mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-15 07:43:07 +00:00
97 lines
2.5 KiB
ReStructuredText
97 lines
2.5 KiB
ReStructuredText
|
.. SPDX-License-Identifier: GPL-2.0+:
|
||
|
|
|
||
|
|
loads command
|
||
|
|
=============
|
||
|
|
|
||
|
|
Synopsis
|
||
|
|
--------
|
||
|
|
|
||
|
|
::
|
||
|
|
|
||
|
|
loads [offset [baud]]
|
||
|
|
|
||
|
|
Description
|
||
|
|
-----------
|
||
|
|
|
||
|
|
The loads command is used to transfer a file to the device via the serial line
|
||
|
|
using the Motorola S-record file format.
|
||
|
|
|
||
|
|
offset
|
||
|
|
offset added to the addresses in the S-record file
|
||
|
|
|
||
|
|
baud
|
||
|
|
baud rate to use for download. This parameter is only available if
|
||
|
|
CONFIG_SYS_LOADS_BAUD_CHANGE=y
|
||
|
|
|
||
|
|
Example
|
||
|
|
-------
|
||
|
|
|
||
|
|
As example file to be transferred we use a script printing 'hello s-record'.
|
||
|
|
Here are the commands to create the S-record file:
|
||
|
|
|
||
|
|
.. code-block:: bash
|
||
|
|
|
||
|
|
$ echo 'echo hello s-record' > script.txt
|
||
|
|
$ mkimage -T script -d script.txt script.scr
|
||
|
|
Image Name:
|
||
|
|
Created: Sun Jun 25 10:35:02 2023
|
||
|
|
Image Type: PowerPC Linux Script (gzip compressed)
|
||
|
|
Data Size: 28 Bytes = 0.03 KiB = 0.00 MiB
|
||
|
|
Load Address: 00000000
|
||
|
|
Entry Point: 00000000
|
||
|
|
Contents:
|
||
|
|
Image 0: 20 Bytes = 0.02 KiB = 0.00 MiB
|
||
|
|
$ srec_cat script.scr -binary -CRLF -Output script.srec
|
||
|
|
$ echo -e "S9030000FC\r" >> script.srec
|
||
|
|
$ cat script.srec
|
||
|
|
S0220000687474703A2F2F737265636F72642E736F75726365666F7267652E6E65742F1D
|
||
|
|
S1230000270519566D773EB6649815E30000001700000000000000003DE3D97005070601E2
|
||
|
|
S12300200000000000000000000000000000000000000000000000000000000000000000BC
|
||
|
|
S11A00400000000F0000000068656C6C6F20732D7265636F72640A39
|
||
|
|
S5030003F9
|
||
|
|
S9030000FC
|
||
|
|
$
|
||
|
|
|
||
|
|
The load address in the first S1 record is 0x0000.
|
||
|
|
|
||
|
|
The terminal emulation program picocom is invoked with *cat* as the send
|
||
|
|
command to transfer the file.
|
||
|
|
|
||
|
|
.. code-block::
|
||
|
|
|
||
|
|
picocom --send-cmd 'cat' --baud 115200 /dev/ttyUSB0
|
||
|
|
|
||
|
|
After entering the *loads* command the key sequence <CTRL-A><CTRL-S> is used to
|
||
|
|
let picocom prompt for the file name. Picocom invokes the program *cat* for the
|
||
|
|
file transfer. The loaded script is executed using the *source* command.
|
||
|
|
|
||
|
|
.. code-block::
|
||
|
|
|
||
|
|
=> loads $scriptaddr
|
||
|
|
## Ready for S-Record download ...
|
||
|
|
|
||
|
|
*** file: script.srec
|
||
|
|
$ cat script.srec
|
||
|
|
|
||
|
|
*** exit status: 0 ***
|
||
|
|
|
||
|
|
## First Load Addr = 0x4FC00000
|
||
|
|
## Last Load Addr = 0x4FC0005B
|
||
|
|
## Total Size = 0x0000005C = 92 Bytes
|
||
|
|
## Start Addr = 0x00000000
|
||
|
|
=> source $scriptaddr
|
||
|
|
## Executing script at 4fc00000
|
||
|
|
hello s-record
|
||
|
|
=>
|
||
|
|
|
||
|
|
Configuration
|
||
|
|
-------------
|
||
|
|
|
||
|
|
The command is only available if CONFIG_CMD_LOADS=y. The parameter to set the
|
||
|
|
baud rate is only available if CONFIG_SYS_LOADS_BAUD_CHANGE=y
|
||
|
|
|
||
|
|
Return value
|
||
|
|
------------
|
||
|
|
|
||
|
|
The return value $? is 0 (true) on success, 1 (false) otherwise.
|