u-boot/doc/device-tree-bindings/net/ti,dp83867.txt

34 lines
1.2 KiB
Text
Raw Normal View History

* Texas Instruments - dp83867 Giga bit ethernet phy
Required properties:
- reg - The ID number for the phy, usually a small integer
- ti,rx-internal-delay - RGMII Recieve Clock Delay - see dt-bindings/net/ti-dp83867.h
for applicable values
- ti,tx-internal-delay - RGMII Transmit Clock Delay - see dt-bindings/net/ti-dp83867.h
for applicable values
- ti,fifo-depth - Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h
for applicable values
- enet-phy-lane-swap - Indicates that PHY will swap the TX/RX lanes to
compensate for the board being designed with the lanes swapped.
- enet-phy-no-lane-swap - Indicates that PHY will disable swap of the
TX/RX lanes.
- ti,clk-output-sel - Clock output select - see dt-bindings/net/ti-dp83867.h
for applicable values
Default child nodes are standard Ethernet PHY device
nodes as described in doc/devicetree/bindings/net/ethernet.txt
Example:
ethernet-phy@0 {
reg = <0>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
enet-phy-lane-no-swap;
ti,clk-output-sel = <DP83867_CLK_O_SEL_CHN_A_TCLK>;
};
Datasheet can be found:
http://www.ti.com/product/DP83867IR/datasheet