Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-06 13:14:27 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/drivers/usb/musb/musb_debug.h

192 lines
5.2 KiB
C
Raw Normal View History

SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-06 21:58:06 +00:00
/* SPDX-License-Identifier: GPL-2.0+ */
OMAP3 Add usb device support This change adds the usb device support for musb. Omap3 platform support added at the same level as davinci. The interface for usbtty to use the musb device support was added. Verified on omap3 beagle, zoom1 and zoom2. Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-10-31 17:37:41 +00:00
/*
* Copyright (c) 2009 Wind River Systems, Inc.
* Tom Rix <Tom.Rix@windriver.com>
*/
/* Define MUSB_DEBUG before including this file to get debug macros */
#ifdef MUSB_DEBUG
#define MUSB_FLAGS_PRINT(v, x, y) \
if (((v) & MUSB_##x##_##y)) \
serial_printf("\t\t"#y"\n")
static inline void musb_print_pwr(u8 b)
{
serial_printf("\tpower 0x%2.2x\n", b);
MUSB_FLAGS_PRINT(b, POWER, ISOUPDATE);
MUSB_FLAGS_PRINT(b, POWER, SOFTCONN);
MUSB_FLAGS_PRINT(b, POWER, HSENAB);
MUSB_FLAGS_PRINT(b, POWER, HSMODE);
MUSB_FLAGS_PRINT(b, POWER, RESET);
MUSB_FLAGS_PRINT(b, POWER, RESUME);
MUSB_FLAGS_PRINT(b, POWER, SUSPENDM);
MUSB_FLAGS_PRINT(b, POWER, ENSUSPEND);
}
static inline void musb_print_csr0(u16 w)
{
serial_printf("\tcsr0 0x%4.4x\n", w);
MUSB_FLAGS_PRINT(w, CSR0, FLUSHFIFO);
MUSB_FLAGS_PRINT(w, CSR0_P, SVDSETUPEND);
MUSB_FLAGS_PRINT(w, CSR0_P, SVDRXPKTRDY);
MUSB_FLAGS_PRINT(w, CSR0_P, SENDSTALL);
MUSB_FLAGS_PRINT(w, CSR0_P, SETUPEND);
MUSB_FLAGS_PRINT(w, CSR0_P, DATAEND);
MUSB_FLAGS_PRINT(w, CSR0_P, SENTSTALL);
MUSB_FLAGS_PRINT(w, CSR0, TXPKTRDY);
MUSB_FLAGS_PRINT(w, CSR0, RXPKTRDY);
}
static inline void musb_print_intrusb(u8 b)
{
serial_printf("\tintrusb 0x%2.2x\n", b);
MUSB_FLAGS_PRINT(b, INTR, VBUSERROR);
MUSB_FLAGS_PRINT(b, INTR, SESSREQ);
MUSB_FLAGS_PRINT(b, INTR, DISCONNECT);
MUSB_FLAGS_PRINT(b, INTR, CONNECT);
MUSB_FLAGS_PRINT(b, INTR, SOF);
MUSB_FLAGS_PRINT(b, INTR, RESUME);
MUSB_FLAGS_PRINT(b, INTR, SUSPEND);
if (b & MUSB_INTR_BABBLE)
serial_printf("\t\tMUSB_INTR_RESET or MUSB_INTR_BABBLE\n");
}
static inline void musb_print_intrtx(u16 w)
{
serial_printf("\tintrtx 0x%4.4x\n", w);
}
static inline void musb_print_intrrx(u16 w)
{
serial_printf("\tintrx 0x%4.4x\n", w);
}
static inline void musb_print_devctl(u8 b)
{
serial_printf("\tdevctl 0x%2.2x\n", b);
if (b & MUSB_DEVCTL_BDEVICE)
serial_printf("\t\tB device\n");
else
serial_printf("\t\tA device\n");
if (b & MUSB_DEVCTL_FSDEV)
serial_printf("\t\tFast Device -(host mode)\n");
if (b & MUSB_DEVCTL_LSDEV)
serial_printf("\t\tSlow Device -(host mode)\n");
if (b & MUSB_DEVCTL_HM)
serial_printf("\t\tHost mode\n");
else
serial_printf("\t\tPeripherial mode\n");
if (b & MUSB_DEVCTL_HR)
serial_printf("\t\tHost request started(B device)\n");
else
serial_printf("\t\tHost request finished(B device)\n");
if (b & MUSB_DEVCTL_BDEVICE) {
if (b & MUSB_DEVCTL_SESSION)
serial_printf("\t\tStart of session(B device)\n");
else
serial_printf("\t\tEnd of session(B device)\n");
} else {
if (b & MUSB_DEVCTL_SESSION)
serial_printf("\t\tStart of session(A device)\n");
else
serial_printf("\t\tEnd of session(A device)\n");
}
}
static inline void musb_print_config(u8 b)
{
serial_printf("\tconfig 0x%2.2x\n", b);
if (b & MUSB_CONFIGDATA_MPRXE)
serial_printf("\t\tAuto combine rx bulk packets\n");
if (b & MUSB_CONFIGDATA_MPTXE)
serial_printf("\t\tAuto split tx bulk packets\n");
if (b & MUSB_CONFIGDATA_BIGENDIAN)
serial_printf("\t\tBig Endian ordering\n");
else
serial_printf("\t\tLittle Endian ordering\n");
if (b & MUSB_CONFIGDATA_HBRXE)
serial_printf("\t\tHigh speed rx iso endpoint\n");
if (b & MUSB_CONFIGDATA_HBTXE)
serial_printf("\t\tHigh speed tx iso endpoint\n");
if (b & MUSB_CONFIGDATA_DYNFIFO)
serial_printf("\t\tDynamic fifo sizing\n");
if (b & MUSB_CONFIGDATA_SOFTCONE)
serial_printf("\t\tSoft Connect\n");
if (b & MUSB_CONFIGDATA_UTMIDW)
serial_printf("\t\t16 bit data width\n");
else
serial_printf("\t\t8 bit data width\n");
}
static inline void musb_print_rxmaxp(u16 w)
{
serial_printf("\trxmaxp 0x%4.4x\n", w);
}
static inline void musb_print_rxcsr(u16 w)
{
serial_printf("\trxcsr 0x%4.4x\n", w);
MUSB_FLAGS_PRINT(w, RXCSR, AUTOCLEAR);
MUSB_FLAGS_PRINT(w, RXCSR, DMAENAB);
MUSB_FLAGS_PRINT(w, RXCSR, DISNYET);
MUSB_FLAGS_PRINT(w, RXCSR, PID_ERR);
MUSB_FLAGS_PRINT(w, RXCSR, DMAMODE);
MUSB_FLAGS_PRINT(w, RXCSR, CLRDATATOG);
MUSB_FLAGS_PRINT(w, RXCSR, FLUSHFIFO);
MUSB_FLAGS_PRINT(w, RXCSR, DATAERROR);
MUSB_FLAGS_PRINT(w, RXCSR, FIFOFULL);
MUSB_FLAGS_PRINT(w, RXCSR, RXPKTRDY);
MUSB_FLAGS_PRINT(w, RXCSR_P, SENTSTALL);
MUSB_FLAGS_PRINT(w, RXCSR_P, SENDSTALL);
MUSB_FLAGS_PRINT(w, RXCSR_P, OVERRUN);
if (w & MUSB_RXCSR_P_ISO)
serial_printf("\t\tiso mode\n");
else
serial_printf("\t\tbulk mode\n");
}
static inline void musb_print_txmaxp(u16 w)
{
serial_printf("\ttxmaxp 0x%4.4x\n", w);
}
static inline void musb_print_txcsr(u16 w)
{
serial_printf("\ttxcsr 0x%4.4x\n", w);
MUSB_FLAGS_PRINT(w, TXCSR, TXPKTRDY);
MUSB_FLAGS_PRINT(w, TXCSR, FIFONOTEMPTY);
MUSB_FLAGS_PRINT(w, TXCSR, FLUSHFIFO);
MUSB_FLAGS_PRINT(w, TXCSR, CLRDATATOG);
MUSB_FLAGS_PRINT(w, TXCSR_P, UNDERRUN);
MUSB_FLAGS_PRINT(w, TXCSR_P, SENTSTALL);
MUSB_FLAGS_PRINT(w, TXCSR_P, SENDSTALL);
if (w & MUSB_TXCSR_MODE)
serial_printf("\t\tTX mode\n");
else
serial_printf("\t\tRX mode\n");
}
#else
/* stubs */
#define musb_print_pwr(b)
#define musb_print_csr0(w)
#define musb_print_intrusb(b)
#define musb_print_intrtx(w)
#define musb_print_intrrx(w)
#define musb_print_devctl(b)
#define musb_print_config(b)
#define musb_print_rxmaxp(w)
#define musb_print_rxcsr(w)
#define musb_print_txmaxp(w)
#define musb_print_txcsr(w)
#endif /* MUSB_DEBUG */
Reference in a new issue Copy permalink