt = <3300000>;
|
||
|
regulator-always-on;
|
||
|
};
|
||
|
|
||
|
reg_2p5v: regulator-2p5v {
|
||
|
compatible = "regulator-fixed";
|
||
|
regulator-name = "2P5V";
|
||
|
regulator-min-microvolt = <2500000>;
|
||
|
regulator-max-microvolt = <2500000>;
|
||
|
regulator-always-on;
|
||
|
};
|
||
|
|
||
|
reg_usb_h1_vbus: regulator-usb-h1-vbus {
|
||
|
compatible = "regulator-fixed";
|
||
|
regulator-name = "usb_h1_vbus";
|
||
|
regulator-min-microvolt = <5000000>;
|
||
|
regulator-max-microvolt = <5000000>;
|
||
|
gpio = <&gpio3 30 0>;
|
||
|
enable-active-high;
|
||
|
};
|
||
|
|
||
|
reg_usb_otg_vbus: regulator-usb-otg-vbus {
|
||
|
compatible = "regulator-fixed";
|
||
|
regulator-name = "usb_otg_vbus";
|
||
|
regulator-min-microvolt = <5000000>;
|
||
|
regulator-max-microvolt = <5000000>;
|
||
|
gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
|
||
|
enable-active-high;
|
||
|
};
|
||
|
|
||
|
reg_12p0: regulator-12p0v {
|
||
|
compatible = "regulator-fixed";
|
||
|
regulator-name = "12P0V";
|
||
|
regulator-min-microvolt = <12000000>;
|
||
|
regulator-max-microvolt = <12000000>;
|
||
|
gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
|
||
|
enable-active-high;
|
||
|
};
|
||
|
|
||
|
sound {
|
||
|
compatible = "fsl,imx-audio-tlv320";
|
||
|
model = "imx-tlv320";
|
||
|
ssi-controller = <&ssi1>;
|
||
|
audio-codec = <&tlv320aic3105>;
|
||
|
/* routing of sink, source */
|
||
|
audio-routing =
|
||
|
/* TLV320 LINE1L pin <-> Mic Jack connector */
|
||
|
"LINE1L", "Mic Jack",
|
||
|
/* board Headphone Jack <-> HPOUT */
|
||
|
"Headphone Jack", "HPLOUT",
|
||
|
"Headphone Jack", "HPROUT",
|
||
|
"Mic Jack", "Mic Bias";
|
||
|
mux-int-port = <1>;
|
||
|
mux-ext-port = <6>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&audmux {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_audmux>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&clks {
|
||
|
assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
|
||
|
<&clks IMX6QDL_CLK_LDB_DI1_SEL>;
|
||
|
assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
|
||
|
<&clks IMX6QDL_CLK_PLL3_USB_OTG>;
|
||
|
};
|
||
|
|
||
|
&fec {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_enet>;
|
||
|
phy-mode = "rgmii-id";
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&i2c1 {
|
||
|
clock-frequency = <100000>;
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_i2c1>;
|
||
|
status = "okay";
|
||
|
|
||
|
gsc: gsc@20 {
|
||
|
compatible = "gw,gsc";
|
||
|
reg = <0x20>;
|
||
|
interrupt-parent = <&gpio1>;
|
||
|
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
|
||
|
interrupt-controller;
|
||
|
#interrupt-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
|
||
|
adc {
|
||
|
compatible = "gw,gsc-adc";
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
|
||
|
channel@0 {
|
||
|
gw,mode = <0>;
|
||
|
reg = <0x00>;
|
||
|
label = "temp";
|
||
|
};
|
||
|
|
||
|
channel@2 {
|
||
|
gw,mode = <1>;
|
||
|
reg = <0x02>;
|
||
|
label = "vdd_vin";
|
||
|
};
|
||
|
|
||
|
channel@5 {
|
||
|
gw,mode = <1>;
|
||
|
reg = <0x05>;
|
||
|
label = "vdd_3p3";
|
||
|
};
|
||
|
|
||
|
channel@8 {
|
||
|
gw,mode = <1>;
|
||
|
reg = <0x08>;
|
||
|
label = "vdd_bat";
|
||
|
};
|
||
|
|
||
|
channel@b {
|
||
|
gw,mode = <1>;
|
||
|
reg = <0x0b>;
|
||
|
label = "vdd_5p0";
|
||
|
};
|
||
|
|
||
|
channel@e {
|
||
|
gw,mode = <1>;
|
||
|
reg = <0xe>;
|
||
|
label = "vdd_arm";
|
||
|
};
|
||
|
|
||
|
channel@11 {
|
||
|
gw,mode = <1>;
|
||
|
reg = <0x11>;
|
||
|
label = "vdd_soc";
|
||
|
};
|
||
|
|
||
|
channel@14 {
|
||
|
gw,mode = <1>;
|
||
|
reg = <0x14>;
|
||
|
label = "vdd_3p0";
|
||
|
};
|
||
|
|
||
|
channel@17 {
|
||
|
gw,mode = <1>;
|
||
|
reg = <0x17>;
|
||
|
label = "vdd_1p5";
|
||
|
};
|
||
|
|
||
|
channel@1d {
|
||
|
gw,mode = <1>;
|
||
|
reg = <0x1d>;
|
||
|
label = "vdd_1p8";
|
||
|
};
|
||
|
|
||
|
channel@20 {
|
||
|
gw,mode = <1>;
|
||
|
reg = <0x20>;
|
||
|
label = "vdd_an1";
|
||
|
};
|
||
|
|
||
|
channel@23 {
|
||
|
gw,mode = <1>;
|
||
|
reg = <0x23>;
|
||
|
label = "vdd_2p5";
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
|
||
|
gsc_gpio: gpio@23 {
|
||
|
compatible = "nxp,pca9555";
|
||
|
reg = <0x23>;
|
||
|
gpio-controller;
|
||
|
#gpio-cells = <2>;
|
||
|
interrupt-parent = <&gsc>;
|
||
|
interrupts = <4>;
|
||
|
};
|
||
|
|
||
|
eeprom1: eeprom@50 {
|
||
|
compatible = "atmel,24c02";
|
||
|
reg = <0x50>;
|
||
|
pagesize = <16>;
|
||
|
};
|
||
|
|
||
|
eeprom2: eeprom@51 {
|
||
|
compatible = "atmel,24c02";
|
||
|
reg = <0x51>;
|
||
|
pagesize = <16>;
|
||
|
};
|
||
|
|
||
|
eeprom3: eeprom@52 {
|
||
|
compatible = "atmel,24c02";
|
||
|
reg = <0x52>;
|
||
|
pagesize = <16>;
|
||
|
};
|
||
|
|
||
|
eeprom4: eeprom@53 {
|
||
|
compatible = "atmel,24c02";
|
||
|
reg = <0x53>;
|
||
|
pagesize = <16>;
|
||
|
};
|
||
|
|
||
|
dts1672: rtc@68 {
|
||
|
compatible = "dallas,ds1672";
|
||
|
reg = <0x68>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&i2c2 {
|
||
|
clock-frequency = <400000>;
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_i2c2>;
|
||
|
status = "okay";
|
||
|
|
||
|
ltc3676: pmic@3c {
|
||
|
compatible = "lltc,ltc3676";
|
||
|
reg = <0x3c>;
|
||
|
interrupt-parent = <&gpio1>;
|
||
|
interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
|
||
|
|
||
|
regulators {
|
||
|
/* VDD_1P8 (1+R1/R2 = 2.505): Aud/eMMC/microSD/Touch */
|
||
|
reg_1p8v: sw1 {
|
||
|
regulator-name = "vdd1p8";
|
||
|
regulator-min-microvolt = <1033310>;
|
||
|
regulator-max-microvolt = <2004000>;
|
||
|
lltc,fb-voltage-divider = <301000 200000>;
|
||
|
regulator-ramp-delay = <7000>;
|
||
|
regulator-boot-on;
|
||
|
regulator-always-on;
|
||
|
};
|
||
|
|
||
|
/* VDD_DDR (1+R1/R2 = 2.105) */
|
||
|
reg_vdd_ddr: sw2 {
|
||
|
regulator-name = "vddddr";
|
||
|
regulator-min-microvolt = <868310>;
|
||
|
regulator-max-microvolt = <1684000>;
|
||
|
lltc,fb-voltage-divider = <221000 200000>;
|
||
|
regulator-ramp-delay = <7000>;
|
||
|
regulator-boot-on;
|
||
|
regulator-always-on;
|
||
|
};
|
||
|
|
||
|
/* VDD_ARM (1+R1/R2 = 1.635) */
|
||
|
reg_vdd_arm: sw3 {
|
||
|
regulator-name = "vddarm";
|
||
|
regulator-min-microvolt = <674400>;
|
||
|
regulator-max-microvolt = <1308000>;
|
||
|
lltc,fb-voltage-divider = <127000 200000>;
|
||
|
regulator-ramp-delay = <7000>;
|
||
|
regulator-boot-on;
|
||
|
regulator-always-on;
|
||
|
linux,phandle = <®_vdd_arm>;
|
||
|
};
|
||
|
|
||
|
/* VDD_SOC (1+R1/R2 = 1.635) */
|
||
|
reg_vdd_soc: sw4 {
|
||
|
regulator-name = "vddsoc";
|
||
|
regulator-min-microvolt = <674400>;
|
||
|
regulator-max-microvolt = <1308000>;
|
||
|
lltc,fb-voltage-divider = <127000 200000>;
|
||
|
regulator-ramp-delay = <7000>;
|
||
|
regulator-boot-on;
|
||
|
regulator-always-on;
|
||
|
linux,phandle = <®_vdd_soc>;
|
||
|
};
|
||
|
|
||
|
/* VDD_1P0 (1+R1/R2 = 1.38): */
|
||
|
reg_1p0v: ldo2 {
|
||
|
regulator-name = "vdd1p0";
|
||
|
regulator-min-microvolt = <1002777>;
|
||
|
regulator-max-microvolt = <1002777>;
|
||
|
lltc,fb-voltage-divider = <100000 261000>;
|
||
|
regulator-boot-on;
|
||
|
regulator-always-on;
|
||
|
};
|
||
|
|
||
|
/* VDD_HIGH (1+R1/R2 = 4.17) */
|
||
|
reg_3p0v: ldo4 {
|
||
|
regulator-name = "vdd3p0";
|
||
|
regulator-min-microvolt = <3023250>;
|
||
|
regulator-max-microvolt = <3023250>;
|
||
|
lltc,fb-voltage-divider = <634000 200000>;
|
||
|
regulator-boot-on;
|
||
|
regulator-always-on;
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&i2c3 {
|
||
|
clock-frequency = <400000>;
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_i2c3>;
|
||
|
status = "okay";
|
||
|
|
||
|
tlv320aic3105: codec@18 {
|
||
|
compatible = "ti,tlv320aic3x";
|
||
|
reg = <0x18>;
|
||
|
reset-gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
|
||
|
clocks = <&clks IMX6QDL_CLK_CKO>;
|
||
|
ai3x-micbias-vg = <2>; /* MICBIAS_2_5V */
|
||
|
/* Regulators */
|
||
|
DRVDD-supply = <®_3p3v>;
|
||
|
AVDD-supply = <®_3p3v>;
|
||
|
IOVDD-supply = <®_3p3v>;
|
||
|
DVDD-supply = <®_1p8v>;
|
||
|
};
|
||
|
|
||
|
accelerometer@1d {
|
||
|
compatible = "fsl,mma8451";
|
||
|
reg = <0x1d>;
|
||
|
interrupt-parent = <&gpio7>;
|
||
|
interrupts = <11 IRQ_TYPE_EDGE_RISING>;
|
||
|
interrupt-names = "INT2";
|
||
|
};
|
||
|
|
||
|
/* headphone detect */
|
||
|
ts3a227e@3b {
|
||
|
compatible = "ti,ts3a227e";
|
||
|
reg = <0x3b>;
|
||
|
interrupt-parent = <&gpio5>;
|
||
|
interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
|
||
|
ti,micbias = <4>; /* 2.5V micbias */
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&ldb {
|
||
|
status = "okay";
|
||
|
|
||
|
lvds-channel@0 {
|
||
|
fsl,data-mapping = "spwg";
|
||
|
fsl,data-width = <18>;
|
||
|
status = "okay";
|
||
|
|
||
|
display-timings {
|
||
|
native-mode = <&timing0>;
|
||
|
timing0: g101evn010 {
|
||
|
clock-frequency = <68930000>;
|
||
|
hactive = <1280>;
|
||
|
vactive = <800>;
|
||
|
hback-porch = <220>;
|
||
|
hfront-porch = <40>;
|
||
|
vback-porch = <21>;
|
||
|
vfront-porch = <7>;
|
||
|
hsync-len = <60>;
|
||
|
vsync-len = <10>;
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&pwm1 {
|
||
|
#pwm-cells = <2>;
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_pwm1>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&ssi1 {
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&uart1 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_uart1>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&uart2 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_uart2>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&usbotg {
|
||
|
vbus-supply = <®_usb_otg_vbus>;
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_usbotg>;
|
||
|
disable-over-current;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&usbh1 {
|
||
|
vbus-supply = <®_usb_h1_vbus>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&usdhc1 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_usdhc1_200mhz>;
|
||
|
vmmc-supply = <®_3p3v>;
|
||
|
non-removable;
|
||
|
bus-width = <4>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&usdhc2 {
|
||
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
||
|
pinctrl-0 = <&pinctrl_usdhc2>;
|
||
|
pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
|
||
|
pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
|
||
|
cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
|
||
|
vmmc-supply = <®_3p3v>;
|
||
|
max-frequency = <100000000>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&usdhc3 {
|
||
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
||
|
pinctrl-0 = <&pinctrl_usdhc3>;
|
||
|
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
|
||
|
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
|
||
|
non-removable;
|
||
|
vmmc-supply = <®_3p3v>;
|
||
|
keep-power-in-suspend;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&wdog1 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_wdog>;
|
||
|
fsl,ext-reset-output;
|
||
|
};
|
||
|
|
||
|
&iomuxc {
|
||
|
pinctrl_audmux: audmuxgrp {
|
||
|
fsl,pins = <
|
||
|
MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x130b0
|
||
|
MX6QDL_PAD_DI0_PIN3__AUD6_TXFS 0x130b0
|
||
|
MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x130b0
|
||
|
MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x130b0
|
||
|
MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* MCK */
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_enet: enetgrp {
|
||
|
fsl,pins = <
|
||
|
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
|
||
|
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
|
||
|
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
|
||
|
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
|
||
|
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
|
||
|
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
|
||
|
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
|
||
|
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
|
||
|
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
|
||
|
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
|
||
|
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
|
||
|
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
|
||
|
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
|
||
|
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
|
||
|
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
|
||
|
MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x4001b0b0 /* PHY_RST# */
|
||
|
MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x4001b0b0 /* PHY_EN */
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_gpio_leds: gpioledsgrp {
|
||
|
fsl,pins = <
|
||
|
MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_i2c1: i2c1grp {
|
||
|
fsl,pins = <
|
||
|
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
|
||
|
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
|
||
|
MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 /* GSC_IRQ# */
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_i2c2: i2c2grp {
|
||
|
fsl,pins = <
|
||
|
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
|
||
|
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
|
||
|
MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_i2c3: i2c3grp {
|
||
|
fsl,pins = <
|
||
|
/* I2C3 */
|
||
|
MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
|
||
|
MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
|
||
|
|
||
|
/* Headphone Detect */
|
||
|
MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x0001b0b0 /* HPDET_IRQ# */
|
||
|
MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x0001b0b0 /* HPDET_MIC# */
|
||
|
|
||
|
/* Codec */
|
||
|
MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x0001b0b0 /* CODEC_RST# */
|
||
|
|
||
|
/* Touch Controller */
|
||
|
MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x0001b0b0 /* TOUCH_IRQ# */
|
||
|
MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x0001b0b0 /* TOUCH_RST */
|
||
|
|
||
|
/* Stow Sensor */
|
||
|
MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x0001b0b0 /* ACCEL_IRQ2 */
|
||
|
MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x0001b0b0 /* ACCEL_IRQ1 */
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_pwm1: pwm1grp {
|
||
|
fsl,pins = <
|
||
|
MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_uart1: uart1grp {
|
||
|
fsl,pins = <
|
||
|
MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
|
||
|
MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
|
||
|
MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30 0x1b0b1 /* TXEN */
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_uart2: uart2grp {
|
||
|
fsl,pins = <
|
||
|
MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
|
||
|
MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_usbotg: usbotggrp {
|
||
|
fsl,pins = <
|
||
|
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059
|
||
|
MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x4001b0b0 /* PWR_EN */
|
||
|
MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* OC */
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
|
||
|
fsl,pins = <
|
||
|
MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x4001b0b0 /* EMMY_EN */
|
||
|
MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x4001b0b0 /* EMMY_CFG1# */
|
||
|
MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x4001b0b0 /* EMMY_CFG2# */
|
||
|
MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x0001b0b0 /* EMMY_BTWAKE# */
|
||
|
MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x0001b0b0 /* EMMY_WFWAKE# */
|
||
|
|
||
|
MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9
|
||
|
MX6QDL_PAD_SD1_CMD__SD1_CMD 0x100f9
|
||
|
MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9
|
||
|
MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9
|
||
|
MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9
|
||
|
MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_usdhc2: usdhc2grp {
|
||
|
fsl,pins = <
|
||
|
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
|
||
|
MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
|
||
|
MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
|
||
|
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
|
||
|
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
|
||
|
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
|
||
|
MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x17059 /* CD */
|
||
|
MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x17059
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
|
||
|
fsl,pins = <
|
||
|
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9
|
||
|
MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9
|
||
|
MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
|
||
|
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
|
||
|
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
|
||
|
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9
|
||
|
MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x170b9 /* CD */
|
||
|
MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x170b9
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
|
||
|
fsl,pins = <
|
||
|
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9
|
||
|
MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9
|
||
|
MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9
|
||
|
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9
|
||
|
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9
|
||
|
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170f9
|
||
|
MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x170f9 /* CD */
|
||
|
MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x170f9
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_usdhc3: usdhc3grp {
|
||
|
fsl,pins = <
|
||
|
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
|
||
|
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
|
||
|
MX6QDL_PAD_SD3_RST__SD3_RESET 0x10059
|
||
|
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
|
||
|
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
|
||
|
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
|
||
|
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
|
||
|
MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
|
||
|
MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
|
||
|
MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
|
||
|
MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
|
||
|
fsl,pins = <
|
||
|
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
|
||
|
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
|
||
|
MX6QDL_PAD_SD3_RST__SD3_RESET 0x100b9
|
||
|
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
|
||
|
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
|
||
|
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
|
||
|
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
|
||
|
MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9
|
||
|
MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9
|
||
|
MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9
|
||
|
MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
|
||
|
fsl,pins = <
|
||
|
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
|
||
|
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
|
||
|
MX6QDL_PAD_SD3_RST__SD3_RESET 0x100f9
|
||
|
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
|
||
|
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
|
||
|
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
|
||
|
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
|
||
|
MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9
|
||
|
MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9
|
||
|
MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9
|
||
|
MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_wdog: wdoggrp {
|
||
|
fsl,pins = <
|
||
|
MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
|
||
|
>;
|
||
|
};
|
||
|
};
|