u-boot/configs/lctech_pi_f1c200s_defconfig

CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
CONFIG_DEFAULT_DEVICE_TREE="suniv-f1c200s-lctech-pi"
CONFIG_SPL=y
CONFIG_MACH_SUNIV=y
CONFIG_DRAM_CLK=156
CONFIG_DRAM_ZQ=0
CONFIG_SUNXI_MINIMUM_DRAM_MB=64
# CONFIG_VIDEO_SUNXI is not set
CONFIG_MTD=y
CONFIG_CONS_INDEX=2
CONFIG_SPI=y
sunxi: defconfig: Add Lctech Pi F1C200s board The Lctech Pi F1C200s (also previously known under the Cherry Pi brand) is a small development board with the Allwinner F1C200s SoC. This is the same as the F1C100s, but with 64MB instead of 32MB co-packaged DRAM. Add a defconfig for this board, enabling the most basic features. This uses the new 64MB memory map, which avoids the very tight memory map we use for the 32MB F1C100s board(s). The devicetree file is already in the tree, courtesy of the previous Linux repo sync. Signed-off-by: Andre Przywara <andre.przywara@arm.com> 2023-04-11 22:56:14 +00:00			`CONFIG_ARM=y`
			`CONFIG_ARCH_SUNXI=y`
			`CONFIG_DEFAULT_DEVICE_TREE="suniv-f1c200s-lctech-pi"`
			`CONFIG_SPL=y`
			`CONFIG_MACH_SUNIV=y`
			`CONFIG_DRAM_CLK=156`
			`CONFIG_DRAM_ZQ=0`
			`CONFIG_SUNXI_MINIMUM_DRAM_MB=64`
			`# CONFIG_VIDEO_SUNXI is not set`
mtd: Make CONFIG_MTD be the gate symbol for the menu The help for CONFIG_MTD explains that it needs to be enabled for various things like NAND, etc to be available. It however then doesn't enforce this dependency and so if you have none of these systems present you still need to disable a number of options. Fix this by making places that select/imply one type of flash, but did not do the same, also do this for "MTD". Make boards which hadn't been enabling MTD already but need it now, do so. In a few places, disable CONFIG_CMD_MTDPARTS as it wasn't previously enabled but was now being implied. Signed-off-by: Tom Rini <trini@konsulko.com> 2024-01-10 18:46:10 +00:00			`CONFIG_MTD=y`
sunxi: defconfig: Add Lctech Pi F1C200s board The Lctech Pi F1C200s (also previously known under the Cherry Pi brand) is a small development board with the Allwinner F1C200s SoC. This is the same as the F1C100s, but with 64MB instead of 32MB co-packaged DRAM. Add a defconfig for this board, enabling the most basic features. This uses the new 64MB memory map, which avoids the very tight memory map we use for the 32MB F1C100s board(s). The devicetree file is already in the tree, courtesy of the previous Linux repo sync. Signed-off-by: Andre Przywara <andre.przywara@arm.com> 2023-04-11 22:56:14 +00:00			`CONFIG_CONS_INDEX=2`
			`CONFIG_SPI=y`