2011-01-21 08:31:21 +00:00
|
|
|
/*
|
|
|
|
|
* (C) Copyright 2010
|
|
|
|
|
* Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
|
|
|
|
|
*
|
2013-10-07 11:07:26 +00:00
|
|
|
* SPDX-License-Identifier: GPL-2.0+
|
2011-01-21 08:31:21 +00:00
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#ifndef __CONFIG_H
|
|
|
|
|
#define __CONFIG_H
|
|
|
|
|
|
|
|
|
|
#define CONFIG_405EP 1 /* this is a PPC405 CPU */
|
|
|
|
|
#define CONFIG_DLVISION_10G 1 /* on a DLVision-10G board */
|
|
|
|
|
|
|
|
|
|
#define CONFIG_SYS_TEXT_BASE 0xFFFC0000
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Include common defines/options for all AMCC eval boards
|
|
|
|
|
*/
|
|
|
|
|
#define CONFIG_HOSTNAME dlvsion-10g
|
|
|
|
|
#include "amcc-common.h"
|
|
|
|
|
|
2012-04-26 03:54:22 +00:00
|
|
|
#define CONFIG_BOARD_EARLY_INIT_R
|
2012-04-26 03:54:23 +00:00
|
|
|
#define CONFIG_MISC_INIT_R
|
2011-01-21 08:31:21 +00:00
|
|
|
#define CONFIG_LAST_STAGE_INIT
|
|
|
|
|
|
|
|
|
|
#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Configure PLL
|
|
|
|
|
*/
|
|
|
|
|
#define PLLMR0_DEFAULT PLLMR0_266_133_66
|
|
|
|
|
#define PLLMR1_DEFAULT PLLMR1_266_133_66
|
|
|
|
|
|
|
|
|
|
/* new uImage format support */
|
2014-07-03 07:28:26 +00:00
|
|
|
#define CONFIG_FIT_DISABLE_SHA256
|
2011-01-21 08:31:21 +00:00
|
|
|
|
|
|
|
|
#define CONFIG_ENV_IS_IN_FLASH /* use FLASH for environment vars */
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Default environment variables
|
|
|
|
|
*/
|
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
|
|
|
CONFIG_AMCC_DEF_ENV \
|
|
|
|
|
CONFIG_AMCC_DEF_ENV_POWERPC \
|
|
|
|
|
CONFIG_AMCC_DEF_ENV_NOR_UPD \
|
|
|
|
|
"kernel_addr=fc000000\0" \
|
|
|
|
|
"fdt_addr=fc1e0000\0" \
|
|
|
|
|
"ramdisk_addr=fc200000\0" \
|
|
|
|
|
""
|
|
|
|
|
|
|
|
|
|
#define CONFIG_PHY_ADDR 4 /* PHY address */
|
|
|
|
|
#define CONFIG_HAS_ETH0
|
|
|
|
|
#define CONFIG_HAS_ETH1
|
|
|
|
|
#define CONFIG_PHY1_ADDR 0xc /* EMAC1 PHY address */
|
|
|
|
|
#define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Commands additional to the ones defined in amcc-common.h
|
|
|
|
|
*/
|
2012-04-26 03:54:23 +00:00
|
|
|
#define CONFIG_CMD_DTT
|
2014-07-03 07:28:25 +00:00
|
|
|
#undef CONFIG_CMD_DIAG
|
2011-01-21 08:31:21 +00:00
|
|
|
#undef CONFIG_CMD_EEPROM
|
2014-07-03 07:28:25 +00:00
|
|
|
#undef CONFIG_CMD_IRQ
|
2011-01-21 08:31:21 +00:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* SDRAM configuration (please see cpu/ppc/sdram.[ch])
|
|
|
|
|
*/
|
|
|
|
|
#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
|
|
|
|
|
|
|
|
|
|
/* SDRAM timings used in datasheet */
|
|
|
|
|
#define CONFIG_SYS_SDRAM_CL 3 /* CAS latency */
|
|
|
|
|
#define CONFIG_SYS_SDRAM_tRP 20 /* PRECHARGE command period */
|
|
|
|
|
#define CONFIG_SYS_SDRAM_tRC 66 /* ACTIVE-to-ACTIVE period */
|
|
|
|
|
#define CONFIG_SYS_SDRAM_tRCD 20 /* ACTIVE-to-READ delay */
|
|
|
|
|
#define CONFIG_SYS_SDRAM_tRFC 66 /* Auto refresh period */
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* If CONFIG_SYS_EXT_SERIAL_CLOCK, then the UART divisor is 1.
|
|
|
|
|
* If CONFIG_SYS_405_UART_ERRATA_59, then UART divisor is 31.
|
|
|
|
|
* Otherwise, UART divisor is determined by CPU Clock and CONFIG_SYS_BASE_BAUD.
|
|
|
|
|
* The Linux BASE_BAUD define should match this configuration.
|
|
|
|
|
* baseBaud = cpuClock/(uartDivisor*16)
|
|
|
|
|
* If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock,
|
|
|
|
|
* set Linux BASE_BAUD to 403200.
|
|
|
|
|
*/
|
|
|
|
|
#define CONFIG_CONS_INDEX 1 /* Use UART0 */
|
|
|
|
|
#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* external serial clock */
|
|
|
|
|
#undef CONFIG_SYS_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */
|
|
|
|
|
#define CONFIG_SYS_BASE_BAUD 691200
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* I2C stuff
|
|
|
|
|
*/
|
2014-07-03 07:28:19 +00:00
|
|
|
#define CONFIG_SYS_I2C_PPC4XX
|
|
|
|
|
#define CONFIG_SYS_I2C_PPC4XX_CH0
|
2013-04-25 02:40:01 +00:00
|
|
|
#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 100000
|
2014-07-03 07:28:19 +00:00
|
|
|
#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F
|
2011-01-21 08:31:21 +00:00
|
|
|
|
2014-07-03 07:28:18 +00:00
|
|
|
#define CONFIG_SYS_I2C_IHS
|
2015-10-28 10:46:28 +00:00
|
|
|
#define CONFIG_SYS_I2C_IHS_DUAL
|
2014-07-03 07:28:18 +00:00
|
|
|
#define CONFIG_SYS_I2C_IHS_CH0
|
|
|
|
|
#define CONFIG_SYS_I2C_IHS_SPEED_0 50000
|
|
|
|
|
#define CONFIG_SYS_I2C_IHS_SLAVE_0 0x7F
|
2015-10-28 10:46:28 +00:00
|
|
|
#define CONFIG_SYS_I2C_IHS_SPEED_0_1 50000
|
|
|
|
|
#define CONFIG_SYS_I2C_IHS_SLAVE_0_1 0x7F
|
2014-07-03 07:28:18 +00:00
|
|
|
#define CONFIG_SYS_I2C_IHS_CH1
|
|
|
|
|
#define CONFIG_SYS_I2C_IHS_SPEED_1 50000
|
|
|
|
|
#define CONFIG_SYS_I2C_IHS_SLAVE_1 0x7F
|
2015-10-28 10:46:28 +00:00
|
|
|
#define CONFIG_SYS_I2C_IHS_SPEED_1_1 50000
|
|
|
|
|
#define CONFIG_SYS_I2C_IHS_SLAVE_1_1 0x7F
|
2014-07-03 07:28:18 +00:00
|
|
|
|
2015-10-28 10:46:28 +00:00
|
|
|
#define CONFIG_SYS_SPD_BUS_NUM 4
|
2014-07-03 07:28:18 +00:00
|
|
|
|
2011-01-21 08:31:21 +00:00
|
|
|
/* Temp sensor/hwmon/dtt */
|
2015-10-28 10:46:28 +00:00
|
|
|
#define CONFIG_SYS_DTT_BUS_NUM 4
|
2011-01-21 08:31:21 +00:00
|
|
|
#define CONFIG_DTT_LM63 1 /* National LM63 */
|
2012-04-26 03:54:24 +00:00
|
|
|
#define CONFIG_DTT_SENSORS { 0x4c, 0x4e, 0x18 } /* Sensor addresses */
|
2011-01-21 08:31:21 +00:00
|
|
|
#define CONFIG_DTT_PWM_LOOKUPTABLE \
|
2011-10-04 09:13:53 +00:00
|
|
|
{ { 46, 10 }, { 48, 14 }, { 50, 19 }, { 52, 23 },\
|
|
|
|
|
{ 54, 27 }, { 56, 31 }, { 58, 36 }, { 60, 40 } }
|
2011-01-21 08:31:21 +00:00
|
|
|
#define CONFIG_DTT_TACH_LIMIT 0xa10
|
|
|
|
|
|
2015-10-28 10:46:28 +00:00
|
|
|
#define CONFIG_SYS_ICS8N3QV01_I2C {1, 3}
|
|
|
|
|
#define CONFIG_SYS_SIL1178_I2C {0, 2}
|
|
|
|
|
#define CONFIG_SYS_DP501_I2C {0, 2}
|
2014-07-03 07:28:19 +00:00
|
|
|
|
2011-01-21 08:31:21 +00:00
|
|
|
/* EBC peripherals */
|
|
|
|
|
|
|
|
|
|
#define CONFIG_SYS_FLASH_BASE 0xFC000000
|
|
|
|
|
#define CONFIG_SYS_FPGA0_BASE 0x7f100000
|
|
|
|
|
#define CONFIG_SYS_FPGA1_BASE 0x7f200000
|
|
|
|
|
#define CONFIG_SYS_LATCH_BASE 0x7f300000
|
|
|
|
|
|
|
|
|
|
#define CONFIG_SYS_FPGA_BASE(k) \
|
|
|
|
|
(k ? CONFIG_SYS_FPGA1_BASE : CONFIG_SYS_FPGA0_BASE)
|
|
|
|
|
|
|
|
|
|
#define CONFIG_SYS_FPGA_DONE(k) \
|
|
|
|
|
(k ? 0x2000 : 0x1000)
|
|
|
|
|
|
|
|
|
|
#define CONFIG_SYS_FPGA_COUNT 2
|
|
|
|
|
|
2013-06-26 14:04:26 +00:00
|
|
|
#define CONFIG_SYS_FPGA_PTR { \
|
|
|
|
|
(struct ihs_fpga *)CONFIG_SYS_FPGA0_BASE, \
|
|
|
|
|
(struct ihs_fpga *)CONFIG_SYS_FPGA1_BASE }
|
|
|
|
|
|
|
|
|
|
#define CONFIG_SYS_FPGA_COMMON
|
|
|
|
|
|
2011-01-21 08:31:21 +00:00
|
|
|
#define CONFIG_SYS_LATCH0_RESET 0xffff
|
|
|
|
|
#define CONFIG_SYS_LATCH0_BOOT 0xffff
|
2013-08-09 08:52:54 +00:00
|
|
|
#define CONFIG_SYS_LATCH1_RESET 0xffbf
|
2011-01-21 08:31:21 +00:00
|
|
|
#define CONFIG_SYS_LATCH1_BOOT 0xffff
|
|
|
|
|
|
2011-04-06 11:53:46 +00:00
|
|
|
#define CONFIG_SYS_FPGA_NO_RFL_HI
|
|
|
|
|
|
2011-01-21 08:31:21 +00:00
|
|
|
/*
|
|
|
|
|
* FLASH organization
|
|
|
|
|
*/
|
|
|
|
|
#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
|
|
|
|
|
#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
|
|
|
|
|
|
|
|
|
|
#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
|
|
|
|
|
|
|
|
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */
|
|
|
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sectors per chip*/
|
|
|
|
|
|
|
|
|
|
#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase/ms */
|
|
|
|
|
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write/ms */
|
|
|
|
|
|
|
|
|
|
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buff'd writes */
|
|
|
|
|
|
|
|
|
|
#define CONFIG_SYS_FLASH_EMPTY_INFO /* 'E' for empty sector on flinfo */
|
|
|
|
|
#define CONFIG_SYS_FLASH_QUIET_TEST 1 /* no warn upon unknown flash */
|
|
|
|
|
|
|
|
|
|
#ifdef CONFIG_ENV_IS_IN_FLASH
|
|
|
|
|
#define CONFIG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
|
|
|
|
|
#define CONFIG_ENV_ADDR ((-CONFIG_SYS_MONITOR_LEN)-CONFIG_ENV_SECT_SIZE)
|
|
|
|
|
#define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
|
|
|
|
|
|
|
|
|
|
/* Address and size of Redundant Environment Sector */
|
|
|
|
|
#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
|
|
|
|
|
#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* PPC405 GPIO Configuration
|
|
|
|
|
*/
|
|
|
|
|
#define CONFIG_SYS_4xx_GPIO_TABLE { /* GPIO Alternate1 */ \
|
|
|
|
|
{ \
|
|
|
|
|
/* GPIO Core 0 */ \
|
|
|
|
|
{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO0 PerBLast */ \
|
|
|
|
|
{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO1 TS1E */ \
|
|
|
|
|
{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO2 TS2E */ \
|
|
|
|
|
{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO3 TS1O */ \
|
|
|
|
|
{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO4 TS2O */ \
|
|
|
|
|
{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_1 }, /* GPIO5 TS3 */ \
|
|
|
|
|
{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO6 TS4 */ \
|
|
|
|
|
{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_1 }, /* GPIO7 TS5 */ \
|
|
|
|
|
{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO8 TS6 */ \
|
|
|
|
|
{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO9 TrcClk */ \
|
|
|
|
|
{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO10 PerCS1 */ \
|
|
|
|
|
{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO11 PerCS2 */ \
|
|
|
|
|
{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO12 PerCS3 */ \
|
|
|
|
|
{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO13 PerCS4 */ \
|
|
|
|
|
{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO14 PerAddr03 */ \
|
|
|
|
|
{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO15 PerAddr04 */ \
|
|
|
|
|
{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO16 PerAddr05 */ \
|
|
|
|
|
{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO17 IRQ0 */ \
|
|
|
|
|
{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO18 IRQ1 */ \
|
|
|
|
|
{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO19 IRQ2 */ \
|
|
|
|
|
{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO20 IRQ3 */ \
|
|
|
|
|
{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO21 IRQ4 */ \
|
|
|
|
|
{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO22 IRQ5 */ \
|
|
|
|
|
{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO23 IRQ6 */ \
|
|
|
|
|
{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO24 UART0_DCD */ \
|
|
|
|
|
{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO25 UART0_DSR */ \
|
|
|
|
|
{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO26 UART0_RI */ \
|
|
|
|
|
{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO27 UART0_DTR */ \
|
|
|
|
|
{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO28 UART1_Rx */ \
|
|
|
|
|
{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO29 UART1_Tx */ \
|
|
|
|
|
{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO30 RejectPkt0 */ \
|
|
|
|
|
{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO31 RejectPkt1 */ \
|
|
|
|
|
} \
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Definitions for initial stack pointer and data area (in data cache)
|
|
|
|
|
*/
|
|
|
|
|
/* use on chip memory (OCM) for temperary stack until sdram is tested */
|
|
|
|
|
#define CONFIG_SYS_TEMP_STACK_OCM 1
|
|
|
|
|
|
|
|
|
|
/* On Chip Memory location */
|
|
|
|
|
#define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000
|
|
|
|
|
#define CONFIG_SYS_OCM_DATA_SIZE 0x1000
|
|
|
|
|
#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* in SDRAM */
|
2016-04-06 20:22:10 +00:00
|
|
|
#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE
|
2011-01-21 08:31:21 +00:00
|
|
|
|
|
|
|
|
#define CONFIG_SYS_GBL_DATA_OFFSET \
|
2016-04-06 20:22:10 +00:00
|
|
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
2011-01-21 08:31:21 +00:00
|
|
|
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* External Bus Controller (EBC) Setup
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
/* Memory Bank 0 (NOR-flash) */
|
|
|
|
|
#define CONFIG_SYS_EBC_PB0AP (EBC_BXAP_BME_ENABLED | \
|
|
|
|
|
EBC_BXAP_FWT_ENCODE(8) | \
|
|
|
|
|
EBC_BXAP_BWT_ENCODE(7) | \
|
|
|
|
|
EBC_BXAP_BCE_DISABLE | \
|
|
|
|
|
EBC_BXAP_BCT_2TRANS | \
|
|
|
|
|
EBC_BXAP_CSN_ENCODE(0) | \
|
|
|
|
|
EBC_BXAP_OEN_ENCODE(2) | \
|
|
|
|
|
EBC_BXAP_WBN_ENCODE(2) | \
|
|
|
|
|
EBC_BXAP_WBF_ENCODE(2) | \
|
|
|
|
|
EBC_BXAP_TH_ENCODE(4) | \
|
|
|
|
|
EBC_BXAP_RE_DISABLED | \
|
|
|
|
|
EBC_BXAP_SOR_NONDELAYED | \
|
|
|
|
|
EBC_BXAP_BEM_WRITEONLY | \
|
|
|
|
|
EBC_BXAP_PEN_DISABLED)
|
|
|
|
|
#define CONFIG_SYS_EBC_PB0CR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FLASH_BASE) | \
|
|
|
|
|
EBC_BXCR_BS_64MB | \
|
|
|
|
|
EBC_BXCR_BU_RW | \
|
|
|
|
|
EBC_BXCR_BW_16BIT)
|
|
|
|
|
|
|
|
|
|
/* Memory Bank 1 (FPGA0) */
|
|
|
|
|
#define CONFIG_SYS_EBC_PB1AP (EBC_BXAP_BME_DISABLED | \
|
|
|
|
|
EBC_BXAP_TWT_ENCODE(5) | \
|
|
|
|
|
EBC_BXAP_BCE_DISABLE | \
|
|
|
|
|
EBC_BXAP_BCT_2TRANS | \
|
|
|
|
|
EBC_BXAP_CSN_ENCODE(0) | \
|
|
|
|
|
EBC_BXAP_OEN_ENCODE(2) | \
|
|
|
|
|
EBC_BXAP_WBN_ENCODE(1) | \
|
|
|
|
|
EBC_BXAP_WBF_ENCODE(1) | \
|
|
|
|
|
EBC_BXAP_TH_ENCODE(0) | \
|
|
|
|
|
EBC_BXAP_RE_DISABLED | \
|
|
|
|
|
EBC_BXAP_SOR_NONDELAYED | \
|
|
|
|
|
EBC_BXAP_BEM_WRITEONLY | \
|
|
|
|
|
EBC_BXAP_PEN_DISABLED)
|
|
|
|
|
#define CONFIG_SYS_EBC_PB1CR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FPGA0_BASE) | \
|
|
|
|
|
EBC_BXCR_BS_1MB | \
|
|
|
|
|
EBC_BXCR_BU_RW | \
|
|
|
|
|
EBC_BXCR_BW_16BIT)
|
|
|
|
|
|
|
|
|
|
/* Memory Bank 2 (FPGA1) */
|
|
|
|
|
#define CONFIG_SYS_EBC_PB2AP (EBC_BXAP_BME_DISABLED | \
|
|
|
|
|
EBC_BXAP_TWT_ENCODE(6) | \
|
|
|
|
|
EBC_BXAP_BCE_DISABLE | \
|
|
|
|
|
EBC_BXAP_BCT_2TRANS | \
|
|
|
|
|
EBC_BXAP_CSN_ENCODE(0) | \
|
|
|
|
|
EBC_BXAP_OEN_ENCODE(2) | \
|
|
|
|
|
EBC_BXAP_WBN_ENCODE(1) | \
|
|
|
|
|
EBC_BXAP_WBF_ENCODE(1) | \
|
|
|
|
|
EBC_BXAP_TH_ENCODE(0) | \
|
|
|
|
|
EBC_BXAP_RE_DISABLED | \
|
|
|
|
|
EBC_BXAP_SOR_NONDELAYED | \
|
|
|
|
|
EBC_BXAP_BEM_WRITEONLY | \
|
|
|
|
|
EBC_BXAP_PEN_DISABLED)
|
|
|
|
|
#define CONFIG_SYS_EBC_PB2CR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FPGA1_BASE) | \
|
|
|
|
|
EBC_BXCR_BS_1MB | \
|
|
|
|
|
EBC_BXCR_BU_RW | \
|
|
|
|
|
EBC_BXCR_BW_16BIT)
|
|
|
|
|
|
|
|
|
|
/* Memory Bank 3 (Latches) */
|
|
|
|
|
#define CONFIG_SYS_EBC_PB3AP (EBC_BXAP_BME_ENABLED | \
|
|
|
|
|
EBC_BXAP_FWT_ENCODE(8) | \
|
|
|
|
|
EBC_BXAP_BWT_ENCODE(4) | \
|
|
|
|
|
EBC_BXAP_BCE_DISABLE | \
|
|
|
|
|
EBC_BXAP_BCT_2TRANS | \
|
|
|
|
|
EBC_BXAP_CSN_ENCODE(0) | \
|
|
|
|
|
EBC_BXAP_OEN_ENCODE(1) | \
|
|
|
|
|
EBC_BXAP_WBN_ENCODE(1) | \
|
|
|
|
|
EBC_BXAP_WBF_ENCODE(1) | \
|
|
|
|
|
EBC_BXAP_TH_ENCODE(2) | \
|
|
|
|
|
EBC_BXAP_RE_DISABLED | \
|
|
|
|
|
EBC_BXAP_SOR_NONDELAYED | \
|
|
|
|
|
EBC_BXAP_BEM_WRITEONLY | \
|
|
|
|
|
EBC_BXAP_PEN_DISABLED)
|
|
|
|
|
#define CONFIG_SYS_EBC_PB3CR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_LATCH_BASE) | \
|
|
|
|
|
EBC_BXCR_BS_1MB | \
|
|
|
|
|
EBC_BXCR_BU_RW | \
|
|
|
|
|
EBC_BXCR_BW_16BIT)
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* OSD Setup
|
|
|
|
|
*/
|
2011-04-06 11:53:48 +00:00
|
|
|
#define CONFIG_SYS_MPC92469AC
|
2011-01-21 08:31:21 +00:00
|
|
|
#define CONFIG_SYS_OSD_SCREENS CONFIG_SYS_FPGA_COUNT
|
2015-10-28 10:46:28 +00:00
|
|
|
#define CONFIG_SYS_DP501_DIFFERENTIAL
|
|
|
|
|
#define CONFIG_SYS_DP501_VCAPCTRL0 0x01 /* DDR mode 0, DE for H/VSYNC */
|
2011-01-21 08:31:21 +00:00
|
|
|
|
|
|
|
|
#endif /* __CONFIG_H */
|
