u-boot/include/configs/venice2.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * (C) Copyright 2013-2014
 * NVIDIA Corporation <www.nvidia.com>
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#include <linux/sizes.h>

#include "tegra124-common.h"

/* High-level configuration options */
#define CONFIG_TEGRA_BOARD_STRING	"NVIDIA Venice2"

/* Board-specific serial config */
#define CONFIG_TEGRA_ENABLE_UARTA
#define CONFIG_SYS_NS16550_COM1		NV_PA_APB_UARTA_BASE

/* Environment in eMMC, at the end of 2nd "boot sector" */
#define CONFIG_SYS_MMC_ENV_DEV		0
#define CONFIG_SYS_MMC_ENV_PART		2
#define CONFIG_ENV_OFFSET		(-CONFIG_ENV_SIZE)

/* SPI */
#define CONFIG_SF_DEFAULT_MODE         SPI_MODE_0
#define CONFIG_SF_DEFAULT_SPEED        24000000
#define CONFIG_SPI_FLASH_SIZE          (4 << 20)

#include "tegra-common-usb-gadget.h"
#include "tegra-common-post.h"

#endif /* __CONFIG_H */
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> 2018-05-06 21:58:06 +00:00			`/* SPDX-License-Identifier: GPL-2.0+ */`
ARM: tegra: add Venice2 (Tegra124) board These are the board files for Venice2 (Tegra124), plus the AS3722 PMIC files. PMIC init will be moved to pmic_common_init later. This builds/boots on Venice2, SPI/MMC/USB/I2C all work. Audio, display and WB/LP0 are not supported yet. Signed-off-by: Tom Warren <twarren@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> 2014-01-24 19:46:18 +00:00			`/*`
			`* (C) Copyright 2013-2014`
			`* NVIDIA Corporation <www.nvidia.com>`
			`*/`

			`#ifndef __CONFIG_H`
			`#define __CONFIG_H`

sizes.h - consolidate for all architectures Copied from Linux sources "include/linux/sizes.h" commit 413541dd66d51f791a0b169d9b9014e4f56be13c Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Tom Rini <trini@ti.com> Cc: Stefan Roese <sr@denx.de> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Acked-by: Tom Rini <trini@ti.com> Acked-by: Stefan Roese <sr@denx.de> [trini: Add bcm Kona platforms to the patch] Signed-off-by: Tom Rini <trini@ti.com> 2014-02-26 13:47:58 +00:00			`#include <linux/sizes.h>`
ARM: tegra: add Venice2 (Tegra124) board These are the board files for Venice2 (Tegra124), plus the AS3722 PMIC files. PMIC init will be moved to pmic_common_init later. This builds/boots on Venice2, SPI/MMC/USB/I2C all work. Audio, display and WB/LP0 are not supported yet. Signed-off-by: Tom Warren <twarren@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> 2014-01-24 19:46:18 +00:00
			`#include "tegra124-common.h"`

			`/* High-level configuration options */`
			`#define CONFIG_TEGRA_BOARD_STRING "NVIDIA Venice2"`

			`/* Board-specific serial config */`
			`#define CONFIG_TEGRA_ENABLE_UARTA`
			`#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE`

			`/* Environment in eMMC, at the end of 2nd "boot sector" */`
			`#define CONFIG_SYS_MMC_ENV_DEV 0`
			`#define CONFIG_SYS_MMC_ENV_PART 2`
			`#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE)`

			`/* SPI */`
			`#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0`
			`#define CONFIG_SF_DEFAULT_SPEED 24000000`
			`#define CONFIG_SPI_FLASH_SIZE (4 << 20)`

ARM: tegra: enable DFU too Enable DFU protocol support (via the "dfu" command) on Tegra boards where USB device/gadget mode is enabled. Note that for DFU to operate correctly on Tegra, we still need some DFU fixes/enhancements that are going through the DFU -> USB trees. However, the code builds just fine without those changes, and applying this patch now will allow both sets of patches to meet in the main U-Boot tree much more quickly. In order to run test/dfu/dfu_gadget_test.sh, you would need to add the following to the board configuration: CONFIG_EXT4_WRITE CONFIG_CMD_EXT4_WRITE However, I haven't enabled those here, since I believe the main use-case for DFU on Tegra is raw flash writing, rather than filesystem access, so we don't need the additional code-size hit. However, I could be persuaded otherwise! We should probably add a separate test script for raw flash access. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com> 2014-07-25 23:16:54 +00:00			`#include "tegra-common-usb-gadget.h"`
ARM: tegra: add Venice2 (Tegra124) board These are the board files for Venice2 (Tegra124), plus the AS3722 PMIC files. PMIC init will be moved to pmic_common_init later. This builds/boots on Venice2, SPI/MMC/USB/I2C all work. Audio, display and WB/LP0 are not supported yet. Signed-off-by: Tom Warren <twarren@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> 2014-01-24 19:46:18 +00:00			`#include "tegra-common-post.h"`

			`#endif /* __CONFIG_H */`