Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2025-02-17 22:49:02 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/configs/odroid-c2_defconfig

74 lines
1.7 KiB
Text
Raw Normal View History

arm: add initial support for Amlogic Meson and ODROID-C2 This adds platform code for the Amlogic Meson GXBaby (S905) SoC and a board definition for ODROID-C2. This initial submission only supports UART and Ethernet (through the existing Designware driver). DTS files are the ones submitted to Linux arm-soc for 4.7 [1]. [1] https://patchwork.ozlabs.org/patch/603583/ Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-05-08 08:30:16 +02:00
CONFIG_ARM=y
CONFIG_ARCH_MESON=y
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-20 18:22:39 -06:00
CONFIG_TEXT_BASE=0x01000000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-10 15:31:07 -04:00
CONFIG_NR_DRAM_BANKS=1
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-02-17 09:58:06 -05:00
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000
env: Finish migration of common ENV options - In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-18 20:02:10 -05:00
CONFIG_ENV_SIZE=0x2000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-22 13:38:00 -05:00
CONFIG_DM_GPIO=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-06-28 10:17:29 -04:00
CONFIG_DEFAULT_DEVICE_TREE="meson-gxbb-odroidc2"
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-05-01 11:50:26 -04:00
CONFIG_OF_LIBFDT_OVERLAY=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-02-17 09:58:06 -05:00
CONFIG_DM_RESET=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-06-04 11:57:37 -04:00
CONFIG_DEBUG_UART_BASE=0xc81004c0
CONFIG_DEBUG_UART_CLOCK=24000000
Kconfig: Move config IDENT_STRING to Kconfig Move the config IDENT_STRING to Kconfig and migrate all boards [sivadur: Migrate zynq boards] Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> [trini: Update configs, add some default to sunxi Kconfig] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-07-29 15:31:47 +05:30
CONFIG_IDENT_STRING=" odroid-c2"
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 13:36:51 -04:00
CONFIG_SYS_LOAD_ADDR=0x1000000
configs: Resync defconfigs Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-19 09:47:40 -04:00
CONFIG_DEBUG_UART=y
Convert CONFIG_REMAKE_ELF to Kconfig This converts the following to Kconfig: CONFIG_REMAKE_ELF Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-01-29 18:25:30 +03:00
CONFIG_REMAKE_ELF=y
ARM: meson: enable FIT with LEGACY_IMAGE_FORMAT on all configs Allow all boards to boot with a fitImage, but keep support for Legacy image format for now. Link: https://lore.kernel.org/r/20231023-usb-dfu-boot-v1-1-df9d121c67c1@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-10-23 14:41:34 +02:00
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
CONFIG_LEGACY_IMAGE_FORMAT=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-12-18 20:19:09 -05:00
CONFIG_OF_BOARD_SETUP=y
common/Kconfig: Add DISPLAY_CPUINFO Create a Kconfig entry for DISPLAY_CPUINFO and make it be the default in certain architectures. Migrate all config files. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2016-10-08 14:41:44 -04:00
# CONFIG_DISPLAY_CPUINFO is not set
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-09 12:22:06 -04:00
CONFIG_MISC_INIT_R=y
Convert CONFIG_SYS_MAXARGS to Kconfig This converts the following to Kconfig: CONFIG_SYS_MAXARGS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-11 16:21:06 -04:00
CONFIG_SYS_MAXARGS=32
arm: add initial support for Amlogic Meson and ODROID-C2 This adds platform code for the Amlogic Meson GXBaby (S905) SoC and a board definition for ODROID-C2. This initial submission only supports UART and Ethernet (through the existing Designware driver). DTS files are the ones submitted to Linux arm-soc for 4.7 [1]. [1] https://patchwork.ozlabs.org/patch/603583/ Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-05-08 08:30:16 +02:00
# CONFIG_CMD_BDI is not set
# CONFIG_CMD_IMI is not set
configs: odroid-c2: update for HDMI output, ADC & USB keyboard Enable options to permit HDMI output on Odroid-C2 GXBB boards. Enable VPU Power Domain. Enable ADC and USB_KERBOARD. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Anand Moon <linux.amoon@gmail.com>
2020-07-23 08:06:35 +00:00
CONFIG_CMD_ADC=y
odroid-c2: enable GPIO GPIOs are now supported on Meson GXBB, enable driver and command in the config. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-10 00:30:05 +02:00
CONFIG_CMD_GPIO=y
odroid-c2: enable I2C Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
2017-10-29 10:09:01 +01:00
CONFIG_CMD_I2C=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-14 19:58:53 -04:00
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_MMC=y
odroid-c2: enable USB host controller Enable the second USB controller, which is connected to a hub with 4 ports. The first controller is for the OTG port and is currently not supported. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> [narmstrong: removed useless DWC2_UTMI_WIDTH in meson64.h] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-08-18 15:42:55 +02:00
CONFIG_CMD_USB=y
arm: add initial support for Amlogic Meson and ODROID-C2 This adds platform code for the Amlogic Meson GXBaby (S905) SoC and a board definition for ODROID-C2. This initial submission only supports UART and Ethernet (through the existing Designware driver). DTS files are the ones submitted to Linux arm-soc for 4.7 [1]. [1] https://patchwork.ozlabs.org/patch/603583/ Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-05-08 08:30:16 +02:00
# CONFIG_CMD_SETEXPR is not set
configs: Update Meson GX configs Enable USB on all Amlogic Meson GXL based board. Enable Regulator support on all boards. Enable ADC support on the LibreTech-CC board. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-06-14 13:43:41 +02:00
CONFIG_CMD_REGULATOR=y
arm: add initial support for Amlogic Meson and ODROID-C2 This adds platform code for the Amlogic Meson GXBaby (S905) SoC and a board definition for ODROID-C2. This initial submission only supports UART and Ethernet (through the existing Designware driver). DTS files are the ones submitted to Linux arm-soc for 4.7 [1]. [1] https://patchwork.ozlabs.org/patch/603583/ Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-05-08 08:30:16 +02:00
CONFIG_OF_CONTROL=y
env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol Today in initr_reloc_global_data() we use some non-obvious tests to determine if we need to relocate the env_addr within gd or not. In order to facilitate migration of other symbols to Kconfig we need to introduce a new symbol for this particular use case. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-12 22:46:36 -05:00
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
arm: add initial support for Amlogic Meson and ODROID-C2 This adds platform code for the Amlogic Meson GXBaby (S905) SoC and a board definition for ODROID-C2. This initial submission only supports UART and Ethernet (through the existing Designware driver). DTS files are the ones submitted to Linux arm-soc for 4.7 [1]. [1] https://patchwork.ozlabs.org/patch/603583/ Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-05-08 08:30:16 +02:00
CONFIG_NET_RANDOM_ETHADDR=y
configs: odroid-c2: update for HDMI output, ADC & USB keyboard Enable options to permit HDMI output on Odroid-C2 GXBB boards. Enable VPU Power Domain. Enable ADC and USB_KERBOARD. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Anand Moon <linux.amoon@gmail.com>
2020-07-23 08:06:35 +00:00
CONFIG_SARADC_MESON=y
odroid-c2: enable I2C Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
2017-10-29 10:09:01 +01:00
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_MESON=y
odroid-c2: enable new Meson GX MMC driver in board defconfig Enable new Meson GX MMC driver in Odroid C2 defconfig. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
2017-04-12 20:32:06 +02:00
CONFIG_MMC_MESON_GX=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-29 15:54:04 -04:00
CONFIG_PHY_REALTEK=y
configs: meson: use Designware glue driver for Amlogic Meson8b & later SoCs Use the proper Synopsys DWMAC Meson8b glue to handle the ethernet link type. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-02-25 09:44:35 +01:00
CONFIG_ETH_DESIGNWARE_MESON8B=y
odroid-c2: enable USB host controller Enable the second USB controller, which is connected to a hub with 4 ports. The first controller is for the OTG port and is currently not supported. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> [narmstrong: removed useless DWC2_UTMI_WIDTH in meson64.h] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-08-18 15:42:55 +02:00
CONFIG_PHY=y
CONFIG_MESON_GXBB_USB_PHY=y
meson: odroid-c2: enable Ethernet support through the device tree Remove the device definition from board file, update the driver with the new compatible property and update config with necessary options. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-08-16 11:49:50 +02:00
CONFIG_PINCTRL=y
CONFIG_PINCTRL_MESON_GXBB=y
configs: odroid-c2: update for HDMI output, ADC & USB keyboard Enable options to permit HDMI output on Odroid-C2 GXBB boards. Enable VPU Power Domain. Enable ADC and USB_KERBOARD. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Anand Moon <linux.amoon@gmail.com>
2020-07-23 08:06:35 +00:00
CONFIG_POWER_DOMAIN=y
configs: use the new MESON_EE_POWER_DOMAIN driver for Amlogic GXBB/GXL/GXM boards Linux 5.10-rc1 uses the new generic driver, so switch to it since GXBB and later is now supported. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-11-06 11:11:08 +01:00
CONFIG_MESON_EE_POWER_DOMAIN=y
cmd: Kconfig: Change dependency for CMD_ADC CMD_ADC selected DM_REGULATOR unconditionally without enabling DM. That's why change select to depends on to cover it. Kconfig is showing this issue as: WARNING: unmet direct dependencies detected for REGMAP Depends on [n]: DM [=n] Selected by [y]: - DM_REGULATOR_PBIAS [=y] && DM_REGULATOR [=y] Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Update CMD_ADC=y configs to enable DM_REGULATOR now] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-19 10:44:17 +02:00
CONFIG_DM_REGULATOR=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-07-09 15:13:08 -04:00
CONFIG_DM_REGULATOR_FIXED=y
odroid-c2: enable USB host controller Enable the second USB controller, which is connected to a hub with 4 ports. The first controller is for the OTG port and is currently not supported. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> [narmstrong: removed useless DWC2_UTMI_WIDTH in meson64.h] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-08-18 15:42:55 +02:00
CONFIG_DM_REGULATOR_GPIO=y
arm: add initial support for Amlogic Meson and ODROID-C2 This adds platform code for the Amlogic Meson GXBaby (S905) SoC and a board definition for ODROID-C2. This initial submission only supports UART and Ethernet (through the existing Designware driver). DTS files are the ones submitted to Linux arm-soc for 4.7 [1]. [1] https://patchwork.ozlabs.org/patch/603583/ Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-05-08 08:30:16 +02:00
CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_DEBUG_UART_SKIP_INIT=y
CONFIG_MESON_SERIAL=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-11-09 14:23:01 -05:00
CONFIG_SYSINFO=y
CONFIG_SYSINFO_SMBIOS=y
odroid-c2: enable USB host controller Enable the second USB controller, which is connected to a hub with 4 ports. The first controller is for the OTG port and is currently not supported. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> [narmstrong: removed useless DWC2_UTMI_WIDTH in meson64.h] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-08-18 15:42:55 +02:00
CONFIG_USB=y
CONFIG_USB_DWC2=y
configs: odroid-c2: update for HDMI output, ADC & USB keyboard Enable options to permit HDMI output on Odroid-C2 GXBB boards. Enable VPU Power Domain. Enable ADC and USB_KERBOARD. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Anand Moon <linux.amoon@gmail.com>
2020-07-23 08:06:35 +00:00
CONFIG_USB_KEYBOARD=y
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-18 07:46:31 -06:00
CONFIG_VIDEO=y
configs: odroid-c2: update for HDMI output, ADC & USB keyboard Enable options to permit HDMI output on Odroid-C2 GXBB boards. Enable VPU Power Domain. Enable ADC and USB_KERBOARD. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Anand Moon <linux.amoon@gmail.com>
2020-07-23 08:06:35 +00:00
# CONFIG_VIDEO_BPP8 is not set
# CONFIG_VIDEO_BPP16 is not set
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_MESON=y
CONFIG_VIDEO_DT_SIMPLEFB=y
Convert CONFIG_SPLASH_SCREEN et al to Kconfig This converts the following to Kconfig: CONFIG_SPLASH_SCREEN CONFIG_SPLASH_SCREEN_ALIGN CONFIG_SPLASHIMAGE_GUARD CONFIG_SPLASH_SOURCE Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-11 11:23:35 -06:00
CONFIG_SPLASH_SCREEN=y
CONFIG_SPLASH_SCREEN_ALIGN=y
configs: migrate CONFIG_VIDEO_BMP_RLE8 to defconfigs Done with: ./tools/moveconfig.py VIDEO_BMP_RLE8 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-28 11:30:15 +02:00
CONFIG_VIDEO_BMP_RLE8=y
configs: migrate CONFIG_BMP_16/24/32BPP to defconfigs Done with: ./tools/moveconfig.py BMP_16BPP BMP_24BPP BMP_32BPP Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-28 11:30:16 +02:00
CONFIG_BMP_16BPP=y
CONFIG_BMP_24BPP=y
CONFIG_BMP_32BPP=y
Reference in a new issue Copy permalink