u-boot/board/bf537-stamp/ether_bf537.h

111 lines
3.3 KiB
C
Raw Normal View History

#define PHYADDR 0x01
#define NO_PHY_REGS 0x20
#define DEFAULT_PHY_PHYID1 0x0007
#define DEFAULT_PHY_PHYID2 0xC0A3
#define PHY_MODECTL 0x00
#define PHY_MODESTAT 0x01
#define PHY_PHYID1 0x02
#define PHY_PHYID2 0x03
#define PHY_ANAR 0x04
#define PHY_ANLPAR 0x05
#define PHY_ANER 0x06
#define PHY_RESET 0x8000
#define PHY_ANEG_EN 0x1000
#define PHY_DUPLEX 0x0100
#define PHY_SPD_SET 0x2000
#define RECV_BUFSIZE (0x614)
typedef volatile u32 reg32;
typedef volatile u16 reg16;
typedef struct ADI_DMA_CONFIG_REG {
u16 b_DMA_EN:1; /* 0 Enabled */
u16 b_WNR:1; /* 1 Direction */
u16 b_WDSIZE:2; /* 2:3 Transfer word size */
u16 b_DMA2D:1; /* 4 DMA mode */
u16 b_RESTART:1; /* 5 Retain FIFO */
u16 b_DI_SEL:1; /* 6 Data interrupt timing select */
u16 b_DI_EN:1; /* 7 Data interrupt enabled */
u16 b_NDSIZE:4; /* 8:11 Flex descriptor size */
u16 b_FLOW:3; /* 12:14Flow */
} ADI_DMA_CONFIG_REG;
typedef struct adi_ether_frame_buffer {
u16 NoBytes; /* the no. of following bytes */
u8 Dest[6]; /* destination MAC address */
u8 Srce[6]; /* source MAC address */
u16 LTfield; /* length/type field */
u8 Data[0]; /* payload bytes */
} ADI_ETHER_FRAME_BUFFER;
/* 16 bytes/struct */
typedef struct dma_descriptor {
struct dma_descriptor *NEXT_DESC_PTR;
u32 START_ADDR;
ADI_DMA_CONFIG_REG CONFIG;
} DMA_DESCRIPTOR;
/* 10 bytes/struct in 12 bytes */
typedef struct adi_ether_buffer {
DMA_DESCRIPTOR Dma[2]; /* first for the frame, second for the status */
ADI_ETHER_FRAME_BUFFER *FrmData;/* pointer to data */
struct adi_ether_buffer *pNext; /* next buffer */
struct adi_ether_buffer *pPrev; /* prev buffer */
u16 IPHdrChksum; /* the IP header checksum */
u16 IPPayloadChksum; /* the IP header and payload checksum */
volatile u32 StatusWord; /* the frame status word */
} ADI_ETHER_BUFFER;
/* 40 bytes/struct in 44 bytes */
void SetupMacAddr(u8 * MACaddr);
void PollMdcDone(void);
void WrPHYReg(u16 PHYAddr, u16 RegAddr, u16 Data);
u16 RdPHYReg(u16 PHYAddr, u16 RegAddr);
void SoftResetPHY(void);
void DumpPHYRegs(void);
int SetupSystemRegs(int *opmode);
/**
* is_zero_ether_addr - Determine if give Ethernet address is all zeros.
* @addr: Pointer to a six-byte array containing the Ethernet address
*
* Return true if the address is all zeroes.
*/
static inline int is_zero_ether_addr(const u8 * addr)
{
return !(addr[0] | addr[1] | addr[2] | addr[3] | addr[4] | addr[5]);
}
/**
* is_multicast_ether_addr - Determine if the Ethernet address is a multicast.
* @addr: Pointer to a six-byte array containing the Ethernet address
*
* Return true if the address is a multicast address.
* By definition the broadcast address is also a multicast address.
*/
static inline int is_multicast_ether_addr(const u8 * addr)
{
return (0x01 & addr[0]);
}
/**
* is_valid_ether_addr - Determine if the given Ethernet address is valid
* @addr: Pointer to a six-byte array containing the Ethernet address
*
* Check that the Ethernet address (MAC) is not 00:00:00:00:00:00, is not
* a multicast address, and is not FF:FF:FF:FF:FF:FF.
*
* Return true if the address is valid.
*/
static inline int is_valid_ether_addr(const u8 * addr)
{
/* FF:FF:FF:FF:FF:FF is a multicast address so we don't need to
* explicitly check for it here. */
return !is_multicast_ether_addr(addr) && !is_zero_ether_addr(addr);
}