u-boot/arch/powerpc/cpu/mpc85xx/p5040_ids.c

128 lines
3.8 KiB
C
Raw Normal View History

powerpc/85xx: Add P5040 processor support Add support for the Freescale P5040 SOC, which is similar to the P5020. Features of the P5040 are: Four P5040 single-threaded e5500 cores built Up to 2.4 GHz with 64-bit ISA support Three levels of instruction: user, supervisor, hypervisor CoreNet platform cache (CPC) 2.0 MB configures as dual 1 MB blocks hierarchical interconnect fabric Two 64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving support Up to 1600MT/s Memory pre-fetch engine DPAA incorporating acceleration for the following functions Packet parsing, classification, and distribution (FMAN) Queue management for scheduling, packet sequencing and congestion management (QMAN) Hardware buffer management for buffer allocation and de-allocation (BMAN) Cryptography acceleration (SEC 5.2) at up to 40 Gbps SerDes 20 lanes at up to 5 Gbps Supports SGMII, XAUI, PCIe rev1.1/2.0, SATA Ethernet interfaces Two 10 Gbps Ethernet MACs Ten 1 Gbps Ethernet MACs High-speed peripheral interfaces Two PCI Express 2.0/3.0 controllers Additional peripheral interfaces Two serial ATA (SATA 2.0) controllers Two high-speed USB 2.0 controllers with integrated PHY Enhanced secure digital host controller (SD/MMC/eMMC) Enhanced serial peripheral interface (eSPI) Two I2C controllers Four UARTs Integrated flash controller supporting NAND and NOR flash DMA Dual four channel Support for hardware virtualization and partitioning enforcement Extra privileged level for hypervisor support QorIQ Trust Architecture 1.1 Secure boot, secure debug, tamper detection, volatile key storage Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-05 11:09:19 +00:00
/*
* Copyright 2010-2011 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/fsl_portals.h>
#include <asm/fsl_liodn.h>
#ifdef CONFIG_SYS_DPAA_QBMAN
struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = {
/* dqrr liodn, frame data liodn, liodn off, sdest */
SET_QP_INFO(1, 2, 1, 0),
SET_QP_INFO(3, 4, 2, 1),
SET_QP_INFO(5, 6, 3, 2),
SET_QP_INFO(7, 8, 4, 3),
SET_QP_INFO(9, 10, 5, 0),
SET_QP_INFO(11, 12, 6, 1),
SET_QP_INFO(13, 14, 7, 2),
SET_QP_INFO(15, 16, 8, 3),
SET_QP_INFO(17, 18, 9, 0), /* for now, set sdest to 0 */
SET_QP_INFO(19, 20, 10, 0), /* for now, set sdest to 0 */
};
#endif
struct liodn_id_table liodn_tbl[] = {
#ifdef CONFIG_SYS_DPAA_QBMAN
SET_QMAN_LIODN(31),
SET_BMAN_LIODN(32),
#endif
SET_SDHC_LIODN(1, 64),
SET_USB_LIODN(1, "fsl-usb2-mph", 93),
SET_USB_LIODN(2, "fsl-usb2-dr", 94),
SET_SATA_LIODN(1, 95),
SET_SATA_LIODN(2, 96),
SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 195),
SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 2, 196),
SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 3, 197),
SET_DMA_LIODN(1, 193),
SET_DMA_LIODN(2, 194),
};
int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl);
#ifdef CONFIG_SYS_DPAA_FMAN
struct liodn_id_table fman1_liodn_tbl[] = {
SET_FMAN_RX_1G_LIODN(1, 0, 6),
SET_FMAN_RX_1G_LIODN(1, 1, 7),
SET_FMAN_RX_1G_LIODN(1, 2, 8),
SET_FMAN_RX_1G_LIODN(1, 3, 9),
SET_FMAN_RX_1G_LIODN(1, 4, 10),
SET_FMAN_RX_10G_LIODN(1, 0, 11),
};
int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl);
#if (CONFIG_SYS_NUM_FMAN == 2)
struct liodn_id_table fman2_liodn_tbl[] = {
SET_FMAN_RX_1G_LIODN(2, 0, 12),
SET_FMAN_RX_1G_LIODN(2, 1, 13),
SET_FMAN_RX_1G_LIODN(2, 2, 14),
SET_FMAN_RX_1G_LIODN(2, 3, 15),
SET_FMAN_RX_1G_LIODN(2, 4, 16),
SET_FMAN_RX_10G_LIODN(2, 0, 17),
};
int fman2_liodn_tbl_sz = ARRAY_SIZE(fman2_liodn_tbl);
#endif
#endif
struct liodn_id_table sec_liodn_tbl[] = {
SET_SEC_JR_LIODN_ENTRY(0, 129, 130),
SET_SEC_JR_LIODN_ENTRY(1, 131, 132),
SET_SEC_JR_LIODN_ENTRY(2, 133, 134),
SET_SEC_JR_LIODN_ENTRY(3, 135, 136),
SET_SEC_RTIC_LIODN_ENTRY(a, 89),
SET_SEC_RTIC_LIODN_ENTRY(b, 90),
SET_SEC_RTIC_LIODN_ENTRY(c, 91),
SET_SEC_RTIC_LIODN_ENTRY(d, 92),
SET_SEC_DECO_LIODN_ENTRY(0, 139, 140),
SET_SEC_DECO_LIODN_ENTRY(1, 141, 142),
SET_SEC_DECO_LIODN_ENTRY(2, 143, 144),
SET_SEC_DECO_LIODN_ENTRY(3, 145, 146),
};
int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl);
#ifdef CONFIG_SYS_FSL_RAID_ENGINE
struct liodn_id_table raide_liodn_tbl[] = {
SET_RAID_ENGINE_JQ_LIODN_ENTRY(0, 0, 60),
SET_RAID_ENGINE_JQ_LIODN_ENTRY(0, 1, 61),
SET_RAID_ENGINE_JQ_LIODN_ENTRY(1, 0, 62),
SET_RAID_ENGINE_JQ_LIODN_ENTRY(1, 1, 63),
};
int raide_liodn_tbl_sz = ARRAY_SIZE(raide_liodn_tbl);
#endif
struct liodn_id_table liodn_bases[] = {
[FSL_HW_PORTAL_SEC] = SET_LIODN_BASE_2(64, 101),
#ifdef CONFIG_SYS_DPAA_FMAN
[FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(32),
#endif
#if (CONFIG_SYS_NUM_FMAN == 2)
[FSL_HW_PORTAL_FMAN2] = SET_LIODN_BASE_1(160),
#endif
#ifdef CONFIG_SYS_FSL_RAID_ENGINE
[FSL_HW_PORTAL_RAID_ENGINE] = SET_LIODN_BASE_1(49),
#endif
};