Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-14 08:57:58 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/mips/dts/Makefile

42 lines
1.6 KiB
Makefile
Raw Normal View History

SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-06 21:58:06 +00:00
# SPDX-License-Identifier: GPL-2.0+
MIPS: add initial infrastructure for device-tree files Prepare sub-folder for device-tree files. Make support for device-tree on MIPS available in Kbuild/Kconfig. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
2015-12-19 19:20:48 +00:00
mips: rename mach-mt7620 to mach-mtmips Currently mach-mt7620 contains only support for mt7628. To avoid confusion, rename mach-mt7620 to mach-mtmips, which means MediaTek MIPS platforms. MT7620 and MT7628 should be distinguished by SOC_MT7620 and SOC_MT7628 because they do not share the same lowlevel codes. Dependencies of four drivers are changed to SOC_MT7628 as these drivers are only used by MT7628. Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-04-30 03:13:58 +00:00
dtb-$(CONFIG_ARCH_MTMIPS) += \
mips: add missing dtb-y to arch/mips/dts/Makefile Since commit 27cb7300ffda ("Ensure device tree DTS is compiled"), build succeeds irrespective of the correctness of Makefile. In fact, you can compile any defconfig without adding any entry in arch/*/dts/Makefile. I am going to revert that commit, so device tree must be explicitly listed in Makefile. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-03-14 05:58:35 +00:00
gardena-smart-gateway-mt7688.dtb \
linkit-smart-7688.dtb
mips: ath79: add AP121 reference board This patch add board-level code and base DT for AP121. Signed-off-by: Wills Wang <wills.wang@live.com> [updated defconfig, enabled CONFIG_USE_PRIVATE_LIBGCC=y] Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-03-16 08:59:59 +00:00
dtb-$(CONFIG_TARGET_AP121) += ap121.dtb
mips: ath79: add AP143 reference board This patch add board-level code and base DT for AP143. Signed-off-by: Wills Wang <wills.wang@live.com> [updated defconfig, enabled CONFIG_USE_PRIVATE_LIBGCC=y] Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-03-16 09:00:00 +00:00
dtb-$(CONFIG_TARGET_AP143) += ap143.dtb
mips: add initial support for qca956x referenced board QCA9563 is CPU used on AP152 board : Clock speed : 750 MHz , Arch : Mips 74Kc, Eth : SGMII interface, MIMO config : 3 * 3 450M, 2 * USB 2.0, Signed-off-by: Rosy Song <rosysong@rosinson.com> Changes for v2: - coding style cleanup - remove ununsed flash chip in defconfig - enable automatic icache / dcache size in defconfig Changes for v3: - add detailed information for qca956x in commit message Changes for v4: - remove pre-configured network settings in ap152.h Changes for v5: - coding style cleanup
2019-03-16 01:24:44 +00:00
dtb-$(CONFIG_TARGET_AP152) += ap152.dtb
boston: Introduce support for the MIPS Boston development board This patch introduces support for building U-Boot to run on the MIPS Boston development board. This is a board built around an FPGA & an Intel EG20T Platform Controller Hub, used largely as part of the development of new CPUs and their software support. It is essentially the successor to the older MIPS Malta board. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2016-09-08 06:47:39 +00:00
dtb-$(CONFIG_TARGET_BOSTON) += img,boston.dtb
malta: Use device model & tree for UART Make use of device model & device tree to probe the UART driver. This is the initial step in bringing Malta up to date with driver model, and allows for cleaner handling of the different I/O addresses for different system controllers by specifying the ISA bus address instead of a translated memory address. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-05-17 06:43:28 +00:00
dtb-$(CONFIG_TARGET_MALTA) += mti,malta.dtb
board: Add Microchip PIC32MZ[DA]-Starter-Kit board. This adds support for Microchip PIC32MZ[DA] StarterKit board based on a PIC32MZ[DA] family of microcontroller. Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-01-28 10:00:17 +00:00
dtb-$(CONFIG_TARGET_PIC32MZDASK) += pic32mzda_sk.dtb
mips: xilfpga: Add device tree files Mostly the same as the Kernel upstream device tree file except for - alias for the serial console node - ethernet node as the ethernet stuff isn't upstream on kernel.org yet - uart clock-frequency passed directly in the node Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Reviewed-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-07-29 14:11:19 +00:00
dtb-$(CONFIG_TARGET_XILFPGA) += nexys4ddr.dtb
MIPS: add BMIPS Comtrend AR-5315u board Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-01-20 18:16:05 +00:00
dtb-$(CONFIG_BOARD_COMTREND_AR5315U) += comtrend,ar-5315u.dtb
MIPS: add BMIPS Comtrend AR-5387un board Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-04-24 22:39:24 +00:00
dtb-$(CONFIG_BOARD_COMTREND_AR5387UN) += comtrend,ar-5387un.dtb
MIPS: add BMIPS Comtrend CT-5361 board Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-16 16:39:04 +00:00
dtb-$(CONFIG_BOARD_COMTREND_CT5361) += comtrend,ct-5361.dtb
MIPS: add BMIPS Comtrend VR-3032u board Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-04-24 22:39:26 +00:00
dtb-$(CONFIG_BOARD_COMTREND_VR3032U) += comtrend,vr-3032u.dtb
MIPS: add BMIPS Comtrend WAP-5813n board Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-01-20 13:16:56 +00:00
dtb-$(CONFIG_BOARD_COMTREND_WAP5813N) += comtrend,wap-5813n.dtb
MIPS: add BMIPS Huawei HG556a board Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-04-24 22:39:22 +00:00
dtb-$(CONFIG_BOARD_HUAWEI_HG556A) += huawei,hg556a.dtb
MIPS: add BMIPS Netgear CG3100D board Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-16 16:42:43 +00:00
dtb-$(CONFIG_BOARD_NETGEAR_CG3100D) += netgear,cg3100d.dtb
MIPS: add BMIPS Netgear DGND3700v2 board Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-02-03 09:30:28 +00:00
dtb-$(CONFIG_BOARD_NETGEAR_DGND3700V2) += netgear,dgnd3700v2.dtb
MIPS: add BMIPS Sagem F@ST1704 board Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-16 16:46:59 +00:00
dtb-$(CONFIG_BOARD_SAGEM_FAST1704) += sagem,f@st1704.dtb
mips: ath79: Add support for TPLink WDR4300 Add support for the TPLink WDR4300 router, which is based on the AR9344 MIPS 74Kc CPU and has 128 MiB of RAM. The USB is supported on this system as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Wills Wang <wills.wang@live.com>
2016-05-06 18:10:41 +00:00
dtb-$(CONFIG_BOARD_TPLINK_WDR4300) += tplink_wdr4300.dtb
mips: jz47xx: Add Creator CI20 platform Add support for the Creator CI20 platform based on the JZ4780 SoC. Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Marek Vasut <marex@denx.de>
2018-12-16 22:25:23 +00:00
dtb-$(CONFIG_TARGET_JZ4780_CI20) += ci20.dtb
mips: add missing dtb-y to arch/mips/dts/Makefile Since commit 27cb7300ffda ("Ensure device tree DTS is compiled"), build succeeds irrespective of the correctness of Makefile. In fact, you can compile any defconfig without adding any entry in arch/*/dts/Makefile. I am going to revert that commit, so device tree must be explicitly listed in Makefile. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-03-14 05:58:35 +00:00
dtb-$(CONFIG_SOC_BMIPS_BCM6358) += sfr,nb4-ser.dtb
dtb-$(CONFIG_SOC_BMIPS_BCM6838) += brcm,bcm968380gerg.dtb
mips: mscc: luton+ocelot: Remove board config options, do probing As we are moving to multi-dtb and board detection, remove static board config options, and introduce board probing instead. Luton: This add single-binary support for the two MSCC luton-based reference boards - pcb090 and pcb091. The SoC chip ID is used to determine the board type. Ocelot: This add single-binary support for the two MSCC ocelot-based reference boards - pcb120 and pcb123. The PHY ids on specific ports are used to determine the board type. Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
2018-12-20 08:56:05 +00:00
dtb-$(CONFIG_SOC_LUTON) += luton_pcb090.dtb luton_pcb091.dtb
dtb-$(CONFIG_SOC_OCELOT) += ocelot_pcb120.dtb ocelot_pcb123.dtb
MSCC: Add board support for Jaguar2 SOC family Add board support and configuration for Jaguar2 SOC family. The detection of the board type in this family is based on the phy ids. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-12 17:57:00 +00:00
dtb-$(CONFIG_SOC_JR2) += jr2_pcb110.dtb jr2_pcb111.dtb serval2_pcb112.dtb
MSCC: Add board support for Servalt SoC family Add board support, configuration and DTS for Servalt SoC family. Currently there is one board in this family. Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-17 14:33:28 +00:00
dtb-$(CONFIG_SOC_SERVALT) += servalt_pcb116.dtb
MSCC: Add board support for Serval SoC family. Add board support and configuration for Jaguar2 SoC family. The detection of the board type is based on the phy ids. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-01-23 15:39:45 +00:00
dtb-$(CONFIG_SOC_SERVAL) += serval_pcb105.dtb serval_pcb106.dtb
MIPS: add initial infrastructure for device-tree files Prepare sub-folder for device-tree files. Make support for device-tree on MIPS available in Kbuild/Kconfig. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
2015-12-19 19:20:48 +00:00
targets += $(dtb-y)
# Add any required device tree compiler flags here
DTC_FLAGS +=
PHONY += dtbs
dtbs: $(addprefix $(obj)/, $(dtb-y))
@:
clean-files := *.dtb
Reference in a new issue Copy permalink