u-boot/arch/arm/include/asm/arch-lpc32xx/sys_proto.h

/*
 * Copyright (C) 2011 Vladimir Zapolskiy <vz@mleia.com>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef _LPC32XX_SYS_PROTO_H
#define _LPC32XX_SYS_PROTO_H

#include <asm/arch/emc.h>

void lpc32xx_uart_init(unsigned int uart_id);
void lpc32xx_dma_init(void);
void lpc32xx_mac_init(void);
void lpc32xx_mlc_nand_init(void);
void lpc32xx_slc_nand_init(void);
void lpc32xx_i2c_init(unsigned int devnum);
void lpc32xx_ssp_init(void);
#if defined(CONFIG_SPL_BUILD)
void ddr_init(const struct emc_dram_settings *dram);
#endif
#endif /* _LPC32XX_SYS_PROTO_H */
arm926ejs: add NXP LPC32x0 cpu series support This change adds initial support for NXP LPC32x0 SoC series. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Acked-by: Marek Vasut <marek.vasut@gmail.com> 2012-04-19 04:33:08 +00:00			`/*`
			`* Copyright (C) 2011 Vladimir Zapolskiy <vz@mleia.com>`
			`*`
Add GPL-2.0+ SPDX-License-Identifier to source files Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com> 2013-07-08 07:37:19 +00:00			`* SPDX-License-Identifier: GPL-2.0+`
arm926ejs: add NXP LPC32x0 cpu series support This change adds initial support for NXP LPC32x0 SoC series. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Acked-by: Marek Vasut <marek.vasut@gmail.com> 2012-04-19 04:33:08 +00:00			`*/`

			`#ifndef _LPC32XX_SYS_PROTO_H`
			`#define _LPC32XX_SYS_PROTO_H`

$Albert ARIBAUD \(3ADEV\)$ lpc32xx: add support for board work_92105 Work_92105 from Work Microwave is an LPC3250- based board with the following features: - 64MB or 128MB SDR DRAM - 1 GB SLC NAND, managed through MLC controller. - Ethernet - Ethernet + PHY SMSC8710 - I2C: - EEPROM (24M01-compatible) - RTC (DS1374-compatible) - Temperature sensor (DS620) - DACs (2 x MAX518) - SPI (through SSP interface) - Port expander MAX6957 - LCD display (HD44780-compatible), controlled through the port expander and DACs This board has SPL support, and uses the LPC32XX boot image format. Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr> 2015-03-31 09:40:51 +00:00			`#include <asm/arch/emc.h>`

arm926ejs: add NXP LPC32x0 cpu series support This change adds initial support for NXP LPC32x0 SoC series. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Acked-by: Marek Vasut <marek.vasut@gmail.com> 2012-04-19 04:33:08 +00:00			`void lpc32xx_uart_init(unsigned int uart_id);`
dma: lpc32xx: add DMA driver Incorporate DMA driver from legacy LPCLinux NXP BSP. The files taken from the legacy patch are: - lpc32xx DMA driver - lpc3250 header file DMA registers definition. The legacy driver was updated and clean-up as part of the integration with the latest u-boot. Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com> Acked-by: Marek Vasut <marex@denx.de> Tested-by: Vladimir Zapolskiy <vz@mleia.com> 2015-08-10 12:16:31 +00:00			`void lpc32xx_dma_init(void);`
$Albert ARIBAUD \(3ADEV\)$ lpc32xx: add Ethernet support Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr> 2015-03-31 09:40:43 +00:00			`void lpc32xx_mac_init(void);`
$Albert ARIBAUD \(3ADEV\)$ lpc32xx: mtd: nand: add MLC NAND controller The controller's Reed-Solomon ECC hardware is used except of course for raw reads and writes. It covers in- and out-of-band data together. The SPL framework is supported. Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr> 2015-03-31 09:40:44 +00:00			`void lpc32xx_mlc_nand_init(void);`
nand: lpc32xx: add SLC NAND controller support The change adds support of LPC32xx SLC NAND controller. LPC32xx SoC has two different mutually exclusive NAND controllers to communicate with single and multiple layer chips. This simple driver allows to specify NAND chip timings and defines custom read_buf()/write_buf() operations, because access to 8-bit data register must be 32-bit aligned. Support of hardware ECC calculation is not implemented (data correction is always done by software), since it requires a working DMA engine. The driver can be included to an SPL image. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Scott Wood <scottwood@freescale.com> Tested-by: Sylvain Lemieux <slemieux@tycoint.com> 2015-07-18 00:07:52 +00:00			`void lpc32xx_slc_nand_init(void);`
$Albert ARIBAUD \(3ADEV\)$ lpc32xx: i2c: add LPC32xx I2C interface support Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr> 2015-03-31 09:40:45 +00:00			`void lpc32xx_i2c_init(unsigned int devnum);`
$Albert ARIBAUD \(3ADEV\)$ lpc32xx: add LPC32xx SSP support (SPI mode) Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr> 2015-03-31 09:40:47 +00:00			`void lpc32xx_ssp_init(void);`
$Albert ARIBAUD \(3ADEV\)$ lpc32xx: add support for board work_92105 Work_92105 from Work Microwave is an LPC3250- based board with the following features: - 64MB or 128MB SDR DRAM - 1 GB SLC NAND, managed through MLC controller. - Ethernet - Ethernet + PHY SMSC8710 - I2C: - EEPROM (24M01-compatible) - RTC (DS1374-compatible) - Temperature sensor (DS620) - DACs (2 x MAX518) - SPI (through SSP interface) - Port expander MAX6957 - LCD display (HD44780-compatible), controlled through the port expander and DACs This board has SPL support, and uses the LPC32XX boot image format. Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr> 2015-03-31 09:40:51 +00:00			`#if defined(CONFIG_SPL_BUILD)`
			`void ddr_init(const struct emc_dram_settings *dram);`
			`#endif`
arm926ejs: add NXP LPC32x0 cpu series support This change adds initial support for NXP LPC32x0 SoC series. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Acked-by: Marek Vasut <marek.vasut@gmail.com> 2012-04-19 04:33:08 +00:00			`#endif /* _LPC32XX_SYS_PROTO_H */`