2023-02-22 09:05:12 +00:00
|
|
|
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
|
|
|
|
|
|
/dts-v1/;
|
|
|
|
|
2023-05-29 07:34:23 +00:00
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
2023-10-17 17:02:08 +00:00
|
|
|
#include <dt-bindings/leds/common.h>
|
2023-02-22 09:05:12 +00:00
|
|
|
#include "rk3588.dtsi"
|
|
|
|
|
|
|
|
/ {
|
|
|
|
model = "Radxa ROCK 5 Model B";
|
|
|
|
compatible = "radxa,rock-5b", "rockchip,rk3588";
|
|
|
|
|
|
|
|
aliases {
|
|
|
|
mmc0 = &sdhci;
|
2023-09-05 11:47:35 +00:00
|
|
|
mmc1 = &sdmmc;
|
2023-10-17 17:02:08 +00:00
|
|
|
mmc2 = &sdio;
|
2023-02-22 09:05:12 +00:00
|
|
|
serial2 = &uart2;
|
|
|
|
};
|
|
|
|
|
|
|
|
chosen {
|
|
|
|
stdout-path = "serial2:1500000n8";
|
|
|
|
};
|
|
|
|
|
2023-09-05 11:47:35 +00:00
|
|
|
analog-sound {
|
2023-05-29 07:34:23 +00:00
|
|
|
compatible = "audio-graph-card";
|
2023-09-05 11:47:35 +00:00
|
|
|
label = "rk3588-es8316";
|
2023-05-29 07:34:23 +00:00
|
|
|
|
|
|
|
widgets = "Microphone", "Mic Jack",
|
|
|
|
"Headphone", "Headphones";
|
|
|
|
|
|
|
|
routing = "MIC2", "Mic Jack",
|
|
|
|
"Headphones", "HPOL",
|
|
|
|
"Headphones", "HPOR";
|
|
|
|
|
|
|
|
dais = <&i2s0_8ch_p0>;
|
|
|
|
hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&hp_detect>;
|
|
|
|
};
|
|
|
|
|
2023-10-17 17:02:08 +00:00
|
|
|
leds {
|
|
|
|
compatible = "gpio-leds";
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&led_rgb_b>;
|
|
|
|
|
|
|
|
led_rgb_b {
|
|
|
|
function = LED_FUNCTION_STATUS;
|
|
|
|
color = <LED_COLOR_ID_BLUE>;
|
|
|
|
gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
|
|
|
|
linux,default-trigger = "heartbeat";
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
2023-09-05 11:47:35 +00:00
|
|
|
fan: pwm-fan {
|
|
|
|
compatible = "pwm-fan";
|
|
|
|
cooling-levels = <0 95 145 195 255>;
|
|
|
|
fan-supply = <&vcc5v0_sys>;
|
|
|
|
pwms = <&pwm1 0 50000 0>;
|
|
|
|
#cooling-cells = <2>;
|
|
|
|
};
|
|
|
|
|
2023-10-17 17:02:08 +00:00
|
|
|
vcc3v3_pcie2x1l0: vcc3v3-pcie2x1l0-regulator {
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
enable-active-high;
|
|
|
|
gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pcie2_0_vcc3v3_en>;
|
|
|
|
regulator-name = "vcc3v3_pcie2x1l0";
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
startup-delay-us = <50000>;
|
|
|
|
vin-supply = <&vcc5v0_sys>;
|
|
|
|
};
|
|
|
|
|
|
|
|
vcc3v3_pcie2x1l2: vcc3v3-pcie2x1l2-regulator {
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
regulator-name = "vcc3v3_pcie2x1l2";
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
startup-delay-us = <5000>;
|
|
|
|
vin-supply = <&vcc_3v3_s3>;
|
|
|
|
};
|
|
|
|
|
|
|
|
vcc3v3_pcie30: vcc3v3-pcie30-regulator {
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
enable-active-high;
|
|
|
|
gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pcie3_vcc3v3_en>;
|
|
|
|
regulator-name = "vcc3v3_pcie30";
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
startup-delay-us = <5000>;
|
|
|
|
vin-supply = <&vcc5v0_sys>;
|
|
|
|
};
|
|
|
|
|
2023-09-05 11:47:35 +00:00
|
|
|
vcc5v0_host: vcc5v0-host-regulator {
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
regulator-name = "vcc5v0_host";
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-min-microvolt = <5000000>;
|
|
|
|
regulator-max-microvolt = <5000000>;
|
|
|
|
enable-active-high;
|
|
|
|
gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&vcc5v0_host_en>;
|
|
|
|
vin-supply = <&vcc5v0_sys>;
|
|
|
|
};
|
|
|
|
|
2023-02-22 09:05:12 +00:00
|
|
|
vcc5v0_sys: vcc5v0-sys-regulator {
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
regulator-name = "vcc5v0_sys";
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-min-microvolt = <5000000>;
|
|
|
|
regulator-max-microvolt = <5000000>;
|
|
|
|
};
|
2023-09-05 11:47:35 +00:00
|
|
|
|
|
|
|
vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
regulator-name = "vcc_1v1_nldo_s3";
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-min-microvolt = <1100000>;
|
|
|
|
regulator-max-microvolt = <1100000>;
|
|
|
|
vin-supply = <&vcc5v0_sys>;
|
|
|
|
};
|
2023-02-22 09:05:12 +00:00
|
|
|
};
|
|
|
|
|
2023-10-17 17:02:08 +00:00
|
|
|
&combphy0_ps {
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&combphy1_ps {
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
2023-05-29 07:34:23 +00:00
|
|
|
&cpu_b0 {
|
|
|
|
cpu-supply = <&vdd_cpu_big0_s0>;
|
|
|
|
};
|
|
|
|
|
|
|
|
&cpu_b1 {
|
|
|
|
cpu-supply = <&vdd_cpu_big0_s0>;
|
|
|
|
};
|
|
|
|
|
|
|
|
&cpu_b2 {
|
|
|
|
cpu-supply = <&vdd_cpu_big1_s0>;
|
|
|
|
};
|
|
|
|
|
|
|
|
&cpu_b3 {
|
|
|
|
cpu-supply = <&vdd_cpu_big1_s0>;
|
|
|
|
};
|
|
|
|
|
2023-09-05 11:47:35 +00:00
|
|
|
&cpu_l0 {
|
|
|
|
cpu-supply = <&vdd_cpu_lit_s0>;
|
|
|
|
};
|
|
|
|
|
|
|
|
&cpu_l1 {
|
|
|
|
cpu-supply = <&vdd_cpu_lit_s0>;
|
|
|
|
};
|
|
|
|
|
|
|
|
&cpu_l2 {
|
|
|
|
cpu-supply = <&vdd_cpu_lit_s0>;
|
|
|
|
};
|
|
|
|
|
|
|
|
&cpu_l3 {
|
|
|
|
cpu-supply = <&vdd_cpu_lit_s0>;
|
|
|
|
};
|
|
|
|
|
2023-05-29 07:34:23 +00:00
|
|
|
&i2c0 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&i2c0m2_xfer>;
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
vdd_cpu_big0_s0: regulator@42 {
|
|
|
|
compatible = "rockchip,rk8602";
|
|
|
|
reg = <0x42>;
|
|
|
|
fcs,suspend-voltage-selector = <1>;
|
|
|
|
regulator-name = "vdd_cpu_big0_s0";
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-min-microvolt = <550000>;
|
|
|
|
regulator-max-microvolt = <1050000>;
|
|
|
|
regulator-ramp-delay = <2300>;
|
|
|
|
vin-supply = <&vcc5v0_sys>;
|
|
|
|
|
|
|
|
regulator-state-mem {
|
|
|
|
regulator-off-in-suspend;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
vdd_cpu_big1_s0: regulator@43 {
|
|
|
|
compatible = "rockchip,rk8603", "rockchip,rk8602";
|
|
|
|
reg = <0x43>;
|
|
|
|
fcs,suspend-voltage-selector = <1>;
|
|
|
|
regulator-name = "vdd_cpu_big1_s0";
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-min-microvolt = <550000>;
|
|
|
|
regulator-max-microvolt = <1050000>;
|
|
|
|
regulator-ramp-delay = <2300>;
|
|
|
|
vin-supply = <&vcc5v0_sys>;
|
|
|
|
|
|
|
|
regulator-state-mem {
|
|
|
|
regulator-off-in-suspend;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&i2c6 {
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
hym8563: rtc@51 {
|
|
|
|
compatible = "haoyu,hym8563";
|
|
|
|
reg = <0x51>;
|
|
|
|
#clock-cells = <0>;
|
|
|
|
clock-output-names = "hym8563";
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&hym8563_int>;
|
|
|
|
interrupt-parent = <&gpio0>;
|
|
|
|
interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
|
|
|
|
wakeup-source;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&i2c7 {
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
es8316: audio-codec@11 {
|
|
|
|
compatible = "everest,es8316";
|
|
|
|
reg = <0x11>;
|
|
|
|
clocks = <&cru I2S0_8CH_MCLKOUT>;
|
|
|
|
clock-names = "mclk";
|
2023-09-05 11:47:35 +00:00
|
|
|
assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
|
|
|
|
assigned-clock-rates = <12288000>;
|
2023-05-29 07:34:23 +00:00
|
|
|
#sound-dai-cells = <0>;
|
|
|
|
|
|
|
|
port {
|
|
|
|
es8316_p0_0: endpoint {
|
|
|
|
remote-endpoint = <&i2s0_8ch_p0_0>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&i2s0_8ch {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&i2s0_lrck
|
|
|
|
&i2s0_mclk
|
|
|
|
&i2s0_sclk
|
|
|
|
&i2s0_sdi0
|
|
|
|
&i2s0_sdo0>;
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
i2s0_8ch_p0: port {
|
|
|
|
i2s0_8ch_p0_0: endpoint {
|
|
|
|
dai-format = "i2s";
|
|
|
|
mclk-fs = <256>;
|
|
|
|
remote-endpoint = <&es8316_p0_0>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
2023-10-17 17:02:08 +00:00
|
|
|
&pcie2x1l0 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pcie2_0_rst>;
|
|
|
|
reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
|
|
|
|
vpcie3v3-supply = <&vcc3v3_pcie2x1l0>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&pcie2x1l2 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pcie2_2_rst>;
|
|
|
|
reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
|
|
|
|
vpcie3v3-supply = <&vcc3v3_pcie2x1l2>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&pcie30phy {
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&pcie3x4 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pcie3_rst>;
|
|
|
|
reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
|
|
|
|
vpcie3v3-supply = <&vcc3v3_pcie30>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
2023-05-29 07:34:23 +00:00
|
|
|
&pinctrl {
|
|
|
|
hym8563 {
|
|
|
|
hym8563_int: hym8563-int {
|
|
|
|
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
2023-10-17 17:02:08 +00:00
|
|
|
leds {
|
|
|
|
led_rgb_b: led-rgb-b {
|
|
|
|
rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
2023-05-29 07:34:23 +00:00
|
|
|
sound {
|
|
|
|
hp_detect: hp-detect {
|
|
|
|
rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
|
};
|
|
|
|
};
|
2023-09-05 11:47:35 +00:00
|
|
|
|
2023-10-17 17:02:08 +00:00
|
|
|
pcie2 {
|
|
|
|
pcie2_0_rst: pcie2-0-rst {
|
|
|
|
rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pcie2_0_vcc3v3_en: pcie2-0-vcc-en {
|
|
|
|
rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pcie2_2_rst: pcie2-2-rst {
|
|
|
|
rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
pcie3 {
|
|
|
|
pcie3_rst: pcie3-rst {
|
|
|
|
rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pcie3_vcc3v3_en: pcie3-vcc3v3-en {
|
|
|
|
rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
2023-09-05 11:47:35 +00:00
|
|
|
usb {
|
|
|
|
vcc5v0_host_en: vcc5v0-host-en {
|
|
|
|
rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
|
};
|
|
|
|
};
|
2023-05-29 07:34:23 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
&pwm1 {
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
2023-09-05 11:47:35 +00:00
|
|
|
&saradc {
|
|
|
|
vref-supply = <&avcc_1v8_s0>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
2023-02-22 09:05:12 +00:00
|
|
|
&sdhci {
|
|
|
|
bus-width = <8>;
|
|
|
|
no-sdio;
|
|
|
|
no-sd;
|
|
|
|
non-removable;
|
|
|
|
mmc-hs400-1_8v;
|
|
|
|
mmc-hs400-enhanced-strobe;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
2023-09-05 11:47:35 +00:00
|
|
|
&sdmmc {
|
|
|
|
max-frequency = <200000000>;
|
|
|
|
no-sdio;
|
|
|
|
no-mmc;
|
|
|
|
bus-width = <4>;
|
|
|
|
cap-mmc-highspeed;
|
|
|
|
cap-sd-highspeed;
|
|
|
|
cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
|
|
|
|
disable-wp;
|
|
|
|
sd-uhs-sdr104;
|
|
|
|
vmmc-supply = <&vcc_3v3_s3>;
|
|
|
|
vqmmc-supply = <&vccio_sd_s0>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
2023-10-17 17:02:08 +00:00
|
|
|
&sdio {
|
|
|
|
max-frequency = <200000000>;
|
|
|
|
no-sd;
|
|
|
|
no-mmc;
|
|
|
|
non-removable;
|
|
|
|
bus-width = <4>;
|
|
|
|
cap-sdio-irq;
|
|
|
|
disable-wp;
|
|
|
|
keep-power-in-suspend;
|
|
|
|
wakeup-source;
|
|
|
|
sd-uhs-sdr12;
|
|
|
|
sd-uhs-sdr25;
|
|
|
|
sd-uhs-sdr50;
|
|
|
|
sd-uhs-sdr104;
|
|
|
|
vmmc-supply = <&vcc3v3_pcie2x1l0>;
|
|
|
|
vqmmc-supply = <&vcc_1v8_s3>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&sdiom0_pins>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&uart6 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&uart6m1_xfer &uart6m1_ctsn &uart6m1_rtsn>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
2023-09-05 11:47:35 +00:00
|
|
|
&spi2 {
|
|
|
|
status = "okay";
|
|
|
|
assigned-clocks = <&cru CLK_SPI2>;
|
|
|
|
assigned-clock-rates = <200000000>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
|
|
|
|
num-cs = <1>;
|
|
|
|
|
|
|
|
pmic@0 {
|
|
|
|
compatible = "rockchip,rk806";
|
|
|
|
spi-max-frequency = <1000000>;
|
|
|
|
reg = <0x0>;
|
|
|
|
|
|
|
|
interrupt-parent = <&gpio0>;
|
|
|
|
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
|
|
|
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
|
|
|
|
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
|
|
|
|
|
|
|
|
vcc1-supply = <&vcc5v0_sys>;
|
|
|
|
vcc2-supply = <&vcc5v0_sys>;
|
|
|
|
vcc3-supply = <&vcc5v0_sys>;
|
|
|
|
vcc4-supply = <&vcc5v0_sys>;
|
|
|
|
vcc5-supply = <&vcc5v0_sys>;
|
|
|
|
vcc6-supply = <&vcc5v0_sys>;
|
|
|
|
vcc7-supply = <&vcc5v0_sys>;
|
|
|
|
vcc8-supply = <&vcc5v0_sys>;
|
|
|
|
vcc9-supply = <&vcc5v0_sys>;
|
|
|
|
vcc10-supply = <&vcc5v0_sys>;
|
|
|
|
vcc11-supply = <&vcc_2v0_pldo_s3>;
|
|
|
|
vcc12-supply = <&vcc5v0_sys>;
|
|
|
|
vcc13-supply = <&vcc_1v1_nldo_s3>;
|
|
|
|
vcc14-supply = <&vcc_1v1_nldo_s3>;
|
|
|
|
vcca-supply = <&vcc5v0_sys>;
|
|
|
|
|
|
|
|
gpio-controller;
|
|
|
|
#gpio-cells = <2>;
|
|
|
|
|
|
|
|
rk806_dvs1_null: dvs1-null-pins {
|
|
|
|
pins = "gpio_pwrctrl2";
|
|
|
|
function = "pin_fun0";
|
|
|
|
};
|
|
|
|
|
|
|
|
rk806_dvs2_null: dvs2-null-pins {
|
|
|
|
pins = "gpio_pwrctrl2";
|
|
|
|
function = "pin_fun0";
|
|
|
|
};
|
|
|
|
|
|
|
|
rk806_dvs3_null: dvs3-null-pins {
|
|
|
|
pins = "gpio_pwrctrl3";
|
|
|
|
function = "pin_fun0";
|
|
|
|
};
|
|
|
|
|
|
|
|
regulators {
|
|
|
|
vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-min-microvolt = <550000>;
|
|
|
|
regulator-max-microvolt = <950000>;
|
|
|
|
regulator-ramp-delay = <12500>;
|
|
|
|
regulator-name = "vdd_gpu_s0";
|
|
|
|
regulator-enable-ramp-delay = <400>;
|
|
|
|
|
|
|
|
regulator-state-mem {
|
|
|
|
regulator-off-in-suspend;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-min-microvolt = <550000>;
|
|
|
|
regulator-max-microvolt = <950000>;
|
|
|
|
regulator-ramp-delay = <12500>;
|
|
|
|
regulator-name = "vdd_cpu_lit_s0";
|
|
|
|
|
|
|
|
regulator-state-mem {
|
|
|
|
regulator-off-in-suspend;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
vdd_log_s0: dcdc-reg3 {
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-min-microvolt = <675000>;
|
|
|
|
regulator-max-microvolt = <750000>;
|
|
|
|
regulator-ramp-delay = <12500>;
|
|
|
|
regulator-name = "vdd_log_s0";
|
|
|
|
|
|
|
|
regulator-state-mem {
|
|
|
|
regulator-off-in-suspend;
|
|
|
|
regulator-suspend-microvolt = <750000>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-min-microvolt = <550000>;
|
|
|
|
regulator-max-microvolt = <950000>;
|
|
|
|
regulator-ramp-delay = <12500>;
|
|
|
|
regulator-name = "vdd_vdenc_s0";
|
|
|
|
|
|
|
|
regulator-state-mem {
|
|
|
|
regulator-off-in-suspend;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
vdd_ddr_s0: dcdc-reg5 {
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-min-microvolt = <675000>;
|
|
|
|
regulator-max-microvolt = <900000>;
|
|
|
|
regulator-ramp-delay = <12500>;
|
|
|
|
regulator-name = "vdd_ddr_s0";
|
|
|
|
|
|
|
|
regulator-state-mem {
|
|
|
|
regulator-off-in-suspend;
|
|
|
|
regulator-suspend-microvolt = <850000>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
vdd2_ddr_s3: dcdc-reg6 {
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-name = "vdd2_ddr_s3";
|
|
|
|
|
|
|
|
regulator-state-mem {
|
|
|
|
regulator-on-in-suspend;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
vcc_2v0_pldo_s3: dcdc-reg7 {
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-min-microvolt = <2000000>;
|
|
|
|
regulator-max-microvolt = <2000000>;
|
|
|
|
regulator-ramp-delay = <12500>;
|
|
|
|
regulator-name = "vdd_2v0_pldo_s3";
|
|
|
|
|
|
|
|
regulator-state-mem {
|
|
|
|
regulator-on-in-suspend;
|
|
|
|
regulator-suspend-microvolt = <2000000>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
vcc_3v3_s3: dcdc-reg8 {
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
regulator-name = "vcc_3v3_s3";
|
|
|
|
|
|
|
|
regulator-state-mem {
|
|
|
|
regulator-on-in-suspend;
|
|
|
|
regulator-suspend-microvolt = <3300000>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
vddq_ddr_s0: dcdc-reg9 {
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-name = "vddq_ddr_s0";
|
|
|
|
|
|
|
|
regulator-state-mem {
|
|
|
|
regulator-off-in-suspend;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
vcc_1v8_s3: dcdc-reg10 {
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-name = "vcc_1v8_s3";
|
|
|
|
|
|
|
|
regulator-state-mem {
|
|
|
|
regulator-on-in-suspend;
|
|
|
|
regulator-suspend-microvolt = <1800000>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
avcc_1v8_s0: pldo-reg1 {
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-name = "avcc_1v8_s0";
|
|
|
|
|
|
|
|
regulator-state-mem {
|
|
|
|
regulator-off-in-suspend;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
vcc_1v8_s0: pldo-reg2 {
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-name = "vcc_1v8_s0";
|
|
|
|
|
|
|
|
regulator-state-mem {
|
|
|
|
regulator-off-in-suspend;
|
|
|
|
regulator-suspend-microvolt = <1800000>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
avdd_1v2_s0: pldo-reg3 {
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-min-microvolt = <1200000>;
|
|
|
|
regulator-max-microvolt = <1200000>;
|
|
|
|
regulator-name = "avdd_1v2_s0";
|
|
|
|
|
|
|
|
regulator-state-mem {
|
|
|
|
regulator-off-in-suspend;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
vcc_3v3_s0: pldo-reg4 {
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
regulator-ramp-delay = <12500>;
|
|
|
|
regulator-name = "vcc_3v3_s0";
|
|
|
|
|
|
|
|
regulator-state-mem {
|
|
|
|
regulator-off-in-suspend;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
vccio_sd_s0: pldo-reg5 {
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
regulator-ramp-delay = <12500>;
|
|
|
|
regulator-name = "vccio_sd_s0";
|
|
|
|
|
|
|
|
regulator-state-mem {
|
|
|
|
regulator-off-in-suspend;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
pldo6_s3: pldo-reg6 {
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-name = "pldo6_s3";
|
|
|
|
|
|
|
|
regulator-state-mem {
|
|
|
|
regulator-on-in-suspend;
|
|
|
|
regulator-suspend-microvolt = <1800000>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
vdd_0v75_s3: nldo-reg1 {
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-min-microvolt = <750000>;
|
|
|
|
regulator-max-microvolt = <750000>;
|
|
|
|
regulator-name = "vdd_0v75_s3";
|
|
|
|
|
|
|
|
regulator-state-mem {
|
|
|
|
regulator-on-in-suspend;
|
|
|
|
regulator-suspend-microvolt = <750000>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
vdd_ddr_pll_s0: nldo-reg2 {
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-min-microvolt = <850000>;
|
|
|
|
regulator-max-microvolt = <850000>;
|
|
|
|
regulator-name = "vdd_ddr_pll_s0";
|
|
|
|
|
|
|
|
regulator-state-mem {
|
|
|
|
regulator-off-in-suspend;
|
|
|
|
regulator-suspend-microvolt = <850000>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
avdd_0v75_s0: nldo-reg3 {
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-min-microvolt = <750000>;
|
|
|
|
regulator-max-microvolt = <750000>;
|
|
|
|
regulator-name = "avdd_0v75_s0";
|
|
|
|
|
|
|
|
regulator-state-mem {
|
|
|
|
regulator-off-in-suspend;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
vdd_0v85_s0: nldo-reg4 {
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-min-microvolt = <850000>;
|
|
|
|
regulator-max-microvolt = <850000>;
|
|
|
|
regulator-name = "vdd_0v85_s0";
|
|
|
|
|
|
|
|
regulator-state-mem {
|
|
|
|
regulator-off-in-suspend;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
vdd_0v75_s0: nldo-reg5 {
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-min-microvolt = <750000>;
|
|
|
|
regulator-max-microvolt = <750000>;
|
|
|
|
regulator-name = "vdd_0v75_s0";
|
|
|
|
|
|
|
|
regulator-state-mem {
|
|
|
|
regulator-off-in-suspend;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
2023-02-22 09:05:12 +00:00
|
|
|
&uart2 {
|
|
|
|
pinctrl-0 = <&uart2m0_xfer>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
2023-09-05 11:47:35 +00:00
|
|
|
|
|
|
|
&u2phy2 {
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&u2phy2_host {
|
|
|
|
/* connected to USB hub, which is powered by vcc5v0_sys */
|
|
|
|
phy-supply = <&vcc5v0_sys>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&u2phy3 {
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&u2phy3_host {
|
|
|
|
phy-supply = <&vcc5v0_host>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&usb_host0_ehci {
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&usb_host0_ohci {
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&usb_host1_ehci {
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&usb_host1_ohci {
|
|
|
|
status = "okay";
|
|
|
|
};
|